[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#478720: marked as done ([linux-image-2.6.24-1-686] The Intel 3945ABG wireless led doesn't blink)

Your message dated Wed, 30 Apr 2008 19:40:21 +0200
with message-id <20080430174021.GR27599@baikonur.stro.at>
and subject line Re: Bug#478720: [linux-image-2.6.24-1-686] The Intel 3945ABG wireless led doesn't blink
has caused the Debian Bug report #478720,
regarding [linux-image-2.6.24-1-686] The Intel 3945ABG wireless led doesn't blink
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
478720: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=478720
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- Package: linux-image-2.6.24-1-686
Version: 2.6.24-6
Severity: normal

--- Please enter the report below this line. ---

Dear friends,

The wireless card runs Ok but the led doesn't blink.

Folow my configuration..

Sorry my short english.

Geovane Gonçalves


debian-note:/var/log# lspci | grep 3945
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)

debian-note:/var/log# lshw -short | grep 3945
/0/100/1c.2/0        wmaster0   network     PRO/Wireless 3945ABG Network Connection


debian-note:~/compat-wireless
-2008-04-29# dpkg -l firmware-iwlwifi
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Nome                              Versão                           Descrição
+++-=================================-=================================-==================================================================================
ii  firmware-iwlwifi                  0.10                              Binary firmware for Intel Wireless




debian-note:~/compat-wireless-2008-04-29# lsmod | grep 3945
iwl3945                84148  0
firmware_class          9312  1 iwl3945
mac80211              159608  1 iwl3945
cfg80211               28960  2 iwl3945,mac8021

debian-note:~/compat-wireless-2008-04-29# modinfo iwl3945
filename:       /lib/modules/2.6.24-1-686/updates/drivers/net/wireless/iwlwifi/iwl3945.ko
license:        GPL
author:         Copyright(c) 2003-2008 Intel Corporation
version:        1.2.26k
description:    Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux
srcversion:     249028D74FA3F627B943C80
alias:          pci:v00008086d00004227sv*sd*bc*sc*i*
alias:          pci:v00008086d00004222sv*sd*bc*sc*i*
alias:          pci:v00008086d00004227sv*sd00001014bc*sc*i*
alias:          pci:v00008086d00004222sv*sd00001044bc*sc*i*
alias:          pci:v00008086d00004222sv*sd00001034bc*sc*i*
alias:          pci:v00008086d00004222sv*sd00001005bc*sc*i*
depends:        mac80211,cfg80211,firmware_class
vermagic:       2.6.24-1-686 SMP mod_unload 686
parm:           antenna:select antenna (1=Main, 2=Aux, default 0 [both]) (int)
parm:           disable:manually disable the radio (default 0 [radio on]) (int)
parm:           hwcrypto:using hardware crypto engine (default 0 [software])
 (int)
parm:           debug:debug output mask (int)
parm:           disable_hw_scan:disable hardware scanning (default 0) (int)
parm:           queues_num:number of hw queues. (int)
parm:           qos_enable:enable all QoS functionality (int)

debian-note:~/compat-wireless-2008-04-29# modinfo mac80211
filename:       /lib/modules/2.6.24-1-686/updates/net/mac80211/mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
license:        GPL
author:         Mattias Nissler
author:         Stefano Brivio
description:    PID controller based rate control algorithm
depends:        cfg80211
vermagic:       2.6.24-1-686 SMP mod_unload 686
parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)



--- System information. ---
Architecture: i386
Kernel:       Linux 2.6.24-1-686

Debian Release: lenny/sid
 500 testing         security.debian.org
 500 testing         ftp.br.debian.org
 500 testing         debian-multimedia.org

--- Package information. ---
Depends                       (Version) | Installed
=======================================-+-===============
initramfs-tools              (>= 0.55)  | 0.92
 OR yaird                (>= 0.0.12-8)  |
 OR linux-initramfs-tool                |
module-init-tools                       | 3.4-1




--- End Message ---
--- Begin Message --- 
On Wed, Apr 30, 2008 at 12:48:34PM -0300, Geovane Goncalves wrote:
> 
> Dear friends,
> 
> The wireless card runs Ok but the led doesn't blink.

known, fixed upstream in 2.6.26, will reach Lenny.


so closing for now as upstream bug.

--- End Message ---
Reply to: