linux-2.6_2.6.25-1_amd64.changes is NEW
linux-2.6_2.6.25-1.diff.gz
to pool/main/l/linux-2.6/linux-2.6_2.6.25-1.diff.gz
linux-2.6_2.6.25-1.dsc
to pool/main/l/linux-2.6/linux-2.6_2.6.25-1.dsc
linux-2.6_2.6.25.orig.tar.gz
to pool/main/l/linux-2.6/linux-2.6_2.6.25.orig.tar.gz
(new) linux-doc-2.6.25_2.6.25-1_all.deb optional doc
Linux kernel specific documentation for version 2.6.25
This package provides the various README files and HTML documentation for
the Linux kernel version 2.6.25. Plenty of information, including the
descriptions of various kernel subsystems, filesystems, driver-specific
notes and the like. Consult the file
.
/usr/share/doc/linux-doc-2.6.25/Documentation/00-INDEX
.
for the detailed description of the contents.
(new) linux-headers-2.6.25-1-all-amd64_2.6.25-1_amd64.deb optional devel
All header files for Linux 2.6.25
This package depends against all architecture-specific kernel header files
for Linux kernel version 2.6.25, generally used for building out-of-tree
kernel modules.
(new) linux-headers-2.6.25-1-all_2.6.25-1_amd64.deb optional devel
All header files for Linux 2.6.25
This package depends against all architecture-specific kernel header files
for Linux kernel version 2.6.25, generally used for building out-of-tree
kernel modules.
(new) linux-headers-2.6.25-1-amd64_2.6.25-1_amd64.deb optional devel
Header files for Linux 2.6.25 on AMD64
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.25 on all 64bit single- and multiprocessor AMD and Intel
machines, generally used for building out-of-tree kernel modules. These
files are going to be installed into
/usr/src/linux-headers-2.6.25-1-amd64, and can be used for building
modules that load into the kernel provided by the
linux-image-2.6.25-1-amd64 package.
(new) linux-headers-2.6.25-1-common_2.6.25-1_amd64.deb optional devel
Common header files for Linux 2.6.25
This package provides the architecture-specific common kernel header files
for Linux kernel version 2.6.25, generally used for building out-of-tree
kernel modules. To obtain a complete set of headers you also need to
install the linux-headers-2.6.25-1-(flavour) package, matching the flavour
of the kernel you intend the build for. To obtain such a set for the
currently running kernel it is sufficient to run a command
.
apt-get install linux-headers-$(uname -r)
.
and it will be unpacked in /usr/src/linux-headers-2.6.25-1-(flavour).
(new) linux-image-2.6.25-1-amd64_2.6.25-1_amd64.deb optional admin
Linux 2.6.25 image on AMD64
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.25 on all 64bit single- and multiprocessor AMD and Intel
machines.
linux-libc-dev_2.6.25-1_amd64.deb
to pool/main/l/linux-2.6/linux-libc-dev_2.6.25-1_amd64.deb
(new) linux-manual-2.6.25_2.6.25-1_all.deb optional doc
Linux kernel API manual pages for version 2.6.25
This package provides the Kernel Hacker's Guide in the form of manual
pages, describing the kernel API functions. They are installed into
section 9 of the manual.
.
As the files containing manual pages for different kernel versions are
installed in the same location, only one linux-manual package may be
installed at a time. The linux-doc package containing the documentation
in other formats is free from such restriction.
(new) linux-patch-debian-2.6.25_2.6.25-1_all.deb optional devel
Debian patches to version 2.6.25 of the Linux kernel
This package includes the patches used to produce the prepackaged
linux-source-2.6.25 package, as well as architecture-specific patches.
Note that these patches do NOT apply against a pristine Linux 2.6.25
kernel but only against the kernel tarball linux-2.6_2.6.25.orig.tar.gz
from the Debian archive.
(new) linux-source-2.6.25_2.6.25-1_all.deb optional devel
Linux kernel source for version 2.6.25 with Debian patches
This package provides source code for the Linux kernel version 2.6.25.
This source closely tracks official Linux kernel releases. Debian's
modifications to that source consist of security fixes, bug fixes, and
features that have already been (or we believe will be) accepted by the
upstream maintainers.
.
If you wish to use this package to create a custom Linux kernel, then it
is suggested that you investigate the package kernel-package, which has
been designed to ease the task of creating kernel image packages.
(new) linux-support-2.6.25-1_2.6.25-1_all.deb optional devel
Support files for Linux 2.6.25
This package provides support files for the Linux kernel build.
(new) linux-tree-2.6.25_2.6.25-1_all.deb optional devel
Linux kernel source tree for building Debian kernel images
This meta package is used as a build dependency of Debian linux-image
packages to prevent a version discrepancy between the linux-image and
corresponding linux-sources packages in the fast-moving unstable archive.
The package's dependency relations are structured so that a linux-image
package's build dependencies can always be satisfied, even if the
linux-source package that had been used to compile the image has been
superseeded by a newer Debian revision since the last build.
.
The package provides a list of virtual packages, corresponding to Debian
revisions of a linux-source package. The Debian linux-patch contains the
information needed to roll back the current linux-source to any of the
revisions identified by the provided virtual packages. Therefore, the
linux-tree package ensures the availability of the Linux kernel source
tree corresponding to each of the virtual packages listed.
.
The package serves no purpose outside of the Debian build and archive
infrastructure.
Changes: linux-2.6 (2.6.25-1) unstable; urgency=low
.
* New upstream release (closes: #456799, #468440, #475161, #475134, #475441)
- Add oabi shim for fstatat64 (closes: #462677)
.
[ maximilian attems ]
* topconfig set NOZOMI, CRYPTO_SEQIV, CRYPTO_CTR, CRYPTO_GCM, CRYPTO_CCM,
CRYPTO_SALSA20, CRYPTO_LZO, CRYPTO_DEV_HIFN_795X, USB_SI470X,
USB_STKWEBCAM, VIDEO_PVRUSB2_ONAIR_USB2, VIDEO_PVRUSB2_ONAIR_CREATOR,
VIDEO_EM28XX_ALSA, CRYPTO_DEV_HIFN_795X_RNG, PCF8575, TPS65010, RTL8180,
ENC28J60, R6040, CAN, NETFILTER_XT_MATCH_OWNER, MAC80211_RC_DEFAULT_PI,
NETFILTER_XT_TARGET_RATEEST, NETFILTER_XT_TARGET_TCPOPTSTRIP,
NETFILTER_XT_MATCH_IPRANGE, NETFILTER_XT_MATCH_RATEEST, SND_OXYGEN,
SND_HIFIER, SND_VIRTUOSO, USB_NET_RNDIS_WLAN, USB_ANNOUNCE_NEW_DEVICES,
USB_SERIAL_IUU, NET_CLS_FLOW, INFINIBAND_NES, RTC_DRV_R9701,
RTC_DRV_DS1511, MEMSTICK, SENSORS_W83L786NG, SENSORS_ADS7828, IPWIRELESS,
RISCOM8, IGB, UTS_NS, IPC_NS, IPV6_ROUTE_INFO, ENCLOSURE_SERVICES,
SCSI_ENCLOSURE, SENSORS_ADT7473, SCSI_MVSAS, REALTEK_PHY, RTC_DRV_S35390A,
MEMSTICK_JMICRON_38X, IWL4965_HT.
* [amd64] Enable CRYPTO_SALSA20_X86_64, EDAC_I3000, EFI, EFI_VARS, I8K,
PARAVIRT_GUEST, PARAVIRT, VIRTIO_PCI, VIRTIO_BALLOON, SPARSEMEM_VMEMMAP.
* [amd64, i386]: Enable LEDS_CLEVO_MAIL, INPUT_APANEL, ACER_WMI,
THINKPAD_ACPI_HOTKEY_POLL, HP_WATCHDOG, THINKPAD_ACPI_VIDEO,
VIRTION_CONSOLE, ACPI_WMI, IO_DELAY_0X80.
* topconfig disable PARPORT_PC_FIFO due to instabilities.
(closes: #366165, #388309, #406056, #407816, #453911)
* [amd64, i386]: Enable SONYPI_COMPAT for better sony laptop support.
* topconfig: Enable HID_FF for some HID devices. (closes: #441348)
* topconfig: Enable IPV6_ROUTER_PREF for multi-homed net. (closes: #449247)
* topconfig: Set UTF8 as default encoding. (closes: #417324)
* Tighten yaird dependency. (closes: #403171)
* Configs general cleanup, centralize USB_NET, disable IRDA_DEBUG.
* postinst: Nuke confusing postinst message. (closes: #465512)
* [sparc]: Enable SCSI_SCAN_ASYNC.
* [i386]: Enable TC1100_WMI, SND_SIS7019, CRYPTO_SALSA20_586.
* topconfig: Centralize old IEEE80211 stack options. (closes: #470558)
* control.source.in: Newer standard version without changes.
* copyright: adapt to latest lintian recommendation.
* input: Add 4 additional exports for modular speakup and braille support.
* firewire: Add firewire-git.patch for latest firewire tree features.
* 686: Set USB_PERSIST for eee pc suspend support. (closes: #468213)
* topconfig disable PATA_SIS as sis5513 enabled. (closes: #475525)
* [xen]: Support direct load of bzImage under Xen. (closes: #474509)
Thanks Ian Campbell <ijc@hellion.org.uk> for patches.
* [xen]: Module autoprobing support for frontend drivers.
* [arm]: Don't ovverride topconfig SENSORS_W83792D setting.
(closes: #477745)
.
[ Martin Michlmayr ]
* [arm/armel] Add a kernel for Orion based devices, such as the QNAP
TS-109/TS-209.
* [mips(el)/sb1*] Enable SB1250_MAC (thanks Thomas Bogendoerfer).
* [mipsel/r5k-cobalt] Enable DUMMY_CONSOLE since this might
fix the debian-installer startup hang on Qube 2700.
* [arm/footbridge] Disable KEYS and SECURITY for smaller d-i image.
* [arm/footbridge] Build NFS as a module to make the image smaller.
* [mips/r5k-ip32] Don't build in NFS.
* [mips/r5k-ip32] Use the generic config options for NFS, which will
enable NFSv4. (closes: #471007)
* [mips/r5k-ip32] Enable R8169, requested by Giuseppe Sacco.
* [arm/iop32x] Enable MACH_EM7210. (closes: #473136)
* [arm/orion] Add patch to set the MAC address on QNAP TS-109/TS-209
(Lennert Buytenhek).
* [arm/orion] Add support for Buffalo Linkstation Pro/Live (Byron Bradley).
* [arm/orion] Fix hang when Write Allocate is enabled (Lennert Buytenhek).
* [arm/orion] Add support for QNAP TS-409 (Sylver Bruneau).
* [arm/orion] Add preliminary support for HP mv2120.
.
[ Daniel Baumann ]
* Added patch from unionfs upstream to export release_open_intent symbol.
.
[ Gordon Farquharson ]
* [arm/ixp4xx] Use GPIO LED driver as opposed to ixp4xx LED driver.
* [arm/ixp4xx] Fix ixp4xx-beeper module so that udev loads it
automatically.
* [arm/iop32x] Enable support for the GLAN Tank flash chip (M29W400DB).
* [arm/iop32x] Do not build the ARTOP PATA driver (PATA_ARTOP).
* [arm/iop32x] Register the F75375 device in the GLAN Tank platform code.
* Prevent physmap from calling request_module() too early.
* [arm/ixp4xx] Fix used_sram_bitmap corruption in qmgr_release_queue().
.
[ Aurelien Jarno ]
* [mips/mipsel] Enable CONFIG_NO_HZ, CONFIG_HIGH_RES_TIMERS for dynticks
and true high-resolution timers on 4kc-malta and 5kc-malta flavours.
* [i386, amd64] Set modular VIRTIO, VIRTIO_RING, VIRTIO_BLK, VIRTIO_NET.
.
[ Bastian Blank ]
* Remove binary only firmwares for:
- Broadcom NetXtremeII 10Gb support
* Disable now broken drivers:
- Broadcom NetXtremeII 10Gb support
* Fix broken drivers:
- Broadcom NetXtremeII support
* [powerpc] Use new wrapper install support.
* [s390] Enable DM_MULTIPATH_EMC.
* Enable AF_RXRPC, RXKAD, PRINTK_TIME, DEBUG_KERNEL, SCHED_DEBUG,
TIMER_STATS, DEBUG_FS.
* Disable R3964, USB_GADGET.
* [hppa] Enable several filesystems.
* Make NLS modular.
* [i386/486] Make ext2 modular.
* [alpha,amd64,i386] Make ATM modular.
* [powerpc/powerpc64] Support PA Semi based plattforms. (closes: #463200)
* Follow upstream change for default TCP congestion control.
(closes: #477589)
.
[ Steve Langasek ]
* topconfig: Enable CONFIG_CIFS_WEAK_PW_HASH, required for compatibility
with legacy (pre-NTLM) fileservers.
.
[ Christian Perrier ]
* Debconf template rewrite + mark them as translatable.
Thanks to Justin B Rye <jbr@edlug.org.uk> for review.
Override entries for your package:
linux-2.6_2.6.25-1.dsc - source devel
linux-libc-dev_2.6.25-1_amd64.deb - optional devel
Announcing to debian-devel-changes@lists.debian.org
Closing bugs: 366165 388309 403171 406056 407816 417324 441348 449247 453911 456799 462677 463200 465512 468213 468440 470558 471007 473136 474509 475134 475161 475441 475525 477589 477745
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
Reply to: