[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#477727: marked as done (linux-image-2.6.24-1-686: ich5 sound works in ubuntu but doesn't in lenny)



Your message dated Fri, 25 Apr 2008 12:35:19 +0200
with message-id <20080425103519.GE27599@baikonur.stro.at>
and subject line Re: Bug#477727: it works
has caused the Debian Bug report #477727,
regarding linux-image-2.6.24-1-686: ich5 sound works in ubuntu but doesn't in lenny
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
477727: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=477727
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.24-1-686
Version: 2.6.24-5
Severity: normal

There is no sound output at all. No error messages,either. It's as if 
the mixer volume was 0, but playing with the volume sliders doesn'T 
change anything, either

-- Package-specific info:
** Version:
Linux version 2.6.24-1-686 (Debian 2.6.24-5) (waldi@debian.org) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Thu Mar 27 17:45:04 UTC 2008

** Command line:
root=/dev/mapper/volume-root ro 

** Not tainted

** Kernel log:
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: HID 062a:0000 as /class/input/input1
input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.2-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ata1.00: ATA-7: SAMSUNG SP0812C, SU100-34, max UDMA7
ata1.00: 156368016 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP0812C  SU10 PQ: 0 ANSI: 5
ICH5: IDE controller (0x8086:0x24db rev 0x02) at  PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH5: 100% native mode on irq 18
    ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 156368016 512-byte hardware sectors (80060 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156368016 512-byte hardware sectors (80060 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<5>firewire_core: created new fw device fw0 (0 config rom retries, S400)
hda: IDE-DVD ROM 6116, ATAPI CD/DVD-ROM drive
 sda1<7>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
 sda2 sda3 <<6>hda: UDMA/33 mode selected
ide0 at 0xc800-0xc807,0xc402 on irq 18
Probing IDE interface ide1...
 sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
hda: ATAPI 16X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
Attempting manual resume
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
ReiserFS: dm-0: using ordered data mode
ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-0: checking transaction log (dm-0)
ReiserFS: dm-0: Using r5 hash to sort names
Linux agpgart interface v0.102
agpgart: Detected an Intel 865 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 22
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: FWH not detected
input: Power Button (FF) as /class/input/input2
input: PC Speaker as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
Real Time Clock Driver v1.12ac
gameport: EMU10K1 is pci0000:03:00.1/gameport0, io 0xac00, speed 1065kHz
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
loop: module loaded
ReiserFS: sda5: found reiserfs format "3.6" with standard journal
ReiserFS: sda5: using ordered data mode
ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda5: checking transaction log (sda5)
ReiserFS: sda5: Using r5 hash to sort names
ReiserFS: dm-4: found reiserfs format "3.6" with standard journal
ReiserFS: dm-4: using ordered data mode
ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-4: checking transaction log (dm-4)
ReiserFS: dm-4: Using r5 hash to sort names
ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
ReiserFS: dm-1: using ordered data mode
ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-1: checking transaction log (dm-1)
ReiserFS: dm-1: Using r5 hash to sort names
ReiserFS: dm-2: found reiserfs format "3.6" with standard journal
ReiserFS: dm-2: using ordered data mode
ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-2: checking transaction log (dm-2)
ReiserFS: dm-2: Using r5 hash to sort names
Adding 3145720k swap on /dev/mapper/volume-swap.  Priority:-1 extents:1 across:3145720k
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
cdrom: This disc doesn't have any tracks I recognize!
eth0: no IPv6 routers present
UDF-fs: No VRS found
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
cdrom: This disc doesn't have any tracks I recognize!

** Loaded modules:
Module                  Size  Used by
nls_iso8859_1           4128  1 
isofs                  32996  1 
zlib_inflate           14560  1 isofs
udf                    77668  0 
ipv6                  240836  14 
ppdev                   8804  0 
lp                     11076  0 
ac                      6116  0 
battery                13572  0 
speedstep_lib           5348  0 
cpufreq_powersave       1856  0 
cpufreq_stats           5184  0 
cpufreq_userspace       4260  0 
cpufreq_ondemand        8492  0 
cpufreq_conservative     7560  0 
freq_table              4512  2 cpufreq_stats,cpufreq_ondemand
loop                   16804  0 
firewire_sbp2          14252  0 
snd_emu10k1_synth       6944  0 
snd_emux_synth         31136  1 snd_emu10k1_synth
snd_seq_virmidi         6784  1 snd_emux_synth
snd_seq_midi_emul       5920  1 snd_emux_synth
snd_emu10k1           125600  2 snd_emu10k1_synth
snd_seq_dummy           3780  0 
snd_seq_oss            29472  0 
snd_seq_midi            8160  0 
snd_seq_midi_event      6976  3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_seq                46544  9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_rawmidi            22624  3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
firmware_class          9312  1 snd_emu10k1
snd_ac97_codec         92932  1 snd_emu10k1
ac97_bus                2176  1 snd_ac97_codec
snd_pcm_oss            38272  0 
snd_mixer_oss          15296  1 snd_pcm_oss
snd_pcm                71780  3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_seq_device          7820  8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
snd_timer              21092  3 snd_emu10k1,snd_seq,snd_pcm
snd_page_alloc         10056  2 snd_emu10k1,snd_pcm
snd_util_mem            4544  2 snd_emux_synth,snd_emu10k1
snd_hwdep               8804  2 snd_emux_synth,snd_emu10k1
snd                    48612  15 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_seq_oss,snd_seq,snd_rawmidi,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep
parport_pc             33668  1 
parport                34280  3 ppdev,lp,parport_pc
soundcore               7552  1 snd
emu10k1_gp              3744  0 
gameport               14472  2 emu10k1_gp
rtc                    13052  0 
pcspkr                  3200  0 
button                  8432  0 
shpchp                 31028  0 
pci_hotplug            27712  1 shpchp
iTCO_wdt               11268  0 
i2c_i801                9232  0 
i2c_core               22432  1 i2c_i801
intel_agp              23412  1 
agpgart                31688  1 intel_agp
evdev                  11104  3 
reiserfs              210976  5 
dm_mirror              21600  0 
dm_snapshot            16964  0 
dm_mod                 55812  13 dm_mirror,dm_snapshot
ide_cd                 36224  1 
cdrom                  32512  1 ide_cd
sd_mod                 27200  3 
piix                    7492  0 [permanent]
usbhid                 28096  0 
hid                    34272  1 usbhid
generic                 4388  0 [permanent]
ide_core              108292  3 ide_cd,piix,generic
ata_piix               17092  2 
floppy                 54628  0 
firewire_ohci          17760  0 
firewire_core          39232  2 firewire_sbp2,firewire_ohci
crc_itu_t               2176  1 firewire_core
ata_generic             7428  0 
libata                144464  2 ata_piix,ata_generic
scsi_mod              141164  3 firewire_sbp2,sd_mod,libata
e1000                 112864  0 
ehci_hcd               32524  0 
uhci_hcd               23376  0 
usbcore               132940  4 usbhid,ehci_hcd,uhci_hcd
thermal                16028  0 
processor              36520  1 thermal
fan                     4772  0 

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller [8086:2571] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	Memory behind bridge: fc800000-fe8fffff
	Prefetchable memory behind bridge: e7f00000-f7efffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:03.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to CSA Bridge [8086:2573] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: fe900000-fe9fffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. 865PE Neo2 (MS-6728) [1462:7280]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at cc00 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. 865PE Neo2 (MS-6728) [1462:7280]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at d000 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. 865PE Neo2 (MS-6728) [1462:7280]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at d400 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. 865PE Neo2 (MS-6728) [1462:7280]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at d800 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Micro-Star International Co., Ltd. 865PE Neo2 (MS-6728) [1462:7280]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 19
	Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
	Latency: 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: fea00000-feafffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel modules: intel-rng, iTCO_wdt

00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Micro-Star International Co., Ltd. 865PE Neo2 (MS-6728) [1462:7280]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at c800 [size=8]
	Region 1: I/O ports at c400 [size=4]
	Region 2: I/O ports at c000 [size=8]
	Region 3: I/O ports at bc00 [size=4]
	Region 4: I/O ports at b800 [size=16]
	Region 5: Memory at 70000000 (32-bit, non-prefetchable) [size=1K]
	Kernel driver in use: PIIX_IDE
	Kernel modules: piix

00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at ec00 [size=8]
	Region 1: I/O ports at e800 [size=4]
	Region 2: I/O ports at e400 [size=8]
	Region 3: I/O ports at e000 [size=4]
	Region 4: I/O ports at dc00 [size=16]
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. 865PE Neo2 (MS-6728) [1462:7280]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 22
	Region 4: I/O ports at 0c00 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV28 [GeForce4 Ti 4200 AGP 8x] [10de:0281] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:8891]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at fe8e0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel modules: nvidiafb

02:01.0 Ethernet controller [0200]: Intel Corporation 82547EI Gigabit Ethernet Controller [8086:1019]
	Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:728c]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0 (63750ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fe9e0000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at 9c00 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000
	Kernel modules: e1000

03:00.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1 [1102:0002] (rev 08)
	Subsystem: Creative Labs CT4760 SBLive! [1102:8040]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (500ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at a800 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: EMU10K1_Audigy
	Kernel modules: snd-emu10k1

03:00.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 08)
	Subsystem: Creative Labs Gameport Joystick [1102:0020]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Region 0: I/O ports at ac00 [size=8]
	Capabilities: <access denied>
	Kernel driver in use: Emu10k1_gameport
	Kernel modules: emu10k1-gp

03:0a.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev 46) (prog-if 10 [OHCI])
	Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:565d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (8000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at feafd800 (32-bit, non-prefetchable) [size=2K]
	Region 1: I/O ports at a400 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire-ohci



-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.24-1-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.24-1-686 depends on:
ii  debconf [debconf-2.0]         1.5.20     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92       tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.24-1-686 recommends:
ii  libc6-i686                    2.7-10     GNU C Library: Shared libraries [i

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
  linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
  linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
  linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
  linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
  linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
  linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
  linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
  linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
  linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
  linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
  linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
  linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:
  linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true



--- End Message ---
--- Begin Message ---
Version: 2.6.24-1

On Fri, Apr 25, 2008 at 02:06:07PM +0200, Jonas Schoerter wrote:
> sorry poeple it works now
> 

closing.


--- End Message ---

Reply to: