Package: linux-image-2.6.24-1-sb1-bcm91250a
Version: 2.6.24-4
Arch: mipsel
Hi,
running on a Broadcom SB1 *little endian* the kernel hangs trying to run
init. The old 2.6.17 works (linux-image-2.6.17-1-sb1 version 2.6.17-5):
Set up command line arguments to: root=/dev/hda3 console=duart0
Setting up initial prom_init arguments
Cleaning up state...
Transferring control to the kernel.
Kernel entry point is at 0x80404b00
Initializing cgroup subsys cpuset
Linux version 2.6.24-1-sb1-bcm91250a (Debian 2.6.24-4) (waldi@debian.org) (gcc version 4.1.3 20071208
console [early0] enabled
CPU revision is: 01040102 (SiByte SB1)
FPU revision is: 000f0102
Broadcom SiByte BCM1250 B2 @ 800 MHz (SB1 rev 2)
Board type: SiByte BCM91250A (SWARM)
This kernel optimized for board runs with CFE
Determined physical RAM map:
memory: 000000000fe48e00 @ 0000000000000000 (usable)
memory: 000000000ffffe00 @ 0000000080000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
DMA32 0 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 65096
0: 524288 -> 589823
Detected 1 available secondary CPU(s)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 122568
Kernel command line: root=/dev/hda3 console=duart0
Primary instruction cache 32kB, VIVT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Synthesized TLB refill handler (45 instructions).
Synthesized TLB load handler fastpath (59 instructions).
Synthesized TLB store handler fastpath (54 instructions).
Synthesized TLB modify handler fastpath (53 instructions).
PID hash table entries: 2048 (order: 11, 16384 bytes)
Console: colour dum7���ͽ���handover: boot [early0] -> real [duart0]
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Memory: 483204k/522524k available (3114k kernel code, 38732k reserved, 930k data, 196k init, 0k high)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Checking for the multiply/shift bug... no.
Checking for the daddi bug... no.
Checking for the daddiu bug... no.
CPU revision is: 03040102 (SiByte SB1)
FPU revision is: 000f0102
Primary instruction cache 32kB, VIVT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Synthesized TLB refill handler (45 instructions).
Brought up 2 CPUs
net_namespace: 120 bytes
NET: Registered protocol family 16
registering PCI controller with io_map_base unset
NET: Registered protocol family 2
Time: bcm1250-counter-3 clocksource has been installed.
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1203668933.428:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
duart0 at MMIO 0x10060100 (irq = 8) is a SB1250 DUART
duart1 at MMIO 0x10060200 (irq = 9) is a SB1250 DUART
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SWARM IDE driver
ide-swarm: IDE interface at GenBus slot 4
hda: MAXTOR 6L040J2, ATA DISK drive
ide0 at 0x90000000100b3e00-0x90000000100b3e07,0x90000000100b7ec0 on irq 36
hda: max request size: 128KiB
hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
registered taskstats version 1
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 196k freed
--
Florian Lohoff flo@rfc822.org +49-171-2280134
Those who would give up a little freedom to get a little
security shall soon have neither - Benjamin Franklin
Attachment:
signature.asc
Description: Digital signature