Kernel 2.6.18-5 and SATA II drives
i have recently installed the latest distribution of Debian 4.0 with the default kernel version 2.6.18-5. the system worked just fine in the few first hours but then, "suddenly" things went wrong. i couldn't execute any command (like: reboot, uptime, etc.) anymore. it says:
ls: reading directory .: Input/output error
bash: /sbin/reboot: Input/output error
The output of /var/log/syslog looks like:
Sep 22 09:04:36 serv kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
Sep 22 09:04:36 serv kernel: ata1.00: (BMDMA stat 0x0)
Sep 22 09:04:36 serv kernel: ata1.00: tag 0 cmd 0xca Emask 0x4 stat 0x40 err 0x0 (timeout)
Sep 22 09:04:38 serv kernel: ata1: soft resetting port
Sep 22 09:04:45 serv kernel: ata1.00: configured for UDMA/133
Sep 22 09:04:45 serv kernel: ata1: EH complete
Sep 22 09:04:45 serv kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
Sep 22 09:04:45 serv kernel: sda: Write Protect is off
Sep 22 09:04:45 serv kernel: sda: Mode Sense: 00 3a 00 00
Sep 22 09:04:45 serv kernel: SCSI device sda: drive cache: write back
I even replaced the hard-drive but the problem seems to persist.
I got to the conclusion that there might be some problems with the SATA modules in the kernel.
I intend to install the latest version of kernel yet available (the 2.6.23). What do you guys advise me to do?
Is this kernel (2.6.23) good enough to be used on my system?
My system description:
Intel SR1530SH - Server platform 1U
CPU: Intel Xeon
FSB (MHz): 1333/1066/800
Motherboard: S3000SH L SKU
Chipset: Intel 3200
Memory: 2 x DDR2 667/800MHz
HDD: Seagate 400GB, 7200.10 Baracuda, SATA II
Reply to: