Bug#441260: linux-image-2.6-k7: skge driver does not support SK-9872 card.
Package: linux-image-2.6-k7
Version: 2.6.18+6etch2
Severity: important
The skge driver in the 2.6.18-5-k7 kernel does not appear to support
the SysKonnect SK-9872 GigE adaptor. This card was supported by the
sk98lin driver, and it my impression from searching on Google that
this may simply be a matter of the new skge driver not having the
needed product ID information.
Here is the log entry created
when the driver loads:
Sep 6 13:51:28 npad kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI
16 (leve
l, low) -> IRQ 185
Sep 6 13:51:28 npad kernel: skge 0000:00:08.0: unsupported phy type 0x0
Sep 6 13:51:28 npad kernel: ACPI: PCI interrupt for device 0000:00:08.0
disable
d
Sep 6 13:51:28 npad kernel: skge: probe of 0000:00:08.0 failed with
error -95
And the relevant portion of lspci -vv.
00:08.0 Ethernet controller: SysKonnect SK-9872 Gigabit Ethernet Server
Adapter (SK-NET GE-ZX dual link) (rev 12)
Subsystem: SysKonnect SK-9843 Gigabit Ethernet Server Adapter
(SK-NET GE-SX)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 189 (5750ns min, 7750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f4000000 (32-bit, non-prefetchable)
[size=16K]
Region 1: I/O ports at 1000 [size=256]
[virtual] Expansion ROM at 50000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (990, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16.2-web100
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages linux-image-2.6-k7 depends on:
ii linux-image-2.6.18 2.6.18.dfsg.1-13etch2 Linux 2.6.18 image on AMD K7
linux-image-2.6-k7 recommends no packages.
-- no debconf information
Reply to: