--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.18-1-686: error detecting pci devices on Clevo D631S laptop
- From: Kavalerchik Family <nadavkav@gmail.com>
- Date: Mon, 20 Nov 2006 18:56:16 +0200
- Message-id: <200611201856.16934.nadavkav@gmail.com>
Package: linux-image-2.6.18-1-686
Version: 2.6.18-3
Severity: important
*** Please type your report below this line ***
i'm getting these warrning or errors while booting (dmesg output) a Clevo
D631S laptop
PCI: Cannot allocate resource region 1 of device 0000:00:0a.0
PCI: Cannot allocate resource region 0 of device 0000:00:02.6
PCI: Cannot allocate resource region 0 of device 0000:00:0b.0
PCI: Cannot allocate resource region 1 of device 0000:00:0b.0
is it ok ?
lspci output for the specific devices:
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev
a0)
00:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
Controller (PHY/Link)
i'm attaching dmesg and full lspci outputs as well.
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-1-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=he_IL.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6.18-1-686 depends on:
ii initramfs-tools [linux-initra 0.85a tools for generating an initramfs
ii module-init-tools 3.2.2-3 tools for managing Linux kernel
mo
Versions of packages linux-image-2.6.18-1-686 recommends:
ii libc6-i686 2.3.6.ds1-7 GNU C Library: Shared libraries
[i
-- debconf information:
linux-image-2.6.18-1-686/postinst/bootloader-error-2.6.18-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.18-1-686/postinst/depmod-error-initrd-2.6.18-1-686: false
linux-image-2.6.18-1-686/postinst/create-kimage-link-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/initrd-2.6.18-1-686:
linux-image-2.6.18-1-686/preinst/abort-overwrite-2.6.18-1-686:
linux-image-2.6.18-1-686/preinst/elilo-initrd-2.6.18-1-686: true
linux-image-2.6.18-1-686/postinst/old-initrd-link-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/already-running-this-2.6.18-1-686:
linux-image-2.6.18-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.18-1-686/postinst/bootloader-test-error-2.6.18-1-686:
linux-image-2.6.18-1-686/postinst/depmod-error-2.6.18-1-686: false
linux-image-2.6.18-1-686/postinst/old-dir-initrd-link-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/overwriting-modules-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/failed-to-move-modules-2.6.18-1-686:
linux-image-2.6.18-1-686/preinst/lilo-initrd-2.6.18-1-686: true
linux-image-2.6.18-1-686/prerm/removing-running-kernel-2.6.18-1-686: true
linux-image-2.6.18-1-686/postinst/old-system-map-link-2.6.18-1-686: true
linux-image-2.6.18-1-686/prerm/would-invalidate-boot-loader-2.6.18-1-686:
true
linux-image-2.6.18-1-686/preinst/bootloader-initrd-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/abort-install-2.6.18-1-686:
linux-image-2.6.18-1-686/postinst/kimage-is-a-directory:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 650/M650 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS961 [MuTIOL Media IO]
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
00:0c.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter
02:00.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
Linux version 2.6.18-1-686 (Debian 2.6.18-3) (waldi@debian.org) (gcc version 4.1.2 20061007 (prerelease) (Debian 4.1.1-16)) #1 SMP Sat Oct 21 17:21:28 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
BIOS-e820: 000000001bef0000 - 000000001beff000 (ACPI data)
BIOS-e820: 000000001beff000 - 000000001bf00000 (ACPI NVS)
BIOS-e820: 000000001bf00000 - 000000001c000000 (usable)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
448MB LOWMEM available.
On node 0 totalpages: 114688
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 110592 pages, LIFO batch:31
DMI not present or invalid.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7130
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1befbb1e
ACPI: FADT (v001 SiS 650 0x06040000 PTL 0x000f4240) @ 0x1befef8c
ACPI: DSDT (v001 Clevo 650 0x06040000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 20000000 (gap: 1c000000:e3f80000)
Detected 2191.143 MHz processor.
Built 1 zonelists. Total pages: 114688
Kernel command line: root=/dev/hda1 ro pci=routeirq lapic quiet
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 446260k/458752k available (1543k kernel code, 11880k reserved, 574k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4385.99 BogoMIPS (lpj=8771988)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0800 (from 0c20)
CPU0: Intel(R) Pentium(R) 4 CPU 2.20GHz stepping 04
SMP motherboard not detected.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 5223k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS961 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
ACPI: Embedded Controller [EC] (gpe 23) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
PCI: Cannot allocate resource region 1 of device 0000:00:0a.0
PCI: Cannot allocate resource region 0 of device 0000:00:02.6
PCI: Cannot allocate resource region 0 of device 0000:00:0b.0
PCI: Cannot allocate resource region 1 of device 0000:00:0b.0
pnp: 00:04: ioport range 0x8000-0x807f could not be reserved
pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:04: ioport range 0xfe00-0xfe00 has been reserved
pnp: 00:04: ioport range 0x3f0-0x3f1 has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: ec100000-ec1fffff
PREFETCH window: f0000000-f7ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0c.0
IO window: 00002400-000024ff
IO window: 00002800-000028ff
PREFETCH window: 20000000-21ffffff
MEM window: 22000000-23ffffff
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1164018805.936:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
PCI: Enabling device 0000:00:02.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:02.6 disabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (65 C)
ieee1394: Initialized config rom entry `ip1394'
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0x1400, 00:90:f5:12:1e:b3, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
PCI: Enabling device 0000:00:0b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[24005000-240057ff] Max Packet=[2048] IR/IT contexts=[4/8]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 961 MuTIOL IDE UDMA100 controller
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
hda: HTS548040M9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090f50000121eb3]
hdc: TOSHIBA DVD-ROM SD-R2212, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.2: OHCI Host Controller
ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.2: irq 11, io mem 0xec000000
hda: max request size: 512KiB
hda: 78140160 sectors (40007 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 <<6>usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
hda5 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:02.3: OHCI Host Controller
ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.3: irq 10, io mem 0xec001000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
Attempting manual resume
usb 1-1: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /class/input/input1
input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:02.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12ac
ts: Compaq touchscreen protocol output
Linux agpgart interface v0.101 (c) Dave Jones
input: PC Speaker as /class/input/input2
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4201]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Yenta: ISA IRQ mask 0x02d8, PCI irq 5
Socket status: 30000068
agpgart: Detected SiS 650 chipset
agpgart: AGP aperture is 64M @ 0xe8000000
PCI: Enabling device 0000:00:02.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8080
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
PCI: Enabling device 0000:00:02.7 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
Synaptics Touchpad, model: 1, fw: 5.6, id: 0x9244b1, caps: 0x80471b/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input3
pccard: CardBus card inserted into slot 0
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
intel8x0_measure_ac97_clock: measured 60396 usecs
intel8x0: clocking to 48000
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
PCI: Setting latency timer of device 0000:02:00.0 to 64
Adding 1421712k swap on /dev/hda5. Priority:-1 extents:1 across:1421712k
EXT3 FS on hda1, internal journal
loop: loaded (max 8 devices)
SCSI subsystem initialized
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
[drm] Initialized drm 1.0.1 20051102
sisfb: Video ROM found
sisfb: Video RAM at 0xf0000000, mapped to 0xdcc80000, size 65536k
sisfb: MMIO at 0xec100000, mapped to 0xdcbc0000, size 128k
sisfb: Memory heap starting at 64928K, size 32K
sisfb: Detected LVDS transmitter
sisfb: Detected Chrontel TV encoder
sisfb: Detected 1024x768 flat panel
sisfb: Default mode is 1024x768x8 (60Hz)
sisfb: Initial vbflags 0x3000012
Console: switching to colour frame buffer device 128x48
sisfb: 2D acceleration is enabled, y-panning enabled (auto-max)
fb0: SiS 650 frame buffer device version 1.8.9
sisfb: Copyright (C) 2001-2005 Thomas Winischhofer
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
eth0: link down
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6 over IPv4 tunneling driver
powernow: This module only works with AMD K7 CPUs
eth2: no IPv6 routers present
eth2: no IPv6 routers present
--- End Message ---