--- Begin Message ---
Package: installation-reports
Boot method: CD
Image version: debian-31r1a-i386-netinst.iso 05-12-24
from //cdimage.debian.org
Date (yy-mm-dd): 05-12-24 03:17pm
Machine: Own assembly
Processor: Intel(R) EM64T Pentium(R) 4 CPU 3.20GHz
Memory: 1 GB DDR RAM
Partitions:
Dateisystem Typ 1K-Blöcke Benutzt Verfügbar Ben% Eingehängt auf
/dev/sda3 ext3 76896348 10322652 62667492 15% /
tmpfs tmpfs 517056 0 517056 0% /dev/shm
/dev/sda2 ext3 83095060 10438688 68435296 14% /media/sda2
/dev/sda4 ext3 80234664 9231508 66927468 13% /media/sda4
tmpfs tmpfs 10240 96 10144 1% /dev
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to
I/O Controller (rev 04)
0000:00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL PCI Express
Root Port (rev 04)
0000:00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) High Definition Audio Controller (rev 03)
0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
PCI Express Port 1 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
PCI Express Port 2 (rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC
Interface Bridge (rev 03)
0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) IDE Controller (rev 03)
0000:00:1f.2 IDE interface: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA
Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
SMBus Controller (rev 03)
0000:01:04.0 Mass storage controller: Integrated Technology Express, Inc.
IT/ITE8212 Dual channel ATA RAID controller (PCI version seems to be IT8212,
embedded seems (rev 13)
0000:01:0a.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless
Interface
0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E
Gigabit Ethernet Controller (rev 19)
0000:04:00.0 VGA compatible controller: ATI Technologies Inc R423 UK [Radeon
X800SE (PCIE)]
0000:04:00.1 Display controller: ATI Technologies Inc Radeon R423 UK (PCIE)
[X800 SE] (Secondary)
0000:00:00.0 0600: 8086:2580 (rev 04)
0000:00:01.0 0604: 8086:2581 (rev 04)
0000:00:1b.0 0403: 8086:2668 (rev 03)
0000:00:1c.0 0604: 8086:2660 (rev 03)
0000:00:1c.1 0604: 8086:2662 (rev 03)
0000:00:1d.0 0c03: 8086:2658 (rev 03)
0000:00:1d.1 0c03: 8086:2659 (rev 03)
0000:00:1d.2 0c03: 8086:265a (rev 03)
0000:00:1d.3 0c03: 8086:265b (rev 03)
0000:00:1d.7 0c03: 8086:265c (rev 03)
0000:00:1e.0 0604: 8086:244e (rev d3)
0000:00:1f.0 0601: 8086:2640 (rev 03)
0000:00:1f.1 0101: 8086:266f (rev 03)
0000:00:1f.2 0101: 8086:2652 (rev 03)
0000:00:1f.3 0c05: 8086:266a (rev 03)
0000:01:04.0 0180: 1283:8212 (rev 13)
0000:01:0a.0 0280: 104c:9066
0000:02:00.0 0200: 11ab:4362 (rev 19)
0000:04:00.0 0300: 1002:554b
0000:04:00.1 0380: 1002:556b
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [E]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
The LAN Driver Module sk98lin needed for the Marvell Technology Group Ltd.
88E8053 PCI-E Gigabit Ethernet Controller (rev 19) in chipset Intel 915G
could not be inserted.
This chipset is wide-spread with Intel P4 machines and there are working
versions of sk98lin delivered with modified debian kernels. See, e.
g., //kanotix.com or //debian.tu-bs.de/project/kanotix/kernel/ . I believe
that it would increase the acceptance of Debian linux very much if they could
provide for working lan drivers for 915G.
--- End Message ---