Bug#435268: linux-image-2.6.22-1-k7: Thelatest package of the image cannot be installed
Package: linux-image-2.6.22-1-k7
Version: 2.6.22-3
Severity: important
-- Package-specific info:
** Version:
Linux version 2.6.22-1-k7 (Debian 2.6.22-3) (waldi@debian.org) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 SMP Sun Jul 29 15:15:55 UTC 2007
** Tainted: PFSRMB
** Kernel log:
bttv0: Hauppauge eeprom indicates model#0
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 1-0060: All bytes are equal. It is not a TEA5767
tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
tuner 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
PCI: Enabling device 0000:00:11.5 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:11.5 to 64
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
PCI: Enabling device 0000:00:0d.1 (0004 -> 0006)
ACPI: PCI Interrupt 0000:00:0d.1[A] -> GSI 16 (level, low) -> IRQ 19
bt878_probe: card id=[0x0], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:00:0d.1 disabled
bt878: probe of 0000:00:0d.1 failed with error -22
usb 1-1: new low speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
usb 1-2: new full speed USB device using uhci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: USB Mouse as /class/input/input2
input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:10.0-1
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x018C
input: HID 0583:668f as /class/input/input3
input: USB HID v1.00 Joystick [HID 0583:668f] on usb-0000:00:10.1-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
scsi3 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k
EXT3 FS on hda3, internal journal
PPP generic driver version 2.4.2
PPP BSD Compression module registered
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
NET: Registered protocol family 24
usbcore: registered new interface driver usbmouse
drivers/hid/usbhid/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usbcore: registered new interface driver usbkbd
drivers/hid/usbhid/usbkbd.c: :USB HID Boot Protocol keyboard driver
QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
KQEMU installed, max_locked_mem=258312kB.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
fuse init (API version 7.8)
usb-storage: device scan complete
scsi 3:0:0:0: Direct-Access Brother DCP-115C 1.00 PQ: 0 ANSI: 2
sd 3:0:0:0: [sda] Attached SCSI removable disk
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
device eth0 entered promiscuous mode
audit(1185805388.928:2): dev=eth0 prom=256 old_prom=0 auid=4294967295
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 18:21:22 PDT 2007
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
** Loaded modules:
Module Size Used by
nvidia 7249460 0
rfcomm 36824 0
l2cap 23232 5 rfcomm
bluetooth 50148 4 rfcomm,l2cap
nfsd 204912 13
exportfs 5952 1 nfsd
lockd 61320 2 nfsd
nfs_acl 3840 1 nfsd
sunrpc 158972 9 nfsd,lockd,nfs_acl
ppdev 8964 0
lp 11300 0
thermal 13768 0
fan 5124 0
button 8208 0
ac 5508 0
battery 10308 0
autofs4 20804 0
processor 31368 1 thermal
cpufreq_userspace 4448 0
cpufreq_stats 5440 0
cpufreq_powersave 2112 0
cpufreq_ondemand 8204 0
freq_table 4832 2 cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 7176 0
ipv6 239460 25
sd_mod 27584 0
ext2 60936 1
fuse 42388 1
dm_snapshot 16868 0
dm_mirror 21312 0
dm_mod 52480 2 dm_snapshot,dm_mirror
kqemu 123300 0
msp3400 29152 0
usbkbd 6912 0
usbmouse 5632 0
usbnet 18056 0
pppoe 13888 0
pppox 4168 1 pppoe
e100 34444 0
bsd_comp 5824 0
ppp_generic 26580 3 pppoe,pppox,bsd_comp
slhc 6464 1 ppp_generic
joydev 9920 0
usb_storage 77440 0
usblp 13632 0
usbhid 26144 0
hid 25792 1 usbhid
bt878 10808 0
snd_via82xx 27224 0
gameport 15304 1 snd_via82xx
snd_ac97_codec 93220 1 snd_via82xx
tuner 58024 0
tvaudio 22620 0
ac97_bus 2560 1 snd_ac97_codec
snd_pcm_oss 39904 0
snd_mixer_oss 15872 1 snd_pcm_oss
snd_pcm 72772 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 9800 2 snd_via82xx,snd_pcm
snd_mpu401_uart 8384 1 snd_via82xx
snd_seq_dummy 4036 0
snd_seq_oss 29760 0
bttv 166708 1 bt878
video_buf 23876 1 bttv
firmware_class 9984 1 bttv
i2c_viapro 8788 0
snd_seq_midi 8480 0
snd_seq_midi_event 7360 2 snd_seq_oss,snd_seq_midi
snd_seq 46864 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 21380 2 snd_pcm,snd_seq
ir_common 34500 1 bttv
via_ircc 24788 0
snd_rawmidi 23264 2 snd_mpu401_uart,snd_seq_midi
snd_seq_device 8012 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
compat_ioctl32 1664 1 bttv
i2c_algo_bit 6212 1 bttv
ide_cd 36896 0
cdrom 33184 1 ide_cd
pcspkr 3392 0
psmouse 36432 0
irda 173180 1 via_ircc
snd 48804 11 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_seq,snd_timer,snd_rawmidi,snd_seq_device
rtc 13144 0
btcx_risc 5064 1 bttv
parport_pc 34212 1
parport 34312 3 ppdev,lp,parport_pc
floppy 55332 0
serio_raw 7044 0
crc_ccitt 2432 1 irda
soundcore 7840 1 snd
ehci_hcd 31116 0
uhci_hcd 23376 0
b44 25868 0
tveeprom 15248 1 bttv
i2c_core 24000 8 nvidia,msp3400,tuner,tvaudio,bttv,i2c_viapro,i2c_algo_bit,tveeprom
via_agp 10304 1
firewire_ohci 16896 0
firewire_core 39424 1 firewire_ohci
usbcore 125704 9 usbkbd,usbmouse,usbnet,usb_storage,usblp,usbhid,ehci_hcd,uhci_hcd
sata_promise 12676 0
videodev 26944 1 bttv
v4l2_common 16960 5 msp3400,tuner,tvaudio,bttv,videodev
v4l1_compat 12868 2 bttv,videodev
mii 5696 3 usbnet,e100,b44
agpgart 32264 2 nvidia,via_agp
crc_itu_t 2432 1 firewire_core
shpchp 31380 0
pci_hotplug 29568 1 shpchp
ext3 122632 1
jbd 55784 1 ext3
mbcache 8580 2 ext2,ext3
ide_disk 16832 4
ata_generic 7876 0
libata 116848 2 sata_promise,ata_generic
scsi_mod 137356 3 sd_mod,usb_storage,libata
generic 5124 0 [permanent]
via82cxxx 8964 0 [permanent]
ide_core 114436 5 usb_storage,ide_cd,ide_disk,generic,via82cxxx
evdev 9664 3
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge [1106:3189]
Subsystem: ASUSTeK Computer Inc. A7V8X motherboard [1043:807f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8235 PCI Bridge [1106:b168] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dd000000-de7fffff
Prefetchable memory behind bridge: dff00000-efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev 46) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dc800000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at d800 [size=128]
Capabilities: <access denied>
00:08.0 RAID bus controller [0104]: Promise Technology, Inc. PDC20376 (FastTrak 376) [105a:3376] (rev 02)
Subsystem: ASUSTeK Computer Inc. A7V8X motherboard [1043:809e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 4500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at d400 [size=64]
Region 1: I/O ports at d000 [size=16]
Region 2: I/O ports at b800 [size=128]
Region 3: Memory at dc000000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at db800000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
00:09.0 Ethernet controller [0200]: Broadcom Corporation BCM4401 100Base-T [14e4:4401] (rev 01)
Subsystem: ASUSTeK Computer Inc. A7V8X motherboard [1043:80a8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 17
Region 0: Memory at db000000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at dfef0000 [disabled] [size=16K]
Capabilities: <access denied>
00:0d.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at df000000 (32-bit, prefetchable) [size=4K]
00:0d.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 19
Region 0: Memory at de800000 (32-bit, prefetchable) [size=4K]
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller [1043:808c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 4: I/O ports at b400 [size=32]
Capabilities: <access denied>
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller [1043:808c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at b000 [size=32]
Capabilities: <access denied>
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller [1043:808c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at a800 [size=32]
Capabilities: <access denied>
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 82) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7V8X motherboard [1043:808c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 18
Region 0: Memory at da800000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177]
Subsystem: ASUSTeK Computer Inc. A7V8X motherboard [1043:808c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. A7V8X / A7V333 motherboard [1043:808c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 255
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at a400 [size=16]
Capabilities: <access denied>
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50)
Subsystem: ASUSTeK Computer Inc. A7V8X Motherboard (Realtek ALC650 codec) [1043:8095]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at e000 [size=256]
Capabilities: <access denied>
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV36.1 [GeForce FX 5700 Ultra] [10de:0341] (rev a1) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Expansion ROM at dffe0000 [disabled] [size=128K]
Capabilities: <access denied>
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.22-1-k7 (SMP w/1 CPU core)
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.22-1-k7 depends on:
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
ii yaird [linux-initramfs-tool] 0.0.12-20 Yet Another mkInitRD
Versions of packages linux-image-2.6.22-1-k7 recommends:
ii libc6-i686 2.6-5 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.22-1-k7/postinst/depmod-error-initrd-2.6.22-1-k7: false
linux-image-2.6.22-1-k7/postinst/create-kimage-link-2.6.22-1-k7: true
* linux-image-2.6.22-1-k7/preinst/already-running-this-2.6.22-1-k7:
linux-image-2.6.22-1-k7/preinst/initrd-2.6.22-1-k7:
linux-image-2.6.22-1-k7/postinst/bootloader-test-error-2.6.22-1-k7:
linux-image-2.6.22-1-k7/postinst/depmod-error-2.6.22-1-k7: false
linux-image-2.6.22-1-k7/preinst/overwriting-modules-2.6.22-1-k7: true
linux-image-2.6.22-1-k7/preinst/bootloader-initrd-2.6.22-1-k7: true
linux-image-2.6.22-1-k7/postinst/old-initrd-link-2.6.22-1-k7: true
linux-image-2.6.22-1-k7/prerm/removing-running-kernel-2.6.22-1-k7: true
linux-image-2.6.22-1-k7/postinst/old-dir-initrd-link-2.6.22-1-k7: true
linux-image-2.6.22-1-k7/preinst/elilo-initrd-2.6.22-1-k7: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.22-1-k7/preinst/abort-install-2.6.22-1-k7:
linux-image-2.6.22-1-k7/prerm/would-invalidate-boot-loader-2.6.22-1-k7: true
linux-image-2.6.22-1-k7/postinst/bootloader-error-2.6.22-1-k7:
linux-image-2.6.22-1-k7/preinst/failed-to-move-modules-2.6.22-1-k7:
linux-image-2.6.22-1-k7/preinst/abort-overwrite-2.6.22-1-k7:
linux-image-2.6.22-1-k7/preinst/lilo-has-ramdisk:
linux-image-2.6.22-1-k7/preinst/lilo-initrd-2.6.22-1-k7: true
linux-image-2.6.22-1-k7/postinst/old-system-map-link-2.6.22-1-k7: true
linux-image-2.6.22-1-k7/postinst/kimage-is-a-directory:
Dear maintainers,
the latest package of the linux-image cannot be installed, as it breaks during install.
The main reason for this, is that the ramdisk )initrd.img-xxx) cannot be built during
installation. And this cannot be built, because of an error in the /proc-system.
So, please take a look at the log. I set this to "important", as of this bug the
nvidia-kernel and nvidia-glx modules are no more usable, which inhibits rendering
and acceleration for all users. So, please take a look to the stdout:
----------- snip ---------
protheus1:~# LANG=C apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages have been kept back:
libquicktime0
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
2 not fully installed or removed.
Need to get 0B of archives.
After unpacking 0B of additional disk space will be used.
Do you want to continue [Y/n]?
Setting up linux-image-2.6.22-1-k7 (2.6.22-3) ...
Running depmod.
Finding valid ramdisk creators.
Using mkinitrd.yaird to build the ramdisk.
yaird error: unrecognised line in /proc/bus/input/devices: U: Uniq= (fatal)
mkinitrd.yaird failed to create initrd image.
Failed to create initrd image.
dpkg: error processing linux-image-2.6.22-1-k7 (--configure):
subprocess post-installation script returned error exit status 9
dpkg: dependency problems prevent configuration of kqemu-modules-2.6.22-1-k7:
kqemu-modules-2.6.22-1-k7 depends on linux-modules-2.6.22-1-k7 | linux-image-2.6.22-1-k7; however:
Package linux-modules-2.6.22-1-k7 is not installed.
Package linux-image-2.6.22-1-k7 which provides linux-modules-2.6.22-1-k7 is not configured yet.
Package linux-image-2.6.22-1-k7 is not configured yet.
dpkg: error processing kqemu-modules-2.6.22-1-k7 (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
linux-image-2.6.22-1-k7
kqemu-modules-2.6.22-1-k7
E: Sub-process /usr/bin/dpkg returned an error code (1)
protheus1:~#
----------- snap -----------
Thank you very much for youre help !
Best regards
Hans-J. Ullrich
Reply to: