[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#410947: marked as done (Problem report: package linux-source)



Your message dated Thu, 15 Feb 2007 00:53:45 +0100
with message-id <200702150054.11589.elendil@planet.nl>
and subject line Bug#410947: Problem report: package linux-source
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---
Package: linux-source

Boot method: businesscard image
Image version: Etch daily snapshot
Date: 12.02.2007, 22:00

Machine: Fujitsu-Siemens Scaleo Pa 1519
Processor: AMD Athlon 64 X2 4200+
Memory: 1024MB DDR2 533
Partitions: / on /dev/sdb1, swap on /dev/sdb5

Output of lspci -nn and lspci -vnn:

~# lspci -nn
00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 10)
00:02.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI-X Root Port [1002:5a34]
00:12.0 IDE interface [0101]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380]
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387]
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388]
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389]
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a]
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b]
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386]
00:14.0 SMBus [0c05]: ATI Technologies Inc SB600 SMBus [1002:4385] (rev 13)
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c]
00:14.2 Audio device [0403]: ATI Technologies Inc SB600 Azalia [1002:4383]
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SB600 PCI to PCI Bridge [1002:4384]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00: 18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7600 GT] [10de:0391] (rev a1)
02: 03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
02:09.0 Multimedia controller [0480]: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)

~# lspci -vnn
00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 10)
Subsystem: ATI Technologies Inc RS480 Host Bridge [1002:5950]
Flags: bus master, 66MHz, medium devsel, latency 64

00:02.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI-X Root Port [1002:5a34] (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fa000000-fcffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef]
Capabilities: [b8] HyperTransport: MSI Mapping
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel

00:12.0 IDE interface [0101]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 209
I/O ports at ff00 [size=8]
I/O ports at fe00 [size=4]
I/O ports at fd00 [size=8]
I/O ports at fc00 [size=4]
I/O ports at fb00 [size=16]
Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Capabilities: [70] #12 [0010]

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185
Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]

00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 193
Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]

00: 13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 201
Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]

00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 193
Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]

00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 201
Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]

00: 13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 217
Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port

00:14.0 SMBus [0c05]: ATI Technologies Inc SB600 SMBus [1002:4385] (rev 13)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef]
Flags: 66MHz, medium devsel
I/O ports at 0b00 [size=16]
Memory at fe028000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping

00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 82 [Master PriP])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at f900 [size=16]
Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-

00:14.2 Audio device [0403]: ATI Technologies Inc SB600 Azalia [1002:4383]
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:821d]
Flags: bus master, slow devsel, latency 64, IRQ 185
Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81ef]
Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SB600 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: fde00000-fdefffff

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Flags: fast devsel

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Flags: fast devsel

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Flags: fast devsel
Capabilities: [f0] #0f [0010]

01:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7600 GT] [10de:0391] (rev a1) (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81f7]
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
I/O ports at ef00 [size=128]
Expansion ROM at fcfe0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [78] Express Endpoint IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting

02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard [1043:8109]
Flags: bus master, medium devsel, latency 64, IRQ 225
I/O ports at de00 [size=256]
Memory at fdfff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2

02:09.0 Multimedia controller [0480]: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
Subsystem: Pinnacle Systems Inc. Unknown device [11bd:002f]
Flags: bus master, medium devsel, latency 64, IRQ 225
Memory at fdffe000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2

Comments/Problems:

I used installation report template. Sorry if this is wrong.

The problem is that when I compiled and installed the kernel source by following commands:

apt-get install linux-source
cd /usr/src/
tar xjf linux-source-2.6.18.tar.bz2
cd linux-source-2.6.18/
cp /boot/config-2.6.18-3-amd64 .config
make-kpkg --arch amd64 --revision 4 clean
make-kpkg --arch amd64 --revision 4 kernel_image
cd ..
dpkg -i linux-image-2.6.18_4_amd64.deb

Then I booted with the new kernel and got kernel panic: "cannot mount sdb1" or "unknown block(0,0,0)" or something... System stops.
That's it.

--- End Message ---
--- Begin Message ---
On Wednesday 14 February 2007 21:55, Oleksandr Shevchenko wrote:
> Comments/Problems:
> I used installation report template. Sorry if this is wrong.

Using 'reportbug' for issues that are not related to installing is better.

> make-kpkg --arch amd64 --revision 4 clean
> make-kpkg --arch amd64 --revision 4 kernel_image
> cd ..
> dpkg -i linux-image-2.6.18_4_amd64.deb
>
> Then I booted with the new kernel and got kernel panic: "cannot mount
> sdb1" or "unknown block(0,0,0)" or something... System stops.

The Debian kernel configs require an initrd for booting and you did not 
tell make-kpkg that. Check the --initrd option of make-kpkg and the 
manpages for /etc/kernel-*.conf.

Closing this report as this is user error.

Cheers,
FJP

Attachment: pgpJgvWKA56Tn.pgp
Description: PGP signature


--- End Message ---

Reply to: