Bug#457967: linux-image-2.6.23-1-amd64: kernel Oops, (segfault) when downloading from net
Package: linux-image-2.6.23-1-amd64
Version: 2.6.23-2
Severity: normal
When downloading (50MB+) from the debian mirror using apt-get (sky2
kernel driver for the net), the kernel hangs (happened to me twice in
the same situation).
Please ask for more information if needed.
Ondrej
The relevant log:
Dec 27 16:12:26 august kernel: XFS mounting filesystem sda1
Dec 27 16:12:26 august kernel: Ending clean XFS mount for filesystem:
sda1
Dec 27 16:15:44 august kernel: sky2 0000:03:00.0: error interrupt
status=0x80000000
Dec 27 16:15:44 august kernel: sky2 0000:03:00.0: PCI hardware error
(0x2010)
Dec 27 16:16:11 august kernel: Unable to handle kernel NULL pointer
dereference at 0000000000000790 RIP:
Dec 27 16:16:11 august kernel: [<ffffffff80246b2f>]
bit_waitqueue+0x74/0x8c
Dec 27 16:16:11 august kernel: PGD 1176c0067 PUD 115ddf067 PMD 0
Dec 27 16:16:11 august kernel: Oops: 0000 [1] SMP
Dec 27 16:16:11 august kernel: CPU 2
Dec 27 16:16:11 august kernel: Modules linked in: xfs ipv6 ppdev lp
dm_snapshot dm_mirror dm_mod snd_hda_intel snd_pcm_oss snd_pcm
snd_mixer_oss snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq
snd_timer snd_seq_device snd soundcore parport_pc serio_raw
snd_page_alloc sky2 i2c_i801 parport psmouse i2c_core iTCO_wdt button
intel_agp pcspkr tsdev evdev ext3 jbd mbcache sd_mod ide_cd cdrom
ata_piix ata_generic ahci firewire_ohci libata firewire_core crc_itu_t
scsi_mod floppy ehci_hcd generic jmicron ide_core uhci_hcd thermal
processor fan
Dec 27 16:16:11 august kernel: Pid: 262, comm: pdflush Not tainted
2.6.23-1-amd64 #1
Dec 27 16:16:11 august kernel: RIP: 0010:[<ffffffff80246b2f>]
[<ffffffff80246b2f>] bit_waitqueue+0x74/0x8c
Dec 27 16:16:11 august kernel: RSP: 0018:ffff810119411d50 EFLAGS:
00010286
Dec 27 16:16:11 august kernel: RAX: e97166d67e4fce03 RBX:
ffff810116d96f38 RCX: 0000000000000040
Dec 27 16:16:11 august kernel: RDX: 0000000000000400 RSI:
0000000000000003 RDI: 0000000000116d96
Dec 27 16:16:11 august kernel: RBP: 0000000000000003 R08:
0000000000000000 R09: ffffffff8812e46c
Dec 27 16:16:11 august kernel: R10: ffff81011e98a4e8 R11:
0000000000000001 R12: ffff810116d96f38
Dec 27 16:16:11 august kernel: R13: ffff810119103800 R14:
ffff810116d96e40 R15: 0000000000000000
Dec 27 16:16:11 august kernel: FS: 0000000000000000(0000)
GS:ffff81011b9763c0(0000) knlGS:0000000000000000
Dec 27 16:16:11 august kernel: CS: 0010 DS: 0018 ES: 0018 CR0:
000000008005003b
Dec 27 16:16:11 august kernel: CR2: 0000000000000790 CR3:
0000000112d45000 CR4: 00000000000006e0
Dec 27 16:16:11 august kernel: DR0: 0000000000000000 DR1:
0000000000000000 DR2: 0000000000000000
Dec 27 16:16:11 august kernel: DR3: 0000000000000000 DR6:
00000000ffff0ff0 DR7: 0000000000000400
Dec 27 16:16:11 august kernel: Process pdflush (pid: 262, threadinfo
ffff810119410000, task ffff81011b4a9790)
Dec 27 16:16:11 august kernel: Stack: 0000000000000286 0000000000000003
0000000000000000 ffffffff80246b85
Dec 27 16:16:11 august kernel: 0000000000000000 ffff810116d96d30
0000000000000000 ffffffff802a4264
Dec 27 16:16:11 august kernel: 0000000000000000 ffff810119411e80
0000000000000000 0000000000000800
Dec 27 16:16:11 august kernel: Call Trace:
Dec 27 16:16:11 august kernel: [<ffffffff80246b85>]
wake_up_bit+0x11/0x22
Dec 27 16:16:11 august kernel: [<ffffffff802a4264>]
__writeback_single_inode+0x395/0x3a7
Dec 27 16:16:11 august kernel: [<ffffffff802a45cc>]
sync_sb_inodes+0x1cb/0x2af
Dec 27 16:16:11 august kernel: [<ffffffff802a4a33>]
writeback_inodes+0x7d/0xd3
Dec 27 16:16:11 august kernel: [<ffffffff8026a0e4>]
wb_kupdate+0x9c/0x10b
Dec 27 16:16:11 august kernel: [<ffffffff8026a3ee>] pdflush+0x0/0x204
Dec 27 16:16:11 august kernel: [<ffffffff8026a548>] pdflush+0x15a/0x204
Dec 27 16:16:11 august kernel: [<ffffffff8026a048>]
wb_kupdate+0x0/0x10b
Dec 27 16:16:11 august kernel: [<ffffffff80246a79>] kthread+0x47/0x76
Dec 27 16:16:11 august kernel: [<ffffffff8020cc08>] child_rip+0xa/0x12
Dec 27 16:16:11 august kernel: [<ffffffff80246a32>] kthread+0x0/0x76
Dec 27 16:16:11 august kernel: [<ffffffff8020cbfe>] child_rip+0x0/0x12
Dec 27 16:16:11 august kernel:
Dec 27 16:16:11 august kernel:
Dec 27 16:16:11 august kernel: Code: 2b 8a 90 03 00 00 48 d3 e8 48 6b c0
18 48 03 82 80 03 00 00
Dec 27 16:16:11 august kernel: RIP [<ffffffff80246b2f>]
bit_waitqueue+0x74/0x8c
Dec 27 16:16:11 august kernel: RSP <ffff810119411d50>
Dec 27 16:16:11 august kernel: CR2: 0000000000000790
-- Package-specific info:
** Version:
Linux version 2.6.23-1-amd64 (Debian 2.6.23-2) (maks@debian.org) (gcc
version 4.1.3 20071209 (prerelease) (Debian 4.1.2-18)) #1 SMP Fri Dec
21 12:00:17 UTC 2007
** cmdline:
root=/dev/sda5 ro
** Not tainted
** Kernel log:
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ahci 0000:04:00.0: version 2.3
ACPI: PCI Interrupt 0000:04:00.0[A] -> <6>ACPI: PCI Interrupt
0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa204000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
firewire_core: created new fw device fw0 (0 config rom retries, S400)
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:04:00.0 to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 cmd 0xffffc20000634100 ctl 0x0000000000000000
bmdma 0x0000000000000000 irq 17
ata2: SATA max UDMA/133 cmd 0xffffc20000634180 ctl 0x0000000000000000
bmdma 0x0000000000000000 irq 17
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6
bmdma 0x000000000001f000 irq 14
ata4: SATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376
bmdma 0x000000000001f008 irq 15
hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
ata3.00: Host Protected Area detected:
current size: 625140335 sectors
native size: 625142448 sectors
ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata3.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: Host Protected Area detected:
current size: 625140335 sectors
native size: 625142448 sectors
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0x000000000001d800 ctl 0x000000000001dc02
bmdma 0x000000000001e800 irq 19
ata6: SATA max UDMA/133 cmd 0x000000000001e000 ctl 0x000000000001e402
bmdma 0x000000000001e808 irq 19
sd 2:0:0:0: [sda] 625140335 512-byte hardware sectors (320072 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 2:0:0:0: [sda] 625140335 512-byte hardware sectors (320072 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input2
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
sky2 0000:03:00.0: v1.18 addr 0xf9000000 irq 16 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:16:e6:d9:fe:ec
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
input: ImPS/2 Generic Wheel Mouse as /class/input/input5
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:08' and the driver 'parport_pc'
parport_pc 00:08: reported by Plug and Play ACPI
iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k
EXT3 FS on sda5, internal journal
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
sky2 eth0: enabling interface
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
ipv6 303336 16
ppdev 13832 0
lp 17480 0
dm_snapshot 21960 0
dm_mirror 27008 0
dm_mod 64368 2 dm_snapshot,dm_mirror
snd_hda_intel 339364 0
snd_pcm_oss 48288 0
snd_pcm 89864 2 snd_hda_intel,snd_pcm_oss
snd_mixer_oss 21376 1 snd_pcm_oss
snd_seq_dummy 8452 0
snd_seq_oss 36736 0
snd_seq_midi 13376 0
snd_rawmidi 30624 1 snd_seq_midi
snd_seq_midi_event 12416 2 snd_seq_oss,snd_seq_midi
snd_seq 58752 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 28552 2 snd_pcm,snd_seq
snd_seq_device 12948 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 65640 9
snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
serio_raw 11908 0
soundcore 13216 1 snd
i2c_i801 13980 0
snd_page_alloc 15248 2 snd_hda_intel,snd_pcm
parport_pc 42664 1
iTCO_wdt 17232 0
psmouse 45596 0
intel_agp 32160 0
i2c_core 30976 1 i2c_i801
parport 44428 3 ppdev,lp,parport_pc
sky2 52996 0
button 13856 0
pcspkr 7808 0
tsdev 13440 0
evdev 15360 3
ext3 137488 1
jbd 68080 1 ext3
mbcache 13952 1 ext3
sd_mod 33408 3
ide_cd 44704 0
cdrom 39592 1 ide_cd
ata_piix 23044 2
ata_generic 13188 0
generic 10372 0 [permanent]
floppy 66984 0
firewire_ohci 22912 0
firewire_core 49600 1 firewire_ohci
crc_itu_t 6656 1 firewire_core
ahci 30468 0
jmicron 8576 0 [permanent]
ide_core 149904 3 ide_cd,generic,jmicron
libata 129840 3 ata_piix,ata_generic,ahci
scsi_mod 164664 2 sd_mod,libata
ehci_hcd 38540 0
uhci_hcd 29984 0
thermal 22176 0
processor 43624 1 thermal
fan 10248 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory
Controller Hub [8086:29a0] (rev 02)
Subsystem: Giga-byte Technology Unknown device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express
Root Port [8086:29a1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: f4000000-f7ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c000 [size=32]
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c400 [size=32]
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB2 EHCI #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fa205000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD
Audio Controller [8086:284b] (rev 02)
Subsystem: Giga-byte Technology Unknown device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fa200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00007000-00007fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000fa300000-00000000fa3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 6 [8086:2849] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: fa000000-fa0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at c800 [size=32]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at cc00 [size=32]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB2 EHCI #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fa204000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: fa100000-fa1fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC
Interface Controller [8086:2810] (rev 02)
Subsystem: Giga-byte Technology Unknown device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4
port SATA IDE Controller [8086:2820] (rev 02) (prog-if 8a [Master SecP
PriP])
Subsystem: Giga-byte Technology Unknown device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: I/O ports at fc00 [size=16]
Capabilities: <access denied>
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus
Controller [8086:283e] (rev 02)
Subsystem: Giga-byte Technology Unknown device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fa206000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 2
port SATA IDE Controller [8086:2825] (rev 02) (prog-if 85 [Master SecO
PriO])
Subsystem: Giga-byte Technology Unknown device [1458:b002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at d800 [size=8]
Region 1: I/O ports at dc00 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at e400 [size=4]
Region 4: I/O ports at e800 [size=16]
Region 5: I/O ports at ec00 [size=16]
Capabilities: <access denied>
01:00.0 VGA compatible controller [0300]: nVidia Corporation Unknown
device [10de:0402] (rev a1) (prog-if 00 [VGA])
Subsystem: Giga-byte Technology Unknown device [1458:3452]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 8000 [size=128]
[virtual] Expansion ROM at f7000000 [disabled] [size=128K]
Capabilities: <access denied>
03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
Unknown device [11ab:4364] (rev 12)
Subsystem: Giga-byte Technology Unknown device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 1275
Region 0: Memory at f9000000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 9000 [size=256]
[virtual] Expansion ROM at fa300000 [disabled] [size=128K]
Capabilities: <access denied>
04:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI
1.0])
Subsystem: Giga-byte Technology Unknown device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 5: Memory at fa000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
04:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master
SecO PriO])
Subsystem: Giga-byte Technology Unknown device [1458:b000]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at a400 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at ac00 [size=4]
Region 4: I/O ports at b000 [size=16]
Capabilities: <access denied>
05:06.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Unknown device [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fa104000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fa100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.23-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.23-1-amd64 depends on:
ii e2fsprogs 1.40.3-1 ext2 file system utilities and lib
ii initramfs-tools [linux-initr 0.91d tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
linux-image-2.6.23-1-amd64 recommends no packages.
-- debconf information:
linux-image-2.6.23-1-amd64/postinst/depmod-error-2.6.23-1-amd64: false
linux-image-2.6.23-1-amd64/postinst/bootloader-error-2.6.23-1-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.23-1-amd64/preinst/abort-install-2.6.23-1-amd64:
linux-image-2.6.23-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.23-1-amd64/preinst/abort-overwrite-2.6.23-1-amd64:
linux-image-2.6.23-1-amd64/preinst/initrd-2.6.23-1-amd64:
linux-image-2.6.23-1-amd64/postinst/kimage-is-a-directory:
* linux-image-2.6.23-1-amd64/postinst/create-kimage-link-2.6.23-1-amd64: true
linux-image-2.6.23-1-amd64/postinst/old-system-map-link-2.6.23-1-amd64: true
linux-image-2.6.23-1-amd64/preinst/elilo-initrd-2.6.23-1-amd64: true
linux-image-2.6.23-1-amd64/prerm/removing-running-kernel-2.6.23-1-amd64: true
linux-image-2.6.23-1-amd64/prerm/would-invalidate-boot-loader-2.6.23-1-amd64:
true
* linux-image-2.6.23-1-amd64/preinst/bootloader-initrd-2.6.23-1-amd64: false
linux-image-2.6.23-1-amd64/preinst/already-running-this-2.6.23-1-amd64:
linux-image-2.6.23-1-amd64/preinst/lilo-initrd-2.6.23-1-amd64: true
linux-image-2.6.23-1-amd64/postinst/bootloader-test-error-2.6.23-1-amd64:
linux-image-2.6.23-1-amd64/preinst/failed-to-move-modules-2.6.23-1-amd64:
linux-image-2.6.23-1-amd64/postinst/old-dir-initrd-link-2.6.23-1-amd64: true
linux-image-2.6.23-1-amd64/postinst/depmod-error-initrd-2.6.23-1-amd64: false
linux-image-2.6.23-1-amd64/postinst/old-initrd-link-2.6.23-1-amd64: true
* linux-image-2.6.23-1-amd64/preinst/overwriting-modules-2.6.23-1-amd64: false
Reply to: