Bug#449438: linux-image-2.6.22-2-k7 kernel panic
I am trying to recompile the kernel but am stuck. I am a gentoo user so I
am very familiar compiling kernels. When I do make menuconfig it tells me
that /usr/src/linux-headers-2.6.22-2-k7/scripts/basic/Makefile: No such
file or directory. The make file is in the main directory for the kernel.
As the other information for uname -r I cannot get the correct version
because I'm booted into an earlier version of the kernel. I'm copying the
rest of the information asked for. I have hda instead of sda because of
the kernel I'm using.
linux version 2.6.18-4-k7 (Debian 2.6.18.dfsg.1-12etch2)
(dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian
4.1.1-21)) #1 SMP Wed May 9 23:42:01 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002bef0000 (usable)
BIOS-e820: 000000002bef0000 - 000000002befa000 (ACPI data)
BIOS-e820: 000000002befa000 - 000000002bf00000 (ACPI NVS)
BIOS-e820: 000000002bf00000 - 0000000030000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
702MB LOWMEM available.
found SMP MP-table at 000f7fd0
On node 0 totalpages: 179952
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 175856 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7f60
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x2bef619d
ACPI: FADT (v001 SiS 755F 0x06040000 PTL 0x000f4240) @ 0x2bef9e3e
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x2bef9eb2
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
0x2bef9f88
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x2bef9fd8
ACPI: DSDT (v001 PTLTD 755 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ11 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 30000000:cff00000)
Detected 1800.152 MHz processor.
Built 1 zonelists. Total pages: 179952
Kernel command line: root=/dev/hda5 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 704668k/719808k available (1557k kernel code, 14540k reserved,
581k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay using timer specific routine.. 3602.00 BogoMIPS
(lpj=7204006)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000
00000001 00000000 00000001
CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000
00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
CPU0: AMD Mobile AMD Sempron(tm) Processor 3100+ stepping 02
Total of 1 processors activated (3602.00 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 5404k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=0)
Enabling SiS 96x SMBus.
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:04: ioport range 0x8000-0x807f could not be reserved
pnp: 00:04: ioport range 0x8080-0x80ff has been reserved
pnp: 00:04: ioport range 0x8100-0x811f has been reserved
pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: a000-afff
MEM window: e2100000-e21fffff
PREFETCH window: e8000000-efffffff
PCI: Bus 2, cardbus bridge: 0000:00:06.0
IO window: 00002400-000024ff
IO window: 00002800-000028ff
PREFETCH window: 40000000-41ffffff
MEM window: 42000000-43ffffff
PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 169
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x38 set to 0x1
audit: initializing netlink socket (disabled)
audit(1194270944.860:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177
ACPI: PCI interrupt for device 0000:00:02.6 disabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [THRM] (62 C)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 185
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 185, io mem 0xe2002000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
sis900.c: v1.08.10 Apr. 2 2006
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 193
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 193, io mem 0xe2003000
Time: acpi_pm clocksource has been installed.
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 201
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
usb 1-2: new full speed USB device using ohci_hcd and address 2
hda: HTS424040M9AT00, ATA DISK drive
usb 1-2: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Logitech USB Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:03.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PHILIPS CD-RW/DVD-ROM SCB5265, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 209
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:03.2
ehci_hcd 0000:00:03.2: irq 209, io mem 0xe2004000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 169
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
0000:00:04.0: Using transceiver found at address 13 as default
eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 169, 00:16:36:15:f1:0e.
hda: max request size: 512KiB
hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63,
UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usb 2-2: USB disconnect, address 2
usb 2-2: new low speed USB device using ohci_hcd and address 3
Attempting manual resume
usb 2-2: configuration #1 chosen from 1 choice
input: Logitech USB Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:03.1-2
usb 1-2: USB disconnect, address 2
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
usb 1-2: new full speed USB device using ohci_hcd and address 3
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
usb 1-2: configuration #1 chosen from 1 choice
ts: Compaq touchscreen protocol output
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 32M @ 0xe0000000
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0
alt 0 proto 2 vid 0x03F0 pid 0x7304
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
input: PC Speaker as /class/input/input3
ndiswrapper version 1.47 loaded (smp=yes)
Yenta: ISA IRQ mask 0x06f8, PCI irq 169
Socket status: 30000007
Real Time Clock Driver v1.12ac
ndiswrapper: driver bcmwl5 (Broadcom,12/22/2004, 3.100.46.0) loaded
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 217
ndiswrapper: using IRQ 217
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps:
0xa04713/0x204000
input: SynPS/2 Synaptics TouchPad as /class/input/input4
wlan0: ethernet device 00:16:ce:13:e2:08 using NDIS driver: bcmwl5,
version: 0x3642e00, NDIS version: 0x501, vendor: '', 14E4:4318.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK;
AES/CCMP with WPA, WPA2, WPA2PSK
usbcore: registered new driver ndiswrapper
PCI: Enabling device 0000:00:02.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 177
ndiswrapper: changing interface name from 'wlan0' to 'eth1'
udev: renamed network interface wlan0 to eth1
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
intel8x0_measure_ac97_clock: measured 55462 usecs
intel8x0: clocking to 48000
Adding 1068280k swap on /dev/hda6. Priority:-1 extents:1 across:1068280k
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel@redhat.com
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
ReiserFS: hda8: found reiserfs format "3.6" with standard journal
ReiserFS: hda8: using ordered data mode
ReiserFS: hda8: journal params: device hda8, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
ReiserFS: hda8: checking transaction log (hda8)
ReiserFS: hda8: Using r5 hash to sort names
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect
breakage unless you upgrade to new tools.
pcmcia: see
http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for
details.
eth0: Media Link On 100mbps full-duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3100+ processors
(version 2.00.00)
powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc
powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x13
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
eth0: no IPv6 routers present
eth1: no IPv6 routers present
Blinux version 2.6.18-4-k7 (Debian 2.6.18.dfsg.1-12etch2)
(dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian
4.1.1-21)) #1 SMP Wed May 9 23:42:01 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002bef0000 (usable)
BIOS-e820: 000000002bef0000 - 000000002befa000 (ACPI data)
BIOS-e820: 000000002befa000 - 000000002bf00000 (ACPI NVS)
BIOS-e820: 000000002bf00000 - 0000000030000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
702MB LOWMEM available.
found SMP MP-table at 000f7fd0
On node 0 totalpages: 179952
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 175856 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7f60
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x2bef619d
ACPI: FADT (v001 SiS 755F 0x06040000 PTL 0x000f4240) @ 0x2bef9e3e
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x2bef9eb2
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
0x2bef9f88
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x2bef9fd8
ACPI: DSDT (v001 PTLTD 755 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ11 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 30000000:cff00000)
Detected 1800.152 MHz processor.
Built 1 zonelists. Total pages: 179952
Kernel command line: root=/dev/hda5 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 704668k/719808k available (1557k kernel code, 14540k reserved,
581k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay using timer specific routine.. 3602.00 BogoMIPS
(lpj=7204006)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000
00000001 00000000 00000001
CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000
00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
CPU0: AMD Mobile AMD Sempron(tm) Processor 3100+ stepping 02
Total of 1 processors activated (3602.00 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 5404k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=0)
Enabling SiS 96x SMBus.
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:04: ioport range 0x8000-0x807f could not be reserved
pnp: 00:04: ioport range 0x8080-0x80ff has been reserved
pnp: 00:04: ioport range 0x8100-0x811f has been reserved
pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: a000-afff
MEM window: e2100000-e21fffff
PREFETCH window: e8000000-efffffff
PCI: Bus 2, cardbus bridge: 0000:00:06.0
IO window: 00002400-000024ff
IO window: 00002800-000028ff
PREFETCH window: 40000000-41ffffff
MEM window: 42000000-43ffffff
PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 169
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x38 set to 0x1
audit: initializing netlink socket (disabled)
audit(1194270944.860:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177
ACPI: PCI interrupt for device 0000:00:02.6 disabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [THRM] (62 C)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 185
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 185, io mem 0xe2002000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
sis900.c: v1.08.10 Apr. 2 2006
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 193
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 193, io mem 0xe2003000
Time: acpi_pm clocksource has been installed.
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 201
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
usb 1-2: new full speed USB device using ohci_hcd and address 2
hda: HTS424040M9AT00, ATA DISK drive
usb 1-2: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Logitech USB Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:03.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PHILIPS CD-RW/DVD-ROM SCB5265, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 209
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:03.2
ehci_hcd 0000:00:03.2: irq 209, io mem 0xe2004000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 169
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
0000:00:04.0: Using transceiver found at address 13 as default
eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 169, 00:16:36:15:f1:0e.
hda: max request size: 512KiB
hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63,
UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usb 2-2: USB disconnect, address 2
usb 2-2: new low speed USB device using ohci_hcd and address 3
Attempting manual resume
usb 2-2: configuration #1 chosen from 1 choice
input: Logitech USB Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:03.1-2
usb 1-2: USB disconnect, address 2
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
usb 1-2: new full speed USB device using ohci_hcd and address 3
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
usb 1-2: configuration #1 chosen from 1 choice
ts: Compaq touchscreen protocol output
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 32M @ 0xe0000000
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0
alt 0 proto 2 vid 0x03F0 pid 0x7304
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
input: PC Speaker as /class/input/input3
ndiswrapper version 1.47 loaded (smp=yes)
Yenta: ISA IRQ mask 0x06f8, PCI irq 169
Socket status: 30000007
Real Time Clock Driver v1.12ac
ndiswrapper: driver bcmwl5 (Broadcom,12/22/2004, 3.100.46.0) loaded
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 217
ndiswrapper: using IRQ 217
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps:
0xa04713/0x204000
input: SynPS/2 Synaptics TouchPad as /class/input/input4
wlan0: ethernet device 00:16:ce:13:e2:08 using NDIS driver: bcmwl5,
version: 0x3642e00, NDIS version: 0x501, vendor: '', 14E4:4318.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK;
AES/CCMP with WPA, WPA2, WPA2PSK
usbcore: registered new driver ndiswrapper
PCI: Enabling device 0000:00:02.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 177
ndiswrapper: changing interface name from 'wlan0' to 'eth1'
udev: renamed network interface wlan0 to eth1
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
intel8x0_measure_ac97_clock: measured 55462 usecs
intel8x0: clocking to 48000
Adding 1068280k swap on /dev/hda6. Priority:-1 extents:1 across:1068280k
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel@redhat.com
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
ReiserFS: hda8: found reiserfs format "3.6" with standard journal
ReiserFS: hda8: using ordered data mode
ReiserFS: hda8: journal params: device hda8, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
ReiserFS: hda8: checking transaction log (hda8)
ReiserFS: hda8: Using r5 hash to sort names
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect
breakage unless you upgrade to new tools.
pcmcia: see
http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for
details.
eth0: Media Link On 100mbps full-duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3100+ processors
(version 2.00.00)
powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc
powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x13
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
eth0: no IPv6 routers present
eth1: no IPv6 routers present
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8uetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
debian:/usr/src/linux-headers-2.6.22-2-k7# lspci -nn
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 760/M760 Host
[1039:0760] (rev 03)
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SG86C202
[1039:0002]
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS963 [MuTIOL
Media IO] [1039:0963] (rev 25)
00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus
Controller [1039:0016]
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE]
[1039:5513]
00:02.6 Modem [0703]: Silicon Integrated Systems [SiS] AC'97 Modem
Controller [1039:7013] (rev a0)
00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems
[SiS] AC'97 Sound Controller [1039:7012] (rev a0)
00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.0
Controller [1039:7001] (rev 0f)
00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.0
Controller [1039:7001] (rev 0f)
00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0
Controller [1039:7002]
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS]
SiS900 PCI Fast Ethernet [1039:0900] (rev 91)
00:06.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus
Controller [104c:ac56]
00:0b.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce
One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS]
661/741/760/761 PCI/AGP VGA Display Adapter [1039:6330]
debian:/usr/src/linux-headers-2.6.22-2-k7# lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev
03)
Flags: bus master, medium devsel, latency 64
Memory at e0000000 (32-bit, non-prefetchable) [size=32M]
Capabilities: [a0] AGP version 3.0
Capabilities: [d0] HyperTransport: Slave or Primary Interface
Capabilities: [f0] HyperTransport: Interrupt Discovery and
Configuration
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00
[Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e2100000-e21fffff
Prefetchable memory behind bridge: e8000000-efffffff
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media
IO] (rev 25)
Flags: bus master, medium devsel, latency 0
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
Flags: medium devsel
I/O ports at 8100 [size=32]
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
(prog-if 80 [Master])
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Flags: bus master, medium devsel, latency 128, IRQ 201
I/O ports at 2000 [size=16]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller
(rev a0) (prog-if 00 [Generic])
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Flags: bus master, medium devsel, latency 173, IRQ 177
I/O ports at 1000 [size=256]
I/O ports at 1c00 [size=128]
Capabilities: [48] Power Management version 2
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS]
AC'97 Sound Controller (rev a0)
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Flags: bus master, medium devsel, latency 173, IRQ 177
I/O ports at 1400 [size=256]
I/O ports at 1c80 [size=128]
Capabilities: [48] Power Management version 2
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Flags: bus master, medium devsel, latency 64, IRQ 185
Memory at e2002000 (32-bit, non-prefetchable) [size=4K]
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Flags: bus master, medium devsel, latency 64, IRQ 193
Memory at e2003000 (32-bit, non-prefetchable) [size=4K]
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0
Controller (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Flags: bus master, medium devsel, latency 64, IRQ 209
Memory at e2004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI
Fast Ethernet (rev 91)
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Flags: bus master, medium devsel, latency 173, IRQ 169
I/O ports at 1800 [size=256]
Memory at e2005000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 44000000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
00:06.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus
Controller
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Flags: bus master, medium devsel, latency 168, IRQ 169
Memory at 44020000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 40000000-41fff000 (prefetchable)
Memory window 1: 42000000-43fff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
16-bit legacy interface ports at 0001
00:0b.0 Network controller: Broadcom Corporation BCM4318 [AirForce One
54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: AMBIT Microsystem Corp. TravelMate 2410
Flags: bus master, fast devsel, latency 64, IRQ 217
Memory at e2000000 (32-bit, non-prefetchable) [size=8K]
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Flags: fast devsel
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
661/741/760/761 PCI/AGP VGA Display Adapter (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Flags: 66MHz, medium devsel, IRQ 7
BIST result: 00
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at e2100000 (32-bit, non-prefetchable) [size=128K]
I/O ports at a000 [size=128]
Capabilities: [40] Power Management version 2
Capabilities: [50] AGP version 3.0
On Mon, 05 Nov 2007 19:35:36 -0600, zhouqiang <qzhou.dl@gmail.com> wrote:
please compile the sda support into the kernel. It should work.
On Mon, 2007-11-05 at 14:16 +0630, Barbara Smith wrote:
debian:/home/mystified# dpkg --status linux-image-2.6.22-2-k7
Package: linux-image-2.6.22-2-k7
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 52584
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: i386
Source: linux-2.6
Version: 2.6.22-4
Provides: linux-image, linux-image-2.6, linux-modules-2.6.22-2-k7
Depends: module-init-tools (>= 0.9.13), initramfs-tools (>= 0.55) |
yaird (>= 0.0.12-8) | linux-initramfs-tool
Recommends: libc6-i686
Suggests: linux-doc-2.6.22, grub (>= 0.97-3) | lilo (>= 19.1)
Conflicts: grub (<= 0.95+cvs20040624-17), initramfs-tools (<< 0.55),
yaird (<< 0.0.12-8)
Description: Linux 2.6.22 image on AMD K7
This package provides the binary image and pre-built loadable modules
for
Linux kernel 2.6.22 on 32bit AMD Duron/Athlon/AthlonXP/Sempron
machines.
When I try to boot into this kernel I get a lot of errors which include:
/device/sys/blocks/sda/sda5/dev no such file or directory
/device/sys/blocks/sda/sda5/dev seems to be down
/bin/mknod missing operand after 'b'
kernel panic not synching
--
Using Opera's revolutionary e-mail client: http://www.opera.com/m2/
Reply to: