[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#351709: marked as done (udev: usb mass-storgae does not work at all)

Your message dated Fri, 2 Nov 2007 09:20:48 +0100
with message-id <20071102082048.GG10570@stro.at>
and subject line Bug#351709: linux-image-2.6.22-2-amd64: USB mass storage device is not mounted automatically
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: udev
Version: 0.084-3
Severity: normal


hi,
i can not say for sure that this is an udev bug, but i am kind of exasperated.

The first time i plug an UMS device into my computer the syslog
following messages:


Feb  6 22:28:24 obi kernel: usb 1-1: new high speed USB device using ehci_hcd and address 6
Feb  6 22:28:31 obi kernel: usb 1-1: unable to read config index 0 descriptor/start
Feb  6 22:28:31 obi kernel: usb 1-1: can't read configurations, error -110
Feb  6 22:28:31 obi kernel: usb 1-1: new high speed USB device using ehci_hcd and address 7
Feb  6 22:28:31 obi kernel: usb-storage: USB Mass Storage device detected
Feb  6 22:28:31 obi kernel: usb-storage: -- associate_dev
Feb  6 22:28:31 obi kernel: usb-storage: Vendor: 0x0781, Product: 0x5150, Revision: 0x0020
Feb  6 22:28:31 obi kernel: usb-storage: Interface Subclass: 0x06, Protocol: 0x50
Feb  6 22:28:31 obi kernel: usb-storage: Transport: Bulk
Feb  6 22:28:31 obi kernel: usb-storage: Protocol: Transparent SCSI
Feb  6 22:28:31 obi kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Feb  6 22:28:31 obi kernel: usb-storage: *** thread sleeping.
Feb  6 22:28:31 obi kernel: usb-storage: device found at 7
Feb  6 22:28:31 obi kernel: usb-storage: waiting for device to settle before scanning
Feb  6 22:28:36 obi kernel: usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Feb  6 22:28:36 obi kernel: usb-storage: GetMaxLUN command result is 1, data is 0
Feb  6 22:28:36 obi kernel: usb-storage: queuecommand called
Feb  6 22:28:36 obi kernel: usb-storage: *** thread awakened.
Feb  6 22:28:36 obi kernel: usb-storage: Command INQUIRY (6 bytes)
Feb  6 22:28:36 obi kernel: usb-storage:  12 00 00 00 24 00
Feb  6 22:28:36 obi kernel: usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
Feb  6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb  6 22:28:36 obi kernel: usb-storage: Status code 0; transferred 31/31
Feb  6 22:28:36 obi kernel: usb-storage: -- transfer complete
Feb  6 22:28:36 obi kernel: usb-storage: Bulk command transfer result=0
Feb  6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
Feb  6 22:28:36 obi kernel: usb-storage: Status code 0; transferred 36/36
Feb  6 22:28:36 obi kernel: usb-storage: -- transfer complete
Feb  6 22:28:36 obi kernel: usb-storage: Bulk data transfer result 0x0
Feb  6 22:28:36 obi kernel: usb-storage: Attempting to get CSW...
Feb  6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb  6 22:28:36 obi kernel: usb-storage: Status code 0; transferred 13/13
Feb  6 22:28:36 obi kernel: usb-storage: -- transfer complete
Feb  6 22:28:36 obi kernel: usb-storage: Bulk status result = 0
Feb  6 22:28:36 obi kernel: usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
Feb  6 22:28:36 obi kernel: usb-storage: scsi cmd done, result=0x0
Feb  6 22:28:36 obi kernel: usb-storage: *** thread sleeping.
Feb  6 22:28:36 obi kernel:   Vendor: SanDisk   Model: Cruzer Mini       Rev: 0.2 
Feb  6 22:28:36 obi kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Feb  6 22:28:36 obi kernel: usb-storage: queuecommand called
Feb  6 22:28:36 obi kernel: usb-storage: *** thread awakened.
Feb  6 22:28:36 obi kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb  6 22:28:36 obi kernel: usb-storage:  00 00 00 00 00 00
Feb  6 22:28:36 obi kernel: usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
Feb  6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb  6 22:28:36 obi kernel: usb-storage: Status code 0; transferred 31/31
Feb  6 22:28:36 obi kernel: usb-storage: -- transfer complete
Feb  6 22:28:36 obi kernel: usb-storage: Bulk command transfer result=0
Feb  6 22:28:36 obi kernel: usb-storage: Attempting to get CSW...
Feb  6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb  6 22:28:39 obi udevd-event[6258]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0/bus' failed
Feb  6 22:28:43 obi udevd-event[6258]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0/ioerr_cnt' failed
Feb  6 22:29:06 obi kernel: usb-storage: command_abort called
Feb  6 22:29:06 obi kernel: usb-storage: usb_stor_stop_transport called
Feb  6 22:29:06 obi kernel: usb-storage: -- cancelling URB
Feb  6 22:29:06 obi kernel: usb-storage: Status code -104; transferred 0/13
Feb  6 22:29:06 obi kernel: usb-storage: -- transfer cancelled
Feb  6 22:29:06 obi kernel: usb-storage: Bulk status result = 4
Feb  6 22:29:06 obi kernel: usb-storage: -- command was aborted
Feb  6 22:29:06 obi kernel: usb 1-1: reset high speed USB device using ehci_hcd and address 7


USB Controller:
0000:00:02.0 USB Controller: nVidia Corporation CK804 USB Controller
(rev a2) (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
        Memory at d5001000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2

0000:00:02.1 USB Controller: nVidia Corporation CK804 USB Controller
(rev a3) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19
        Memory at feb00000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] #0a [2098]
        Capabilities: [80] Power Management version 2



In case the bug does not belong here please forward it to the right
place or give me a hint, whom i could ask to get rid of this nasty bug:)

Your Jan

-- Package-specific info:
-- /etc/udev/rules.d/:
/etc/udev/rules.d/:
total 0
lrwxrwxrwx 1 root root 20 2006-01-17 17:51 020_permissions.rules -> ../permissions.rules
lrwxrwxrwx 1 root root 22 2006-01-17 19:15 025_logitechmouse.rules -> ../logitechmouse.rules
lrwxrwxrwx 1 root root 19 2006-01-17 17:51 cd-aliases.rules -> ../cd-aliases.rules
lrwxrwxrwx 1 root root 13 2006-01-17 17:51 udev.rules -> ../udev.rules
lrwxrwxrwx 1 root root 19 2006-01-17 17:51 z20_persistent.rules -> ../persistent.rules
lrwxrwxrwx 1 root root 12 2006-01-17 17:51 z50_run.rules -> ../run.rules
lrwxrwxrwx 1 root root 16 2006-01-17 17:51 z55_hotplug.rules -> ../hotplug.rules
lrwxrwxrwx 1 root root 19 2006-01-17 19:45 z60_alsa-utils.rules -> ../alsa-utils.rules
lrwxrwxrwx 1 root root 15 2006-01-17 22:24 z60_hdparm.rules -> ../hdparm.rules
lrwxrwxrwx 1 root root 17 2006-01-17 17:51 z70_hotplugd.rules -> ../hotplugd.rules

-- /sys/:
/sys/block/hda/dev
/sys/block/hda/hda1/dev
/sys/block/hdb/dev
/sys/block/hdb/hdb1/dev
/sys/block/hdb/hdb3/dev
/sys/block/hdb/hdb4/dev
/sys/block/hdc/dev
/sys/block/hdd/dev
/sys/block/loop0/dev
/sys/block/loop1/dev
/sys/block/loop2/dev
/sys/block/loop3/dev
/sys/block/loop4/dev
/sys/block/loop5/dev
/sys/block/loop6/dev
/sys/block/loop7/dev
/sys/block/nbd0/dev
/sys/block/nbd1/dev
/sys/block/nbd10/dev
/sys/block/nbd11/dev
/sys/block/nbd12/dev
/sys/block/nbd13/dev
/sys/block/nbd14/dev
/sys/block/nbd15/dev
/sys/block/nbd2/dev
/sys/block/nbd3/dev
/sys/block/nbd4/dev
/sys/block/nbd5/dev
/sys/block/nbd6/dev
/sys/block/nbd7/dev
/sys/block/nbd8/dev
/sys/block/nbd9/dev
/sys/block/ram0/dev
/sys/block/ram1/dev
/sys/block/ram10/dev
/sys/block/ram11/dev
/sys/block/ram12/dev
/sys/block/ram13/dev
/sys/block/ram14/dev
/sys/block/ram15/dev
/sys/block/ram2/dev
/sys/block/ram3/dev
/sys/block/ram4/dev
/sys/block/ram5/dev
/sys/block/ram6/dev
/sys/block/ram7/dev
/sys/block/ram8/dev
/sys/block/ram9/dev
/sys/block/sda/dev
/sys/block/sda/sda1/dev
/sys/block/sda/sda10/dev
/sys/block/sda/sda2/dev
/sys/block/sda/sda3/dev
/sys/block/sda/sda4/dev
/sys/block/sda/sda5/dev
/sys/block/sda/sda6/dev
/sys/block/sda/sda7/dev
/sys/block/sda/sda8/dev
/sys/block/sda/sda9/dev
/sys/block/sdb/dev
/sys/block/sdb/sdb1/dev
/sys/block/sdb/sdb2/dev
/sys/block/sdb/sdb3/dev
/sys/class/cpuid/cpu0/dev
/sys/class/graphics/fb0/dev
/sys/class/graphics/fb1/dev
/sys/class/graphics/fb2/dev
/sys/class/i2c-dev/i2c-0/dev
/sys/class/i2c-dev/i2c-1/dev
/sys/class/input/input0/event0/dev
/sys/class/input/input0/mouse0/dev
/sys/class/input/input1/event1/dev
/sys/class/input/input1/js0/dev
/sys/class/input/input2/event2/dev
/sys/class/input/mice/dev
/sys/class/misc/dac960_gam/dev
/sys/class/misc/device-mapper/dev
/sys/class/misc/mcelog/dev
/sys/class/misc/nvram/dev
/sys/class/misc/pktcdvd/dev
/sys/class/misc/psaux/dev
/sys/class/misc/rtc/dev
/sys/class/misc/tun/dev
/sys/class/msr/msr0/dev
/sys/class/ppdev/parport0/dev
/sys/class/ppp/ppp/dev
/sys/class/printer/lp0/dev
/sys/class/scsi_generic/sg0/dev
/sys/class/scsi_generic/sg1/dev
/sys/class/sound/admmidi/dev
/sys/class/sound/adsp/dev
/sys/class/sound/amidi/dev
/sys/class/sound/audio/dev
/sys/class/sound/controlC0/dev
/sys/class/sound/dmmidi/dev
/sys/class/sound/dsp/dev
/sys/class/sound/hwC0D0/dev
/sys/class/sound/hwC0D2/dev
/sys/class/sound/midi/dev
/sys/class/sound/midiC0D0/dev
/sys/class/sound/midiC0D1/dev
/sys/class/sound/midiC0D2/dev
/sys/class/sound/midiC0D3/dev
/sys/class/sound/mixer/dev
/sys/class/sound/pcmC0D0c/dev
/sys/class/sound/pcmC0D0p/dev
/sys/class/sound/pcmC0D1c/dev
/sys/class/sound/pcmC0D2c/dev
/sys/class/sound/pcmC0D2p/dev
/sys/class/sound/pcmC0D3p/dev
/sys/class/sound/seq/dev
/sys/class/sound/sequencer/dev
/sys/class/sound/sequencer2/dev
/sys/class/sound/timer/dev
/sys/class/usb/lp0/dev
/sys/class/usb_device/usbdev1.1/dev
/sys/class/usb_device/usbdev1.7/dev
/sys/class/usb_device/usbdev2.1/dev
/sys/class/usb_device/usbdev2.2/dev
/sys/class/usb_device/usbdev2.3/dev
/sys/class/usb_device/usbdev2.4/dev
/sys/class/usb_device/usbdev2.5/dev

-- Kernel configuration:
 isapnp_init not present.


-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15.2obi-amd64
Locale: LANG=en_US.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)

Versions of packages udev depends on:
ii  initscripts                  2.86.ds1-11 Scripts for initializing and shutt
ii  libc6                        2.3.5-12.1  GNU C Library: Shared libraries an
ii  libselinux1                  1.28-3      SELinux shared libraries
ii  lsb-base                     3.0-15      Linux Standard Base 3.0 init scrip
ii  makedev                      2.3.1-80    creates device files in /dev
ii  sed                          4.1.4-5     The GNU sed stream editor

udev recommends no packages.

-- no debconf information

--- End Message ---
--- Begin Message --- 
On Tue, 30 Oct 2007, Vivek Ravindranath K wrote:

> I am using a Debian 4.0 Sid.When I try to connect my Playstation portable.
> It is not being mounted but when I open usbview, I see it  listed there. It
> was working before but has sudden;y stopped working. My guess is it started
> after did an upgrade to the new kernel. I had to do a kernel upgrade because
> when I installed the updates, it installed a new version of GCC and I got a
> message that I cannot use my current kernel and use the NVIDIA graphics
> driver. 

sorry we can't support tainted kernels,
as the source of that driver is not known.

closing

-- 
maks

--- End Message ---
Reply to: