Bug#444314: gspca-modules-2.6.21-2-686: gspca bugs with my logitech webcam
Package: gspca-modules-2.6.21-2-686
Version: 2.6.21+01.00.18-4
Severity: normal
I try to install my logitech webcam under debian. So I installed the gspca
module for my kernel, but when I plug the webcam, I must wait a very long time,
as if the module was waiting for something, and the light on the webcam are turn
on.
I tried to launch camorama or ekiga, but they both freeze.
lsusb gives me for the webcam :
Bus 003 Device 002: ID 046d:08da Logitech, Inc.
dmesg gives me :
Linux video capture interface: v2.00
usbcore: registered new interface driver gspca
/usr/src/modules/gspca/gspca_core.c: gspca driver 01.00.18 registered
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
/usr/src/modules/gspca/gspca_core.c: USB GSPCA camera found.(ZC3XX)
/usr/src/modules/gspca/gspca_core.c: [spca5xx_probe:4098] Camera type JPEG
/usr/src/modules/gspca/Vimicro/zc3xx.h: [zc3xx_config:515] Sensor ID:7
/usr/src/modules/gspca/Vimicro/zc3xx.h: [zc3xx_config:597] Find Sensor HV7131R(c)
/usr/src/modules/gspca/gspca_core.c: [spca5xx_getcapability:1215] maxw 640 maxh 480 minw 176 minh 144
uhci_hcd 0000:00:1d.2: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
usbcore: registered new interface driver snd-usb-audio
/usr/src/modules/gspca/gspca_core.c: [spca5xx_set_light_freq:1889] Sensor currently not support light frequency banding filters.
/usr/src/modules/gspca/gspca_core.c: [gspca_set_isoc_ep:903] ISO EndPoint found 0x81 AlternateSet 7
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
/usr/src/modules/gspca/gspca_core.c: [spca50x_isoc_irq:1110] Non-zero status (-18) in isoc completion handler.
/usr/src/modules/gspca/gspca_core.c: [spca50x_isoc_irq:1110] Non-zero status (-18) in isoc completion handler.
/usr/src/modules/gspca/gspca_core.c: [spca50x_isoc_irq:1110] Non-zero status (-18) in isoc completion handler.
/usr/src/modules/gspca/gspca_core.c: [spca50x_isoc_irq:1110] Non-zero status (-18) in isoc completion handler.
end_request: I/O error, dev sr0, sector 64
isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
/usr/src/modules/gspca/gspca_core.c: [spca5xx_set_light_freq:1889] Sensor currently not support light frequency banding filters.
/usr/src/modules/gspca/gspca_core.c: [gspca_set_isoc_ep:903] ISO EndPoint found 0x81 AlternateSet 7
usbcore: deregistering interface driver gspca
/usr/src/modules/gspca/gspca_core.c: driver gspca deregistered
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: USB GSPCA camera found.(ZC3XX)
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: [spca5xx_probe:4098] Camera type JPEG
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/Vimicro/zc3xx.h: [zc3xx_config:515] Sensor ID:7
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/Vimicro/zc3xx.h: [zc3xx_config:597] Find Sensor HV7131R(c)
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: [spca5xx_getcapability:1215] maxw 640 maxh 480 minw 176 minh 144
usbcore: registered new interface driver gspca
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: gspca driver 2.6.21 registered
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: [spca5xx_set_light_freq:1889] Sensor currently not support light frequency banding filters.
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: [gspca_set_isoc_ep:903] ISO EndPoint found 0x81 AlternateSet 7
I try with the gspca-module-2.6.21-2-686 and with module assistant, but I obtain
the same result.
What can I do to play with my webcam ?
Regards,
adrien
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.21-2-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages gspca-modules-2.6.21-2-686 depends on:
ii linux-image-2.6.21-2-686 [lin 2.6.21-6 Linux 2.6.21 image on PPro/Celeron
gspca-modules-2.6.21-2-686 recommends no packages.
-- no debconf information
Reply to: