Bug#441206: linux-image-2.6.22-2-k7: Firewire 400 external HD fails to be recognized
On Fri, Sep 07, 2007 at 02:58:40PM +0200, maximilian attems wrote:
> > My Western Digital 500GB MyBook external HD fails to be recognized when
> > I plug it through the Firewire 400 port. The following errors appear on
> > the syslog:
> firewire saw fixes, try out latest 2.6.23-rc4, see apt trunk lines
> -> http://wiki.debian.org/DebianKernel
No joy, Maks. I installed linux-image-2.6.23-rc4 from trunk as you asked
me:
Linux monk 2.6.23-rc4-k7 #1 SMP Wed Sep 5 00:17:02 UTC 2007 i686 GNU/Linux
plugged my WD HD via Firewire 400, and the error messages are practically the same:
Sep 7 10:29:19 monk kernel: scsi0 : SBP-2 IEEE-1394
Sep 7 10:29:19 monk kernel: firewire_core: created new fw device fw1 (0 config rom retries, S400)
Sep 7 10:29:20 monk kernel: firewire_sbp2: logged in to sbp2 unit fw1.1 (0 retries)
Sep 7 10:29:20 monk kernel: firewire_sbp2: - management_agent_address: 0xfffff0030000
Sep 7 10:29:20 monk kernel: firewire_sbp2: - command_block_agent_address: 0xfffff0100000
Sep 7 10:29:20 monk kernel: firewire_sbp2: - status write address: 0x000100000000
Sep 7 10:29:25 monk kernel: firewire_sbp2: sbp2_scsi_abort
Sep 7 10:29:30 monk kernel: scsi 0:0:0:0: Direct-Access WD 5000AAKS Externa 107a PQ: 0 ANSI: 4
Sep 7 10:29:30 monk kernel: firewire_core: phy config: card 0, new root=ffc0, gap_count=5
Sep 7 10:29:30 monk kernel: sd 0:0:0:0: [sda] READ CAPACITY failed
Sep 7 10:29:30 monk kernel: sd 0:0:0:0: [sda] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK
Sep 7 10:29:30 monk kernel: sd 0:0:0:0: [sda] Sense not available.
Sep 7 10:29:30 monk kernel: sd 0:0:0:0: [sda] Write Protect is off
Sep 7 10:29:30 monk kernel: sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
Sep 7 10:29:30 monk kernel: sd 0:0:0:0: [sda] Asking for cache data failed
Sep 7 10:29:30 monk kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Sep 7 10:29:30 monk kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Sep 7 10:29:32 monk kernel: firewire_sbp2: orb reply timed out, rcode=0x11
Sep 7 10:29:32 monk kernel: firewire_sbp2: error status: 0:9
Sep 7 10:29:33 monk last message repeated 4 times
Sep 7 10:29:33 monk kernel: firewire_sbp2: failed to reconnect to fw1.1
Sep 7 10:29:34 monk kernel: firewire_sbp2: logged in to sbp2 unit fw1.1 (0 retries)
Sep 7 10:29:34 monk kernel: firewire_sbp2: - management_agent_address: 0xfffff0030000
Sep 7 10:29:34 monk kernel: firewire_sbp2: - command_block_agent_address: 0xfffff0100000
Sep 7 10:29:34 monk kernel: firewire_sbp2: - status write address: 0x000100000000
Regards,
Paulo
Reply to: