Bug#394450: marked as done (xserver-xorg: new install , Radeon 9200 dual head : default conf hangs ; solution)

To: Michel Dänzer <daenzer@debian.org>
Subject: Bug#394450: marked as done (xserver-xorg: new install , Radeon 9200 dual head : default conf hangs ; solution)
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Mon, 30 Jul 2007 06:54:05 +0000
Message-id: <[🔎] handler.394450.D392915.11857782571882.ackdone@bugs.debian.org>
References: <1185778249.16292.366.camel@thor.sulgenrain.local> <20061021104804.GA15048@tonelli.sns.it>

Your message dated Mon, 30 Jul 2007 08:50:48 +0200
with message-id <1185778249.16292.366.camel@thor.sulgenrain.local>
and subject line Is this fixed in 2.6.22?
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: xserver-xorg: new install , Radeon 9200 dual head : default conf hangs ; solution
From: A Mennucc <mennucc1@debian.org>
Date: Sat, 21 Oct 2006 12:48:04 +0200
Message-id: <20061021104804.GA15048@tonelli.sns.it>
Reply-to: mennucc1@debian.org

Package: xserver-xorg
Version: 1:7.0.22
Severity: important

I did a test install of Debian/etch/amd64 ; I have a Radeon card, with two
heads (one digital , one analog ) , and two CRT monitors connected to it
(using good-old  analog cables , and one digital-analog adapter )

lspci reports:

01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200] (Secondary) (rev 01)

After the install, when I reboot, the reboot would hang when GDM tried to start X ,
(nothing shown on the two monitors, kbd unresponsive ), 
and I had to hit "reset" .

I attach the configuration that was causing the problem

I then changed that config , imitating the XFree config that was working
with Sarge; see 2nd attachemt. If I start X using 
 /usr/bin/X11/X +xinerama -layout xinerama_layout 
everything works fine.

a.


-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-amd64
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)

Versions of packages xserver-xorg depends on:
ii  debconf                 1.5.6            Debian configuration management sy
ii  x11-common              1:7.1.0-5        X Window System (X.Org) infrastruc
ii  xbase-clients           1:7.1.ds-3       miscellaneous X clients
ii  xkb-data                0.9-3            X Keyboard Extension (XKB) configu
ii  xserver-xorg-core       2:1.1.1-10       X.Org X server -- core server
ii  xserver-xorg-input-all  1:7.1.0-5        the X.Org X server -- input driver
ii  xserver-xorg-input-evde 1:1.1.2-3        X.Org X server -- evdev input driv
ii  xserver-xorg-input-kbd  1:1.1.0-4        X.Org X server -- keyboard input d
ii  xserver-xorg-input-mous 1:1.1.1-3        X.Org X server -- mouse input driv
ii  xserver-xorg-video-all  1:7.1.0-5        the X.Org X server -- output drive
ii  xserver-xorg-video-apm  1:1.1.1-3        X.Org X server -- APM display driv
ii  xserver-xorg-video-ark  1:0.6.0-3        X.Org X server -- ark display driv
ii  xserver-xorg-video-ati  1:6.6.3-2        X.Org X server -- ATI display driv
ii  xserver-xorg-video-chip 1:1.1.1-4        X.Org X server -- Chips display dr
ii  xserver-xorg-video-cirr 1:1.1.0-3        X.Org X server -- Cirrus display d
ii  xserver-xorg-video-cyri 1:1.1.0-4        X.Org X server -- Cyrix display dr
ii  xserver-xorg-video-dumm 1:0.2.0-3        X.Org X server -- dummy display dr
ii  xserver-xorg-video-fbde 1:0.3.0-3        X.Org X server -- fbdev display dr
ii  xserver-xorg-video-glin 1:1.1.1-3        X.Org X server -- Glint display dr
ii  xserver-xorg-video-i128 1:1.2.0-3        X.Org X server -- i128 display dri
ii  xserver-xorg-video-i810 2:1.7.2-1        X.Org X server -- Intel i8xx, i9xx
ii  xserver-xorg-video-mga  1:1.4.2.dfsg.1-1 X.Org X server -- MGA display driv
ii  xserver-xorg-video-neom 1:1.1.1-4        X.Org X server -- Neomagic display
ii  xserver-xorg-video-nv [ 1:1.2.0-3        X.Org X server -- NV display drive
ii  xserver-xorg-video-rend 1:4.1.0.dfsg.1-4 X.Org X server -- Rendition displa
ii  xserver-xorg-video-s3 [ 1:0.4.1-4        X.Org X server -- legacy S3 displa
ii  xserver-xorg-video-s3vi 1:1.9.1-3        X.Org X server -- S3 ViRGE display
ii  xserver-xorg-video-sava 1:2.1.2-1        X.Org X server -- Savage display d
ii  xserver-xorg-video-sili 1:1.4.1-4        X.Org X server -- SiliconMotion di
ii  xserver-xorg-video-sis  1:0.9.1-4        X.Org X server -- SiS display driv
ii  xserver-xorg-video-sisu 1:0.8.1-3        X.Org X server -- SiS USB display 
ii  xserver-xorg-video-tdfx 1:1.2.1-5        X.Org X server -- tdfx display dri
ii  xserver-xorg-video-tga  1:1.1.0-3        X.Org X server -- TGA display driv
ii  xserver-xorg-video-trid 1:1.2.1-3        X.Org X server -- Trident display 
ii  xserver-xorg-video-tsen 1:1.1.0-3        X.Org X server -- Tseng display dr
ii  xserver-xorg-video-v4l  0.1.1-3          X.Org X server -- Video 4 Linux di
ii  xserver-xorg-video-vesa 1:1.2.1-3        X.Org X server -- VESA display dri
ii  xserver-xorg-video-vga  1:4.1.0-3        X.Org X server -- VGA display driv
ii  xserver-xorg-video-via  1:0.2.1-5        X.Org X server -- VIA display driv
ii  xserver-xorg-video-vood 1:1.1.0-4        X.Org X server -- Voodoo display d

Versions of packages xserver-xorg recommends:
ii  discover1                  1.7.18        hardware identification system
ii  laptop-detect              0.12.1        attempt to detect a laptop
pn  mdetect                    <none>        (no description available)
ii  xresprobe                  0.4.23debian1 X Resolution Probe

-- debconf information:
  xserver-xorg/multiple_possible_x-drivers:
  xserver-xorg/config/monitor/use_sync_ranges:
  xserver-xorg/config/inputdevice/mouse/port: /dev/input/mice
  xserver-xorg/config/doublequote_in_string_error:
  xserver-xorg/config/monitor/screen-size: 17 inches (430 mm)
  shared/default-x-server: xserver-xorg
  xserver-xorg/config/device/default-identifier:
  xserver-xorg/autodetect_monitor: true
  xserver-xorg/config/inputdevice/mouse/protocol: ImPS/2
  shared/no_known_x-server:
  xserver-xorg/config/display/default_depth: 24
  xserver-xorg/config/display/modes: 1280x1024, 1280x960, 1152x864, 1024x768, 832x624, 800x600, 720x400, 640x480
  xserver-xorg/config/device/bus_id_error:
  xserver-xorg/config/monitor/vert-refresh: 48-120
  xserver-xorg/config/inputdevice/keyboard/options:
  xserver-xorg/autodetect_keyboard: false
  xserver-xorg/config/device/use_fbdev: false
  xserver-xorg/config/inputdevice/keyboard/variant:
  xserver-xorg/config/nonnumeric_string_error:
  xserver-xorg/config/inputdevice/keyboard/layout: it
  xserver-xorg/config/modules: i2c, bitmap, ddc, dri, extmod, freetype, glx, int10, type1, vbe
  xserver-xorg/config/monitor/identifier: CPD-G200
  xserver-xorg/config/inputdevice/mouse/emulate3buttons: true
  xserver-xorg/autodetect_mouse: true
  xserver-xorg/config/monitor/horiz-sync: 30-96
  xserver-xorg/config/device/video_ram:
  xserver-xorg/config/monitor/range_input_error:
  xserver-xorg/config/inputdevice/keyboard/model: pc105
  xserver-xorg/config/device/driver: ati
  xserver-xorg/config/device/identifier: ATI Technologies, Inc. RV280 [Radeon 9200]
  xserver-xorg/config/monitor/selection-method: Advanced
  xserver-xorg/config/null_string_error:
  shared/multiple_possible_x-servers:
  xserver-xorg/config/device/bus_id: PCI:1:0:0
  xserver-xorg/config/write_files_section: true
  xserver-xorg/autodetect_video_card: true
  xserver-xorg/config/monitor/mode-list: 1024x768 @ 60Hz
  xserver-xorg/config/inputdevice/keyboard/rules: xorg
  xserver-xorg/config/monitor/default-identifier:

-- 
Andrea Mennucc

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/X11R6/lib/X11/fonts/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/X11R6/lib/X11/fonts/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/X11R6/lib/X11/fonts/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"it"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. RV280 [Radeon 9200]"
	Driver		"ati"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"CPD-G200"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. RV280 [Radeon 9200]"
	Monitor		"CPD-G200"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/X11R6/lib/X11/fonts/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/X11R6/lib/X11/fonts/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/X11R6/lib/X11/fonts/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"it"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. RV280 [Radeon 9200]"
	Driver		"ati"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"CPD-G200"
	Option		"DPMS"
	HorizSync	30-70
	VertRefresh	50-160
	Option		"DPMS"
	Option		"EDID"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. RV280 [Radeon 9200]"
	Monitor		"CPD-G200"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection




########### dual head

Section "Monitor"
	Identifier	"soNy2"
	HorizSync	30-70
	VertRefresh	50-160
	Option		"DPMS"
EndSection


Section "Device"
	Identifier	"ati radeon 9200 2"
	Driver		"ati"
	Screen		1
	BusID		"PCI:1:0:0"
	#Option		"AGPMode"	"4"
EndSection


Section "Screen"
	Identifier	"Default Screen2"
	Device		"ati radeon 9200 2"
	Monitor		"soNy2"
	DefaultDepth	24
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"xinerama_layout"
	Screen		"Default Screen2" LeftOf "Default Screen"
	Screen		"Default Screen"
	Option		"Xinerama"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse" "CorePointer"
#	InputDevice	"Generic Mouse" "SendCoreEvents"
EndSection

--- End Message ---

--- Begin Message ---

To: Touko Korpela <tkorpela@phnet.fi>

Cc: 392915-done@bugs.debian.org

Subject: Re: Is this fixed in 2.6.22?

From: Michel Dänzer <daenzer@debian.org>

Date: Mon, 30 Jul 2007 08:50:48 +0200

Message-id: <1185778249.16292.366.camel@thor.sulgenrain.local>

In-reply-to: <[🔎] 20070729231721.GA3993@norsu.vuoristo.local>

References: <[🔎] 20070729231721.GA3993@norsu.vuoristo.local>
Version: 2.6.22-1


On Mon, 2007-07-30 at 02:17 +0300, Touko Korpela wrote:
> Is fix for this freeze included in recent kernels?

Yes, according to gitk and friends it made it into 2.6.22. Marking as
fixed there.


-- 
Earthling Michel Dänzer           |          http://tungstengraphics.com
Libre software enthusiast         |          Debian, X and DRI developer
--- End Message ---

Reply to:

Prev by Date: Bug#392915: marked as done (xserver-xorg-video-ati: xserver freezes system when starting)
Next by Date: Bug#435226: linux-image-2.6.22-1-powerpc nvidia frame buffer and ams problems
Previous by thread: Bug#392915: marked as done (xserver-xorg-video-ati: xserver freezes system when starting)
Next by thread: Bug#435226: linux-image-2.6.22-1-powerpc nvidia frame buffer and ams problems
Index(es):
- Date
- Thread