Bug#427987: XFS, linux-image-2.6.18-4-686 , "BUG: unable to handle kernel paging request"
Package: linux-image-2.6.18-4-686
Version: 2.6.18.dfsg.1-12
dmesg when bug happens:
(This time i run rsync, but same thing/output happens with all kind of
programs)
Filesystem "md3": Disabling barriers, not supported by the underlying
device
XFS mounting filesystem md3
Ending clean XFS mount for filesystem: md3
BUG: unable to handle kernel paging request at virtual address 616c769d
printing eip:
f8c820b7
*pde = 00000000
Oops: 0000 [#1]
SMP
Modules linked in: ipv6 xfs dm_snapshot dm_mirror dm_mod loop serio_raw
snd_hda_intel snd_hda_codec parport_pc parport snd_pcm psmouse rtc
snd_timer snd soundcore snd_page_alloc pcspkr i2c_viapro i2c_core shpchp
pci_hotplug evdev ext3 jbd mbcache raid1 md_mod ide_generic sd_mod
ide_cd cdrom jmicron generic ehci_hcd via_rhine mii ahci sata_via
uhci_hcd usbcore via82cxxx ide_core libata scsi_mod thermal processor
fan
CPU: 0
EIP: 0060:[<f8c820b7>] Not tainted VLI
EFLAGS: 00010202 (2.6.18-4-686 #1)
EIP is at xfs_iget+0x92/0x649 [xfs]
eax: 616c7661 ebx: f2f512f8 ecx: 616c7661 edx: 72660000
esi: ee6ea800 edi: 070c76ea ebp: 00000000 esp: d946fd50
ds: 007b es: 007b ss: 0068
Process rsync (pid: 2795, ti=d946e000 task=c19abaa0 task.ti=d946e000)
Stack: 00000000 dfb35c00 d238609c d2386080 00000000 00000021 616c7661
00000000
ee6ea800 00000008 d946fdc8 f8c9847e 070c76ea 00000000 00000000
00000000
d946fdc8 00000000 00000000 00000005 ee6ea800 00000008 ee6ea820
f8c9ba00
Call Trace:
[<f8c9847e>] xfs_dir_lookup_int+0x4f/0xa6 [xfs]
[<f8c9ba00>] xfs_lookup+0x4c/0x73 [xfs]
[<f8ca707f>] xfs_vn_lookup+0x28/0x5d [xfs]
[<c016537c>] do_lookup+0xa3/0x135
[<c0166f45>] __link_path_walk+0x865/0xd1d
[<c01b74c6>] _atomic_dec_and_lock+0x2a/0x44
[<c0167446>] link_path_walk+0x49/0xbd
[<c016780f>] do_path_lookup+0x20a/0x225
[<c0167f46>] __user_walk_fd+0x29/0x3f
[<c0161e04>] vfs_lstat_fd+0x12/0x39
[<c0161e70>] sys_lstat64+0xf/0x23
[<c0102c11>] sysenter_past_esp+0x56/0x79
Code: e8 4e 7a 02 00 89 f8 31 d2 8b 4c 24 04 f7 b1 1c 01 00 00 6b da 0c
03 99 20 01 00 00 8d 43 04 e8 d8 f3 5f c7 8b 03 e9 53 01 00 00 <8b> 51
3c 8b 41 38 39 ea 0f 85 42 01 00 00 39 f8 0f 85 3a 01 00
EIP: [<f8c820b7>] xfs_iget+0x92/0x649 [xfs] SS:ESP 0068:d946fd50
When I reboot the kernel complains about broken file system and I need
to reboot:
"Fixing recursive fault but reboot is needed"
A more complete kern.log with forced reboots:
---------------------------------------------
Jun 7 15:50:55 peggy kernel: lo: Disabled Privacy Extensions
Jun 7 15:50:55 peggy kernel: IPv6 over IPv4 tunneling driver
Jun 7 15:51:06 peggy kernel: eth0: no IPv6 routers present
Jun 7 17:18:24 peggy kernel: general protection fault: 0000 [#1]
Jun 7 17:18:24 peggy kernel: SMP
Jun 7 17:18:24 peggy kernel: Modules linked in: ipv6 ppdev lp button ac
battery xfs dm_snapshot dm_mirror dm_mod loop serio_raw psmouse pcspkr
snd_hda_intel
snd_hda_codec parport_pc parport rtc shpchp pci_hotplug i2c_viapro
i2c_core snd_pcm snd_timer snd soundcore snd_page_alloc evdev ext3 jbd
mbcache raid1 md_m
od ide_generic jmicron sd_mod ide_cd cdrom generic ehci_hcd via_rhine
mii uhci_hcd via82cxxx ahci sata_via usbcore ide_core libata scsi_mod
thermal processor
fan
Jun 7 17:18:24 peggy kernel: CPU: 0
Jun 7 17:18:24 peggy kernel: EIP: 0060:[<c0141809>] Not tainted
VLI
Jun 7 17:18:24 peggy kernel: EFLAGS: 00010086 (2.6.18-4-686 #1)
Jun 7 17:18:24 peggy kernel: EIP is at find_lock_page+0x20/0x77
Jun 7 17:18:24 peggy kernel: eax: ffffffff ebx: 00000000 ecx:
00000200 edx: 00000000
Jun 7 17:18:24 peggy kernel: esi: ffffffff edi: df8337d8 ebp:
00b113ad esp: f2b67bf8
Jun 7 17:18:24 peggy kernel: ds: 007b es: 007b ss: 0068
Jun 7 17:18:24 peggy kernel: Process rsync (pid: 3102, ti=f2b66000
task=dff65000 task.ti=f2b66000)
Jun 7 17:18:24 peggy kernel: Stack: 00000000 00000000 00000250 00000000
c0143ad4 00b113ad df8337d8 c02cdbc0
Jun 7 17:18:24 peggy kernel: 0000000b 00000000 00000000 f320a280
f8ca5b69 ffffffff 05889d68 00000000
Jun 7 17:18:24 peggy kernel: 00000000 00002000 00b113ad 00000002
00000250 00001000 df8337d8 00000000
Jun 7 17:18:24 peggy kernel: Call Trace:
Jun 7 17:18:24 peggy kernel: [<c0143ad4>] find_or_create_page
+0x2f/0x8c
Jun 7 17:18:24 peggy kernel: [<f8ca5b69>] xfs_buf_get_flags
+0x128/0x3bd [xfs]
Jun 7 17:18:24 peggy kernel: [<f8ca5e11>] xfs_buf_read_flags+0x13/0x77
[xfs]
Jun 7 17:18:24 peggy kernel: [<f8c99791>] xfs_trans_read_buf
+0x3a/0x2bf [xfs]
Jun 7 17:18:24 peggy kernel: [<f8c863ba>] xfs_itobp+0x101/0x1b9 [xfs]
Jun 7 17:18:24 peggy kernel: [<f8c888a5>] xfs_iread+0x58/0x653 [xfs]
Jun 7 17:18:24 peggy kernel: [<f8ca2e15>] kmem_zone_alloc+0x4d/0x91
[xfs]
Jun 7 17:18:24 peggy kernel: [<f8cab37e>] xfs_fs_alloc_inode+0xf/0x1b
[xfs]
Jun 7 17:18:24 peggy kernel: [<c016eda7>] alloc_inode+0xf2/0x17a
Jun 7 17:18:24 peggy kernel: [<f8c8425b>] xfs_iget+0x236/0x649 [xfs]
Jun 7 17:18:24 peggy kernel: [<f8c9a47e>] xfs_dir_lookup_int+0x4f/0xa6
[xfs]
Jun 7 17:18:24 peggy kernel: [<f8c9da00>] xfs_lookup+0x4c/0x73 [xfs]
Jun 7 17:18:24 peggy kernel: [<f8ca907f>] xfs_vn_lookup+0x28/0x5d
[xfs]
Jun 7 17:18:24 peggy kernel: [<c016537c>] do_lookup+0xa3/0x135
Jun 7 17:18:24 peggy kernel: [<c0166f45>] __link_path_walk+0x865/0xd1d
Jun 7 17:18:24 peggy kernel: [<c0167446>] link_path_walk+0x49/0xbd
Jun 7 17:18:24 peggy kernel: [<c016780f>] do_path_lookup+0x20a/0x225
Jun 7 17:18:24 peggy kernel: [<c0167f46>] __user_walk_fd+0x29/0x3f
Jun 7 17:18:24 peggy kernel: [<c0161e04>] vfs_lstat_fd+0x12/0x39
Jun 7 17:18:24 peggy kernel: [<c0161e70>] sys_lstat64+0xf/0x23
Jun 7 17:18:24 peggy kernel: [<c0102c11>] sysenter_past_esp+0x56/0x79
Jun 7 17:18:24 peggy kernel: Code: ff 89 da 31 c9 5b e9 00 c1 fe ff 55
89 d5 57 89 c7 56 53 8d 40 10 e8 ac fc 13 00 8d 47 04 89 ea e8 2d 73 07
00 85 c0 89 c6 74 4b <8b> 00 89 f2 f6 c4 40 74 03 8b 56 0c f0 ff 42 04
f0 0f ba 2e 00
Jun 7 17:18:24 peggy kernel: EIP: [<c0141809>] find_lock_page+0x20/0x77
SS:ESP 0068:f2b67bf8
Jun 7 17:22:28 peggy kernel: <0>------------[ cut here ]------------
Jun 7 17:22:28 peggy kernel: kernel BUG at fs/inode.c:250!
Jun 7 17:22:28 peggy kernel: invalid opcode: 0000 [#2]
Jun 7 17:22:28 peggy kernel: SMP
Jun 7 17:22:28 peggy kernel: Modules linked in: ipv6 ppdev lp button ac
battery xfs dm_snapshot dm_mirror dm_mod loop serio_raw psmouse pcspkr
snd_hda_intel snd_hda_codec parport_pc parport rtc shpchp pci_hotplug
i2c_viapro i2c_core snd_pcm snd_timer snd soundcore snd_page_alloc evdev
ext3 jbd mbcache raid1 md_mod ide_generic jmicron sd_mod ide_cd cdrom
generic ehci_hcd via_rhine mii uhci_hcd via82cxxx ahci sata_via usbcore
ide_core libata scsi_mod thermal processor fan
Jun 7 17:22:28 peggy kernel: CPU: 0
Jun 7 17:22:28 peggy kernel: EIP: 0060:[<c016ee41>] Not tainted
VLI
Jun 7 17:22:28 peggy kernel: EFLAGS: 00010206 (2.6.18-4-686 #1)
Jun 7 17:22:28 peggy kernel: EIP is at clear_inode+0x12/0xd8
Jun 7 17:22:28 peggy kernel: eax: f0ea521c ebx: f0ea521c ecx:
0000000e edx: ffffffff
Jun 7 17:22:28 peggy kernel: esi: 00000000 edi: f0ec85b8 ebp:
f0eba000 esp: f0ed7f38
Jun 7 17:22:28 peggy kernel: ds: 007b es: 007b ss: 0068
Jun 7 17:22:28 peggy kernel: Process nmbd (pid: 3154, ti=f0ed6000
task=c18cdaa0 task.ti=f0ed6000)
Jun 7 17:22:28 peggy kernel: Stack: f0ea521c 00000000 c016efc4 f0ea521c
00000000 c016ea72 f0ea521c c0167b67
Jun 7 17:22:28 peggy kernel: f33146c0 dfc996c0 d3c2a9a3 00000008
f0eba00f 00000010 00000000 00000000
Jun 7 17:22:28 peggy kernel: c01b74c6 00000002 dfcd3ef0 dfcaf3f4
b7d74ce0 c18cdaa0 c01154b6 00000000
Jun 7 17:22:28 peggy kernel: Call Trace:
Jun 7 17:22:28 peggy kernel: [<c016efc4>] generic_delete_inode
+0xbd/0x10f
Jun 7 17:22:28 peggy kernel: [<c016ea72>] iput+0x64/0x66
Jun 7 17:22:28 peggy kernel: [<c0167b67>] do_unlinkat+0xa7/0x113
Jun 7 17:22:28 peggy kernel: [<c01b74c6>] _atomic_dec_and_lock
+0x2a/0x44
Jun 7 17:22:28 peggy kernel: [<c01154b6>] do_page_fault+0x18a/0x481
Jun 7 17:22:28 peggy kernel: [<c0102c11>] sysenter_past_esp+0x56/0x79
Jun 7 17:22:28 peggy kernel: Code: 89 41 40 c7 83 58 01 00 00 00 00 00
00 89 8b a8 00 00 00 89 d8 5b 5e 5f c3 56 53 89 c3 e8 01 f4 fe ff 83 bb
dc 00 00 00 00 74 08 <0f> 0b fa 00 55 d9 29 c0 8b 83 44 01 00 00 a8 10
75 08 0f 0b fb
Jun 7 17:22:28 peggy kernel: EIP: [<c016ee41>] clear_inode+0x12/0xd8
SS:ESP 0068:f0ed7f38
Jun 7 17:29:41 peggy kernel: klogd 1.4.1#18, log source = /proc/kmsg
started.
Jun 7 17:29:41 peggy kernel: Linux version 2.6.18-4-686 (Debian
2.6.18.dfsg.1-12etch2) (dannf@debian.org) (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) #1 SMP Wed May 9 23:03:12 UTC 2007
Jun 7 17:29:41 peggy kernel: BIOS-provided physical RAM map:
Jun 7 17:29:41 peggy kernel: BIOS-e820: 0000000000000000 -
000000000009f000 (usable)
Jun 7 17:29:41 peggy kernel: BIOS-e820: 000000000009f000 -
00000000000a0000 (reserved)
Jun 7 17:29:41 peggy kernel: BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
Jun 7 17:29:41 peggy kernel: BIOS-e820: 0000000000100000 -
000000003bee0000 (usable)
Jun 7 17:29:41 peggy kernel: BIOS-e820: 000000003bee0000 -
000000003bee3000 (ACPI NVS)
Jun 7 17:29:41 peggy kernel: BIOS-e820: 000000003bee3000 -
000000003bef0000 (ACPI data)
Jun 7 17:29:41 peggy kernel: BIOS-e820: 000000003bef0000 -
000000003bf00000 (reserved)
Jun 7 17:29:41 peggy kernel: BIOS-e820: 00000000e0000000 -
00000000f0000000 (reserved)
Jun 7 17:29:41 peggy kernel: BIOS-e820: 00000000fec00000 -
0000000100000000 (reserved)
Jun 7 17:29:41 peggy kernel: 62MB HIGHMEM available.
Jun 7 17:29:41 peggy kernel: 896MB LOWMEM available.
Jun 7 17:29:41 peggy kernel: found SMP MP-table at 000f5620
Jun 7 17:29:41 peggy kernel: On node 0 totalpages: 245472
Jun 7 17:29:41 peggy kernel: DMA zone: 4096 pages, LIFO batch:0
Jun 7 17:29:41 peggy kernel: Normal zone: 225280 pages, LIFO batch:31
Jun 7 17:29:41 peggy kernel: HighMem zone: 16096 pages, LIFO batch:3
Jun 7 17:29:41 peggy kernel: DMI 2.3 present.
Jun 7 17:29:41 peggy kernel: ACPI: RSDP (v002
AWARD ) @ 0x000f7540
Jun 7 17:29:41 peggy kernel: ACPI: XSDT (v001 AWARD ASUSACPI
0x42302e31 AWRD 0x00000000) @ 0x3bee30c0
Jun 7 17:29:41 peggy kernel: ACPI: FADT (v003 AWARD ASUSACPI
0x42302e31 AWRD 0x00000000) @ 0x3beea9c0
Jun 7 17:29:41 peggy kernel: ACPI: MCFG (v001 AWARD ASUSACPI
0x42302e31 AWRD 0x00000000) @ 0x3beeac00
Jun 7 17:29:41 peggy kernel: ACPI: MADT (v001 AWARD ASUSACPI
0x42302e31 AWRD 0x00000000) @ 0x3beeab00
Jun 7 17:29:41 peggy kernel: ACPI: DSDT (v001 AWARD ASUSACPI
0x00001000 MSFT 0x0100000e) @ 0x00000000
Jun 7 17:29:41 peggy kernel: ACPI: PM-Timer IO Port: 0x408
Jun 7 17:29:41 peggy kernel: ACPI: Local APIC address 0xfee00000
Jun 7 17:29:41 peggy kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00]
enabled)
Jun 7 17:29:41 peggy kernel: Processor #0 15:4 APIC version 20
Jun 7 17:29:41 peggy kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01]
enabled)
Jun 7 17:29:41 peggy kernel: Processor #1 15:4 APIC version 20
Jun 7 17:29:41 peggy kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02]
disabled)
Jun 7 17:29:41 peggy kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03]
disabled)
Jun 7 17:29:41 peggy kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge
lint[0x1])
Jun 7 17:29:41 peggy kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge
lint[0x1])
Jun 7 17:29:41 peggy kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge
lint[0x1])
Jun 7 17:29:41 peggy kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge
lint[0x1])
Jun 7 17:29:41 peggy kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000]
gsi_base[0])
Jun 7 17:29:41 peggy kernel: IOAPIC[0]: apic_id 4, version 3, address
0xfec00000, GSI 0-23
Jun 7 17:29:41 peggy kernel: ACPI: IOAPIC (id[0x05] address[0xfecc0000]
gsi_base[24])
Jun 7 17:29:41 peggy kernel: IOAPIC[1]: apic_id 5, version 3, address
0xfecc0000, GSI 24-47
Jun 7 17:29:41 peggy kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0
global_irq 2 dfl dfl)
Jun 7 17:29:41 peggy kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9
global_irq 9 low level)
Jun 7 17:29:41 peggy kernel: ACPI: IRQ0 used by override.
Jun 7 17:29:41 peggy kernel: ACPI: IRQ2 used by override.
Jun 7 17:29:41 peggy kernel: ACPI: IRQ9 used by override.
Jun 7 17:29:41 peggy kernel: Enabling APIC mode: Flat. Using 2 I/O
APICs
Jun 7 17:29:41 peggy kernel: Using ACPI (MADT) for SMP configuration
information
Jun 7 17:29:41 peggy kernel: Allocating PCI resources starting at
40000000 (gap: 3bf00000:a4100000)
Jun 7 17:29:41 peggy kernel: Detected 3059.337 MHz processor.
Jun 7 17:29:41 peggy kernel: Built 1 zonelists. Total pages: 245472
Jun 7 17:29:41 peggy kernel: Kernel command line: root=/dev/md1 ro
Jun 7 17:29:41 peggy kernel: mapped APIC to ffffd000 (fee00000)
Jun 7 17:29:41 peggy kernel: mapped IOAPIC to ffffc000 (fec00000)
Jun 7 17:29:41 peggy kernel: mapped IOAPIC to ffffb000 (fecc0000)
Jun 7 17:29:41 peggy kernel: Enabling fast FPU save and restore...
done.
Jun 7 17:29:41 peggy kernel: Enabling unmasked SIMD FPU exception
support... done.
Jun 7 17:29:41 peggy kernel: Initializing CPU#0
Jun 7 17:29:41 peggy kernel: PID hash table entries: 4096 (order: 12,
16384 bytes)
Jun 7 17:29:41 peggy kernel: Console: colour VGA+ 80x25
Jun 7 17:29:41 peggy kernel: Dentry cache hash table entries: 131072
(order: 7, 524288 bytes)
Jun 7 17:29:41 peggy kernel: Inode-cache hash table entries: 65536
(order: 6, 262144 bytes)
Jun 7 17:29:41 peggy kernel: Memory: 965488k/981888k available (1544k
kernel code, 15808k reserved, 577k data, 196k init, 64384k highmem)
Jun 7 17:29:41 peggy kernel: Checking if this processor honours the WP
bit even in supervisor mode... Ok.
Jun 7 17:29:41 peggy kernel: Calibrating delay using timer specific
routine.. 6125.40 BogoMIPS (lpj=12250813)
Jun 7 17:29:41 peggy kernel: Security Framework v1.0.0 initialized
Jun 7 17:29:41 peggy kernel: SELinux: Disabled at boot.
Jun 7 17:29:41 peggy kernel: Capability LSM initialized
Jun 7 17:29:41 peggy kernel: Mount-cache hash table entries: 512
Jun 7 17:29:41 peggy kernel: CPU: After generic identify, caps:
bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
Jun 7 17:29:41 peggy kernel: CPU: After vendor identify, caps: bfebfbff
20100000 00000000 00000000 0000651d 00000000 00000001
Jun 7 17:29:41 peggy kernel: monitor/mwait feature present.
Jun 7 17:29:41 peggy kernel: using mwait in idle threads.
Jun 7 17:29:41 peggy kernel: CPU: Trace cache: 12K uops, L1 D cache:
16K
Jun 7 17:29:41 peggy kernel: CPU: L2 cache: 1024K
Jun 7 17:29:41 peggy kernel: CPU: Physical Processor ID: 0
Jun 7 17:29:41 peggy kernel: CPU: After all inits, caps: bfebfbff
20100000 00000000 00000180 0000651d 00000000 00000001
Jun 7 17:29:41 peggy kernel: Intel machine check architecture
supported.
Jun 7 17:29:41 peggy kernel: Intel machine check reporting enabled on
CPU#0.
Jun 7 17:29:41 peggy kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (24)
available
Jun 7 17:29:41 peggy kernel: CPU0: Thermal monitoring enabled
Jun 7 17:29:41 peggy kernel: Compat vDSO mapped to ffffe000.
Jun 7 17:29:41 peggy kernel: Checking 'hlt' instruction... OK.
Jun 7 17:29:41 peggy kernel: SMP alternatives: switching to UP code
Jun 7 17:29:41 peggy kernel: ACPI: Core revision 20060707
Jun 7 17:29:41 peggy kernel: CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz
stepping 09
Jun 7 17:29:41 peggy kernel: SMP alternatives: switching to SMP code
Jun 7 17:29:41 peggy kernel: Booting processor 1/1 eip 3000
Jun 7 17:29:41 peggy kernel: Initializing CPU#1
Jun 7 17:29:41 peggy kernel: Calibrating delay using timer specific
routine.. 6118.46 BogoMIPS (lpj=12236927)
Jun 7 17:29:41 peggy kernel: CPU: After generic identify, caps:
bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
Jun 7 17:29:41 peggy kernel: CPU: After vendor identify, caps: bfebfbff
20100000 00000000 00000000 0000651d 00000000 00000001
Jun 7 17:29:41 peggy kernel: monitor/mwait feature present.
Jun 7 17:29:41 peggy kernel: CPU: Trace cache: 12K uops, L1 D cache:
16K
Jun 7 17:29:41 peggy kernel: CPU: L2 cache: 1024K
Jun 7 17:29:41 peggy kernel: CPU: Physical Processor ID: 0
Jun 7 17:29:41 peggy kernel: CPU: After all inits, caps: bfebfbff
20100000 00000000 00000180 0000651d 00000000 00000001
Jun 7 17:29:41 peggy kernel: Intel machine check architecture
supported.
Jun 7 17:29:41 peggy kernel: Intel machine check reporting enabled on
CPU#1.
Jun 7 17:29:41 peggy kernel: CPU1: Intel P4/Xeon Extended MCE MSRs (24)
available
Jun 7 17:29:41 peggy kernel: CPU1: Thermal monitoring enabled
Jun 7 17:29:41 peggy kernel: CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz
stepping 09
Jun 7 17:29:41 peggy kernel: Total of 2 processors activated (12243.87
BogoMIPS).
Jun 7 17:29:41 peggy kernel: ENABLING IO-APIC IRQs
Jun 7 17:29:41 peggy kernel: ..TIMER: vector=0x31 apic1=0 pin1=2
apic2=-1 pin2=-1
Jun 7 17:29:41 peggy kernel: checking TSC synchronization across 2
CPUs: passed.
Jun 7 17:29:41 peggy kernel: Brought up 2 CPUs
Jun 7 17:29:41 peggy kernel: migration_cost=163
Jun 7 17:29:41 peggy kernel: checking if image is initramfs... it is
Jun 7 17:29:41 peggy kernel: Freeing initrd memory: 4613k freed
Jun 7 17:29:41 peggy kernel: NET: Registered protocol family 16
Jun 7 17:29:41 peggy kernel: ACPI: bus type pci registered
Jun 7 17:29:41 peggy kernel: PCI: Using MMCONFIG
Jun 7 17:29:41 peggy kernel: Setting up standard PCI resources
Jun 7 17:29:41 peggy kernel: ACPI: Interpreter enabled
Jun 7 17:29:41 peggy kernel: ACPI: Using IOAPIC for interrupt routing
Jun 7 17:29:41 peggy kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jun 7 17:29:41 peggy kernel: PCI: Probing PCI hardware (bus 00)
Jun 7 17:29:41 peggy kernel: Boot video device is 0000:01:00.0
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0._PRT]
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PEX0._PRT]
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4
6 7 *10 11 12)
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4
6 7 10 11 12) *5
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4
6 7 10 11 12)
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4
*6 7 10 11 12)
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4
6 7 10 11 12) *0, disabled.
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4
6 7 10 11 12) *0, disabled.
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4
6 7 10 11 12) *0, disabled.
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4
6 7 10 *11 12)
Jun 7 17:29:41 peggy kernel: ACPI: PCI Root Bridge [PCI1] (0000:80)
Jun 7 17:29:41 peggy kernel: PCI: Probing PCI hardware (bus 80)
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt Routing Table
[\_SB_.PCI1._PRT]
Jun 7 17:29:41 peggy kernel: Linux Plug and Play Support v0.97 (c) Adam
Belay
Jun 7 17:29:41 peggy kernel: pnp: PnP ACPI init
Jun 7 17:29:41 peggy kernel: pnp: PnP ACPI: found 14 devices
Jun 7 17:29:41 peggy kernel: PnPBIOS: Disabled by ACPI PNP
Jun 7 17:29:41 peggy kernel: PCI: Using ACPI for IRQ routing
Jun 7 17:29:41 peggy kernel: PCI: If a device doesn't work, try
"pci=routeirq". If it helps, post a report
Jun 7 17:29:41 peggy kernel: pnp: 00:01: ioport range 0x400-0x47f could
not be reserved
Jun 7 17:29:41 peggy kernel: pnp: 00:01: ioport range 0x500-0x50f has
been reserved
Jun 7 17:29:41 peggy kernel: PCI: Bridge: 0000:00:01.0
Jun 7 17:29:41 peggy kernel: IO window: disabled.
Jun 7 17:29:41 peggy kernel: MEM window: dd000000-deffffff
Jun 7 17:29:41 peggy kernel: PREFETCH window: d8000000-dbffffff
Jun 7 17:29:41 peggy kernel: PCI: Bridge: 0000:00:03.0
Jun 7 17:29:41 peggy kernel: IO window: b000-cfff
Jun 7 17:29:41 peggy kernel: MEM window: dfe00000-dfefffff
Jun 7 17:29:41 peggy kernel: PREFETCH window: disabled.
Jun 7 17:29:41 peggy kernel: PCI: Setting latency timer of device
0000:00:01.0 to 64
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI
31 (level, low) -> IRQ 169
Jun 7 17:29:41 peggy kernel: PCI: Setting latency timer of device
0000:00:03.0 to 64
Jun 7 17:29:41 peggy kernel: NET: Registered protocol family 2
Jun 7 17:29:41 peggy kernel: IP route cache hash table entries: 32768
(order: 5, 131072 bytes)
Jun 7 17:29:41 peggy kernel: TCP established hash table entries: 131072
(order: 8, 1048576 bytes)
Jun 7 17:29:41 peggy kernel: TCP bind hash table entries: 65536 (order:
7, 524288 bytes)
Jun 7 17:29:41 peggy kernel: TCP: Hash tables configured (established
131072 bind 65536)
Jun 7 17:29:41 peggy kernel: TCP reno registered
Jun 7 17:29:41 peggy kernel: audit: initializing netlink socket
(disabled)
Jun 7 17:29:41 peggy kernel: audit(1181237364.168:1): initialized
Jun 7 17:29:41 peggy kernel: highmem bounce pool size: 64 pages
Jun 7 17:29:41 peggy kernel: VFS: Disk quotas dquot_6.5.1
Jun 7 17:29:41 peggy kernel: Dquot-cache hash table entries: 1024
(order 0, 4096 bytes)
Jun 7 17:29:41 peggy kernel: Initializing Cryptographic API
Jun 7 17:29:41 peggy kernel: io scheduler noop registered
Jun 7 17:29:41 peggy kernel: io scheduler anticipatory registered
Jun 7 17:29:41 peggy kernel: io scheduler deadline registered
Jun 7 17:29:41 peggy kernel: io scheduler cfq registered (default)
Jun 7 17:29:41 peggy kernel: PCI: Setting latency timer of device
0000:00:03.0 to 64
Jun 7 17:29:41 peggy kernel: assign_interrupt_mode Found MSI capability
Jun 7 17:29:41 peggy kernel: Allocate Port Service[0000:00:03.0:pcie00]
Jun 7 17:29:41 peggy kernel: Allocate Port Service[0000:00:03.0:pcie01]
Jun 7 17:29:41 peggy kernel: Allocate Port Service[0000:00:03.0:pcie02]
Jun 7 17:29:41 peggy kernel: Allocate Port Service[0000:00:03.0:pcie03]
Jun 7 17:29:41 peggy kernel: isapnp: Scanning for PnP cards...
Jun 7 17:29:41 peggy kernel: isapnp: No Plug & Play device found
Jun 7 17:29:41 peggy kernel: Serial: 8250/16550 driver $Revision: 1.90
$ 4 ports, IRQ sharing enabled
Jun 7 17:29:41 peggy kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4)
is a 16550A
Jun 7 17:29:41 peggy kernel: 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a
16550A
Jun 7 17:29:41 peggy kernel: RAMDISK driver initialized: 16 RAM disks
of 8192K size 1024 blocksize
Jun 7 17:29:41 peggy kernel: PNP: PS/2 Controller [PNP0303:PS2K] at
0x60,0x64 irq 1
Jun 7 17:29:41 peggy kernel: PNP: PS/2 controller doesn't have AUX irq;
using default 12
Jun 7 17:29:41 peggy kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 7 17:29:41 peggy kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 7 17:29:41 peggy kernel: mice: PS/2 mouse device common for all
mice
Jun 7 17:29:41 peggy kernel: TCP bic registered
Jun 7 17:29:41 peggy kernel: NET: Registered protocol family 1
Jun 7 17:29:41 peggy kernel: NET: Registered protocol family 17
Jun 7 17:29:41 peggy kernel: NET: Registered protocol family 8
Jun 7 17:29:41 peggy kernel: NET: Registered protocol family 20
Jun 7 17:29:41 peggy kernel: Starting balanced_irq
Jun 7 17:29:41 peggy kernel: Using IPI No-Shortcut mode
Jun 7 17:29:41 peggy kernel: ACPI: (supports S0 S1 S3 S4 S5)
Jun 7 17:29:41 peggy kernel: Freeing unused kernel memory: 196k freed
Jun 7 17:29:41 peggy kernel: Time: tsc clocksource has been installed.
Jun 7 17:29:41 peggy kernel: input: AT Translated Set 2 keyboard
as /class/input/input0
Jun 7 17:29:41 peggy kernel: ACPI: Fan [FAN] (on)
Jun 7 17:29:41 peggy kernel: ACPI Exception (acpi_processor-0681):
AE_NOT_FOUND, Processor Device is not present [20060707]
Jun 7 17:29:41 peggy kernel: ACPI: Getting cpuindex for acpiid 0x2
Jun 7 17:29:41 peggy kernel: ACPI Exception (acpi_processor-0681):
AE_NOT_FOUND, Processor Device is not present [20060707]
Jun 7 17:29:41 peggy kernel: ACPI: Getting cpuindex for acpiid 0x3
Jun 7 17:29:41 peggy kernel: ACPI: Thermal Zone [THRM] (40 C)
Jun 7 17:29:41 peggy kernel: SCSI subsystem initialized
Jun 7 17:29:41 peggy kernel: libata version 2.00 loaded.
Jun 7 17:29:41 peggy kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
Jun 7 17:29:41 peggy kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx
Jun 7 17:29:41 peggy kernel: sata_via 0000:00:0f.0: version 2.0
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI
21 (level, low) -> IRQ 193
Jun 7 17:29:41 peggy kernel: sata_via 0000:00:0f.0: routed to hard irq
line 11
Jun 7 17:29:41 peggy kernel: ata1: SATA max UDMA/133 cmd 0xFC00 ctl
0xF802 bmdma 0xEC00 irq 193
Jun 7 17:29:41 peggy kernel: ata2: SATA max UDMA/133 cmd 0xF400 ctl
0xF002 bmdma 0xEC08 irq 193
Jun 7 17:29:41 peggy kernel: scsi0 : sata_via
Jun 7 17:29:41 peggy kernel: usbcore: registered new driver usbfs
Jun 7 17:29:41 peggy kernel: usbcore: registered new driver hub
Jun 7 17:29:41 peggy kernel: USB Universal Host Controller Interface
driver v3.0
Jun 7 17:29:41 peggy kernel: via-rhine.c:v1.10-LK1.4.1 July-24-2006
Written by Donald Becker
Jun 7 17:29:41 peggy kernel: ata1: SATA link up 1.5 Gbps (SStatus 113
SControl 300)
Jun 7 17:29:41 peggy kernel: ata1.00: ATA-7, max UDMA/133, 156301488
sectors: LBA48 NCQ (depth 0/32)
Jun 7 17:29:41 peggy kernel: ata1.00: ata1: dev 0 multi count 16
Jun 7 17:29:41 peggy kernel: ata1.00: configured for UDMA/133
Jun 7 17:29:41 peggy kernel: scsi1 : sata_via
Jun 7 17:29:41 peggy kernel: ata2: SATA link up 1.5 Gbps (SStatus 113
SControl 300)
Jun 7 17:29:41 peggy kernel: ata2.00: ATA-7, max UDMA/133, 156301488
sectors: LBA48 NCQ (depth 0/32)
Jun 7 17:29:41 peggy kernel: ata2.00: ata2: dev 0 multi count 16
Jun 7 17:29:41 peggy kernel: ata2.00: configured for UDMA/133
Jun 7 17:29:41 peggy kernel: Vendor: ATA Model: ST380811AS
Rev: 3.AA
Jun 7 17:29:41 peggy kernel: Type: Direct-Access
ANSI SCSI revision: 05
Jun 7 17:29:41 peggy kernel: Vendor: ATA Model: ST380811AS
Rev: 3.AA
Jun 7 17:29:41 peggy kernel: Type: Direct-Access
ANSI SCSI revision: 05
Jun 7 17:29:41 peggy kernel: VP_IDE: IDE controller at PCI slot
0000:00:0f.1
Jun 7 17:29:41 peggy kernel: PCI: VIA IRQ fixup for 0000:00:0f.1, from
255 to 0
Jun 7 17:29:41 peggy kernel: VP_IDE: chipset revision 7
Jun 7 17:29:41 peggy kernel: VP_IDE: not 100%% native mode: will probe
irqs later
Jun 7 17:29:41 peggy kernel: VP_IDE: VIA vt8237a (rev 00) IDE UDMA133
controller on pci0000:00:0f.1
Jun 7 17:29:41 peggy kernel: ide0: BM-DMA at 0xe400-0xe407, BIOS
settings: hda:DMA, hdb:pio
Jun 7 17:29:41 peggy kernel: ide1: BM-DMA at 0xe408-0xe40f, BIOS
settings: hdc:pio, hdd:pio
Jun 7 17:29:41 peggy kernel: Probing IDE interface ide0...
Jun 7 17:29:41 peggy kernel: hda: DVD DC DW1670, ATAPI CD/DVD-ROM drive
Jun 7 17:29:41 peggy kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jun 7 17:29:41 peggy kernel: Probing IDE interface ide1...
Jun 7 17:29:41 peggy kernel: JMB363: IDE controller at PCI slot
0000:03:00.1
Jun 7 17:29:41 peggy kernel: PCI: Enabling device 0000:03:00.1 (0000 ->
0001)
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI
29 (level, low) -> IRQ 201
Jun 7 17:29:41 peggy kernel: JMB363: chipset revision 2
Jun 7 17:29:41 peggy kernel: JMB363: 100%% native mode on irq 201
Jun 7 17:29:41 peggy kernel: PCI: Setting latency timer of device
0000:03:00.1 to 64
Jun 7 17:29:41 peggy kernel: ide2: BM-DMA at 0xbc00-0xbc07, BIOS
settings: hde:pio, hdf:pio
Jun 7 17:29:41 peggy kernel: ide3: BM-DMA at 0xbc08-0xbc0f, BIOS
settings: hdg:pio, hdh:pio
Jun 7 17:29:41 peggy kernel: Probing IDE interface ide2...
Jun 7 17:29:41 peggy kernel: Probing IDE interface ide3...
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI
21 (level, low) -> IRQ 193
Jun 7 17:29:41 peggy kernel: PCI: VIA IRQ fixup for 0000:00:10.4, from
3 to 1
Jun 7 17:29:41 peggy kernel: ehci_hcd 0000:00:10.4: EHCI Host
Controller
Jun 7 17:29:41 peggy kernel: ehci_hcd 0000:00:10.4: new USB bus
registered, assigned bus number 1
Jun 7 17:29:41 peggy kernel: ehci_hcd 0000:00:10.4: irq 193, io mem
0xdffff000
Jun 7 17:29:41 peggy kernel: ehci_hcd 0000:00:10.4: USB 2.0 started,
EHCI 1.00, driver 10 Dec 2004
Jun 7 17:29:41 peggy kernel: usb usb1: configuration #1 chosen from 1
choice
Jun 7 17:29:41 peggy kernel: hub 1-0:1.0: USB hub found
Jun 7 17:29:41 peggy kernel: hub 1-0:1.0: 8 ports detected
Jun 7 17:29:41 peggy kernel: SCSI device sda: 156301488 512-byte hdwr
sectors (80026 MB)
Jun 7 17:29:41 peggy kernel: sda: Write Protect is off
Jun 7 17:29:41 peggy kernel: sda: Mode Sense: 00 3a 00 00
Jun 7 17:29:41 peggy kernel: SCSI device sda: drive cache: write back
Jun 7 17:29:41 peggy kernel: SCSI device sda: 156301488 512-byte hdwr
sectors (80026 MB)
Jun 7 17:29:41 peggy kernel: sda: Write Protect is off
Jun 7 17:29:41 peggy kernel: sda: Mode Sense: 00 3a 00 00
Jun 7 17:29:41 peggy kernel: SCSI device sda: drive cache: write back
Jun 7 17:29:41 peggy kernel: sda: sda1 sda2 sda3 sda4 <<6>hda: ATAPI
48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jun 7 17:29:41 peggy kernel: Uniform CD-ROM driver Revision: 3.20
Jun 7 17:29:41 peggy kernel: sda5 sda6 >
Jun 7 17:29:41 peggy kernel: sd 0:0:0:0: Attached scsi disk sda
Jun 7 17:29:41 peggy kernel: SCSI device sdb: 156301488 512-byte hdwr
sectors (80026 MB)
Jun 7 17:29:41 peggy kernel: sdb: Write Protect is off
Jun 7 17:29:41 peggy kernel: sdb: Mode Sense: 00 3a 00 00
Jun 7 17:29:41 peggy kernel: SCSI device sdb: drive cache: write back
Jun 7 17:29:41 peggy kernel: SCSI device sdb: 156301488 512-byte hdwr
sectors (80026 MB)
Jun 7 17:29:41 peggy kernel: sdb: Write Protect is off
Jun 7 17:29:41 peggy kernel: sdb: Mode Sense: 00 3a 00 00
Jun 7 17:29:41 peggy kernel: SCSI device sdb: drive cache: write back
Jun 7 17:29:41 peggy kernel: sdb: sdb1 sdb2 sdb3 sdb4 < sdb5<7>ahci
0000:03:00.0: version 2.0
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI
28 (level, low) -> IRQ 209
Jun 7 17:29:41 peggy kernel: sdb6 >
Jun 7 17:29:41 peggy kernel: sd 1:0:0:0: Attached scsi disk sdb
Jun 7 17:29:41 peggy kernel: PCI: Setting latency timer of device
0000:03:00.0 to 64
Jun 7 17:29:41 peggy kernel: ahci 0000:03:00.0: AHCI 0001.0000 32 slots
2 ports 3 Gbps 0x3 impl SATA mode
Jun 7 17:29:41 peggy kernel: ahci 0000:03:00.0: flags: 64bit ncq pm led
clo pmp pio slum part
Jun 7 17:29:41 peggy kernel: ata3: SATA max UDMA/133 cmd 0xF88E8100 ctl
0x0 bmdma 0x0 irq 209
Jun 7 17:29:41 peggy kernel: ata4: SATA max UDMA/133 cmd 0xF88E8180 ctl
0x0 bmdma 0x0 irq 209
Jun 7 17:29:41 peggy kernel: scsi2 : ahci
Jun 7 17:29:41 peggy kernel: ata3: SATA link down (SStatus 0 SControl
300)
Jun 7 17:29:41 peggy kernel: scsi3 : ahci
Jun 7 17:29:41 peggy kernel: ata4: SATA link down (SStatus 0 SControl
300)
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI
20 (level, low) -> IRQ 217
Jun 7 17:29:41 peggy kernel: PCI: VIA IRQ fixup for 0000:00:10.0, from
10 to 9
Jun 7 17:29:41 peggy kernel: uhci_hcd 0000:00:10.0: UHCI Host
Controller
Jun 7 17:29:41 peggy kernel: uhci_hcd 0000:00:10.0: new USB bus
registered, assigned bus number 2
Jun 7 17:29:41 peggy kernel: uhci_hcd 0000:00:10.0: irq 217, io base
0x0000e000
Jun 7 17:29:41 peggy kernel: usb usb2: configuration #1 chosen from 1
choice
Jun 7 17:29:41 peggy kernel: hub 2-0:1.0: USB hub found
Jun 7 17:29:41 peggy kernel: hub 2-0:1.0: 2 ports detected
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI
22 (level, low) -> IRQ 225
Jun 7 17:29:41 peggy kernel: PCI: VIA IRQ fixup for 0000:00:10.1, from
5 to 1
Jun 7 17:29:41 peggy kernel: uhci_hcd 0000:00:10.1: UHCI Host
Controller
Jun 7 17:29:41 peggy kernel: uhci_hcd 0000:00:10.1: new USB bus
registered, assigned bus number 3
Jun 7 17:29:41 peggy kernel: uhci_hcd 0000:00:10.1: irq 225, io base
0x0000dc00
Jun 7 17:29:41 peggy kernel: usb usb3: configuration #1 chosen from 1
choice
Jun 7 17:29:41 peggy kernel: hub 3-0:1.0: USB hub found
Jun 7 17:29:41 peggy kernel: hub 3-0:1.0: 2 ports detected
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI
21 (level, low) -> IRQ 193
Jun 7 17:29:41 peggy kernel: PCI: VIA IRQ fixup for 0000:00:10.2, from
3 to 1
Jun 7 17:29:41 peggy kernel: uhci_hcd 0000:00:10.2: UHCI Host
Controller
Jun 7 17:29:41 peggy kernel: uhci_hcd 0000:00:10.2: new USB bus
registered, assigned bus number 4
Jun 7 17:29:41 peggy kernel: uhci_hcd 0000:00:10.2: irq 193, io base
0x0000d800
Jun 7 17:29:41 peggy kernel: usb usb4: configuration #1 chosen from 1
choice
Jun 7 17:29:41 peggy kernel: hub 4-0:1.0: USB hub found
Jun 7 17:29:41 peggy kernel: hub 4-0:1.0: 2 ports detected
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI
23 (level, low) -> IRQ 233
Jun 7 17:29:41 peggy kernel: PCI: VIA IRQ fixup for 0000:00:10.3, from
6 to 9
Jun 7 17:29:41 peggy kernel: uhci_hcd 0000:00:10.3: UHCI Host
Controller
Jun 7 17:29:41 peggy kernel: uhci_hcd 0000:00:10.3: new USB bus
registered, assigned bus number 5
Jun 7 17:29:41 peggy kernel: uhci_hcd 0000:00:10.3: irq 233, io base
0x0000d400
Jun 7 17:29:41 peggy kernel: usb usb5: configuration #1 chosen from 1
choice
Jun 7 17:29:41 peggy kernel: hub 5-0:1.0: USB hub found
Jun 7 17:29:41 peggy kernel: hub 5-0:1.0: 2 ports detected
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI
23 (level, low) -> IRQ 233
Jun 7 17:29:41 peggy kernel: eth0: VIA Rhine II at 0x1d000,
00:1a:92:01:09:68, IRQ 233.
Jun 7 17:29:41 peggy kernel: eth0: MII PHY found at address 1, status
0x786d advertising 01e1 Link 45e1.
Jun 7 17:29:41 peggy kernel: Probing IDE interface ide1...
Jun 7 17:29:41 peggy kernel: Probing IDE interface ide2...
Jun 7 17:29:41 peggy kernel: Probing IDE interface ide3...
Jun 7 17:29:41 peggy kernel: md: md driver 0.90.3 MAX_MD_DEVS=256,
MD_SB_DISKS=27
Jun 7 17:29:41 peggy kernel: md: bitmap version 4.39
Jun 7 17:29:41 peggy kernel: md: raid1 personality registered for level
1
Jun 7 17:29:41 peggy kernel: md: md0 stopped.
Jun 7 17:29:41 peggy kernel: md: bind<sdb1>
Jun 7 17:29:41 peggy kernel: md: bind<sda1>
Jun 7 17:29:41 peggy kernel: raid1: raid set md0 active with 2 out of 2
mirrors
Jun 7 17:29:41 peggy kernel: md: md1 stopped.
Jun 7 17:29:41 peggy kernel: md: bind<sdb2>
Jun 7 17:29:41 peggy kernel: md: bind<sda2>
Jun 7 17:29:41 peggy kernel: raid1: raid set md1 active with 2 out of 2
mirrors
Jun 7 17:29:41 peggy kernel: md: md2 stopped.
Jun 7 17:29:41 peggy kernel: md: bind<sdb3>
Jun 7 17:29:41 peggy kernel: md: bind<sda3>
Jun 7 17:29:41 peggy kernel: raid1: raid set md2 active with 2 out of 2
mirrors
Jun 7 17:29:41 peggy kernel: md: md3 stopped.
Jun 7 17:29:41 peggy kernel: md: bind<sdb5>
Jun 7 17:29:41 peggy kernel: md: bind<sda5>
Jun 7 17:29:41 peggy kernel: raid1: raid set md3 active with 2 out of 2
mirrors
Jun 7 17:29:41 peggy kernel: Attempting manual resume
Jun 7 17:29:41 peggy kernel: kjournald starting. Commit interval 5
seconds
Jun 7 17:29:41 peggy kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Jun 7 17:29:41 peggy kernel: input: PC Speaker as /class/input/input1
Jun 7 17:29:41 peggy kernel: Real Time Clock Driver v1.12ac
Jun 7 17:29:41 peggy kernel: pci_hotplug: PCI Hot Plug PCI Core
version: 0.5
Jun 7 17:29:41 peggy kernel: shpchp: Standard Hot Plug PCI Controller
Driver version: 0.4
Jun 7 17:29:41 peggy kernel: parport: PnPBIOS parport detected.
Jun 7 17:29:41 peggy kernel: parport0: PC-style at 0x378 (0x778), irq
7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Jun 7 17:29:41 peggy kernel: ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI
17 (level, low) -> IRQ 50
Jun 7 17:29:41 peggy kernel: PCI: Setting latency timer of device
0000:80:01.0 to 64
Jun 7 17:29:41 peggy kernel: Adding 1734980k swap on /dev/sda6.
Priority:-1 extents:1 across:1734980k
Jun 7 17:29:41 peggy kernel: Adding 1734980k swap on /dev/sdb6.
Priority:-2 extents:1 across:1734980k
Jun 7 17:29:41 peggy kernel: EXT3 FS on md1, internal journal
Jun 7 17:29:41 peggy kernel: loop: loaded (max 8 devices)
Jun 7 17:29:41 peggy kernel: device-mapper: ioctl: 4.7.0-ioctl
(2006-06-24) initialised: dm-devel@redhat.com
Jun 7 17:29:41 peggy kernel: kjournald starting. Commit interval 5
seconds
Jun 7 17:29:41 peggy kernel: EXT3 FS on md0, internal journal
Jun 7 17:29:41 peggy kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Jun 7 17:29:41 peggy kernel: SGI XFS with ACLs, security attributes,
realtime, large block numbers, no debug enabled
Jun 7 17:29:41 peggy kernel: SGI XFS Quota Management subsystem
Jun 7 17:29:41 peggy kernel: Filesystem "md3": Disabling barriers, not
supported by the underlying device
Jun 7 17:29:41 peggy kernel: XFS mounting filesystem md3
Jun 7 17:29:41 peggy kernel: Starting XFS recovery on filesystem: md3
(logdev: internal)
Jun 7 17:29:41 peggy kernel: Ending XFS recovery on filesystem: md3
(logdev: internal)
Jun 7 17:29:41 peggy kernel: Filesystem "md2": Disabling barriers, not
supported by the underlying device
Jun 7 17:29:41 peggy kernel: XFS mounting filesystem md2
Jun 7 17:29:41 peggy kernel: Starting XFS recovery on filesystem: md2
(logdev: internal)
Jun 7 17:29:41 peggy kernel: Ending XFS recovery on filesystem: md2
(logdev: internal)
Jun 7 17:29:41 peggy kernel: eth0: link up, 100Mbps, full-duplex, lpa
0x45E1
Jun 7 17:29:41 peggy kernel: ACPI: Power Button (FF) [PWRF]
Jun 7 17:29:41 peggy kernel: ACPI: Power Button (CM) [PWRB]
Jun 7 17:29:41 peggy kernel: ACPI: Sleep Button (CM) [SLPB]
Jun 7 17:29:41 peggy kernel: lp0: using parport0 (interrupt-driven).
Jun 7 17:29:41 peggy kernel: ppdev: user-space parallel port driver
Jun 7 17:29:42 peggy kernel: NET: Registered protocol family 10
Jun 7 17:29:42 peggy kernel: lo: Disabled Privacy Extensions
Jun 7 17:29:42 peggy kernel: IPv6 over IPv4 tunneling driver
Jun 7 17:29:53 peggy kernel: eth0: no IPv6 routers present
Jun 7 17:34:14 peggy kernel: BUG: unable to handle kernel paging
request at virtual address 008a0018
Jun 7 17:34:14 peggy kernel: printing eip:
Jun 7 17:34:14 peggy kernel: c01b8b57
Jun 7 17:34:14 peggy kernel: *pde = 00000000
Jun 7 17:34:14 peggy kernel: Oops: 0000 [#1]
Jun 7 17:34:14 peggy kernel: SMP
Jun 7 17:34:14 peggy kernel: Modules linked in: ipv6 ppdev lp button ac
battery xfs dm_snapshot dm_mirror dm_mod loop snd_hda_intel
snd_hda_codec serio_raw snd_pcm parport_pc psmouse parport i2c_viapro
i2c_core shpchp pci_hotplug snd_timer snd soundcore snd_page_alloc evdev
rtc pcspkr ext3 jbd mbcache raid1 md_mod ide_generic jmicron ide_cd
cdrom sd_mod generic via_rhine mii ehci_hcd uhci_hcd ahci via82cxxx
usbcore sata_via ide_core libata scsi_mod thermal processor fan
Jun 7 17:34:14 peggy kernel: CPU: 0
Jun 7 17:34:14 peggy kernel: EIP: 0060:[<c01b8b57>] Not tainted
VLI
Jun 7 17:34:14 peggy kernel: EFLAGS: 00010002 (2.6.18-4-686 #1)
Jun 7 17:34:14 peggy kernel: EIP is at radix_tree_lookup+0x27/0x50
Jun 7 17:34:14 peggy kernel: eax: 008a0018 ebx: 008a0000 ecx:
00000206 edx: 00000006
Jun 7 17:34:14 peggy kernel: esi: 00abb16d edi: 00000001 ebp:
00abb16d esp: f7a65be8
Jun 7 17:34:14 peggy kernel: ds: 007b es: 007b ss: 0068
Jun 7 17:34:14 peggy kernel: Process rsync (pid: 2660, ti=f7a64000
task=dffaeaa0 task.ti=f7a64000)
Jun 7 17:34:14 peggy kernel: Stack: 00000000 00000000 dfcd5818 c0141803
00000000 00000000 00000250 00000000
Jun 7 17:34:14 peggy kernel: c0143ad4 00abb16d dfcd5818 c02cdbc0
0000000a 00000000 00000000 dfb3a880
Jun 7 17:34:14 peggy kernel: f8cb5b69 ffffffff 055d8b68 00000000
00000000 00002000 00abb16d 00000002
Jun 7 17:34:14 peggy kernel: Call Trace:
Jun 7 17:34:14 peggy kernel: [<c0141803>] find_lock_page+0x1a/0x77
Jun 7 17:34:14 peggy kernel: [<c0143ad4>] find_or_create_page
+0x2f/0x8c
Jun 7 17:34:14 peggy kernel: [<f8cb5b69>] xfs_buf_get_flags
+0x128/0x3bd [xfs]
Jun 7 17:34:14 peggy kernel: [<f8cb5e11>] xfs_buf_read_flags+0x13/0x77
[xfs]
Jun 7 17:34:14 peggy kernel: [<f8ca9791>] xfs_trans_read_buf
+0x3a/0x2bf [xfs]
Jun 7 17:34:14 peggy kernel: [<f8c963ba>] xfs_itobp+0x101/0x1b9 [xfs]
Jun 7 17:34:14 peggy kernel: [<f8c988a5>] xfs_iread+0x58/0x653 [xfs]
Jun 7 17:34:14 peggy kernel: [<f8cb2e15>] kmem_zone_alloc+0x4d/0x91
[xfs]
Jun 7 17:34:14 peggy kernel: [<f8cbb37e>] xfs_fs_alloc_inode+0xf/0x1b
[xfs]
Jun 7 17:34:14 peggy kernel: [<c016eda7>] alloc_inode+0xf2/0x17a
Jun 7 17:34:14 peggy kernel: [<f8c9425b>] xfs_iget+0x236/0x649 [xfs]
Jun 7 17:34:14 peggy kernel: [<f8caa47e>] xfs_dir_lookup_int+0x4f/0xa6
[xfs]
Jun 7 17:34:14 peggy kernel: [<f8cada00>] xfs_lookup+0x4c/0x73 [xfs]
Jun 7 17:34:14 peggy kernel: [<f8cb907f>] xfs_vn_lookup+0x28/0x5d
[xfs]
Jun 7 17:34:14 peggy kernel: [<c016537c>] do_lookup+0xa3/0x135
Jun 7 17:34:14 peggy kernel: [<c0166f45>] __link_path_walk+0x865/0xd1d
Jun 7 17:34:14 peggy kernel: [<c01b74c6>] _atomic_dec_and_lock
+0x2a/0x44
Jun 7 17:34:14 peggy kernel: [<c0167446>] link_path_walk+0x49/0xbd
Jun 7 17:34:14 peggy kernel: [<c016780f>] do_path_lookup+0x20a/0x225
Jun 7 17:34:14 peggy kernel: [<c0167f46>] __user_walk_fd+0x29/0x3f
Jun 7 17:34:14 peggy kernel: [<c0161e04>] vfs_lstat_fd+0x12/0x39
Jun 7 17:34:14 peggy kernel: [<c0161e70>] sys_lstat64+0xf/0x23
Jun 7 17:34:14 peggy kernel: [<c0102c11>] sysenter_past_esp+0x56/0x79
Jun 7 17:34:14 peggy kernel: Code: 5f c3 90 90 57 56 89 d6 53 8b 38 3b
14 bd f8 26 31 c0 77 3a 85 ff 75 0b 83 78 08 00 74 05 83 c0 08 eb 23 6b
d7 06 83 c0 08 eb 17 <8b> 18 83 ea 06 85 db 74 1a 89 f0 88 d1 d3 e8 4f
83 e0 3f 8d 44
Jun 7 17:34:14 peggy kernel: EIP: [<c01b8b57>] radix_tree_lookup
+0x27/0x50 SS:ESP 0068:f7a65be8
Jun 7 20:42:33 peggy kernel: klogd 1.4.1#18, log source = /proc/kmsg
started.
Jun 7 20:42:33 peggy kernel: Linux version 2.6.18-4-686 (Debian
2.6.18.dfsg.1-12etch2) (dannf@debian.org) (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) #1 SMP Wed May 9 23:03:12 UTC 2007
complete dmesg:
> Linux version 2.6.18-4-686 (Debian 2.6.18.dfsg.1-12etch2) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Wed May 9 23:03:12 UTC 2007
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003bee0000 (usable)
> BIOS-e820: 000000003bee0000 - 000000003bee3000 (ACPI NVS)
> BIOS-e820: 000000003bee3000 - 000000003bef0000 (ACPI data)
> BIOS-e820: 000000003bef0000 - 000000003bf00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> 62MB HIGHMEM available.
> 896MB LOWMEM available.
> found SMP MP-table at 000f5620
> On node 0 totalpages: 245472
> DMA zone: 4096 pages, LIFO batch:0
> Normal zone: 225280 pages, LIFO batch:31
> HighMem zone: 16096 pages, LIFO batch:3
> DMI 2.3 present.
> ACPI: RSDP (v002 AWARD ) @ 0x000f7540
> ACPI: XSDT (v001 AWARD ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3bee30c0
> ACPI: FADT (v003 AWARD ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3beea9c0
> ACPI: MCFG (v001 AWARD ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3beeac00
> ACPI: MADT (v001 AWARD ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x3beeab00
> ACPI: DSDT (v001 AWARD ASUSACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
> ACPI: PM-Timer IO Port: 0x408
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 15:4 APIC version 20
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> Processor #1 15:4 APIC version 20
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
> IOAPIC[1]: apic_id 5, version 3, address 0xfecc0000, GSI 24-47
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Enabling APIC mode: Flat. Using 2 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 40000000 (gap: 3bf00000:a4100000)
> Detected 3059.337 MHz processor.
> Built 1 zonelists. Total pages: 245472
> Kernel command line: root=/dev/md1 ro
> mapped APIC to ffffd000 (fee00000)
> mapped IOAPIC to ffffc000 (fec00000)
> mapped IOAPIC to ffffb000 (fecc0000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 965488k/981888k available (1544k kernel code, 15808k reserved, 577k data, 196k init, 64384k highmem)
> Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Calibrating delay using timer specific routine.. 6125.41 BogoMIPS (lpj=12250839)
> Security Framework v1.0.0 initialized
> SELinux: Disabled at boot.
> Capability LSM initialized
> Mount-cache hash table entries: 512
> CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
> CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
> monitor/mwait feature present.
> using mwait in idle threads.
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000651d 00000000 00000001
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
> CPU0: Thermal monitoring enabled
> Compat vDSO mapped to ffffe000.
> Checking 'hlt' instruction... OK.
> SMP alternatives: switching to UP code
> ACPI: Core revision 20060707
> CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
> SMP alternatives: switching to SMP code
> Booting processor 1/1 eip 3000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 6118.45 BogoMIPS (lpj=12236912)
> CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
> CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
> monitor/mwait feature present.
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000651d 00000000 00000001
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#1.
> CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
> CPU1: Thermal monitoring enabled
> CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
> Total of 2 processors activated (12243.87 BogoMIPS).
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> checking TSC synchronization across 2 CPUs: passed.
> Brought up 2 CPUs
> migration_cost=160
> checking if image is initramfs... it is
> Freeing initrd memory: 4613k freed
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: Using MMCONFIG
> Setting up standard PCI resources
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> Boot video device is 0000:01:00.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
> ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *6 7 10 11 12)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
> ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
> ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
> ACPI: PCI Root Bridge [PCI1] (0000:80)
> PCI: Probing PCI hardware (bus 80)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 14 devices
> PnPBIOS: Disabled by ACPI PNP
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> pnp: 00:01: ioport range 0x400-0x47f could not be reserved
> pnp: 00:01: ioport range 0x500-0x50f has been reserved
> PCI: Bridge: 0000:00:01.0
> IO window: disabled.
> MEM window: dd000000-deffffff
> PREFETCH window: d8000000-dbffffff
> PCI: Bridge: 0000:00:03.0
> IO window: b000-cfff
> MEM window: dfe00000-dfefffff
> PREFETCH window: disabled.
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> audit: initializing netlink socket (disabled)
> audit(1181248937.120:1): initialized
> highmem bounce pool size: 64 pages
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Initializing Cryptographic API
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:03.0:pcie00]
> Allocate Port Service[0000:00:03.0:pcie01]
> Allocate Port Service[0000:00:03.0:pcie02]
> Allocate Port Service[0000:00:03.0:pcie03]
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> PNP: PS/2 controller doesn't have AUX irq; using default 12
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> mice: PS/2 mouse device common for all mice
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> NET: Registered protocol family 8
> NET: Registered protocol family 20
> Starting balanced_irq
> Using IPI No-Shortcut mode
> ACPI: (supports S0 S1 S3 S4 S5)
> Freeing unused kernel memory: 196k freed
> Time: tsc clocksource has been installed.
> input: AT Translated Set 2 keyboard as /class/input/input0
> ACPI: Fan [FAN] (on)
> ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
> ACPI: Getting cpuindex for acpiid 0x2
> ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
> ACPI: Getting cpuindex for acpiid 0x3
> ACPI: Thermal Zone [THRM] (40 C)
> SCSI subsystem initialized
> libata version 2.00 loaded.
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: IDE controller at PCI slot 0000:00:0f.1
> PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 0
> VP_IDE: chipset revision 7
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
> ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:pio, hdd:pio
> Probing IDE interface ide0...
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> USB Universal Host Controller Interface driver v3.0
> via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
> hda: DVD DC DW1670, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 193
> PCI: VIA IRQ fixup for 0000:00:10.4, from 3 to 1
> ehci_hcd 0000:00:10.4: EHCI Host Controller
> ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:10.4: irq 193, io mem 0xdffff000
> ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> sata_via 0000:00:0f.0: version 2.0
> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 193
> sata_via 0000:00:0f.0: routed to hard irq line 11
> ata1: SATA max UDMA/133 cmd 0xFC00 ctl 0xF802 bmdma 0xEC00 irq 193
> ata2: SATA max UDMA/133 cmd 0xF400 ctl 0xF002 bmdma 0xEC08 irq 193
> scsi0 : sata_via
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32)
> ata1.00: ata1: dev 0 multi count 16
> ata1.00: configured for UDMA/133
> scsi1 : sata_via
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata2.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32)
> ata2.00: ata2: dev 0 multi count 16
> ata2.00: configured for UDMA/133
> Vendor: ATA Model: ST380811AS Rev: 3.AA
> Type: Direct-Access ANSI SCSI revision: 05
> Vendor: ATA Model: ST380811AS Rev: 3.AA
> Type: Direct-Access ANSI SCSI revision: 05
> ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 201
> PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 9
> uhci_hcd 0000:00:10.0: UHCI Host Controller
> uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:10.0: irq 201, io base 0x0000e000
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 209
> PCI: VIA IRQ fixup for 0000:00:10.1, from 5 to 1
> uhci_hcd 0000:00:10.1: UHCI Host Controller
> uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:10.1: irq 209, io base 0x0000dc00
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 193
> PCI: VIA IRQ fixup for 0000:00:10.2, from 3 to 1
> uhci_hcd 0000:00:10.2: UHCI Host Controller
> uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:10.2: irq 193, io base 0x0000d800
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 217
> PCI: VIA IRQ fixup for 0000:00:10.3, from 6 to 9
> uhci_hcd 0000:00:10.3: UHCI Host Controller
> uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:10.3: irq 217, io base 0x0000d400
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> ahci 0000:03:00.0: version 2.0
> ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 28 (level, low) -> IRQ 225
> PCI: Setting latency timer of device 0000:03:00.0 to 64
> ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
> ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
> ata3: SATA max UDMA/133 cmd 0xF8854100 ctl 0x0 bmdma 0x0 irq 225
> ata4: SATA max UDMA/133 cmd 0xF8854180 ctl 0x0 bmdma 0x0 irq 225
> scsi2 : ahci
> ata3: SATA link down (SStatus 0 SControl 300)
> scsi3 : ahci
> ata4: SATA link down (SStatus 0 SControl 300)
> JMB363: IDE controller at PCI slot 0000:03:00.1
> PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
> ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 29 (level, low) -> IRQ 233
> JMB363: chipset revision 2
> JMB363: 100% native mode on irq 233
> PCI: Setting latency timer of device 0000:03:00.1 to 64
> ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio, hdf:pio
> ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:pio, hdh:pio
> Probing IDE interface ide2...
> Probing IDE interface ide3...
> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 217
> eth0: VIA Rhine II at 0x1d000, 00:1a:92:01:09:68, IRQ 217.
> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
> SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back
> SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back
> sda:<6>hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> sda1 sda2 sda3 sda4 < sda5 sda6 >
> sd 0:0:0:0: Attached scsi disk sda
> SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 00 3a 00 00
> SCSI device sdb: drive cache: write back
> SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 00 3a 00 00
> SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
> sd 1:0:0:0: Attached scsi disk sdb
> Probing IDE interface ide1...
> Probing IDE interface ide2...
> Probing IDE interface ide3...
> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 4.39
> md: raid1 personality registered for level 1
> md: md0 stopped.
> md: bind<sdb1>
> md: bind<sda1>
> raid1: raid set md0 active with 2 out of 2 mirrors
> md: md1 stopped.
> md: bind<sdb2>
> md: bind<sda2>
> raid1: raid set md1 active with 2 out of 2 mirrors
> md: md2 stopped.
> md: bind<sdb3>
> md: bind<sda3>
> raid1: raid set md2 active with 2 out of 2 mirrors
> md: md3 stopped.
> md: bind<sdb5>
> md: bind<sda5>
> raid1: raid set md3 active with 2 out of 2 mirrors
> Attempting manual resume
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> input: PC Speaker as /class/input/input1
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> Real Time Clock Driver v1.12ac
> parport: PnPBIOS parport detected.
> parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 50
> PCI: Setting latency timer of device 0000:80:01.0 to 64
> Adding 1734980k swap on /dev/sda6. Priority:-1 extents:1 across:1734980k
> Adding 1734980k swap on /dev/sdb6. Priority:-2 extents:1 across:1734980k
> EXT3 FS on md1, internal journal
> loop: loaded (max 8 devices)
> device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on md0, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
> SGI XFS Quota Management subsystem
> Filesystem "md2": Disabling barriers, not supported by the underlying device
> XFS mounting filesystem md2
> Ending clean XFS mount for filesystem: md2
> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
> ACPI: Power Button (FF) [PWRF]
> ACPI: Power Button (CM) [PWRB]
> ACPI: Sleep Button (CM) [SLPB]
> lp0: using parport0 (interrupt-driven).
> ppdev: user-space parallel port driver
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> IPv6 over IPv4 tunneling driver
> eth0: no IPv6 routers present
> Filesystem "md3": Disabling barriers, not supported by the underlying device
> XFS mounting filesystem md3
> Ending clean XFS mount for filesystem: md3
/Henrik
Reply to: