[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#426738: linux-image-2.6.21-1-686: soft lockups on SMP, and local_softirq_pending storm as well



Package: linux-image-2.6.21-1-686
Version: 2.6.21-4
Followup-For: Bug #426738


	Here are my softlockups as seen in /var/log/dmesg on this system :

hda: cache flushes supported
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
BUG: soft lockup detected on CPU#0!
 [<c014aad3>] softlockup_tick+0xa6/0xb5
 [<c012a05b>] update_process_times+0x3b/0x5e
 [<c0138d60>] tick_sched_timer+0x78/0xbb
 [<c01358e0>] hrtimer_interrupt+0x131/0x1bd
 [<c0138ce8>] tick_sched_timer+0x0/0xbb
 [<c0114bbd>] smp_apic_timer_interrupt+0x6c/0x7d
 [<c0114bc2>] smp_apic_timer_interrupt+0x71/0x7d
 [<c010481c>] apic_timer_interrupt+0x28/0x30
 [<e08fc4bf>] ide_inb+0x3/0x7 [ide_core]
 [<e08fd523>] ide_wait_stat+0xb7/0x11e [ide_core]
 [<e08fb6a5>] ide_do_request+0x40b/0x8fa [ide_core]
 [<c01bcc2b>] elv_drain_elevator+0x15/0x58
 [<c01bd2d1>] elv_insert+0x67/0x146
 [<c01bcab1>] elv_queue_empty+0x1d/0x1e
 [<e08fb327>] ide_do_request+0x8d/0x8fa [ide_core]
 [<e08fbc48>] ide_do_drive_cmd+0xb4/0xf8 [ide_core]
 [<e08e533b>] cdrom_queue_packet_command+0x35/0xba [ide_cd]
 [<c01beed9>] __blk_put_request+0x24/0x75
 [<c01bf128>] blk_put_request+0x22/0x36
 [<e08e5657>] cdrom_check_status+0x55/0x60 [ide_cd]
 [<c01bf0e3>] blk_end_sync_rq+0x0/0x23
 [<e08e61eb>] cdrom_read_toc+0x67/0x401 [ide_cd]
 [<e08e7039>] idecd_revalidate_disk+0x10/0x16 [ide_cd]
 [<c01bf0e3>] blk_end_sync_rq+0x0/0x23
 [<c0168e57>] get_super+0x15/0x7c
 [<c018587c>] __invalidate_device+0x30/0x36
 [<c01858bf>] check_disk_change+0x3d/0x5c
 [<e08f423d>] cdrom_open+0x8da/0x91d [cdrom]
 [<c0152588>] __do_page_cache_readahead+0x8b/0x1fc
 [<c0175683>] __d_lookup+0x96/0xd9
 [<c016d0c4>] do_lookup+0x4f/0x140
 [<c0175a86>] dput+0x18/0x115
 [<c016eff2>] __link_path_walk+0xaec/0xc2d
 [<c0125ce0>] current_fs_time+0x41/0x46
 [<c0177ce0>] touch_atime+0x95/0xbd
 [<c01790a0>] mntput_no_expire+0x11/0x6a
 [<c016f1dc>] link_path_walk+0xa9/0xb3
 [<c0165c68>] get_unused_fd+0x4a/0xaa
 [<c01c89ec>] kobject_get+0xf/0x13
 [<c01c26c9>] get_disk+0x31/0x47
 [<c01c26e6>] exact_lock+0x7/0xd
 [<c0229760>] kobj_lookup+0xe6/0x110
 [<e08e60e1>] idecd_open+0x78/0x8c [ide_cd]
 [<c0185e56>] do_open+0x87/0x255
 [<c01861a9>] blkdev_open+0x0/0x4d
 [<c01861ce>] blkdev_open+0x25/0x4d
 [<c0165d8b>] __dentry_open+0xc3/0x17a
 [<c0165ebc>] nameidata_to_filp+0x24/0x33
 [<c0165efd>] do_filp_open+0x32/0x39
 [<c0165c68>] get_unused_fd+0x4a/0xaa
 [<c0165f46>] do_sys_open+0x42/0xc3
 [<c0166000>] sys_open+0x1c/0x1e
 [<c0103d8c>] syscall_call+0x7/0xb
 [<c0290000>] __find_acq_core+0x2ce/0x30e
 =======================
BUG: soft lockup detected on CPU#1!
 [<c014aad3>] softlockup_tick+0xa6/0xb5
 [<c012a05b>] update_process_times+0x3b/0x5e
 [<c0138d60>] tick_sched_timer+0x78/0xbb
 [<c01358e0>] hrtimer_interrupt+0x131/0x1bd
 [<c0138ce8>] tick_sched_timer+0x0/0xbb
 [<c0114bbd>] smp_apic_timer_interrupt+0x6c/0x7d
 [<c010481c>] apic_timer_interrupt+0x28/0x30
 [<c016007b>] sys_swapon+0x465/0xa01
 [<c01c00d8>] blk_queue_make_request+0x9a/0xd0
 [<c029e729>] lock_kernel+0x1e/0x2c
 [<c01697ab>] chrdev_open+0x113/0x13b
 [<c0169698>] chrdev_open+0x0/0x13b
 [<c0165d8b>] __dentry_open+0xc3/0x17a
 [<c0165ebc>] nameidata_to_filp+0x24/0x33
 [<c0165efd>] do_filp_open+0x32/0x39
 [<c0165c68>] get_unused_fd+0x4a/0xaa
 [<c0165f46>] do_sys_open+0x42/0xc3
 [<c0166000>] sys_open+0x1c/0x1e
 [<c0103d8c>] syscall_call+0x7/0xb
 [<c0290000>] __find_acq_core+0x2ce/0x30e
 =======================
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
BUG: soft lockup detected on CPU#0!
 [<c014aad3>] softlockup_tick+0xa6/0xb5
 [<c012a05b>] update_process_times+0x3b/0x5e
 [<c0138d60>] tick_sched_timer+0x78/0xbb
 [<c01358e0>] hrtimer_interrupt+0x131/0x1bd
 [<c0138ce8>] tick_sched_timer+0x0/0xbb
 [<c0114bbd>] smp_apic_timer_interrupt+0x6c/0x7d
 [<c0114bc2>] smp_apic_timer_interrupt+0x71/0x7d
 [<c010481c>] apic_timer_interrupt+0x28/0x30
 [<c01400d8>] try_to_freeze_tasks+0xe4/0x275
 [<e08fc4bf>] ide_inb+0x3/0x7 [ide_core]
 [<e08fd1d5>] ide_config_drive_speed+0x106/0x31e [ide_core]
 [<e08577ef>] piix_tune_chipset+0x33c/0x344 [piix]
 [<e085785d>] piix_config_drive_xfer_rate+0x2f/0x5d [piix]
 [<e090176e>] ide_set_dma+0xe/0x3e [ide_core]
 [<e08fa5cf>] set_using_dma+0x64/0xba [ide_core]
 [<e08f9ac7>] ide_write_setting+0x47/0xc2 [ide_core]
 [<e08fa6b6>] generic_ide_ioctl+0x91/0x44a [ide_core]
 [<c0175683>] __d_lookup+0x96/0xd9
 [<c013690e>] clocksource_get_next+0x39/0x3f
 [<c0129aac>] do_timer+0x4f6/0x6e1
 [<c016d0c4>] do_lookup+0x4f/0x140
 [<e08e600d>] idecd_ioctl+0x125/0x15b [ide_cd]
 [<c0128ef8>] getnstimeofday+0x30/0xb6
 [<c0114707>] lapic_next_event+0xd/0x10
 [<c0137c4e>] clockevents_program_event+0x9c/0xa3
 [<c0129324>] run_timer_softirq+0x37/0x190
 [<c01c14b2>] blkdev_driver_ioctl+0x4e/0x5e
 [<c01c1ae8>] blkdev_ioctl+0x626/0x672
 [<c012642a>] irq_exit+0x53/0x6b
 [<c0114bc2>] smp_apic_timer_interrupt+0x71/0x7d
 [<c010481c>] apic_timer_interrupt+0x28/0x30
 [<e08e6069>] idecd_open+0x0/0x8c [ide_cd]
 [<e08e60e1>] idecd_open+0x78/0x8c [ide_cd]
 [<c014cddc>] find_get_page+0x18/0x41
 [<c014f0bc>] filemap_nopage+0x18d/0x2ef
 [<c0157e37>] __handle_mm_fault+0x2ec/0x7d2
 [<c0102ff1>] __switch_to+0xfe/0x131
 [<c018580f>] block_ioctl+0x18/0x1b
 [<c01857f7>] block_ioctl+0x0/0x1b
 [<c0170ecb>] do_ioctl+0x1f/0x62
 [<c0171152>] vfs_ioctl+0x244/0x256
 [<c01711b0>] sys_ioctl+0x4c/0x64
 [<c0103d8c>] syscall_call+0x7/0xb
 =======================
hdc: set_drive_speed_status: status=0xd0 { Busy }
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: 0xef
hdc: drive not ready for command
hdc: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command

	tglx said it has something to do with SMP or HT. These lockups I observe
	on HT systems with 2 CPU cores. One system has two network interfaces,
	eth0 and ippp0, and after moving to 2.6.21 kernel its eth0 started from
	time to time to get lost and inaccessible from other our hosts.

	Here is a log from another system (where I don't have reportbug),
	there is no local_softirq_pending storm,
	but soft lockups are there, they just happened later after boot, 
	when the system decided to check RAID1 consistency :

md: data-check of RAID array md0
md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000
KB/sec) for data-check.
md: using 128k window, over a total of 191350144 blocks.
BUG: soft lockup detected on CPU#1!
 [<c014aad3>] softlockup_tick+0xa6/0xb5
 [<c012a05b>] update_process_times+0x3b/0x5e
 [<c0138d60>] tick_sched_timer+0x78/0xbb
 [<c01358e0>] hrtimer_interrupt+0x131/0x1bd
 [<c0138ce8>] tick_sched_timer+0x0/0xbb
 [<c0114bbd>] smp_apic_timer_interrupt+0x6c/0x7d
 [<c010481c>] apic_timer_interrupt+0x28/0x30
 [<c01cac3e>] memcmp+0x10/0x22
 [<f8939da3>] raid1d+0x2b9/0xd0e [raid1]
 [<c0102ff1>] __switch_to+0xfe/0x131
 [<c010648b>] do_IRQ+0x5a/0x6f
 [<c029d6d9>] schedule_timeout+0x13/0x8d
 [<f89a5a71>] md_thread+0xc6/0xdd [md_mod]
 [<c01328e5>] autoremove_wake_function+0x0/0x35
 [<f89a59ab>] md_thread+0x0/0xdd [md_mod]
 [<c013281a>] kthread+0xb2/0xdc
 [<c0132768>] kthread+0x0/0xdc
 [<c01049a7>] kernel_thread_helper+0x7/0x10
 =======================
BUG: soft lockup detected on CPU#0!
 [<c014aad3>] softlockup_tick+0xa6/0xb5
 [<c012a05b>] update_process_times+0x3b/0x5e
 [<c0138d60>] tick_sched_timer+0x78/0xbb
 [<c01358e0>] hrtimer_interrupt+0x131/0x1bd
 [<c0138ce8>] tick_sched_timer+0x0/0xbb
 [<c0114bbd>] smp_apic_timer_interrupt+0x6c/0x7d
 [<c010481c>] apic_timer_interrupt+0x28/0x30
 [<c01cac49>] memcmp+0x1b/0x22
 [<f8939da3>] raid1d+0x2b9/0xd0e [raid1]
 [<c0102ff1>] __switch_to+0xfe/0x131
 [<c029d6d9>] schedule_timeout+0x13/0x8d
 [<c010481c>] apic_timer_interrupt+0x28/0x30
 [<f89a5a71>] md_thread+0xc6/0xdd [md_mod]
 [<c01328e5>] autoremove_wake_function+0x0/0x35
 [<f89a59ab>] md_thread+0x0/0xdd [md_mod]
 [<c013281a>] kthread+0xb2/0xdc
 [<c0132768>] kthread+0x0/0xdc
 [<c01049a7>] kernel_thread_helper+0x7/0x10
 =======================
BUG: soft lockup detected on CPU#0!
 [<c014aad3>] softlockup_tick+0xa6/0xb5
 [<c012a05b>] update_process_times+0x3b/0x5e
 [<c0138d60>] tick_sched_timer+0x78/0xbb
 [<c01358e0>] hrtimer_interrupt+0x131/0x1bd
 [<c0138ce8>] tick_sched_timer+0x0/0xbb
 [<c0114bbd>] smp_apic_timer_interrupt+0x6c/0x7d
 [<c010481c>] apic_timer_interrupt+0x28/0x30
 [<c01cac3b>] memcmp+0xd/0x22
 [<f8939da3>] raid1d+0x2b9/0xd0e [raid1]
 [<c0102ff1>] __switch_to+0xfe/0x131
 [<c029d6d9>] schedule_timeout+0x13/0x8d
 [<c010481c>] apic_timer_interrupt+0x28/0x30
 [<f89a5a71>] md_thread+0xc6/0xdd [md_mod]
 [<c01328e5>] autoremove_wake_function+0x0/0x35
 [<f89a59ab>] md_thread+0x0/0xdd [md_mod]
 [<c013281a>] kthread+0xb2/0xdc
 [<c0132768>] kthread+0x0/0xdc
 [<c01049a7>] kernel_thread_helper+0x7/0x10
 =======================
md: md0: data-check done.

	Here is also /proc/cpuinfo from this (first) system :

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Pentium(R) 4 CPU 2.40GHz
stepping        : 9
cpu MHz         : 300.000
cache size      : 512 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
	mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
xtpr
bogomips        : 4792.06
clflush size    : 64

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Pentium(R) 4 CPU 2.40GHz
stepping        : 9
cpu MHz         : 300.000
cache size      : 512 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
	mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
xtpr
bogomips        : 4788.35
clflush size    : 64

	and from another one :

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 4
model name      : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping        : 1
cpu MHz         : 375.000
cache size      : 1024 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
	mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
	constant_tsc pni monitor ds_cpl cid xtpr
bogomips        : 5990.55
clflush size    : 64

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 15
model           : 4
model name      : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping        : 1
cpu MHz         : 375.000
cache size      : 1024 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
	mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
	constant_tsc pni monitor ds_cpl cid xtpr
bogomips        : 5985.49
clflush size    : 64

	I remember tglx posted some patch on the LKML that helped
	someone, but don't remember if it was a final solution.

-- Package-specific info:
** Version: Linux version 2.6.21-1-686 (Debian 2.6.21-4) (waldi@debian.org) (gcc version 4.1.3 20070518 (prerelease) (Debian 4.1.2-8)) #1 SMP Sat May 26 16:14:59 UTC 2007

** Not tainted

** Kernel log:
NOHZ: local_softirq_pending 08
<lots, lots of these !>
NOHZ: local_softirq_pending 08

** Loaded modules:
Module                  Size  Used by
button                  7952  0 
ac                      5220  0 
battery                10020  0 
ipv6                  236320  36 
ipt_LOG                 6144  3 
xt_state                2432  3 
xt_multiport            3040  4 
iptable_filter          2944  1 
ipt_MASQUERADE          3616  1 
xt_tcpudp               3104  5 
iptable_nat             7236  1 
nf_nat                 17740  2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4      17612  5 iptable_nat
nf_conntrack           58472  5 xt_state,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
nfnetlink               6456  3 nf_nat,nf_conntrack_ipv4,nf_conntrack
ip_tables              12164  2 iptable_filter,iptable_nat
x_tables               14468  7 ipt_LOG,xt_state,xt_multiport,ipt_MASQUERADE,xt_tcpudp,iptable_nat,ip_tables
dm_snapshot            16420  0 
dm_mirror              20116  0 
eeprom                  7024  0 
lm85                   27876  0 
hwmon_vid               2848  1 lm85
i2c_isa                 5216  0 
cpufreq_userspace       4128  1 
p4_clockmod             5540  1 
speedstep_lib           4964  1 p4_clockmod
freq_table              4512  1 p4_clockmod
stv0299                 9672  1 
i810_audio             32980  0 
ac97_codec             15916  1 i810_audio
b2c2_flexcop_pci        8344  3 
b2c2_flexcop           25516  1 b2c2_flexcop_pci
hisax                 435776  4 
dvb_core               73640  2 stv0299,b2c2_flexcop
crc_ccitt               2144  1 hisax
firmware_class          9408  1 b2c2_flexcop
isdn                  123136  9 hisax
dvb_pll                14084  1 b2c2_flexcop
evdev                   9216  0 
slhc                    6048  1 isdn
intelfb                34564  1 
snd_intel8x0           32060  0 
psmouse                34952  0 
snd_ac97_codec         92356  1 snd_intel8x0
parport_pc             32740  0 
parport                33672  1 parport_pc
rtc_cmos                7860  0 
rtc_core               10148  1 rtc_cmos
pcspkr                  3136  0 
shpchp                 30996  0 
pci_hotplug            29088  1 shpchp
intel_agp              23004  1 
agpgart                32168  2 intelfb,intel_agp
rtc_lib                 3456  1 rtc_core
iTCO_wdt                9956  0 
i2c_i801                8560  0 
i2c_algo_bit            7272  1 intelfb
serio_raw               6564  0 
ac97_bus                2272  1 snd_ac97_codec
snd_pcm                71940  2 snd_intel8x0,snd_ac97_codec
snd_timer              20868  1 snd_pcm
snd                    48132  4 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore               7424  2 i810_audio,snd
snd_page_alloc          9512  2 snd_intel8x0,snd_pcm
i2c_core               20480  9 eeprom,lm85,i2c_isa,stv0299,b2c2_flexcop,dvb_pll,intelfb,i2c_i801,i2c_algo_bit
dm_mod                 52556  2 dm_snapshot,dm_mirror
ext3                  120904  1 
jbd                    55208  1 ext3
mbcache                 8164  1 ext3
ide_generic             1344  0 [permanent]
ide_cd                 36512  0 
cdrom                  32768  1 ide_cd
ide_disk               15648  3 
generic                 4804  0 [permanent]
piix                    9508  0 [permanent]
ide_core              115016  5 ide_generic,ide_cd,ide_disk,generic,piix
uhci_hcd               22608  0 
floppy                 54820  0 
ata_generic             8100  0 
e100                   32488  0 
mii                     5280  1 e100
ehci_hcd               30796  0 
ata_piix               13508  0 
libata                109172  2 ata_generic,ata_piix
scsi_mod              133740  1 libata
usbcore               123304  3 uhci_hcd,ehci_hcd
thermal                14120  0 
processor              30888  1 thermal
fan                     4868  0 

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
	Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: <access denied>

00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA])
	Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
	Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
	Region 2: I/O ports at ec00 [size=8]
	Capabilities: <access denied>

00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 19
	Region 4: I/O ports at c800 [size=32]

00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 20
	Region 4: I/O ports at cc00 [size=32]

00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 16
	Region 4: I/O ports at d000 [size=32]

00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 19
	Region 4: I/O ports at d400 [size=32]

00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin D routed to IRQ 18
	Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: ff800000-ff8fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at ffa0 [size=16]
	Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]

00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at e800 [size=8]
	Region 1: I/O ports at e400 [size=4]
	Region 2: I/O ports at e000 [size=8]
	Region 3: I/O ports at dc00 [size=4]
	Region 4: I/O ports at d800 [size=16]

00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
	Subsystem: Intel Corporation Desktop Board D865GLC [8086:4c43]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at c400 [size=32]

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
	Subsystem: Intel Corporation SoundMax Intergrated Digital Audio [8086:e002]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 2: Memory at ffa7f800 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at ffa7f400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>

01:01.0 Network controller [0280]: ASUSTeK Computer Inc. ISDNLink P-IN100-ST-D [1043:0675] (rev 02)
	Subsystem: Dynalink ISDN Adapter (PCI Bus, D, C) [0675:1704]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 16 (4000ns max)
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at bc00 [disabled] [size=8]
	Region 1: Memory at ff8ffc00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>

01:02.0 Network controller [0280]: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card [13d0:2103] (rev 02)
	Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card [13d0:2103]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at ff8e0000 (32-bit, non-prefetchable) [size=64K]
	Region 1: I/O ports at b800 [size=32]

01:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet Controller [8086:1050] (rev 01)
	Subsystem: Intel Corporation Unknown device [8086:303a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at ff8fe000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at b400 [size=64]
	Capabilities: <access denied>



-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.21-1-686 (SMP w/2 CPU cores)
Locale: LANG=uk_UA.UTF-8, LC_CTYPE=uk_UA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.21-1-686 depends on:
ii  initramfs-tools [linux-initr 0.88        tools for generating an initramfs
ii  module-init-tools            3.3-pre11-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.21-1-686 recommends:
ii  libc6-i686                    2.5-9+b1   GNU C Library: Shared libraries [i

-- debconf information:
  linux-image-2.6.21-1-686/postinst/kimage-is-a-directory:
  linux-image-2.6.21-1-686/preinst/lilo-initrd-2.6.21-1-686: true
  linux-image-2.6.21-1-686/preinst/elilo-initrd-2.6.21-1-686: true
  linux-image-2.6.21-1-686/preinst/abort-overwrite-2.6.21-1-686:
  linux-image-2.6.21-1-686/postinst/old-dir-initrd-link-2.6.21-1-686: true
  linux-image-2.6.21-1-686/postinst/bootloader-test-error-2.6.21-1-686:
  linux-image-2.6.21-1-686/preinst/already-running-this-2.6.21-1-686:
  linux-image-2.6.21-1-686/preinst/initrd-2.6.21-1-686:
  linux-image-2.6.21-1-686/postinst/create-kimage-link-2.6.21-1-686: true
  linux-image-2.6.21-1-686/preinst/overwriting-modules-2.6.21-1-686: true
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.21-1-686/prerm/removing-running-kernel-2.6.21-1-686: true
  linux-image-2.6.21-1-686/postinst/depmod-error-2.6.21-1-686: false
  linux-image-2.6.21-1-686/postinst/old-initrd-link-2.6.21-1-686: true
  linux-image-2.6.21-1-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.21-1-686/postinst/bootloader-error-2.6.21-1-686:
  linux-image-2.6.21-1-686/preinst/bootloader-initrd-2.6.21-1-686: true
  linux-image-2.6.21-1-686/prerm/would-invalidate-boot-loader-2.6.21-1-686: true
  linux-image-2.6.21-1-686/preinst/abort-install-2.6.21-1-686:
  linux-image-2.6.21-1-686/postinst/depmod-error-initrd-2.6.21-1-686: false
  linux-image-2.6.21-1-686/postinst/old-system-map-link-2.6.21-1-686: true
  linux-image-2.6.21-1-686/preinst/failed-to-move-modules-2.6.21-1-686:



Reply to: