linux-2.6_2.6.18.dfsg.1-13lenny1_i386.changes is NEW
(new) linux-headers-2.6.18-5-486_2.6.18.dfsg.1-13lenny1_i386.deb optional devel
Header files for Linux 2.6.18 on x86
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on x86 and compatible machines, generally used for
building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-5-486, and can be used for
building modules that load into the kernel provided by the
linux-image-2.6.18-5-486 package.
(new) linux-headers-2.6.18-5-686-bigmem_2.6.18.dfsg.1-13lenny1_i386.deb optional devel
Header files for Linux 2.6.18 on PPro/Celeron/PII/PIII/P4
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium
4 with 4-64G RAM machines, generally used for building out-of-tree kernel
modules. These files are going to be installed into
/usr/src/linux-headers-2.6.18-5-686-bigmem, and can be used for building
modules that load into the kernel provided by the
linux-image-2.6.18-5-686-bigmem package.
(new) linux-headers-2.6.18-5-686_2.6.18.dfsg.1-13lenny1_i386.deb optional devel
Header files for Linux 2.6.18 on PPro/Celeron/PII/PIII/P4
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium
4 machines, generally used for building out-of-tree kernel modules. These
files are going to be installed into /usr/src/linux-headers-2.6.18-5-686,
and can be used for building modules that load into the kernel provided by
the linux-image-2.6.18-5-686 package.
(new) linux-headers-2.6.18-5-all-i386_2.6.18.dfsg.1-13lenny1_i386.deb optional devel
All header files for Linux 2.6.18
This package depends against all architecture-specific kernel header files
for Linux kernel version 2.6.18, generally used for building out-of-tree
kernel modules.
linux-headers-2.6.18-5-all_2.6.18.dfsg.1-13lenny1_i386.deb
to pool/main/l/linux-2.6/linux-headers-2.6.18-5-all_2.6.18.dfsg.1-13lenny1_i386.deb
(new) linux-headers-2.6.18-5-amd64_2.6.18.dfsg.1-13lenny1_i386.deb optional devel
Header files for Linux 2.6.18 on AMD64
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on all 64bit single- and multiprocessor AMD and Intel
machines, generally used for building out-of-tree kernel modules. These
files are going to be installed into
/usr/src/linux-headers-2.6.18-5-amd64, and can be used for building
modules that load into the kernel provided by the
linux-image-2.6.18-5-amd64 package.
(new) linux-headers-2.6.18-5-k7_2.6.18.dfsg.1-13lenny1_i386.deb optional devel
Header files for Linux 2.6.18 on AMD K7
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on 32bit AMD Duron/Athlon/AthlonXP machines, generally
used for building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-5-k7, and can be used for
building modules that load into the kernel provided by the
linux-image-2.6.18-5-k7 package.
(new) linux-headers-2.6.18-5-vserver-686_2.6.18.dfsg.1-13lenny1_i386.deb optional devel
Header files for Linux 2.6.18 on PPro/Celeron/PII/PIII/P4
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium
4 machines, generally used for building out-of-tree kernel modules. These
files are going to be installed into
/usr/src/linux-headers-2.6.18-5-vserver-686, and can be used for building
modules that load into the kernel provided by the
linux-image-2.6.18-5-vserver-686 package.
(new) linux-headers-2.6.18-5-vserver-k7_2.6.18.dfsg.1-13lenny1_i386.deb optional devel
Header files for Linux 2.6.18 on AMD K7
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on 32bit AMD Duron/Athlon/AthlonXP machines, generally
used for building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-5-vserver-k7, and can be used
for building modules that load into the kernel provided by the
linux-image-2.6.18-5-vserver-k7 package.
linux-headers-2.6.18-5-vserver_2.6.18.dfsg.1-13lenny1_i386.deb
to pool/main/l/linux-2.6/linux-headers-2.6.18-5-vserver_2.6.18.dfsg.1-13lenny1_i386.deb
(new) linux-headers-2.6.18-5-xen-686_2.6.18.dfsg.1-13lenny1_i386.deb optional devel
Header files for Linux 2.6.18 on i686
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on i686 and compatible machines, generally used for
building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-5-xen-686, and can be used
for building modules that load into the kernel provided by the
linux-image-2.6.18-5-xen-686 package.
(new) linux-headers-2.6.18-5-xen-vserver-686_2.6.18.dfsg.1-13lenny1_i386.deb optional devel
Header files for Linux 2.6.18 on i686
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on i686 and compatible machines, generally used for
building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-5-xen-vserver-686, and can be
used for building modules that load into the kernel provided by the
linux-image-2.6.18-5-xen-vserver-686 package.
(new) linux-headers-2.6.18-5-xen-vserver_2.6.18.dfsg.1-13lenny1_i386.deb optional devel
Common header files for Linux 2.6.18
This package provides the (sub)architecture-specific common kernel header
files for Linux kernel version 2.6.18, generally used for building
out-of-tree kernel modules. To obtain a complete set of headers you also
need to install the linux-headers-2.6.18-5-(flavour) package, matching the
flavour of the kernel you intend the build for. To obtain such a set for
the currently running kernel it is sufficient to run a command
.
apt-get install linux-headers-$(uname -r)
.
and it will be unpacked in /usr/src/linux-headers-2.6.18-5-(flavour).
(new) linux-headers-2.6.18-5-xen_2.6.18.dfsg.1-13lenny1_i386.deb optional devel
Common header files for Linux 2.6.18
This package provides the (sub)architecture-specific common kernel header
files for Linux kernel version 2.6.18, generally used for building
out-of-tree kernel modules. To obtain a complete set of headers you also
need to install the linux-headers-2.6.18-5-(flavour) package, matching the
flavour of the kernel you intend the build for. To obtain such a set for
the currently running kernel it is sufficient to run a command
.
apt-get install linux-headers-$(uname -r)
.
and it will be unpacked in /usr/src/linux-headers-2.6.18-5-(flavour).
linux-headers-2.6.18-5_2.6.18.dfsg.1-13lenny1_i386.deb
to pool/main/l/linux-2.6/linux-headers-2.6.18-5_2.6.18.dfsg.1-13lenny1_i386.deb
(new) linux-image-2.6.18-5-486_2.6.18.dfsg.1-13lenny1_i386.deb optional admin
Linux 2.6.18 image on x86
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on x86 and compatible machines.
(new) linux-image-2.6.18-5-686-bigmem_2.6.18.dfsg.1-13lenny1_i386.deb optional admin
Linux 2.6.18 image on PPro/Celeron/PII/PIII/P4
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium
4 with 4-64G RAM machines.
(new) linux-image-2.6.18-5-686_2.6.18.dfsg.1-13lenny1_i386.deb optional admin
Linux 2.6.18 image on PPro/Celeron/PII/PIII/P4
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium
4 machines.
(new) linux-image-2.6.18-5-amd64_2.6.18.dfsg.1-13lenny1_i386.deb optional admin
Linux 2.6.18 image on AMD64
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on all 64bit single- and multiprocessor AMD and Intel
machines.
(new) linux-image-2.6.18-5-k7_2.6.18.dfsg.1-13lenny1_i386.deb optional admin
Linux 2.6.18 image on AMD K7
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on 32bit AMD Duron/Athlon/AthlonXP machines.
(new) linux-image-2.6.18-5-vserver-686_2.6.18.dfsg.1-13lenny1_i386.deb optional admin
Linux 2.6.18 image on PPro/Celeron/PII/PIII/P4
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium
4 machines.
(new) linux-image-2.6.18-5-vserver-k7_2.6.18.dfsg.1-13lenny1_i386.deb optional admin
Linux 2.6.18 image on AMD K7
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on 32bit AMD Duron/Athlon/AthlonXP machines.
(new) linux-image-2.6.18-5-xen-686_2.6.18.dfsg.1-13lenny1_i386.deb optional admin
Linux 2.6.18 image on i686
This package provides the binary image for Linux kernel 2.6.18 on i686 and
compatible machines.
(new) linux-image-2.6.18-5-xen-vserver-686_2.6.18.dfsg.1-13lenny1_i386.deb optional admin
Linux 2.6.18 image on i686
This package provides the binary image for Linux kernel 2.6.18 on i686 and
compatible machines.
(new) linux-modules-2.6.18-5-xen-686_2.6.18.dfsg.1-13lenny1_i386.deb optional admin
Linux 2.6.18 modules on i686
This package provides pre-built loadable modules for Linux kernel 2.6.18
on i686 and compatible machines.
(new) linux-modules-2.6.18-5-xen-vserver-686_2.6.18.dfsg.1-13lenny1_i386.deb optional admin
Linux 2.6.18 modules on i686
This package provides pre-built loadable modules for Linux kernel 2.6.18
on i686 and compatible machines.
(new) xen-linux-system-2.6.18-5-xen-686_2.6.18.dfsg.1-13lenny1_i386.deb extra admin
XEN system with Linux 2.6.18 image on i686
This package depends on the binary Linux image and the correct hypervisor.
(new) xen-linux-system-2.6.18-5-xen-vserver-686_2.6.18.dfsg.1-13lenny1_i386.deb extra admin
XEN system with Linux 2.6.18 image on i686
This package depends on the binary Linux image and the correct hypervisor.
Changes: linux-2.6 (2.6.18.dfsg.1-13lenny1) testing; urgency=high
.
[ Bastian Blank ]
* [vserver] Fix overflow in network accounting. (closes: #412132)
* [vserver] Fix lock accounting. (closes: #417631)
* Bump ABI to 5.
* Make modules packages binnmuable.
* [sparc] Enable Qlogic QLA SCSI support. (closes: #417629)
.
[ dann frazier ]
* bugfix/listxattr-mem-corruption.patch
[SECURITY] Fix userspace corruption vulnerability caused by
incorrectly promoted return values in bad_inode_ops
This patch changes the kernel ABI.
See CVE-2006-5753
* bugfix/all/vserver/net-mount-fix.patch
Fix mounting of network filesystems with VX_BINARY_MOUNT caps
(closes: #418076)
* Disable broken CONFIG_IP_ROUTE_MULTIPATH_CACHED setting. (closes: #418344)
* bugfix/ipv6-disallow-RH0-by-default.patch
[SECURITY] Avoid a remote DoS (network amplification between two routers)
by disabling type0 IPv6 route headers by default. Can be re-enabled via
a sysctl interface. Thanks to Vlad Yasevich for porting help.
This patch changes the kernel ABI.
See CVE-2007-2242
* Fix an oops which potentially results in data corruption in the gdth driver.
(closes: #412092)
* bugfix/amd64-make-gart-ptes-uncacheable.patch
Fix silent data corruption using GART iommu (closes: #404148)
.
[ maximilian attems ]
* Backport support for i965 to agp too. (closes: #406111)
* Compile fix for UML CONFIG_MODE_TT=y. (closes: #412957)
* Fix ide-generic jmicron device conflict. (closes: #421281)
.
[ Martin Michlmayr ]
* Fix wrong checksum for split TCP packets on 64-bit MIPS. (closes: #421283)
Override entries for your package:
linux-headers-2.6.18-5-all_2.6.18.dfsg.1-13lenny1_i386.deb - optional devel
linux-headers-2.6.18-5-vserver_2.6.18.dfsg.1-13lenny1_i386.deb - optional devel
linux-headers-2.6.18-5_2.6.18.dfsg.1-13lenny1_i386.deb - optional devel
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
Reply to: