--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: Uninstallable on HPPA
- From: Julien Louis <ptitlouis@sysif.net>
- Date: Sat, 28 Jan 2006 23:51:42 +0000
- Message-id: <20060128235142.GA10422@ptitlouis.dyndns.org>
Package: installation-reports
Version: 2.11
Severity: important
-- Package-specific info:
Boot method: CD
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/hppa/iso-cd/debian-testing-hppa-netinst.iso
Date: 28/01/2006
Machine: HP Visualize B2000
Partitions:
Disk /dev/sda: 9104 MB, 9104953344 bytes
255 heads, 63 sectors/track, 1106 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 4 32098+ f0 Linux/PA-RISC
boot
/dev/sda2 5 8 32130 83 Linux
/dev/sda3 9 1106 8819685 5 Extended
/dev/sda5 434 464 248976 82 Linux swap /
Solaris
/dev/sda6 465 1106 5156833+ 83 Linux
/dev/sda7 9 433 3413749+ 83 Linux
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [0]
Detect network card: [0]
Configure network: [0]
Detect CD: [0]
Load installer modules: [0]
Detect hard drives: [0]
Partition hard drives: [0]
Create file systems: [0]
Mount partitions: [0]
Install base system: [E]
Install boot loader: [0]
Installed system ok: [0]
Comments/Problems:
Some comments regarding partitionning:
I notice that xfs filesystem is unusable during installation, i've found
in the log file those lines:
Jan 28 20:55:24 modprobe: FATAL: Error inserting xfs
(/lib/modules/2.6.14-2-parisc/kernel/fs/xfs/xfs.ko): Invalid module
format
Jan 28 20:55:24 kernel: module xfs relocation of symbol freeze_bdev is
out of range (0x3ffeffda in 17 bits)
The critical point is the base-system installation, it fails due to
dependency problems with aptitude and tasksel.
Aptitude fails to install because libapt-pkg-libc6.3-6-3.10 and
libsigc++-2.0-0c2 are not available in testing nor in unstable. And
tasksel depends on aptitude.
To install, i had to install a sarge system (which also fails on setting
up apt after the base-system installation).
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release file:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060108)"
==============================================
Hardware information for installed system:
==============================================
umame -a: Linux luke 2.6.14-2-parisc #2 Wed Dec 21 18:22:11 UTC 2005 parisc unknown
lspci -v -t: -+-[01]---00.0 Hewlett-Packard Company Visualize FXe
lspci -v -t: \-[00]-+-0c.0 Digital Equipment Corporation DECchip 21142/43
lspci -v -t: +-0d.0 Analog Devices AD1889 sound chip
lspci -v -t: +-0e.0 National Semiconductor Corporation 87415/87560 IDE
lspci -v -t: +-0e.1 National Semiconductor Corporation 87560 Legacy I/O
lspci -v -t: +-0e.2 National Semiconductor Corporation USB Controller
lspci -v -t: \-0f.0 LSI Logic / Symbios Logic 53c895a
lspci -n: 0000:00:0c.0 0200: 1011:0019 (rev 41)
lspci -n: 0000:00:0d.0 0401: 11d4:1889
lspci -n: 0000:00:0e.0 0101: 100b:0002 (rev 03)
lspci -n: 0000:00:0e.1 0680: 100b:000e (rev 01)
lspci -n: 0000:00:0e.2 0c03: 100b:0012 (rev 02)
lspci -n: 0000:00:0f.0 0100: 1000:0012 (rev 01)
lspci -n: 0000:01:00.0 0302: 103c:108b (rev 03)
lspci -v: 0000:00:0c.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
lspci -v: Subsystem: Hewlett-Packard Company: Unknown device 104f
lspci -v: Flags: bus master, medium devsel, latency 255, IRQ 65
lspci -v: I/O ports at 0f00 [size=128]
lspci -v: Memory at f4005000 (32-bit, non-prefetchable) [size=1K]
lspci -v: Expansion ROM at f4040000 [disabled] [size=256K]
lspci -v:
lspci -v: 0000:00:0d.0 Multimedia audio controller: Analog Devices AD1889 sound chip
lspci -v: Subsystem: Analog Devices AD1889 sound chip
lspci -v: Flags: bus master, medium devsel, latency 255, IRQ 66
lspci -v: Memory at f4009000 (32-bit, prefetchable) [size=512]
lspci -v: Memory at f4008000 (32-bit, prefetchable) [size=16]
lspci -v: Memory at f4007000 (32-bit, prefetchable) [size=16]
lspci -v: Memory at f4006000 (32-bit, prefetchable) [size=16]
lspci -v: Capabilities: [dc] Power Management version 1
lspci -v:
lspci -v: 0000:00:0e.0 IDE interface: National Semiconductor Corporation 87415/87560 IDE (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
lspci -v: Flags: bus master, medium devsel, latency 255, IRQ 7
lspci -v: I/O ports at 0e00 [size=8]
lspci -v: I/O ports at 0d00 [size=4]
lspci -v: I/O ports at 0b00 [size=8]
lspci -v: I/O ports at 0a00 [size=4]
lspci -v: I/O ports at 0900 [size=16]
lspci -v:
lspci -v: 0000:00:0e.1 Bridge: National Semiconductor Corporation 87560 Legacy I/O (rev 01)
lspci -v: Flags: bus master, medium devsel, latency 255, IRQ 67
lspci -v:
lspci -v: 0000:00:0e.2 USB Controller: National Semiconductor Corporation USB Controller (rev 02) (prog-if 10)
lspci -v: Flags: bus master, medium devsel, latency 240, IRQ 1
lspci -v: Memory at f4004000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Memory at f4003000 (32-bit, non-prefetchable) [size=4K]
lspci -v:
lspci -v: 0000:00:0f.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895a (rev 01)
lspci -v: Subsystem: LSI Logic / Symbios Logic: Unknown device 1000
lspci -v: Flags: bus master, medium devsel, latency 255, IRQ 68
lspci -v: I/O ports at 0800 [size=256]
lspci -v: Memory at f4002000 (32-bit, non-prefetchable) [size=1K]
lspci -v: Memory at f4000000 (32-bit, non-prefetchable) [size=8K]
lspci -v: Capabilities: [40] Power Management version 2
lspci -v:
lspci -v: 0000:01:00.0 3D controller: Hewlett-Packard Company Visualize FXe (rev 03)
lspci -v: Subsystem: Hewlett-Packard Company: Unknown device 108c
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 255, IRQ 69
lspci -v: Memory at fb000000 (64-bit, prefetchable) [size=16M]
lspci -v: Memory at fa000000 (64-bit, non-prefetchable) [size=16M]
lspci -v: Expansion ROM at f4800000 [disabled] [size=128K]
lspci -v:
lspci -x: 0000:00:0c.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
lspci -x: 00: 11 10 19 00 57 01 80 02 41 00 00 02 10 ff 00 00
lspci -x: 10: 01 0f 00 00 00 50 00 f4 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 4f 10
lspci -x: 30: 00 00 04 f4 00 00 00 00 00 00 00 00 02 01 14 28
lspci -x:
lspci -x: 0000:00:0d.0 Multimedia audio controller: Analog Devices AD1889 sound chip
lspci -x: 00: d4 11 89 18 46 01 90 02 00 00 01 04 00 ff 00 00
lspci -x: 10: 08 90 00 f4 08 80 00 f4 08 70 00 f4 08 60 00 f4
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 d4 11 89 18
lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 03 01 01 ff
lspci -x:
lspci -x: 0000:00:0e.0 IDE interface: National Semiconductor Corporation 87415/87560 IDE (rev 03)
lspci -x: 00: 0b 10 02 00 55 01 00 02 03 8f 01 01 10 ff 80 00
lspci -x: 10: 01 0e 00 00 01 0d 00 00 01 0b 00 00 01 0a 00 00
lspci -x: 20: 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:0e.1 Bridge: National Semiconductor Corporation 87560 Legacy I/O (rev 01)
lspci -x: 00: 0b 10 0e 00 47 01 00 02 01 00 80 06 10 ff 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:0e.2 USB Controller: National Semiconductor Corporation USB Controller (rev 02)
lspci -x: 00: 0b 10 12 00 57 01 00 02 02 10 03 0c 00 f0 80 00
lspci -x: 10: 00 40 00 f4 00 30 00 f4 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00
lspci -x:
lspci -x: 0000:00:0f.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895a (rev 01)
lspci -x: 00: 00 10 12 00 57 01 10 02 01 00 00 01 10 ff 00 00
lspci -x: 10: 01 08 00 00 00 20 00 f4 00 00 00 f4 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 10
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 01 01 11 40
lspci -x:
lspci -x: 0000:01:00.0 3D controller: Hewlett-Packard Company Visualize FXe (rev 03)
lspci -x: 00: 3c 10 8b 10 46 00 a0 02 03 00 02 03 00 ff 00 00
lspci -x: 10: 0c 00 00 fb 00 00 00 00 04 00 00 fa 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 8c 10
lspci -x: 30: 00 00 80 f4 00 00 00 00 00 00 00 00 00 01 00 00
lspci -x:
lsmod: Module Size Used by
lsmod: exportfs 6944 0
lsmod: ext3 178824 2
lsmod: jbd 72436 1 ext3
lsmod: zalon7xx 42864 0
lsmod: lasi700 3840 0
lsmod: 53c700 36364 1 lasi700
lsmod: lasi_82596 29908 0
lsmod: isofs 44280 0
lsmod: ide_cd 50500 0
lsmod: cdrom 45852 1 ide_cd
lsmod: ide_disk 22848 0
lsmod: ide_generic 1216 0 [permanent]
lsmod: cmd64x 14236 0 [permanent]
lsmod: sd_mod 21680 5
lsmod: usbhid 44004 0
lsmod: usbkbd 8384 0
lsmod: ohci_hcd 37700 0
lsmod: sym53c8xx 96948 4
lsmod: scsi_transport_spi 30272 3 zalon7xx,53c700,sym53c8xx
lsmod: usbcore 138900 3 usbhid,usbkbd,ohci_hcd
lsmod: scsi_mod 168196 6 zalon7xx,lasi700,53c700,sd_mod,sym53c8xx,scsi_transport_spi
lsmod: ns87415 5956 0 [permanent]
lsmod: ide_core 142416 5 ide_cd,ide_disk,ide_generic,cmd64x,ns87415
lsmod: tulip 64604 0
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 102400 25668 76732 25% /
df: tmpfs 255732 436 255296 0% /dev
df: tmpfs 255732 436 255296 0% /dev
df: tmpfs 255732 436 255296 0% /.dev
df: /dev/scsi/host0/bus0/target6/lun0/part7 3360124 218132 3107856 7% /target
df: /dev/scsi/host0/bus0/target6/lun0/part2 30107 10689 19097 36% /target/boot
df: /dev/scsi/host0/bus0/target6/lun0/part6 5075808 230672 4793568 5% /target/var
free: total used free shared buffers
free: Mem: 511468 338612 172856 0 17260
free: Swap: 248968 0 248968
free: Total: 760436 338612 421824
cardctl status: /usr/bin/report-hw: 32: cardctl: not found
cardctl ident: /usr/bin/report-hw: 33: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: cpu family : PA-RISC 2.0
/proc/cpuinfo: cpu : PA8600 (PCX-W+)
/proc/cpuinfo: cpu MHz : 400.000000
/proc/cpuinfo: model : 9000/785/B2000
/proc/cpuinfo: model name : Kazoo W+
/proc/cpuinfo: hversion : 0x00005d00
/proc/cpuinfo: sversion : 0x00000481
/proc/cpuinfo: I-cache : 512 KB
/proc/cpuinfo: D-cache : 1024 KB (WB, 0-way associative)
/proc/cpuinfo: ITLB entries : 160
/proc/cpuinfo: DTLB entries : 160 - shared with ITLB
/proc/cpuinfo: BTLB : not supported
/proc/cpuinfo: bogomips : 799.53
/proc/cpuinfo: software id : 2010833216
/proc/cpuinfo:
/proc/ioports: 00000000-00001fff : PCI00 Ports
/proc/ioports: 00000020-0000003e : pic1
/proc/ioports: 000000a0-000000be : pic2
/proc/ioports: 000007e0-000007fe : acpi
/proc/ioports: 00000800-000008ff : sym53c8xx
/proc/ioports: 00000900-00000907 : ide0
/proc/ioports: 00000908-0000090f : ide1
/proc/ioports: 00000d02-00000d02 : ide0
/proc/ioports: 00000e00-00000e07 : ide0
/proc/ioports: 00000f00-00000f7f : tulip
/proc/ioports: 00012000-00013fff : PCI01 Ports
/proc/iomem: 00000000-1fffffff : System RAM
/proc/iomem: 00000000-000009ff : PDC data (Page Zero)
/proc/iomem: 00100000-0034ffff : Kernel code
/proc/iomem: 00350000-0045a7af : Kernel data
/proc/iomem: f05d0000-f05d0000 : lcd_data
/proc/iomem: f05d0008-f05d0008 : lcd_cmd
/proc/iomem: f4000000-f47fffff : PCI00 LMMIO
/proc/iomem: f4000000-f4001fff : sym53c8xx
/proc/iomem: f4002000-f40023ff : sym53c8xx
/proc/iomem: f4004000-f4004fff : ohci_hcd
/proc/iomem: f4005000-f40053ff : tulip
/proc/iomem: f4800000-f4ffffff : PCI01 LMMIO
/proc/iomem: fa000000-fbffffff : PCI01 ELMMIO
/proc/iomem: fed00000-fed00fff : 10
/proc/iomem: fed30000-fed30fff : 10:0
/proc/iomem: fed32000-fed32fff : 10:1
/proc/iomem: fef00000-feffffff : Astro Intr Ack
/proc/iomem: fff80000-fffaffff : Central Bus
/proc/iomem: fffa0000-fffa0fff : 32
/proc/iomem: fffb0000-fffdffff : Local Broadcast
/proc/iomem: fffe0000-ffffffff : Global Broadcast
/proc/interrupts: CPU0
/proc/interrupts: 1: 7623 SuperIO ohci_hcd:usb1
/proc/interrupts: 7: 6486 SuperIO ide0
/proc/interrupts: 64: 331399 CPU timer
/proc/interrupts: 65: 113580 IO-SAPIC-level eth0
/proc/interrupts: 67: 14666 IO-SAPIC-level SuperIO
/proc/interrupts: 68: 36008 IO-SAPIC-level sym53c8xx
/proc/meminfo: MemTotal: 511468 kB
/proc/meminfo: MemFree: 172856 kB
/proc/meminfo: Buffers: 17260 kB
/proc/meminfo: Cached: 280872 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 245436 kB
/proc/meminfo: Inactive: 64140 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 511468 kB
/proc/meminfo: LowFree: 172856 kB
/proc/meminfo: SwapTotal: 248968 kB
/proc/meminfo: SwapFree: 248968 kB
/proc/meminfo: Dirty: 9640 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 12668 kB
/proc/meminfo: Slab: 23672 kB
/proc/meminfo: CommitLimit: 504700 kB
/proc/meminfo: Committed_AS: 49160 kB
/proc/meminfo: PageTables: 376 kB
/proc/meminfo: VmallocTotal: 245728 kB
/proc/meminfo: VmallocUsed: 1652 kB
/proc/meminfo: VmallocChunk: 243800 kB
/proc/bus/input/devices: I: Bus=0003 Vendor=047b Product=0002 Version=0120
/proc/bus/input/devices: N: Name="SILITEK USB Keyboard and Mouse"
/proc/bus/input/devices: P: Phys=usb-0000:00:0e.2-1/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: LED=1f
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=047b Product=0002 Version=0120
/proc/bus/input/devices: N: Name="SILITEK USB Keyboard and Mouse"
/proc/bus/input/devices: P: Phys=usb-0000:00:0e.2-1/input1
/proc/bus/input/devices: H: Handlers=kbd mouse0
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=7001f 0 0 0 c000 100000 0 0 0
/proc/bus/input/devices: B: REL=103
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=046d Product=c000 Version=0401
/proc/bus/input/devices: N: Name="Logitech N43"
/proc/bus/input/devices: P: Phys=usb-0000:00:0e.2-2/input0
/proc/bus/input/devices: H: Handlers=mouse1
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices:
dmidecode: /usr/bin/report-hw: 41: dmidecode: not found
==============================================
Installer status file:
==============================================
Package: usb-modules-2.6.14-2-parisc-di
Status: install ok unpacked
Version: 1.4
Provides: usb-modules
Depends: kernel-image-2.6.14-2-parisc-di
Description: USB support
Package: preseed-common
Status: install ok unpacked
Version: 1.11
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.03
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.35)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 0.28
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.5-11
Description: GNU C Library: NSS helper for DNS - udeb
Package: ide-modules-2.6.14-2-parisc-di
Status: install ok unpacked
Version: 1.4
Provides: ide-modules
Depends: kernel-image-2.6.14-2-parisc-di
Description: IDE drivers
Package: cdrom-checker
Status: install ok unpacked
Version: 1.05
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.12
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: console-keymaps-usb
Status: install ok installed
Version: 2002.12.04dbs-52
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for USB keyboards
Package: cdrom-retriever
Status: install ok installed
Version: 1.07
Provides: retriever
Depends: cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.09
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.35)
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.22
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: input-modules-2.6.14-2-parisc64-di
Status: install ok unpacked
Version: 1.4
Provides: input-modules
Depends: kernel-image-2.6.14-2-parisc64-di, usb-modules-2.6.14-2-parisc64-di
Description: Input devices support
Package: di-utils
Status: install ok installed
Version: 1.22
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.36)
Description: Miscellaneous utilities for the debian installer
Package: nic-modules-2.6.14-2-parisc64-di
Status: install ok unpacked
Version: 1.4
Provides: nic-modules
Depends: kernel-image-2.6.14-2-parisc64-di
Description: Common NIC drivers
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.93
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.51
Description: Newt frontend for Debian Configuration Management System
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-1
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.28
Description: Skeleton root filesystem used by debian-installer
Package: udev-udeb
Status: install ok unpacked
Version: 0.079-1
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: cdrom-core-modules-2.6.14-2-parisc64-di
Status: install ok unpacked
Version: 1.4
Provides: cdrom-core-modules
Depends: kernel-image-2.6.14-2-parisc64-di, ide-modules-2.6.14-2-parisc64-di
Description: CDROM support
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-1
Depends: libc-udeb
Description: Free Implementation of the Unicode BiDi algorithm
Package: nic-modules-2.6.14-2-parisc-di
Status: install ok unpacked
Version: 1.4
Provides: nic-modules
Depends: kernel-image-2.6.14-2-parisc-di
Description: Common NIC drivers
Package: rescue-check
Status: install ok unpacked
Version: 1.0
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.3.10-1
Provides: editor
Depends: libc-udeb, libslang2-udeb
Description: free Pico clone with some new features - tiny build
Package: cdrom-core-modules-2.6.14-2-parisc-di
Status: install ok unpacked
Version: 1.4
Provides: cdrom-core-modules
Depends: kernel-image-2.6.14-2-parisc-di, ide-modules-2.6.14-2-parisc-di
Description: CDROM support
Package: usb-storage-modules-2.6.14-2-parisc-di
Status: install ok unpacked
Version: 1.4
Provides: usb-storage-modules
Depends: ide-modules-2.6.14-2-parisc-di, scsi-modules-2.6.14-2-parisc-di, usb-modules-2.6.14-2-parisc-di
Description: USB storage support
Package: usb-modules-2.6.14-2-parisc64-di
Status: install ok unpacked
Version: 1.4
Provides: usb-modules
Depends: kernel-image-2.6.14-2-parisc64-di
Description: USB support
Package: load-cdrom
Status: install ok installed
Version: 1.07
Depends: cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 14
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.93
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System
Package: iso-3166-udeb
Status: install ok installed
Version: 0.49-1
Description: provides iso_3166.tab file
Package: floppy-retriever
Status: install ok unpacked
Version: 1.07
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.01-4
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.11
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: usb-storage-modules-2.6.14-2-parisc64-di
Status: install ok unpacked
Version: 1.4
Provides: usb-storage-modules
Depends: ide-modules-2.6.14-2-parisc64-di, scsi-modules-2.6.14-2-parisc64-di, usb-modules-2.6.14-2-parisc64-di
Description: USB storage support
Package: archdetect
Status: install ok installed
Version: 1.32
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.36)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.10
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.22
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.20
Depends: cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.1.11-15.3
Depends: libc6 (>= 2.3.5-1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2002.12.04dbs-52
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.22
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.32
Depends: rootskel (>= 0.54), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.15)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.22
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.36), console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.36
Provides: libdebian-installer4
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: kernel-image-2.6.14-2-parisc-di
Status: install ok unpacked
Version: 1.4
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: installation-locale
Status: install ok unpacked
Version: 1.0
Depends: rootskel
Description: UTF-8 C locale
Package: ide-modules-2.6.14-2-parisc64-di
Status: install ok unpacked
Version: 1.4
Provides: ide-modules
Depends: kernel-image-2.6.14-2-parisc64-di
Description: IDE drivers
Package: env-preseed
Status: install ok unpacked
Version: 1.11
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.4
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.93
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: file-preseed
Status: install ok unpacked
Version: 1.11
Depends: di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: scsi-modules-2.6.14-2-parisc64-di
Status: install ok unpacked
Version: 1.4
Provides: scsi-modules
Depends: kernel-image-2.6.14-2-parisc64-di, cdrom-core-modules-2.6.14-2-parisc64-di
Description: SCSI drivers
Package: input-modules-2.6.14-2-parisc-di
Status: install ok unpacked
Version: 1.4
Provides: input-modules
Depends: kernel-image-2.6.14-2-parisc-di, usb-modules-2.6.14-2-parisc-di
Description: Input devices support
Package: kernel-image-2.6.14-2-parisc64-di
Status: install ok unpacked
Version: 1.4
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.93
Provides: libdebconfclient0
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: cdrom-detect
Status: install ok installed
Version: 1.11
Depends: hw-detect, di-utils (>= 1.15)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 14
Package: scsi-modules-2.6.14-2-parisc-di
Status: install ok unpacked
Version: 1.4
Provides: scsi-modules
Depends: kernel-image-2.6.14-2-parisc-di, cdrom-core-modules-2.6.14-2-parisc-di
Description: SCSI drivers
Package: debian-installer
Status: install ok installed
Version: cdrom-2.6-20060108
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.4
Depends: cdrom-detect
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 84
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.4
Depends: choose-mirror
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.4
Depends: apt-mirror-setup
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 420
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.42
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.36), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdebconf-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.95
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.37), libtextwrap1 (>> 0.01-0)
Provides: debconf-2.0
Description: Debian Configuration Management System (C-implementation)
Debconf is a configuration management system for Debian packages. It is
used by some packages to prompt you for information before they are
installed. This is a reimplementation of the original debconf version
in C.
.
cdebconf-udeb is a minimal cdebconf package used by the
debian-installer
Package: choose-mirror
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.36), configured-network
Description: Choose mirror to install from
Installer-Menu-Item: 23
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.5
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 160
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 168
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.36)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.32
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 432
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2005.12.31-1
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ethdetect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.32
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: ethernet-card-detection
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 15
Package: ext3-modules-2.6.14-2-parisc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 392
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.4
Depends: kernel-image-2.6.14-2-parisc-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1152
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.8-1
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 48
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2005.12.31-1
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2160
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.5-12
Provides: libc6, libc-udeb, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.02-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libiw28-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Guus Sliepen <guus@debian.org>
Version: 27+28pre13-1
Provides: libiw28
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: libparted1.6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 432
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.6.25.1-1
Depends: libc6 (>= 2.3.5-1), libuuid1
Provides: libparted1.6-13
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 28
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2005.12.31-1
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: loop-modules-2.6.14-2-parisc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.4
Depends: kernel-image-2.6.14-2-parisc-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 524
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.01-3
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: lvmcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 396
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.08
Depends: cdebconf-udeb, md-modules, lvm2-udeb, parted-udeb, di-utils (>= 1.15)
Description: lvmcfg without the main menu item
Package: md-modules-2.6.14-2-parisc-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 488
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.4
Depends: kernel-image-2.6.14-2-parisc-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 116
Maintainer: Debian/Ubuntu mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 1.12.0-1
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux md device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 304
Maintainer: Paul Fleischer <proguy@proguy.dk>
Version: 1.13
Depends: cdebconf-udeb, md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-1
Depends: libc6 (>= 2.3.2.ds1-4), libuuid1
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: netcfg
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 668
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.37), libiw28-udeb, cdebconf-udeb, dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Provides: configured-network
Description: Configure the network
To install additional installer components or the Debian Base System over
the network, you need to configure the network in the installer. This
component will first try to configure your network with DHCP and ask
you for static network configuration if this fails. The configured
network settings will be copied to your newly installed system.
Installer-Menu-Item: 18
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.06
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: palo-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 12
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.0.8
Depends: cdebconf-udeb, base-installer, di-utils-mapdevfs
Provides: bootable-system
Description: Install PALO on a hard disk
Installer-Menu-Item: 73
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.35), libparted1.6-13 (>= 1.6.0), libparted1.6-udeb
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.6.25.1-1
Depends: libc6 (>= 2.3.5-1), libparted1.6-13 (>= 1.6.24)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 56
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 7
Depends: partman-base (>= 73), partman-auto (>= 46), partman-lvm, di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 772
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 78
Depends: libc6 (>= 2.3.5-1), libparted1.6-13 (>= 1.6.24), libparted1.6-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: partman, made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 480
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 116
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 39
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 15
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: lvmcfg-utils, lvm2-udeb, partman-base, di-utils (>= 1.14)
Description: Add to partman support for LVM
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Paul Fleischer <proguy@proguy.dk>
Version: 22
Depends: mdadm-udeb, mdcfg-utils, partman-base
Description: Add to partman support for MD
Package: partman-palo
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 84
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: palo-udeb, partman
Description: Add to partman support for PALO boot partitions
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 316
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 37
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 192
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 28
Depends: reiserfsprogs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 192
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 27
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pkgsel
Status: install ok half-configured
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.04
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: prebaseconfig
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: archdetect, base-installer, created-fstab, bootable-system
Description: Finish the installation and reboot
finish the installation and reboot
Installer-Menu-Item: 78
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 196
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.7
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.05
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: xfs-modules-2.6.14-2-parisc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 884
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.4
Depends: kernel-image-2.6.14-2-parisc-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 276
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.7.7-1
Depends: libc6 (>= 2.3.5-1), libuuid1
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
==============================================
Installer syslog:
==============================================
==============================================
Installer messages log:
==============================================
==============================================
Installer partman log:
==============================================
--- End Message ---