[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#391867: marked as done ("port is slow to respond" on computer with SATA disk)

Your message dated Wed, 24 Jan 2007 21:40:23 +0000
with message-id <E1H9pqx-0000HJ-7O@ries.debian.org>
and subject line Bug#391867: fixed in linux-2.6 2.6.18.dfsg.1-9
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: linux-image-2.6.18-1-686
Version: 2.6.18-2

Mine is a Dell machine with SATA disk, I am using Debian sid, with
debian official kernel 2.6.18.
On boot time, it says:

ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 58
ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 58
scsi0 : ata_piix
ata1.00: ATA-6, max UDMA/133, 156250000 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 8
ata1.00: configured for UDMA/133
scsi1 : ata_piix
ata2: port is slow to respond, please be patient
ata2: port failed to respond (30 secs)
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: softreset failed, retrying in 5 secs
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: softreset failed, retrying in 5 secs
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: reset failed, giving up
Vendor: ATA Model: ST380013AS Rev: 8.12
Type: Direct-Access ANSI SCSI revision: 05

Following is full `dmesg` and `lspci` result. Also, after searching the
web,
I found someone said that this may be a libata-core.c thing, so I report
this
here.

[~]$ dmesg
Linux version 2.6.18-1-686 (Debian 2.6.18-2) (waldi@debian.org) (gcc
version 4.1.2 20060920 (prerelease) (Debian 4.1.1-14)) #1 SMP Fri Sep 29
16:25:40 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f686c00 (usable)
BIOS-e820: 000000001f686c00 - 000000001f688c00 (ACPI NVS)
BIOS-e820: 000000001f688c00 - 000000001f68ac00 (ACPI data)
BIOS-e820: 000000001f68ac00 - 0000000020000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
502MB LOWMEM available.
found SMP MP-table at 000fe710
On node 0 totalpages: 128646
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 124550 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 DELL ) @ 0x000fec00
ACPI: RSDT (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcc05
ACPI: FADT (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcc45
ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd3808
ACPI: MADT (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fccb9
ACPI: BOOT (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcd2b
ACPI: ASF! (v016 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcd53
ACPI: MCFG (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcdba
ACPI: HPET (v001 DELL GX280 0x00000007 ASL 0x00000061) @ 0x000fcdf8
ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
Detected 2793.497 MHz processor.
Built 1 zonelists. Total pages: 128646
Kernel command line: root=/dev/sda1 ro vga=791
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 505668k/514584k available (1534k kernel code, 8416k reserved,
575k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xe0000000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Calibrating delay using timer specific routine.. 5591.07 BogoMIPS
(lpj=11182147)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000
0000441d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00100000 00000000 00000000
0000441d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00100000 00000000 00000180 0000441d
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
Total of 1 processors activated (5591.07 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 1316k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:00:02.0
PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:01: ioport range 0x800-0x85f could not be reserved
pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
pnp: 00:0a: ioport range 0x100-0x1fe has been reserved
pnp: 00:0a: ioport range 0x200-0x277 has been reserved
pnp: 00:0a: ioport range 0x280-0x2e7 has been reserved
pnp: 00:0a: ioport range 0x2f0-0x2f7 has been reserved
pnp: 00:0a: ioport range 0x300-0x377 has been reserved
pnp: 00:0a: ioport range 0x380-0x3bb has been reserved
pnp: 00:0a: ioport range 0x3c0-0x3e7 has been reserved
pnp: 00:0a: ioport range 0x3f6-0x3f7 has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: dfd00000-dfdfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: dfc00000-dfcfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: dfb00000-dfbfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
audit: initializing netlink socket (disabled)
audit(1160360913.160:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie03]
vesafb: framebuffer at 0xc0000000, mapped to 0xe0080000, using 3072k,
total 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 217, io base 0x0000ff80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 225, io base 0x0000ff60
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 233, io base 0x0000ff40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 50, io base 0x0000ff20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 217, io mem 0xffa80800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
usb 1-2: unable to read config index 0 descriptor/start
usb 1-2: can't read configurations, error -71
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usbcore: registered new driver hiddev
usb 1-2: new low speed USB device using uhci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /class/input/input0
input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-2
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as
/class/input/input1
input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with
IntelliEye(TM)] on usb-0000:00:1d.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
SCSI subsystem initialized
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 58
ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 58
scsi0 : ata_piix
ata1.00: ATA-6, max UDMA/133, 156250000 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 8
ata1.00: configured for UDMA/133
scsi1 : ata_piix
ata2: port is slow to respond, please be patient
ata2: port failed to respond (30 secs)
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: softreset failed, retrying in 5 secs
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: softreset failed, retrying in 5 secs
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: reset failed, giving up
Vendor: ATA Model: ST380013AS Rev: 8.12
Type: Direct-Access ANSI SCSI revision: 05
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: Attached scsi disk sda
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
input: PC Speaker as /class/input/input2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915G Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
ts: Compaq touchscreen protocol output
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
ICH6: chipset revision 3
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: JLMS DVD-ROM XJ-HD166, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
hda: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
tg3.c:v3.65 (August 07, 2006)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express)
10/100/1000BaseT Ethernet 00:11:43:c2:6f:8f
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
EXT3 FS on sda1, internal journal
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
[drm] Initialized i915 1.5.0 20060119 on minor 0
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver

[~]$ lspci
00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express
Memory Controller Hub (rev 04)
00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express PCI
Express Root Port (rev 04)
00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL
Express Chipset Family Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation 82915G Express Chipset
Family Graphics Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC
Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA
Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
SMBus Controller (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751
Gigabit Ethernet PCI Express (rev 01)
04:00.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1
(rev 10)


I searched on web, some one using other distribution got same problem, too:

http://permalink.gmane.org/gmane.linux.ide/13283


    [PATCH] libata: skip reset on bus not a device

From: Joe Jin <lkmaillist <at> gmail.com>
Subject: [PATCH] libata: skip reset on bus not a device
<http://news.gmane.org/find-root.php?message_id=%3c215036450609292206pd16c7cxa1c5c77ee52c050e%40mail.gmail.com%3e>
Newsgroups: gmane.linux.ide <http://news.gmane.org/gmane.linux.ide>,
gmane.linux.kernel <http://news.gmane.org/gmane.linux.kernel>
Date: 2006-09-30 05:06:47 GMT

Hi,

On my pc(Dell OptiPlex GX620), while boot up it by 2.6.18, the next
info always report:
===========================================
ata2: port is slow to respond, please be patient
ata2: port failed to respond (30 secs)
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: softreset failed, retrying in 5 secs
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: softreset failed, retrying in 5 secs
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: reset failed, giving up
===========================================

and follow is lspci output:
===========================================
00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory
Controller Hub (rev 02)
        Subsystem: Dell: Unknown device 01ad
        Flags: bus master, fast devsel, latency 0
        Capabilities: <available only to root>
00: 86 80 70 27 06 01 90 20 02 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 ad 01
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge: Intel Corporation 945G/GZ/P/PL Express PCI Express
Root Port (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: fe900000-fe9fffff
        Capabilities: <available only to root>
00: 86 80 71 27 07 05 10 00 02 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00
 20: 90 fe 90 fe f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 88 00 00 00 00 00 00 00 0b 01 02 00

00:02.0 VGA compatible controller: Intel Corporation 945G/GZ Express
Integrated Graphics Controller (rev 02) (prog-if 00 [VGA])
        Subsystem: Dell: Unknown device 01ad
        Flags: bus master, fast devsel, latency 0, IRQ 169
        Memory at feb00000 (32-bit, non-prefetchable) [size=512K]
        I/O ports at e898 [size=8]
         Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Memory at feac0000 (32-bit, non-prefetchable) [size=256K]
        Capabilities: <available only to root>
00: 86 80 72 27 07 00 90 00 02 00 00 03 00 00 80 00
10: 00 00 b0 fe 99 e8 00 00 08 00 00 e0 00 00 ac fe
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 ad 01
30: 00 00 00 00 90 00 00 00 00 00 00 00 0b 01 00 00

00:02.1 Display controller: Intel Corporation 945G/GZ Express
Integrated Graphics Controller (rev 02)
        Subsystem: Dell: Unknown device 01ad
        Flags: bus master, fast devsel, latency 0
        Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: <available only to root>
00: 86 80 76 27 07 00 90 00 02 00 80 03 00 00 80 00
10: 00 00 b8 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 ad 01
30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: fe800000-fe8fffff
        Capabilities: <available only to root>
00: 86 80 d0 27 07 05 10 00 01 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 20
 20: 80 fe 80 fe f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 02 00

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 (rev 01) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Memory behind bridge: fe700000-fe7fffff
        Capabilities: <available only to root>
00: 86 80 d2 27 07 05 10 00 01 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 20
20: 70 fe 70 fe f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 02 02 00

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #1 (rev 01) (prog-if 00 [UHCI])
        Subsystem: Dell: Unknown device 01ad
        Flags: bus master, medium devsel, latency 0, IRQ 233
         I/O ports at ff80 [size=32]
00: 86 80 c8 27 05 00 80 02 01 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 ff 00 00 00 00 00 00 00 00 00 00 28 10 ad 01
30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #2 (rev 01) (prog-if 00 [UHCI])
        Subsystem: Dell: Unknown device 01ad
        Flags: bus master, medium devsel, latency 0, IRQ 50
        I/O ports at ff60 [size=32]
00: 86 80 c9 27 05 00 80 02 01 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 61 ff 00 00 00 00 00 00 00 00 00 00 28 10 ad 01
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #3 (rev 01) (prog-if 00 [UHCI])
        Subsystem: Dell: Unknown device 01ad
        Flags: bus master, medium devsel, latency 0, IRQ 58
        I/O ports at ff40 [size=32]
00: 86 80 ca 27 05 00 80 02 01 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 ff 00 00 00 00 00 00 00 00 00 00 28 10 ad 01
30: 00 00 00 00 00 00 00 00 00 00 00 00 03 03 00 00

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #4 (rev 01) (prog-if 00 [UHCI])
        Subsystem: Dell: Unknown device 01ad
        Flags: bus master, medium devsel, latency 0, IRQ 225
        I/O ports at ff20 [size=32]
00: 86 80 cb 27 05 00 80 02 01 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 ff 00 00 00 00 00 00 00 00 00 00 28 10 ad 01
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 04 00 00

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller (rev 01) (prog-if 20 [EHCI])
        Subsystem: Dell: Unknown device 01ad
        Flags: bus master, medium devsel, latency 0, IRQ 233
        Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <available only to root>
00: 86 80 cc 27 06 01 90 02 01 20 03 0c 00 00 00 00
10: 00 08 a8 ff 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 ad 01
30: 00 00 00 00 50 00 00 00 00 00 00 00 09 01 00 00

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
(prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
        Capabilities: <available only to root>
00: 86 80 4e 24 07 01 10 00 e1 01 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 04 04 20 f0 00 80 22
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 02 00

00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7
Family) AC'97 Audio Controller (rev 01)
        Subsystem: Dell: Unknown device 01ad
        Flags: bus master, medium devsel, latency 0, IRQ 225
        I/O ports at ec00 [size=256]
        I/O ports at e8c0 [size=64]
        Memory at feabfa00 (32-bit, non-prefetchable) [size=512]
        Memory at feabf900 (32-bit, non-prefetchable) [size=256]
        Capabilities: <available only to root>
00: 86 80 de 27 07 00 90 02 01 00 01 04 00 00 00 00
10: 01 ec 00 00 c1 e8 00 00 00 fa ab fe 00 f9 ab fe
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 ad 01
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00

00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
        Flags: bus master, medium devsel, latency 0
        Capabilities: <available only to root>
00: 86 80 b8 27 07 01 10 02 01 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01) (prog-if 8a [Master SecP PriP])
        Subsystem: Dell: Unknown device 01ad
        Flags: bus master, medium devsel, latency 0, IRQ 169
        I/O ports at <ignored>
        I/O ports at <ignored>
        I/O ports at <ignored>
        I/O ports at <ignored>
        I/O ports at ffa0 [size=16]
00: 86 80 df 27 05 00 88 02 01 8a 01 01 00 00 00 00
10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 28 10 ad 01
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00

00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)
Serial ATA Storage Controller IDE (rev 01) (prog-if 8f [Master SecP
SecO PriP PriO])
        Subsystem: Dell: Unknown device 01ad
        Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 217
        I/O ports at fe00 [size=8]
        I/O ports at fe10 [size=4]
        I/O ports at fe20 [size=8]
        I/O ports at fe30 [size=4]
        I/O ports at fea0 [size=16]
        Capabilities: <available only to root>
00: 86 80 c0 27 07 00 b0 02 01 8f 01 01 00 00 00 00
10: 01 fe 00 00 11 fe 00 00 21 fe 00 00 31 fe 00 00
20: a1 fe 00 00 00 00 00 00 00 00 00 00 28 10 ad 01
30: 00 00 00 00 70 00 00 00 00 00 00 00 05 03 00 00

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
        Subsystem: Dell: Unknown device 01ad
        Flags: medium devsel, IRQ 177
        I/O ports at e8a0 [size=32]
00: 86 80 da 27 01 01 80 02 01 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 e8 00 00 00 00 00 00 00 00 00 00 28 10 ad 01
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751
Gigabit Ethernet PCI Express (rev 01)
        Subsystem: Dell Optiplex GX620
        Flags: bus master, fast devsel, latency 0, IRQ 169
        Memory at fe8f0000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <available only to root>
00: e4 14 77 16 06 00 10 00 01 00 00 02 10 00 00 00
10: 04 00 8f fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 07 00 00 00 28 10 ad 01
30: 00 00 00 00 48 00 00 00 00 00 00 00 0b 01 00 00
 ===========================================

through traced the code, and found which caused it:
at scsi__eh__[port_no] kernel thread, it should reset the bus, before reset it,
it never check it if have a device. if it should skip it?
thanks

attachment is the patch

--- End Message ---
--- Begin Message --- 
Source: linux-2.6
Source-Version: 2.6.18.dfsg.1-9

We believe that the bug you reported is fixed in the latest version of
linux-2.6, which is due to be installed in the Debian FTP archive:

linux-2.6_2.6.18.dfsg.1-9.diff.gz
  to pool/main/l/linux-2.6/linux-2.6_2.6.18.dfsg.1-9.diff.gz
linux-2.6_2.6.18.dfsg.1-9.dsc
  to pool/main/l/linux-2.6/linux-2.6_2.6.18.dfsg.1-9.dsc
linux-2.6_2.6.18.dfsg.1.orig.tar.gz
  to pool/main/l/linux-2.6/linux-2.6_2.6.18.dfsg.1.orig.tar.gz
linux-doc-2.6.18_2.6.18.dfsg.1-9_all.deb
  to pool/main/l/linux-2.6/linux-doc-2.6.18_2.6.18.dfsg.1-9_all.deb
linux-headers-2.6.18-4-all-powerpc_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-headers-2.6.18-4-all-powerpc_2.6.18.dfsg.1-9_powerpc.deb
linux-headers-2.6.18-4-all_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-headers-2.6.18-4-all_2.6.18.dfsg.1-9_powerpc.deb
linux-headers-2.6.18-4-powerpc-miboot_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-headers-2.6.18-4-powerpc-miboot_2.6.18.dfsg.1-9_powerpc.deb
linux-headers-2.6.18-4-powerpc-smp_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-headers-2.6.18-4-powerpc-smp_2.6.18.dfsg.1-9_powerpc.deb
linux-headers-2.6.18-4-powerpc64_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-headers-2.6.18-4-powerpc64_2.6.18.dfsg.1-9_powerpc.deb
linux-headers-2.6.18-4-powerpc_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-headers-2.6.18-4-powerpc_2.6.18.dfsg.1-9_powerpc.deb
linux-headers-2.6.18-4-prep_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-headers-2.6.18-4-prep_2.6.18.dfsg.1-9_powerpc.deb
linux-headers-2.6.18-4-vserver-powerpc64_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-headers-2.6.18-4-vserver-powerpc64_2.6.18.dfsg.1-9_powerpc.deb
linux-headers-2.6.18-4-vserver-powerpc_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-headers-2.6.18-4-vserver-powerpc_2.6.18.dfsg.1-9_powerpc.deb
linux-headers-2.6.18-4-vserver_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-headers-2.6.18-4-vserver_2.6.18.dfsg.1-9_powerpc.deb
linux-headers-2.6.18-4_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-headers-2.6.18-4_2.6.18.dfsg.1-9_powerpc.deb
linux-image-2.6.18-4-powerpc-miboot_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-image-2.6.18-4-powerpc-miboot_2.6.18.dfsg.1-9_powerpc.deb
linux-image-2.6.18-4-powerpc-smp_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-image-2.6.18-4-powerpc-smp_2.6.18.dfsg.1-9_powerpc.deb
linux-image-2.6.18-4-powerpc64_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-image-2.6.18-4-powerpc64_2.6.18.dfsg.1-9_powerpc.deb
linux-image-2.6.18-4-powerpc_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-image-2.6.18-4-powerpc_2.6.18.dfsg.1-9_powerpc.deb
linux-image-2.6.18-4-prep_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-image-2.6.18-4-prep_2.6.18.dfsg.1-9_powerpc.deb
linux-image-2.6.18-4-vserver-powerpc64_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-image-2.6.18-4-vserver-powerpc64_2.6.18.dfsg.1-9_powerpc.deb
linux-image-2.6.18-4-vserver-powerpc_2.6.18.dfsg.1-9_powerpc.deb
  to pool/main/l/linux-2.6/linux-image-2.6.18-4-vserver-powerpc_2.6.18.dfsg.1-9_powerpc.deb
linux-manual-2.6.18_2.6.18.dfsg.1-9_all.deb
  to pool/main/l/linux-2.6/linux-manual-2.6.18_2.6.18.dfsg.1-9_all.deb
linux-patch-debian-2.6.18_2.6.18.dfsg.1-9_all.deb
  to pool/main/l/linux-2.6/linux-patch-debian-2.6.18_2.6.18.dfsg.1-9_all.deb
linux-source-2.6.18_2.6.18.dfsg.1-9_all.deb
  to pool/main/l/linux-2.6/linux-source-2.6.18_2.6.18.dfsg.1-9_all.deb
linux-support-2.6.18-4_2.6.18.dfsg.1-9_all.deb
  to pool/main/l/linux-2.6/linux-support-2.6.18-4_2.6.18.dfsg.1-9_all.deb
linux-tree-2.6.18_2.6.18.dfsg.1-9_all.deb
  to pool/main/l/linux-2.6/linux-tree-2.6.18_2.6.18.dfsg.1-9_all.deb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 391867@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Bastian Blank <waldi@debian.org> (supplier of updated linux-2.6 package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.7
Date: Wed, 24 Jan 2007 13:21:51 +0100
Source: linux-2.6
Binary: linux-image-2.6.18-4-powerpc-miboot linux-headers-2.6.18-4-parisc-smp linux-modules-2.6.18-4-xen-vserver-amd64 linux-headers-2.6.18-4-vserver-amd64 linux-image-2.6.18-4-sparc64-smp linux-image-2.6.18-4-sparc32 linux-image-2.6.18-4-footbridge linux-headers-2.6.18-4-xen-vserver-686 linux-headers-2.6.18-4-powerpc linux-headers-2.6.18-4-all-i386 linux-image-2.6.18-4-alpha-legacy linux-headers-2.6.18-4-vserver-s390x linux-image-2.6.18-4-686 linux-headers-2.6.18-4-686-bigmem linux-headers-2.6.18-4-s3c2410 linux-headers-2.6.18-4-sb1a-bcm91480b linux-image-2.6.18-4-vserver-powerpc linux-manual-2.6.18 linux-headers-2.6.18-4-sb1-bcm91250a xen-linux-system-2.6.18-4-xen-vserver-686 linux-image-2.6.18-4-xen-vserver-amd64 linux-headers-2.6.18-4-all-s390 linux-image-2.6.18-4-prep linux-headers-2.6.18-4-vserver-alpha linux-headers-2.6.18-4-amd64 linux-headers-2.6.18-4-amiga linux-headers-2.6.18-4-mckinley linux-headers-2.6.18-4-parisc64-smp linux-image-2.6.18-4-mckinley linux-headers-2.6.18-4-vserver-686 linux-image-2.6.18-4-686-bigmem linux-image-2.6.18-4-s390-tape linux-headers-2.6.18-4-iop32x linux-headers-2.6.18-4 linux-headers-2.6.18-4-vserver-sparc64 linux-image-2.6.18-4-s390x linux-headers-2.6.18-4-parisc64 linux-headers-2.6.18-4-xen-vserver linux-headers-2.6.18-4-all-m68k linux-headers-2.6.18-4-all-ia64 linux-image-2.6.18-4-mac linux-headers-2.6.18-4-s390x linux-image-2.6.18-4-powerpc-smp linux-headers-2.6.18-4-all-amd64 linux-headers-2.6.18-4-686 linux-image-2.6.18-4-powerpc64 linux-headers-2.6.18-4-mac xen-linux-system-2.6.18-4-xen-amd64 linux-image-2.6.18-4-vserver-alpha linux-image-2.6.18-4-sb1-bcm91250a linux-modules-2.6.18-4-xen-amd64 linux-image-2.6.18-4-amiga linux-image-2.6.18-4-xen-vserver-686 linux-headers-2.6.18-4-powerpc64 linux-image-2.6.18-4-powerpc linux-headers-2.6.18-4-all linux-image-2.6.18-4-r5k-cobalt linux-headers-2.6.18-4-all-powerpc linux-headers-2.6.18-4-itanium linux-image-2.6.18-4-sparc64 linux-headers-2.6.18-4-alpha-legacy linux-image-2.6.18-4-rpc linux-headers-2.6.18-4-sparc64 linux-image-2.6.18-4-alpha-generic linux-image-2.6.18-4-ixp4xx linux-image-2.6.18-4-parisc64 linux-headers-2.6.18-4-footbridge linux-headers-2.6.18-4-xen-amd64 linux-headers-2.6.18-4-powerpc-miboot linux-headers-2.6.18-4-xen-686 linux-modules-2.6.18-4-xen-vserver-686 linux-image-2.6.18-4-s3c2410 linux-image-2.6.18-4-vserver-sparc64 linux-headers-2.6.18-4-atari linux-doc-2.6.18 linux-headers-2.6.18-4-all-alpha linux-image-2.6.18-4-vserver-s390x linux-headers-2.6.18-4-xen-vserver-amd64 linux-image-2.6.18-4-sb1a-bcm91480b linux-image-2.6.18-4-vserver-powerpc64 linux-image-2.6.18-4-alpha-smp linux-image-2.6.18-4-parisc64-smp linux-image-2.6.18-4-r3k-kn02 linux-support-2.6.18-4 linux-source-2.6.18 linux-headers-2.6.18-4-k7 linux-headers-2.6.18-4-vserver linux-modules-2.6.18-4-xen-686 linux-headers-2.6.18-4-r4k-kn04 linux-headers-2.6.18-4-all-mipsel linux-headers-2.6.18-4-vserver-k7 linux-headers-2.6.18-4-r3k-kn02 linux-headers-2.6.18-4-all-sparc linux-headers-2.6.18-4-rpc linux-headers-2.6.18-4-r5k-cobalt xen-linux-system-2.6.18-4-xen-686 linux-headers-2.6.18-4-sparc64-smp linux-image-2.6.18-4-s390 linux-image-2.6.18-4-486 linux-headers-2.6.18-4-vserver-powerpc64 linux-image-2.6.18-4-r4k-kn04 linux-headers-2.6.18-4-r5k-ip32 linux-image-2.6.18-4-iop32x linux-headers-2.6.18-4-all-mips linux-headers-2.6.18-4-ixp4xx linux-image-2.6.18-4-parisc-smp linux-headers-2.6.18-4-s390 linux-headers-2.6.18-4-vserver-powerpc linux-image-2.6.18-4-vserver-686 linux-headers-2.6.18-4-all-hppa linux-image-2.6.18-4-parisc linux-image-2.6.18-4-vserver-amd64 linux-image-2.6.18-4-vserver-k7 linux-headers-2.6.18-4-r4k-ip22 linux-image-2.6.18-4-xen-686 linux-image-2.6.18-4-r5k-ip32 linux-headers-2.6.18-4-sparc32 linux-image-2.6.18-4-r4k-ip22 linux-patch-debian-2.6.18 linux-headers-2.6.18-4-powerpc-smp linux-headers-2.6.18-4-alpha-smp linux-tree-2.6.18 xen-linux-system-2.6.18-4-xen-vserver-amd64 linux-image-2.6.18-4-k7 linux-image-2.6.18-4-qemu linux-headers-2.6.18-4-qemu linux-headers-2.6.18-4-xen linux-headers-2.6.18-4-alpha-generic linux-headers-2.6.18-4-parisc linux-image-2.6.18-4-amd64 linux-headers-2.6.18-4-prep linux-image-2.6.18-4-itanium linux-image-2.6.18-4-xen-amd64 linux-headers-2.6.18-4-486 linux-headers-2.6.18-4-all-arm linux-image-2.6.18-4-atari
Architecture: source powerpc all
Version: 2.6.18.dfsg.1-9
Distribution: unstable
Urgency: low
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Bastian Blank <waldi@debian.org>
Description: 
 linux-doc-2.6.18 - Linux kernel specific documentation for version 2.6.18
 linux-headers-2.6.18-4 - Common header files for Linux 2.6.18
 linux-headers-2.6.18-4-all - All header files for Linux 2.6.18
 linux-headers-2.6.18-4-all-powerpc - All header files for Linux 2.6.18
 linux-headers-2.6.18-4-powerpc - Header files for Linux 2.6.18 on uniprocessor 32-bit PowerPC
 linux-headers-2.6.18-4-powerpc-miboot - Header files for Linux 2.6.18 on 32-bit PowerPC for miboot floppy
 linux-headers-2.6.18-4-powerpc-smp - Header files for Linux 2.6.18 on multiprocessor 32-bit PowerPC
 linux-headers-2.6.18-4-powerpc64 - Header files for Linux 2.6.18 on 64-bit PowerPC
 linux-headers-2.6.18-4-prep - Header files for Linux 2.6.18 on PReP PowerPC
 linux-headers-2.6.18-4-vserver - Common header files for Linux 2.6.18
 linux-headers-2.6.18-4-vserver-powerpc - Header files for Linux 2.6.18 on uniprocessor 32-bit PowerPC
 linux-headers-2.6.18-4-vserver-powerpc64 - Header files for Linux 2.6.18 on 64-bit PowerPC
 linux-image-2.6.18-4-powerpc - Linux 2.6.18 image on uniprocessor 32-bit PowerPC
 linux-image-2.6.18-4-powerpc-miboot - Linux 2.6.18 image on 32-bit PowerPC for miboot floppy
 linux-image-2.6.18-4-powerpc-smp - Linux 2.6.18 image on multiprocessor 32-bit PowerPC
 linux-image-2.6.18-4-powerpc64 - Linux 2.6.18 image on 64-bit PowerPC
 linux-image-2.6.18-4-prep - Linux 2.6.18 image on PReP PowerPC
 linux-image-2.6.18-4-vserver-powerpc - Linux 2.6.18 image on uniprocessor 32-bit PowerPC
 linux-image-2.6.18-4-vserver-powerpc64 - Linux 2.6.18 image on 64-bit PowerPC
 linux-manual-2.6.18 - Linux kernel API manual pages for version 2.6.18
 linux-patch-debian-2.6.18 - Debian patches to version 2.6.18 of the Linux kernel
 linux-source-2.6.18 - Linux kernel source for version 2.6.18 with Debian patches
 linux-support-2.6.18-4 - Support files for Linux 2.6.18
 linux-tree-2.6.18 - Linux kernel source tree for building Debian kernel images
Closes: 292318 334104 350482 378542 388870 390862 391867 392592 394392 394753 400524 401006 401187 401980 402253 402475 402707 402743 402787 402812 402876 403790 404216 404447 405085 405150 405196 405203 406124 406767 407671
Changes: 
 linux-2.6 (2.6.18.dfsg.1-9) unstable; urgency=low
 .
   [ Martin Michlmayr ]
   * arm/iop32x: Enable CONFIG_IP_NF_CONNTRACK_EVENTS and _NETLINK.
   * arm/ixp4xx: Enable some more I2C sensor modules.
   * arm/ixp4xx: Enable CONFIG_USB_NET_RNDIS_HOST.
   * arm/footbridge: Enable CONFIG_NATSEMI.
   * Revert mm/msync patches because they cause filesystem corruption
     (closes: #401006, #401980, #402707) ...
   * ... and add an alternative msync patch from Hugh Dickins that
     doesn't depend on the mm changes (closes: #394392).
   * mips: provide pci_get_legacy_ide_irq needed by some IDE drivers
     (see #404950).
   * arm: Implement flush_anon_page(), which is needed for FUSE
     (closes: #402876) and possibly dm-crypt/LUKS (see #403426).
   * arm: Turn off PCI burst on the Cyber2010, otherwise X11 on
     Netwinder will crash.
   * arm/iop32x: Enable CONFIG_IEEE80211_SOFTMAC and drivers based
     on it.
   * arm/ixp4xx: Upgrade to version 0.3.1 of the IXP4xx NPE Ethernet
     driver.  This version fixes stuck connections, e.g. with scp and
     NFS (closes: #404447).
   * arm/ixp4xx: Enable CONFIG_VIDEO_CPIA_USB.
   * arm/ixp4xx: Enable CONFIG_ISCSI_TCP.
   * arm/iop32x: Likewise.
 .
   [ Bastian Blank ]
   * Bump ABI to 4.
   * Update vserver patch to 2.0.2.2-rc9. (closes: #402743, #403790)
   * Update xen patch to changeset 36186 from Fedora 2.6.18 branch.
   * i386/xen: Build only the pae version. (closes: #390862)
   * hppa: Override host type when necessary.
   * Fix tg3 reset. (closes: #405085)
 .
   [ dann frazier ]
   * Fix potential fragmentation attacks in ip6_tables (CVE-2006-4572)
   * Backport a number of fixes for the cciss driver
     - Fix a bug with 1TB disks caused by converting total_size to an int
     - Claim devices that are of the HP RAID class and have a valid cciss sig
     - Make NR_CMDS a per-controller define - most can do 1024 commands, but
       the E200 family can only support 128
     - Change the SSID on the E500 as a workaround for a firmware bug
     - Disable prefetch on the P600 controller. An ASIC bug may result in
       prefetching beyond the end of physical memory
     - Increase blk_queue_max_sectors from 512 to 2048 to increase performance
     - Map out more memor for the PCI config table, required to reach offset
       0x214 to disable DMA on the P600
     - Set a default raid level on a volume that either does not support
       reading the geometry or reports an invalid geometry for whatever reason
       to avoid problems with buggy firmware
     - Revert change that replaed XFER_READ/XFER_WRITE macros with
       h->cciss_read/h->cciss_write that caused command timeouts on older
       controllers on ia32 (closes: #402787)
   * Fix mincore hang (CVE-2006-4814)
   * ia64: turn on IOC4 modules for SGI Altix systems. Thanks to Stephane Larose
     for suggesting this.
   * Add versioned build dep on findutils to make sure the system find command
     supports the -execdir action (closes: #405150)
   * Hardcode the output of the scripts under arch/ia64/scripts as executed
     in an etch environment so that we can build out of tree modules correctly
     (closes: #392592)
   * Update unusual_devs entry for ipod to fix an eject issue (closes: #406124)
   * Re-add verify_pmtmr_rate, resolving problems seen on older K6 ASUS
     boards where the ACPI PM timer runs too fast (closes: #394753)
   * Avoid condition where /proc/swaps header may not be printed
     (closes: #292318)
   * [hppa] disable XFS until it works (closes: #350482)
 .
   [ Norbert Tretkowski ]
   * libata: handle 0xff status properly. (closes: #391867)
   * alpha: enabled CONFIG_SCSI_ARCMSR. (closes: #401187)
   * removed BROKEN_ON_SMP dependency from I2C_ELEKTOR. (closes: #402253)
 .
   [ Christian T. Steigies ]
   * m68k/atari: enable keyboard, mouse and fb drivers
   * m68k/atari: fixes for ethernec and video driver by Michael Schmitz
   * m68k/atari: fixes for scsi driver by Michael Schmitz
   * m68k/mac: fixes for mace and cuda driver by Finn Thain
   * m68k/atari: fixes for ide driver by Michael Schmitz
   * m68k/atari: fixes for ide driver by Michael Schmitz
   * m68k/atari: fixes for ethernec and atakeyb driver by Michael Schmitz, build ethernec as module
   * m68k/mac: fixes for mace and adb driver by Finn Thain
 .
   [ maximilian attems ]
   * Add stable release 2.6.18.6:
     - EBTABLES: Fix wraparounds in ebt_entries verification.
     - EBTABLES: Verify that ebt_entries have zero ->distinguisher.
     - EBTABLES: Deal with the worst-case behaviour in loop checks.
     - EBTABLES: Prevent wraparounds in checks for entry components' sizes.
     - skip data conversion in compat_sys_mount when data_page is NULL
     - bonding: incorrect bonding state reported via ioctl
     - x86-64: Mark rdtsc as sync only for netburst, not for core2
       (closes: #406767)
     - dm crypt: Fix data corruption with dm-crypt over RAID5 (closes: #402812)
     - forcedeth: Disable INTx when enabling MSI in forcedeth
     - PKT_SCHED act_gact: division by zero
     - XFRM: Use output device disable_xfrm for forwarded packets
     - IPSEC: Fix inetpeer leak in ipv4 xfrm dst entries.
     - V4L: Fix broken TUNER_LG_NTSC_TAPE radio support
     - m32r: make userspace headers platform-independent
     - IrDA: Incorrect TTP header reservation
     - SUNHME: Fix for sunhme failures on x86
     - Bluetooth: Add packet size checks for CAPI messages (CVE-2006-6106)
     - softmac: remove netif_tx_disable when scanning
     - DVB: lgdt330x: fix signal / lock status detection bug
     - dm snapshot: fix freeing pending exception
     - NET_SCHED: policer: restore compatibility with old iproute binaries
     - NETFILTER: ip_tables: revision support for compat code
     - ARM: Add sys_*at syscalls
     - ieee1394: ohci1394: add PPC_PMAC platform code to driver probe
     - softirq: remove BUG_ONs which can incorrectly trigger
   * Hand-picked from stable release 2.6.16.30:
     - [PPPOE]: Advertise PPPoE MTU
   * Hand-picked from stable release 2.6.16.31:
     - [NETFILTER]: Fix ip6_tables extension header bypass bug (CVE-2006-4572)
     - fix RARP ic_servaddr breakage
   * Hand-picked from stable release 2.6.16.32:
     - drivers/telephony/ixj: fix an array overrun
     - flush D-cache in failure path
   * Hand-picked from stable release 2.6.16.33:
     - Add new PHY to sis900 supported list
     - ipmi_si_intf.c: fix "&& 0xff" typos
     - drivers/scsi/psi240i.c: fix an array overrun
   * Hand-picked from stable release 2.6.16.34:
     - [IPX]: Annotate and fix IPX checksum
     - [IGMP]: Fix IGMPV3_EXP() normalization bit shift value.
   * Hand-picked from stable release 2.6.16.35:
     - sgiioc4: Disable module unload
     - Fix a masking bug in the 6pack driver.
     - drivers/usb/input/ati_remote.c: fix cut'n'paste error
     - proper flags type of spin_lock_irqsave()
   * Hand-picked from stable release 2.6.16.37:
     - [CRYPTO] sha512: Fix sha384 block size
     - [SCSI] gdth: Fix && typos
     - Fix SUNRPC wakeup/execute race condition
   * Enable DEBUG_FS for usbmon in generic config. Don't disable it on alpha,
     amd64, hppa and ia64. (closes: 378542)
   * Backport a number of upstream fixes for the r8169 driver, needed for
     network performance (closes: 388870, 400524)
     - r8169: more alignment for the 0x8168
     - r8169: phy program update
     - r8169: more magic during initialization of the hardware
     - r8169: perform a PHY reset before any other operation at boot time
     - r8169: Fix iteration variable sign
     - r8169: remove extraneous Cmd{Tx/Rx}Enb write
   * sound: hda: detect ALC883 on MSI K9A Platinum motherboards (MS-7280)
     patch from Leonard Norrgard <leonard.norrgard@refactor.fi>
   * tulip: Add i386 specific patch to remove duplicate pci ids.
     Thanks Jurij Smakov <jurij@wooyd.org> (closes: #334104, #405203)
   * amd64, i386: Disable SK98LIN as SKGE is the modern capable driver.
     (closes: 405196)
   * Backout net-bcm43xx_netdev_watchdog.patch and push 2.6.18.2 fix.
     (closes: 402475)
 .
   [ Jurij Smakov ]
   * Add bugfix/sparc/isa-dev-no-reg.patch to make sure that
     isa_dev_get_resource() can deal with devices which do not have a 'reg'
     PROM property. Failure to handle such devices properly resulted in an
     oops during boot on Netra X1. Thanks to Richard Mortimer for debugging
     and patch. (closes: #404216)
   * Add bugfix/sparc/ehci-hub-contol-alignment.patch to prevent unaligned
     memory accesses in ehci-hub-control() by adding an alignment attribute
     to the tbuf array declaration. Thanks to David Miller for the patch.
 .
   [ Sven Luther ]
   * [powerpc] Enable CONFIG_PMAC_BACKLIGHT_LEGACY (Closes: #407671).
Files: 
 49d7b7efb8fdbd5934d540326511d039 5668 devel optional linux-2.6_2.6.18.dfsg.1-9.dsc
 6a1ab0948d6b5b453ea0fce0fcc29060 52225460 devel optional linux-2.6_2.6.18.dfsg.1.orig.tar.gz
 f9b4ce9c8858e60bff8df61320979058 1751644 devel optional linux-2.6_2.6.18.dfsg.1-9.diff.gz
 361727680d344dd0f54395ff0559c2d9 3599818 doc optional linux-doc-2.6.18_2.6.18.dfsg.1-9_all.deb
 d64023d9a6dcd48052ade816e83ac6b5 1077570 doc optional linux-manual-2.6.18_2.6.18.dfsg.1-9_all.deb
 c137d1ae26a25ed5abbc80ed7ed08a97 1381068 devel optional linux-patch-debian-2.6.18_2.6.18.dfsg.1-9_all.deb
 42bb1cfb596bd6943f7b470bad91a16a 41405074 devel optional linux-source-2.6.18_2.6.18.dfsg.1-9_all.deb
 ff81d2e0076a38e8c138ec6e6b8cdcbe 256914 devel optional linux-support-2.6.18-4_2.6.18.dfsg.1-9_all.deb
 523eedfb16eea3d54e4aadd39b5bea15 46704 devel optional linux-tree-2.6.18_2.6.18.dfsg.1-9_all.deb
 009c7593a4d7a7fdc920d03ac9f5063d 46324 devel optional linux-headers-2.6.18-4-all_2.6.18.dfsg.1-9_powerpc.deb
 c081769c0ee34f178bbcf295ae680334 46362 devel optional linux-headers-2.6.18-4-all-powerpc_2.6.18.dfsg.1-9_powerpc.deb
 7bfef65fb41af53c65bf04b49acb2e76 3384936 devel optional linux-headers-2.6.18-4_2.6.18.dfsg.1-9_powerpc.deb
 31802301a891fa8ca04c8243ebacb513 16624056 admin optional linux-image-2.6.18-4-powerpc_2.6.18.dfsg.1-9_powerpc.deb
 4d0567e8930f6f161aeb194bfa290c7f 244466 devel optional linux-headers-2.6.18-4-powerpc_2.6.18.dfsg.1-9_powerpc.deb
 7ca5ded0ed70b95e7e47b72d84574714 16962266 admin optional linux-image-2.6.18-4-powerpc-smp_2.6.18.dfsg.1-9_powerpc.deb
 3702c2d53014a43159727d028381e099 245074 devel optional linux-headers-2.6.18-4-powerpc-smp_2.6.18.dfsg.1-9_powerpc.deb
 7d738536a29475b610bd1ce813cf4162 15153182 admin optional linux-image-2.6.18-4-powerpc-miboot_2.6.18.dfsg.1-9_powerpc.deb
 5309f291ed7d7cfc4907a496fd69fe16 221424 devel optional linux-headers-2.6.18-4-powerpc-miboot_2.6.18.dfsg.1-9_powerpc.deb
 04ba8c1055666bbb7208634740e85f46 18286116 admin optional linux-image-2.6.18-4-powerpc64_2.6.18.dfsg.1-9_powerpc.deb
 5e79d913194cd37d829e42e4c614e46d 245508 devel optional linux-headers-2.6.18-4-powerpc64_2.6.18.dfsg.1-9_powerpc.deb
 ecd6445553c674876f4b3fe8e4b5182f 16397570 admin optional linux-image-2.6.18-4-prep_2.6.18.dfsg.1-9_powerpc.deb
 ea551ce3247794bfd5e54eb03b3d4ec8 238890 devel optional linux-headers-2.6.18-4-prep_2.6.18.dfsg.1-9_powerpc.deb
 382551eae1580ce294f11683a1ae5026 3407174 devel optional linux-headers-2.6.18-4-vserver_2.6.18.dfsg.1-9_powerpc.deb
 28b8bb4e11aa5c8100571967fc5f6d48 17002466 admin optional linux-image-2.6.18-4-vserver-powerpc_2.6.18.dfsg.1-9_powerpc.deb
 9ddd8711a8d0a5db35abd16ce843107e 245292 devel optional linux-headers-2.6.18-4-vserver-powerpc_2.6.18.dfsg.1-9_powerpc.deb
 a905785bc4181069af71222c60fce608 18340762 admin optional linux-image-2.6.18-4-vserver-powerpc64_2.6.18.dfsg.1-9_powerpc.deb
 d1a9db2cf82babebaadbd8f2631e9edb 245790 devel optional linux-headers-2.6.18-4-vserver-powerpc64_2.6.18.dfsg.1-9_powerpc.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iEYEARECAAYFAkW3a90ACgkQLkAIIn9ODhGAYQCfeM36zDQjC4xPmsvT7rmEl0tl
BJwAn0yGab2sjAJQTofYGhHq8ZT4TZLs
=SOBi
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: