[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#376912: marked as done (linux-image-2.6.17-1-k7: SAA7146 fails with "has no release callback")

Your message dated Tue, 3 Oct 2006 11:27:44 +0200
with message-id <20061003092744.GB25814@wavehammer.waldi.eu.org>
and subject line Bug#376912: Can be closed
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: linux-image-2.6.17-1-k7
Version: 2.6.17-2
Severity: normal

With linux-image-2.6.17-1-k7 the module SAA7146 cannot be loaded
or initialized, it fails with the following error message
during bootup:

--------------------------- cut-----------------------------------
stradis 0000:00:0b.0: 0: SDM2xx found
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 193
videodev: "SAA7146A" has no release callback. Please fix your driver for
proper 
sysfs support, see http://lwn.net/Articles/36850/
i2c setup read timeout
i2c read timeout
i2c setup read timeout
i2c read timeout
i2c setup read timeout
i2c read timeout
....
i2c setup read timeout
i2c read timeout
saa7146: register extension 'budget_av'.
....
--------------------------- cut-----------------------------------

With linux-image-2.6.15-1-k7 it looks like this (where it is
working like expected):

--------------------------- cut-----------------------------------
....
saa7146: register extension 'budget_av'.
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 209
saa7146: found saa7146 @ mem f8d6ee00 (revision 1, irq 209)
(0x153b,0x1157).
DVB: registering new adapter (Terratec Cinergy 1200 DVB-T).
adapter failed MAC signature check
encoded MAC from EEPROM was
ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
budget-av: ci interface initialised.
KNC1-0: MAC addr = 00:0a:ac:01:ac:0b
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
....
--------------------------- cut-----------------------------------

lspci shows the following output concerning the DVB-T adapter:

--------------------------- cut-----------------------------------
00:0b.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
        Subsystem: TERRATEC Electronic GmbH Unknown device 1157
        Flags: bus master, medium devsel, latency 32, IRQ 193
        Memory at dfffde00 (32-bit, non-prefetchable)
	[size=512]
--------------------------- cut-----------------------------------

Please let me know if you need further information.

Kind regards, Joerg.
		

-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-1-k7
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages linux-image-2.6.17-1-k7 depends on:
ii  module-init-tools             3.2.2-3    tools for managing Linux kernel mo
ii  yaird [linux-initramfs-tool]  0.0.12-15  Yet Another mkInitRD

Versions of packages linux-image-2.6.17-1-k7 recommends:
ii  libc6-i686                    2.3.6-15   GNU C Library: Shared libraries [i

-- debconf information:
  linux-image-2.6.17-1-k7/postinst/bootloader-error-2.6.17-1-k7:
  linux-image-2.6.17-1-k7/prerm/removing-running-kernel-2.6.17-1-k7: true
  linux-image-2.6.17-1-k7/postinst/kimage-is-a-directory:
  linux-image-2.6.17-1-k7/preinst/bootloader-initrd-2.6.17-1-k7: true
  linux-image-2.6.17-1-k7/postinst/old-dir-initrd-link-2.6.17-1-k7: true
  linux-image-2.6.17-1-k7/preinst/abort-overwrite-2.6.17-1-k7:
  linux-image-2.6.17-1-k7/preinst/initrd-2.6.17-1-k7:
  linux-image-2.6.17-1-k7/preinst/failed-to-move-modules-2.6.17-1-k7:
  linux-image-2.6.17-1-k7/postinst/depmod-error-initrd-2.6.17-1-k7: false
  linux-image-2.6.17-1-k7/postinst/old-initrd-link-2.6.17-1-k7: true
  linux-image-2.6.17-1-k7/postinst/create-kimage-link-2.6.17-1-k7: true
  linux-image-2.6.17-1-k7/preinst/already-running-this-2.6.17-1-k7:
  linux-image-2.6.17-1-k7/preinst/lilo-has-ramdisk:
  linux-image-2.6.17-1-k7/preinst/elilo-initrd-2.6.17-1-k7: true
  linux-image-2.6.17-1-k7/preinst/overwriting-modules-2.6.17-1-k7: true
  linux-image-2.6.17-1-k7/postinst/old-system-map-link-2.6.17-1-k7: true
  linux-image-2.6.17-1-k7/preinst/abort-install-2.6.17-1-k7:
  linux-image-2.6.17-1-k7/prerm/would-invalidate-boot-loader-2.6.17-1-k7: true
  linux-image-2.6.17-1-k7/postinst/bootloader-test-error-2.6.17-1-k7:
  linux-image-2.6.17-1-k7/preinst/lilo-initrd-2.6.17-1-k7: true
  linux-image-2.6.17-1-k7/postinst/depmod-error-2.6.17-1-k7: false

--- End Message ---
--- Begin Message --- 
Version: 2.6.18-1

On Tue, Oct 03, 2006 at 10:47:54AM +0200, Joerg Morbitzer wrote:
> DVB-T tuner works fine again with linux-image-2.6.18, so this bug can be 
> closed.

Closing in request. Thank you for your help.

Bastian

-- 
But Captain -- the engines can't take this much longer!

--- End Message ---
Reply to: