Bug#324595: Further info
This has also been happening to me quite frequently for sometime now.
Any ideas of a workaround/fix?
Alan
Bootdata ok (command line is root=/dev/sda5 ro console=tty0 )
Linux version 2.6.15-1-amd64-k8 (Debian 2.6.15-8) (waldi@debian.org) (gcc version 4.0.3 20060304 (prerelease) (Debian 4.0.2-10)) #2 Tue Mar 7 06:53:26 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 VIAK8T ) @ 0x00000000000f7420
ACPI: RSDT (v001 VIAK8T AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3000
ACPI: FADT (v001 VIAK8T AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040
ACPI: BOOT (v001 VIAK8T AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff7d40
ACPI: MADT (v001 VIAK8T AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff7d80
ACPI: DSDT (v001 VIAK8T AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
On node 0 totalpages: 257693
DMA zone: 3188 pages, LIFO batch:0
DMA32 zone: 254505 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Checking aperture...
CPU 0: aperture @ e0000000 size 128 MB
Built 1 zonelists
Kernel command line: root=/dev/sda5 ro console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 2451.821 MHz processor.
time.c: Using PIT/TSC based timekeeping.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 1023924k/1048512k available (1704k kernel code, 23928k reserved, 738k data, 148k init)
Calibrating delay using timer specific routine.. 4911.36 BogoMIPS (lpj=2455681)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) 64 Processor 3700+ stepping 0a
Using local APIC timer interrupts.
Detected 12.769 MHz APIC timer.
testing NMI watchdog ... OK.
checking if image is initramfs... it is
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 *12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *11
ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0C01
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0400
pnp: PnP ACPI: found 10 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 128M @ 0xe0000000
PCI-DMA: Disabling IOMMU.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:00' and the driver 'system'
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
pnp: 00:01: ioport range 0x5000-0x500f has been reserved
pnp: match found with the PnP device '00:02' and the driver 'system'
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: e8000000-eaffffff
PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
Simple Boot Flag at 0x37 set to 0x1
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1142536190.507:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
pnp: the driver 'i8042 kbd' has been registered
pnp: the driver 'i8042 aux' has been registered
pnp: the driver 'i8042 kbd' has been unregistered
pnp: the driver 'i8042 aux' has been unregistered
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:08' and the driver 'serial'
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
usbmon: debugfs is not available
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI wakeup devices:
PCI0 USB0 USB1 USB2 USB3 USB4 USB5 USB6 AC97 UAR1
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 148k freed
VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.13
Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
Copyright (c) 2004 Red Hat Inc.
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 22 (level, low) -> IRQ 16
PCI: Via IRQ fixup for 0000:00:0e.0, from 10 to 0
eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
eth0: Ethernet Address: 00:50:8D:5E:93:FE
SCSI subsystem initialized
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
USB Universal Host Controller Interface driver v2.3
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 11, using IRQ 20
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
libata version 1.20 loaded.
sata_via 0000:00:0f.0: version 1.1
ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 1
sata_via 0000:00:0f.0: routed to hard irq line 1
ata1: SATA max UDMA/133 cmd 0xB400 ctl 0xB802 bmdma 0xC400 irq 17
ata2: SATA max UDMA/133 cmd 0xBC00 ctl 0xC002 bmdma 0xC408 irq 17
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:407f
ata1: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_via
hda: WDC WD1200JB-75CRA0, ATA DISK drive
ata2: no device found (phy stat 00000000)
scsi1 : sata_via
Vendor: ATA Model: Maxtor 7B300S0 Rev: BANC
Type: Direct-Access ANSI SCSI revision: 05
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST GCE-8523B, ATAPI CD/DVD-ROM drive
hdd: SONY DVD-ROM DDU1613, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:00:10.0, from 5 to 2
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 18, io base 0x0000d000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:00:10.1, from 5 to 2
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 18, io base 0x0000d400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 2
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 18, io base 0x0000d800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 2
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 18, io base 0x0000dc00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:00:10.4, from 11 to 2
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: irq 18, io mem 0xeb023000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: Attached scsi disk sda
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-2: new full speed USB device using uhci_hcd and address 3
pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
usb 2-1: new full speed USB device using uhci_hcd and address 2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 234375000 sectors (120000 MB)
native capacity is 234441648 sectors (120034 MB)
hda: Host Protected Area disabled.
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pegasus 1-2:1.0: setup Pegasus II specific registers
pegasus 1-2:1.0: eth1, D-Link DSB-650TX, 00:50:ba:82:50:45
usbcore: registered new driver pegasus
usb 2-1.1: new full speed USB device using uhci_hcd and address 3
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:09' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
input: PC Speaker as /class/input/input0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hub 2-1.1:1.0: USB hub found
hub 2-1.1:1.0: 3 ports detected
usb 2-1.2: new low speed USB device using uhci_hcd and address 4
usb 2-1.1.1: new full speed USB device using uhci_hcd and address 5
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 16
PCI: Via IRQ fixup for 0000:00:11.5, from 11 to 0
PCI: Setting latency timer of device 0000:00:11.5 to 64
usbcore: registered new driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1.2
drivers/usb/input/hid-core.c: timeout initializing reports
input: Silitek Gateway Generic USB Hub as /class/input/input2
input: USB HID v1.10 Keyboard [Silitek Gateway Generic USB Hub] on usb-0000:00:10.1-1.1.1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Adding 9767480k swap on /dev/sda8. Priority:-1 extents:1 across:9767480k
EXT3 FS on sda5, internal journal
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x2 (1500 mV)
powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x6 (1400 mV)
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa (1300 mV)
powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe (1200 mV)
powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
cpu_init done, current fid 0x10, vid 0x2
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.25 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs error (device hda1): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows.
NTFS volume version 3.1.
NTFS-fs error (device sda1): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows.
NTFS-fs warning (device sda9): is_boot_sector_ntfs(): Invalid boot sector checksum.
NTFS-fs error (device sda9): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device sda9): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device sda9): ntfs_fill_super(): Not an NTFS volume.
Velocity is AUTO mode
eth0: Link autonegation speed 100M bps full duplex
lp0: using parport0 (interrupt-driven).
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
general protection fault: 0000 [1]
CPU 0
Modules linked in: binfmt_misc ipv6 lp nfs lockd nfs_acl sunrpc vfat fat nls_utf8 ntfs cpufreq_userspace cpufreq_powersave snd_seq_virmidi snd_seq_midi_emul powernow_k8 freq_table cpuid ide_generic snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq usbhid snd_via82xx gameport snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd psmouse floppy i2c_viapro pcspkr i2c_core parport_pc soundcore serio_raw parport shpchp pci_hotplug ide_disk ide_cd cdrom joydev evdev pegasus mii ext3 jbd mbcache sd_mod ehci_hcd sata_via via82cxxx uhci_hcd generic ide_core libata scsi_mod via_velocity crc_ccitt thermal processor fan
Pid: 6830, comm: syslogd Not tainted 2.6.15-1-amd64-k8 #2
RIP: 0010:[<ffffffff80249243>] <ffffffff80249243>{datagram_poll+68}
RSP: 0018:ffff81003ee6dde8 EFLAGS: 00010246
RAX: ffff81003e4c3170 RBX: ffff81003e4c3080 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff81003f875480
RBP: ffff81003f875480 R08: 0000000000000003 R09: ffff81003e73a380
R10: 000000000001f6c8 R11: ffffffff802491ff R12: 0000000000000000
R13: 0000000000000001 R14: ffff81003ee6df08 R15: 0000000000000001
FS: 00002aaaaae01ae0(0000) GS:ffffffff803bd800(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000005cb1f0 CR3: 000000003d733000 CR4: 00000000000006e0
Process syslogd (pid: 6830, threadinfo ffff81003ee6c000, task ffff81003e5355b0)
Stack: 0000000000000300 ffffffff80175601 ffff81003ee6df58 ffff81003ee6df40
0000000000000000 7fffffffffffffff ffff81003b6ca318 ffff81003b6ca320
ffff81003b6ca328 ffff81003b6ca308
Call Trace:<ffffffff80175601>{do_select+663} <ffffffff801752b1>{__pollwait+0}
<ffffffff8012febd>{do_setitimer+278} <ffffffff801759ca>{sys_select+563}
<ffffffff8010e4ba>{system_call+126}
Code: 89 f0 83 c8 10 83 e2 03 80 fa 03 0f 44 f0 48 8d 83 88 00 00
RIP <ffffffff80249243>{datagram_poll+68} RSP <ffff81003ee6dde8>
<1>Unable to handle kernel paging request at ffffff80801b8a3e RIP:
[<ffffff80801b8a3e>]
PGD 103027 PUD 0
Oops: 0010 [2]
CPU 0
Modules linked in: binfmt_misc ipv6 lp nfs lockd nfs_acl sunrpc vfat fat nls_utf8 ntfs cpufreq_userspace cpufreq_powersave snd_seq_virmidi snd_seq_midi_emul powernow_k8 freq_table cpuid ide_generic snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq usbhid snd_via82xx gameport snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd psmouse floppy i2c_viapro pcspkr i2c_core parport_pc soundcore serio_raw parport shpchp pci_hotplug ide_disk ide_cd cdrom joydev evdev pegasus mii ext3 jbd mbcache sd_mod ehci_hcd sata_via via82cxxx uhci_hcd generic ide_core libata scsi_mod via_velocity crc_ccitt thermal processor fan
Pid: 8645, comm: dpkg Not tainted 2.6.15-1-amd64-k8 #2
RIP: 0010:[<ffffff80801b8a3e>] [<ffffff80801b8a3e>]
RSP: 0018:ffff81002bd9fee0 EFLAGS: 00010283
RAX: ffffffff80319740 RBX: 0000000000022000 RCX: ffff81003b7eae78
RDX: 0000000000002547 RSI: 0000000000000022 RDI: 0000000000000022
RBP: ffff81003e2643c0 R08: ffff81002bd9fef8 R09: 0000000000000000
R10: ffff81003b7eae78 R11: ffff810038f86348 R12: ffff81003e2643c0
R13: 000000000201e000 R14: 0000000000000022 R15: 0000000002040000
FS: 00002aaaaae026d0(0000) GS:ffffffff803bd800(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffff80801b8a3e CR3: 000000003ce91000 CR4: 00000000000006e0
Process dpkg (pid: 8645, threadinfo ffff81002bd9e000, task ffff81003e168fe0)
Stack: ffffffff8015ac34 000000000000201e 000004ca7d26aeca ffff81003b7eae78
ffff81003b7eae88 ffff81003b7eae48 000000000201e000 0000000000022000
ffff81003e2643c0 0000000002041000
Call Trace:<ffffffff8015ac34>{do_brk+370} <ffffffff8015ae86>{sys_brk+212}
<ffffffff8010e4ba>{system_call+126}
Code: Bad RIP value.
RIP [<ffffff80801b8a3e>] RSP <ffff81002bd9fee0>
CR2: ffffff80801b8a3e
<1>Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff880a0e57>{:jbd:journal_commit_transaction+658}
PGD 396b5067 PUD 2d5dc067 PMD 0
Oops: 0000 [3]
CPU 0
Modules linked in: binfmt_misc ipv6 lp nfs lockd nfs_acl sunrpc vfat fat nls_utf8 ntfs cpufreq_userspace cpufreq_powersave snd_seq_virmidi snd_seq_midi_emul powernow_k8 freq_table cpuid ide_generic snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq usbhid snd_via82xx gameport snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd psmouse floppy i2c_viapro pcspkr i2c_core parport_pc soundcore serio_raw parport shpchp pci_hotplug ide_disk ide_cd cdrom joydev evdev pegasus mii ext3 jbd mbcache sd_mod ehci_hcd sata_via via82cxxx uhci_hcd generic ide_core libata scsi_mod via_velocity crc_ccitt thermal processor fan
Pid: 3886, comm: kjournald Not tainted 2.6.15-1-amd64-k8 #2
RIP: 0010:[<ffffffff880a0e57>] <ffffffff880a0e57>{:jbd:journal_commit_transaction+658}
RSP: 0018:ffff81003e78de28 EFLAGS: 00010282
RAX: ffff810012a9beb0 RBX: 0000000000000000 RCX: ffff810035710178
RDX: 0000000000000061 RSI: ffff8100195ddf10 RDI: ffff81003ea395c0
RBP: ffff810012a9beb0 R08: ffff81003e245810 R09: 0000000000000060
R10: ffff810014a59450 R11: ffff810014a594a8 R12: ffff810035710140
R13: ffff81003e034a00 R14: 0000000000000000 R15: 0000000000000002
FS: 00002aaaab0bc6d0(0000) GS:ffffffff803bd800(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 000000002c337000 CR4: 00000000000006e0
Process kjournald (pid: 3886, threadinfo ffff81003e78c000, task ffff81003e9327d0)
Stack: ffff81003e0a4000 ffff81003e932808 000004cb9eea98e6 ffffffff802a6c81
ffff81003e78deb8 0000000000000046 000000000000126d ffff81003e9327d0
ffffffff802fe900 ffffffff802fe900
Call Trace:<ffffffff802a6c81>{thread_return+0} <ffffffff880a3850>{:jbd:kjournald+186}
<ffffffff880a32f4>{:jbd:commit_timeout+0} <ffffffff8013d87c>{autoremove_wake_function+0}
<ffffffff8012f1a3>{do_exit+2672} <ffffffff8010ef9a>{child_rip+8}
<ffffffff880a3796>{:jbd:kjournald+0} <ffffffff8010ef92>{child_rip+0}
Code: 8b 03 89 c0 a8 04 74 29 48 89 de 4c 89 ef e8 42 fd ff ff 85
RIP <ffffffff880a0e57>{:jbd:journal_commit_transaction+658} RSP <ffff81003e78de28>
CR2: 0000000000000000
Reply to: