[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#355204: marked as done (initramfs-tools: fails on ia64)

Your message dated Sun, 12 Mar 2006 09:55:54 -0700
with message-id <1142182554.8304.39.camel@localhost>
and subject line sorry - duplicate
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: initramfs-tools
Version: 0.53
Severity: important

NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 336kB freed
Loading, please wait...
Begin: Loading essential driversSCSI subsystem initialized
... ...
tg3.c:v3.47 (Dec 28, 2005)
GSI 29 (level, low) -> CPU 1 (0x0100) vector 52
ACPI: PCI Interrupt 0000:20:02.0[A] -> GSI 29 (level, low) -> IRQ 52
eth0: Tigon3 [partno(BCM95700A6) rev 0105 PHY(5701)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:30:6e:f3:0e:f6
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
eth0: dma_rwctrl[76ff2d0f]
Done.
Begin: Running /scripts/init-premount ...
eval:ACPI: Thermal Zone [THM0] (27 C)
 1: array_acpid~=: not found
eval: 1: array_udev-helper=udev: not found
eval: 1: Syntax error: Bad substitutiousbcore: registered new driver usbfs
n
eval: 1: arrausbcore: registered new driver hub
y_acpid~=: not fFusion MPT base driver 3.03.04
ound
eval: 1: SCopyright (c) 1999-2005 LSI Logic Corporation
yntax error: BadGSI 16 (level, low) -> CPU 0 (0x0000) vector 53
 substitution
eACPI: PCI Interrupt 0000:00:01.0[A] -> val: 1: array_udGSI 16 (level, low) -> IRQ 53
ev-helper=: not ohci_hcd 0000:00:01.0: OHCI Host Controller
found
ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:01.0: irq 53, io mem 0x80023000
Fusion MPT SPI Host driver 3.03.04
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
GSI 17 (level, low) -> CPU 1 (0x0100) vector 54
ACPI: PCI Interrupt 0000:00:01.1[B] -> GSI 17 (level, low) -> IRQ 54
ohci_hcd 0000:00:01.1: OHCI Host Controller
ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:01.1: irq 54, io mem 0x80022000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 18 (level, low) -> CPU 0 (0x0000) vector 55
ACPI: PCI Interrupt 0000:00:01.2[C] -> GSI 18 (level, low) -> IRQ 55
ehci_hcd 0000:00:01.2: EHCI Host Controller
ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:01.2: irq 55, io mem 0x80021000
ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
GSI 27 (level, low) -> CPU 1 (0x0100) vector 56
ACPI: PCI Interrupt 0000:20:01.0[A] -> <6>GSI 20 (level, low) -> CPU 0 (0x0000) vector 57
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 57
e100: eth1: e100_probe: addr 0x80020000, irq 57, MAC addr 00:30:6E:F3:BE:26
CMD649: IDE controller at PCI slot 0000:00:02.0
GSI 21 (level, low) -> CPU 1 (0x0100) vector 58
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 21 (level, low) -> IRQ 58
CMD649: chipset revision 2
CMD649: 100% native mode on irq 58
    ide0: BM-DMA at 0x0d40-0x0d47, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x0d48-0x0d4f, BIOS settings: hdc:pio, hdd:pio
GSI 27 (level, low) -> IRQ 56
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
hda: DV-28E-C, ATAPI CD/DVD-ROM drive
ide0 at 0xd58-0xd5f,0xd66 on irq 58
scsi0 : ioc0: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=56
  Vendor: HP 73.4G  Model: MAS3735NC         Rev: HPC3
  Type:   Direct-Access                      ANSI SCSI revision: 03
  Vendor: HP 73.4G  Model: MAS3735NC         Rev: HPC3
  Type:   Direct-Access                      ANSI SCSI revision: 03
GSI 28 (level, low) -> CPU 0 (0x0000) vector 59
ACPI: PCI Interrupt 0000:20:01.1[B] -> GSI 28 (level, low) -> IRQ 59
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator}
scsi1 : ioc1: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=59
  Vendor: HP 73.4G  Model: MAS3735NC         Rev: HPC3
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write through
 sda:<6>hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
 sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
Uniform CD-ROM driver Revision: 3.20
SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdb: drive cache: write through
 sdb: unknown partition table
sd 0:0:1:0: Attached scsi disk sdb
SCSI device sdc: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdc: drive cache: write through
 sdc: unknown partition table
sd 1:0:2:0: Attached scsi disk sdc
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
eval: 1: array_evms~=: not found
eval: 1: array_lvm~=md: not found
eval: 1: array_md~=: not found
eval: 1: Syntax error: Bad substitution
eval: 1: array_evms~=: not found
eval: 1: Syntax error: Bad substitution
eval: 1: Syntax error: Bad substitution
eval: 1: array_lvm~=: not found
eval: 1: Syntax error: Bad substitution
eval: 1: Syntax error: Bad substitution
eval: 1: array_md~=: not found
eval: 1: Syntax error: Bad substitution
Done.
Segmentation fault
Begin: Running /scripts/local-premount ...
eval: 1: array_suspend~=: not found
eval: 1: Syntax error: Bad substitution
eval: 1: array_suspend~=: not found
eval: 1: Syntax error: Bad substitution
Done.
Usage: modprobe [-v] [-V] [-C config-file] [-n] [-i] [-q] [-b] [-o <modname>] <modname> [parameters...]
modprobe -r [-n] [-i] [-v] <modulename> ...
modprobe -l -t <dirname> [ -a <modulename> ...]
mount:
Cannot read /etc/fstab: No such file or directory
Begin: Running /scripts/log-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
mount: Mounting /root/dev on /dev/.static/dev failed: No such file or directory
Done.
mount: Mounting /sys on /root/sys failed: No such file or directory
mount: Mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init


BusyBox v1.01 (Debian 1:1.01-4) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

/bin/sh: can't access tty; job control turned off
/ #


-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: ia64
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15-1-mckinley
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages initramfs-tools depends on:
ii  busybox                       1:1.01-4   Tiny utilities for small and embed
ii  cpio                          2.6-10     GNU cpio -- a program to manage ar
ii  klibc-utils                   1.2.2-3    small statically-linked utilities 
ii  udev                          0.085-1    /dev/ and hotplug management daemo

initramfs-tools recommends no packages.

--- End Message ---
--- Begin Message --- 
sorry; this is just another occurrence of #341181.  I thought this had
been fixed for some reason[1].  I'll go ahead and close this one and
undo [1] for ia64.

[1] svn diff svn://svn.debian.org/svn/kernel -r5595:5597
-- 
dann frazier <dannf@hp.com>

--- End Message ---
Reply to: