kernel 2.6.15 for 686 can't mount root fs
I've tried to submit this bug report using "reportbug" twice, but I have
a feeling it didn't go through since I didn't get a confirmation. But
I'm hoping my report will help someone solve the "IDE mess", so here goes...
Package: kernel-image-2.6.15-686
(related packages: initramfs-tools)
Severity: serious to critical
Hardware: Compaq Armada M700 laptop
0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX
Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX
AGP bridge (rev 03)
0000:00:04.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
0000:00:04.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
0000:00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE
(rev 01)
0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB
(rev 01)
0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
0000:00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro
2E (rev 10)
0000:00:09.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet
Pro 100] (rev 09)
0000:00:09.1 Serial controller: Agere Systems LT WinModem
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage
Mobility P/M AGP 2x (rev 64)
Whenever I install kernel-image-2.6.15-686 (also with -486), the kernel
will not boot. My "old" kernel (2.6.12) still works, until I either
install splashy or reinstall that kernel (2.6.12). (So I suspect it has
something to do with initramfs-tools.) Also, this problem is not
apparent on my desktop, so it's hardware related.
It seems to not be able to find the gzip module on startup. I wrote
down the errors since all I get is BusyBox when I boot:
... some hardware detection stuff here ...
Begin: Mounting root filesystem ...
Begin: Running /scripts/local-top ...
Done.
Begin: Running /scripts/local-premount
Attempting manual resume
Done.
FATAL: Module gzip not found
mount: Mounting /dev/hda3 on /root failed: No such device
Afterwards I'm able to mount my root fs by hand (mount -t ext3), use
chroot, and run the init.d scripts to get things running at least to a
certain point. However, if I try to mount the root fs without the "-t
ext3" part, it won't mount properly.
I'm sure someone else understands better than me what's going on here.
So, if there's any other information I can provide, let me know. For
now, I'm using 2.6.12
Angelo
Reply to: