Bug#404568: linux-image-2.6.18-3-686: sata ii hard disk on via chipset appeards both as hdg and as sda
Package: linux-image-2.6.18-3-686
Version: 2.6.18-8
Severity: normal
The system has a VIA K8T890 CF chipset with two IDE, two SATA and two SATA II
JMicron JMB 363 ports. The system has a DVD burner set as master on the second
IDE interface, and a hard disk connected to the first SATA II port. The SATA II
port can be set in the BIOS to work in either IDE or AHCI mode, but the problem
appears in both cases.
The problem is that the hard disk appears both as /dev/hdg (initially) and
/dev/sda (when the SATA driver gets loaded), but accessing it via /dev/hdg
generates lots of I/O error messages, as shown in the attached dmesg (lspci and
dmesg outputs refer to the SATA II ports set to AHCI mode in the BIOS).
Passing ide2=noprobe ide3=noprobe hdg=noprobe or similar options to the kernel
(the system is set up with GRUB) has no effect, so it seems to be not possible
to disable the (non-functional) PATA acccess to the SATA II disk.
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-3-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6.18-3-686 depends on:
ii coreutils 5.97-5.2 The GNU core utilities
ii debconf [debconf-2.0] 1.5.11 Debian configuration management sy
ii initramfs-tools [linux-initra 0.85e tools for generating an initramfs
ii module-init-tools 3.3-pre3-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.18-3-686 recommends:
ii libc6-i686 2.3.6.ds1-9 GNU C Library: Shared libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.18-3-686/postinst/bootloader-error-2.6.18-3-686:
linux-image-2.6.18-3-686/postinst/old-dir-initrd-link-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/kimage-is-a-directory:
linux-image-2.6.18-3-686/preinst/elilo-initrd-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/old-system-map-link-2.6.18-3-686: true
linux-image-2.6.18-3-686/preinst/lilo-initrd-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/depmod-error-initrd-2.6.18-3-686: false
linux-image-2.6.18-3-686/preinst/bootloader-initrd-2.6.18-3-686: true
linux-image-2.6.18-3-686/prerm/removing-running-kernel-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/create-kimage-link-2.6.18-3-686: true
linux-image-2.6.18-3-686/prerm/would-invalidate-boot-loader-2.6.18-3-686: true
linux-image-2.6.18-3-686/preinst/abort-install-2.6.18-3-686:
linux-image-2.6.18-3-686/preinst/overwriting-modules-2.6.18-3-686: true
linux-image-2.6.18-3-686/preinst/initrd-2.6.18-3-686:
linux-image-2.6.18-3-686/preinst/lilo-has-ramdisk:
linux-image-2.6.18-3-686/preinst/already-running-this-2.6.18-3-686:
linux-image-2.6.18-3-686/postinst/bootloader-test-error-2.6.18-3-686:
linux-image-2.6.18-3-686/preinst/abort-overwrite-2.6.18-3-686:
linux-image-2.6.18-3-686/postinst/old-initrd-link-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/depmod-error-2.6.18-3-686: false
linux-image-2.6.18-3-686/preinst/failed-to-move-modules-2.6.18-3-686:
-- lspci output:
00:00.0 Host bridge: VIA Technologies, Inc. VT3351 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. VT3351 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. VT3351 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. VT3351 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. VT3351 Host Bridge
00:00.5 PIC: VIA Technologies, Inc. VT3351 I/O APIC Interrupt Controller
00:00.7 Host bridge: VIA Technologies, Inc. VT3351 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. [K8T890 North / VT8237 South] PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
00:03.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
00:03.1 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
00:03.2 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
00:03.3 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
00:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
02:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
02:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
06:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2)
80:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller (rev 10)
-- dmesg output:
Linux version 2.6.18-3-686 (Debian 2.6.18-8) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Sun Dec 10 19:37:06 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 262064
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32688 pages, LIFO batch:7
DMI present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f8880
ACPI: RSDT (v001 A M I OEMRSDT 0x09000619 MSFT 0x00000097) @ 0x3ffb0000
ACPI: FADT (v002 A M I OEMFACP 0x09000619 MSFT 0x00000097) @ 0x3ffb0200
ACPI: MADT (v001 A M I OEMAPIC 0x09000619 MSFT 0x00000097) @ 0x3ffb0390
ACPI: MCFG (v001 A M I OEMMCFG 0x09000619 MSFT 0x00000097) @ 0x3ffb0400
ACPI: OEMB (v001 A M I AMI_OEM 0x09000619 MSFT 0x00000097) @ 0x3ffc0040
ACPI: DSDT (v001 AS2GL AS2GL000 0x00000000 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:11 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:11 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Detected 1999.044 MHz processor.
Built 1 zonelists. Total pages: 262064
Kernel command line: root=/dev/sda2 ro ide2=noprobe ide3=noprobe
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fecc0000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1031512k/1048256k available (1543k kernel code, 16092k reserved, 574k data, 196k init, 130752k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4000.06 BogoMIPS (lpj=8000139)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3998.08 BogoMIPS (lpj=7996174)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Total of 2 processors activated (7998.15 BogoMIPS).
ENABLING IO-APIC IRQs
...TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
checking TSC synchronization across 2 CPUs:
CPU#0 had 304 usecs TSC skew, fixed it up.
CPU#1 had -304 usecs TSC skew, fixed it up.
Brought up 2 CPUs
migration_cost=189
checking if image is initramfs... it is
Freeing initrd memory: 4394k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: No mmconfig possible on 0:18
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:06:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:80)
PCI: Probing PCI hardware (bus 80)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: fc000000-feafffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: cff00000-cfffffff
PCI: Bridge: 0000:00:03.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: cfe00000-cfefffff
PCI: Bridge: 0000:00:03.2
IO window: e000-efff
MEM window: fbf00000-fbffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.3
IO window: d000-dfff
MEM window: fbe00000-fbefffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:03.0 to 64
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 35 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:03.1 to 64
ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:03.2 to 64
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 43 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:03.3 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1167134144.468:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
Allocate Port Service[0000:00:02.0:pcie02]
Allocate Port Service[0000:00:02.0:pcie03]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie01]
Allocate Port Service[0000:00:03.0:pcie02]
Allocate Port Service[0000:00:03.0:pcie03]
PCI: Setting latency timer of device 0000:00:03.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.1:pcie00]
Allocate Port Service[0000:00:03.1:pcie01]
Allocate Port Service[0000:00:03.1:pcie02]
Allocate Port Service[0000:00:03.1:pcie03]
PCI: Setting latency timer of device 0000:00:03.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.2:pcie00]
Allocate Port Service[0000:00:03.2:pcie01]
Allocate Port Service[0000:00:03.2:pcie02]
Allocate Port Service[0000:00:03.2:pcie03]
PCI: Setting latency timer of device 0000:00:03.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.3:pcie00]
Allocate Port Service[0000:00:03.3:pcie01]
Allocate Port Service[0000:00:03.3:pcie02]
Allocate Port Service[0000:00:03.3:pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Starting balanced_irq
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Time: acpi_pm clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 36 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:03:00.0 to 64
eth0: RTL8168b/8111b at 0xf8806000, 00:13:8f:df:17:ee, IRQ 66
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
JMB363: IDE controller at PCI slot 0000:02:00.1
PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 41 (level, low) -> IRQ 74
JMB363: chipset revision 2
JMB363: 100% native mode on irq 74
PCI: Setting latency timer of device 0000:02:00.1 to 64
ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:DMA, hdh:pio
Probing IDE interface ide2...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ieee1394: Initialized config rom entry `ip1394'
Probing IDE interface ide3...
hdg: ST3320620AS, ATA DISK drive
ide3 at 0xd800-0xd807,0xd482 on irq 74
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 82
PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 2
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 82, io base 0x0000b480
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 2.00 loaded.
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 90
PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 10
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 90, io base 0x0000b800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 98
PCI: VIA IRQ fixup for 0000:00:10.2, from 6 to 2
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 98, io base 0x0000b880
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 106
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 106, io base 0x0000bc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 98
PCI: VIA IRQ fixup for 0000:00:10.4, from 6 to 2
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: irq 98, io mem 0xfbdffc00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
sata_via 0000:00:0f.0: version 2.0
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 98
sata_via 0000:00:0f.0: routed to hard irq line 11
ata1: SATA max UDMA/133 cmd 0xCC00 ctl 0xC882 bmdma 0xC400 irq 98
ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xC482 bmdma 0xC408 irq 98
scsi0 : sata_via
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xCC07
scsi1 : sata_via
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xC807
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ahci 0000:02:00.0: version 2.0
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 40 (level, low) -> IRQ 114
PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 0
VP_IDE: chipset revision 7
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
PCI: Setting latency timer of device 0000:02:00.0 to 64
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ata3: SATA max UDMA/133 cmd 0xF88C8100 ctl 0x0 bmdma 0x0 irq 114
ata4: SATA max UDMA/133 cmd 0xF88C8180 ctl 0x0 bmdma 0x0 irq 114
scsi2 : ahci
hdc: PHILIPS DVDR1668P1, ATAPI CD/DVD-ROM drive
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32)
ata3.00: ata3: dev 0 multi count 16
ata3.00: configured for UDMA/133
scsi3 : ahci
ide1 at 0x170-0x177,0x376 on irq 15
ata4: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: ST3320620AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 122
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[122] MMIO=[fbdff000-fbdff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
hdg: max request size: 512KiB
hdg: status error: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error }
hdg: status error: error=0xff { DriveStatusError BadCRC UncorrectableError SectorIdNotFound TrackZeroNotFound AddrMarkNotFound }, LBAsect=281474976710655, high=16777215, low=16777215, sector=0
ide: failed opcode was: 0x27
hdg: drive not ready for command
hdg: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63
hdg: status error: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error }
hdg: status error: error=0xff { DriveStatusError BadCRC UncorrectableError SectorIdNotFound TrackZeroNotFound AddrMarkNotFound }, LBAsect=281474976710655, high=16777215, low=16777215, sector=0
ide: failed opcode was: 0xef
hdg: drive not ready for command
hdg: cache flushes supported
hdg:hdg: status error: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error }
hdg: status error: error=0xff { DriveStatusError BadCRC UncorrectableError SectorIdNotFound TrackZeroNotFound AddrMarkNotFound }, LBAsect=281474976710655, high=16777215, low=16777215, sector=0
ide: failed opcode was: unknown
hdg: DMA disabled
hdg: drive not ready for command
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
ide3: reset: master: error (0xff?); slave: failed
hdg: status error: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error }
hdg: status error: error=0xff { DriveStatusError BadCRC UncorrectableError SectorIdNotFound TrackZeroNotFound AddrMarkNotFound }, LBAsect=281474976710655, high=16777215, low=16777215, sector=0
ide: failed opcode was: unknown
hdg: drive not ready for command
sd 2:0:0:0: Attached scsi disk sda
ide3: reset: master: error (0xff?); slave: failed
end_request: I/O error, dev hdg, sector 0
Buffer I/O error on device hdg, logical block 0
end_request: I/O error, dev hdg, sector 0
Buffer I/O error on device hdg, logical block 0
unable to read partition table
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
end_request: I/O error, dev hdg, sector 625142272
Buffer I/O error on device hdg, logical block 78142784
end_request: I/O error, dev hdg, sector 625142272
Buffer I/O error on device hdg, logical block 78142784
end_request: I/O error, dev hdg, sector 625142440
Buffer I/O error on device hdg, logical block 78142805
end_request: I/O error, dev hdg, sector 625142440
Buffer I/O error on device hdg, logical block 78142805
end_request: I/O error, dev hdg, sector 625142440
Buffer I/O error on device hdg, logical block 78142805
end_request: I/O error, dev hdg, sector 625142440
Buffer I/O error on device hdg, logical block 78142805
end_request: I/O error, dev hdg, sector 625142440
Buffer I/O error on device hdg, logical block 78142805
end_request: I/O error, dev hdg, sector 625142440
Buffer I/O error on device hdg, logical block 78142805
end_request: I/O error, dev hdg, sector 625142384
end_request: I/O error, dev hdg, sector 625142432
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
Attempting manual resume
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106000000fc96]
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
end_request: I/O error, dev hdg, sector 625142272
end_request: I/O error, dev hdg, sector 625142272
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142384
end_request: I/O error, dev hdg, sector 625142432
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
input: PC Speaker as /class/input/input1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Real Time Clock Driver v1.12ac
irda_init()
NET: Registered protocol family 23
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 122
PCI: Setting latency timer of device 0000:80:01.0 to 64
input: PS2++ Logitech Mouse as /class/input/input2
ts: Compaq touchscreen protocol output
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
Adding 979956k swap on /dev/sda3. Priority:-1 extents:1 across:979956k
loop: loaded (max 8 devices)
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
r8169: eth1: link up
r8169: eth1: link up
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
end_request: I/O error, dev hdg, sector 625142272
printk: 72 messages suppressed.
Buffer I/O error on device hdg, logical block 78142784
end_request: I/O error, dev hdg, sector 625142272
Buffer I/O error on device hdg, logical block 78142784
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142384
end_request: I/O error, dev hdg, sector 625142432
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 625142440
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
end_request: I/O error, dev hdg, sector 0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
eth1: no IPv6 routers present
Reply to: