[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#264197: marked as done (kernel-image-2.6.7-1-686: Intel Ethernet Pro 100 does not work)

Your message dated Sun, 3 Dec 2006 23:19:59 -0500
with message-id <20061204041959.GA29181@doctormoo.dyndns.org>
and subject line no feedback, closing
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: kernel-image-2.6.7-1-686
Version: 2.6.7-2
Severity: important

When I switched from kernel 2.6.6 my Ethernet Pro 100 stopped working.
The kernel modules eepro100 e100 and mii are loaded but when I try to
ping my local gateway it does not respond.

Here is a snapshot of what happened right before It tried to load the
modules in 2.6.7.

--------- syslog from 2.6.7 -------------------
Aug  6 01:58:25 lust kernel: Linux Kernel Card Services
Aug  6 01:58:25 lust kernel:   options:  [pci] [cardbus] [pm]
Aug  6 01:58:25 lust kernel: PCI: Found IRQ 11 for device 0000:00:0a.0
Aug  6 01:58:25 lust kernel: Yenta: CardBus bridge found at 0000:00:0a.0 [0e11:b103]
Aug  6 01:58:25 lust kernel: Yenta: Enabling burst memory read transactions
Aug  6 01:58:25 lust kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
Aug  6 01:58:25 lust kernel: Yenta: Routing CardBus interrupts to PCI
Aug  6 01:58:25 lust kernel: Yenta TI: socket 0000:00:0a.0, mfunc 0x01271202, devctl 0x64
Aug  6 01:58:25 lust kernel: Yenta: ISA IRQ mask 0x0698, PCI irq 11
Aug  6 01:58:25 lust kernel: Socket status: 30000006
Aug  6 01:58:25 lust kernel: PCI: Found IRQ 5 for device 0000:00:11.0
Aug  6 01:58:25 lust kernel: PCI: Sharing IRQ 5 with 0000:01:00.0
Aug  6 01:58:25 lust kernel: e100: Intel(R) PRO/100 Network Driver, 3.0.18
Aug  6 01:58:25 lust kernel: e100: Copyright(c) 1999-2004 Intel Corporation
Aug  6 01:58:25 lust kernel: PCI: Found IRQ 11 for device 0000:00:12.0
Aug  6 01:58:25 lust kernel: PCI: Sharing IRQ 11 with 0000:00:07.2
Aug  6 01:58:25 lust kernel: e100: eth0: e100_probe: addr 0xf0100000, irq 11, MAC addr 00:50:8B:C0:A2:E0
Aug  6 01:58:25 lust kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
Aug  6 01:58:25 lust kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Aug  6 01:58:25 lust kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Aug  6 01:58:25 lust kernel: Real Time Clock Driver v1.12
---------------------------------------------

Here is the one from kernel 2.6.7. Notice that the something failed
regarding my IRQ 5.
-------------- syslog 2.6.7 -----------------
Aug  6 01:55:47 lust kernel: Linux Kernel Card Services
Aug  6 01:55:47 lust kernel:   options:  [pci] [cardbus] [pm]
Aug  6 01:55:47 lust kernel: PCI: Found IRQ 11 for device 0000:00:0a.0
Aug  6 01:55:47 lust kernel: Yenta: CardBus bridge found at 0000:00:0a.0 [0e11:b103]
Aug  6 01:55:47 lust kernel: Yenta: Enabling burst memory read transactions
Aug  6 01:55:47 lust kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
Aug  6 01:55:47 lust kernel: Yenta: Routing CardBus interrupts to PCI
Aug  6 01:55:47 lust kernel: Yenta TI: socket 0000:00:0a.0, mfunc 0x01271202, devctl 0x64
Aug  6 01:55:47 lust kernel: Yenta: ISA IRQ mask 0x0698, PCI irq 11
Aug  6 01:55:47 lust kernel: Socket status: 30000006
Aug  6 01:55:47 lust kernel: PCI: Found IRQ 5 for device 0000:00:11.0
Aug  6 01:55:47 lust kernel: PCI: Sharing IRQ 5 with 0000:01:00.0
Aug  6 01:55:47 lust kernel: irq 5: nobody cared!
Aug  6 01:55:47 lust kernel: Call Trace:
Aug  6 01:55:47 lust kernel:  [__report_bad_irq+42/144] __report_bad_irq+0x2a/0x90
Aug  6 01:55:47 lust kernel:  [note_interrupt+112/176] note_interrupt+0x70/0xb0
Aug  6 01:55:47 lust kernel:  [do_IRQ+288/304] do_IRQ+0x120/0x130
Aug  6 01:55:47 lust kernel:  [common_interrupt+24/32] common_interrupt+0x18/0x20
Aug  6 01:55:47 lust kernel:  [__do_softirq+46/128] __do_softirq+0x2e/0x80
Aug  6 01:55:47 lust kernel:  [do_softirq+39/48] do_softirq+0x27/0x30
Aug  6 01:55:47 lust kernel:  [do_IRQ+251/304] do_IRQ+0xfb/0x130
Aug  6 01:55:47 lust kernel:  [common_interrupt+24/32] common_interrupt+0x18/0x20
Aug  6 01:55:47 lust kernel:  [setup_irq+127/240] setup_irq+0x7f/0xf0
Aug  6 01:55:47 lust kernel:  [__crc_ethtool_op_get_sg+2643772/3896220] snd_es1938_interrupt+0x0/0x1a0 [snd_es1938]
Aug  6 01:55:47 lust kernel:  [request_irq+132/208] request_irq+0x84/0xd0
Aug  6 01:55:47 lust kernel:  [__crc_ethtool_op_get_sg+2643772/3896220] snd_es1938_interrupt+0x0/0x1a0 [snd_es1938]
Aug  6 01:55:47 lust kernel:  [__crc_ethtool_op_get_sg+2643335/3896220] snd_es1938_create+0x1db/0x390 [snd_es1938]
Aug  6 01:55:47 lust kernel:  [__crc_ethtool_op_get_sg+2643772/3896220] snd_es1938_interrupt+0x0/0x1a0 [snd_es1938]
Aug  6 01:55:47 lust kernel:  [__crc_ethtool_op_get_sg+2644532/3896220] snd_es1938_probe+0xa8/0x2a0 [snd_es1938]
Aug  6 01:55:47 lust kernel:  [dput+49/544] dput+0x31/0x220
Aug  6 01:55:47 lust kernel:  [pci_device_probe_static+82/112] pci_device_probe_static+0x52/0x70
Aug  6 01:55:47 lust kernel:  [__pci_device_probe+60/80] __pci_device_probe+0x3c/0x50
Aug  6 01:55:47 lust kernel:  [pci_device_probe+44/80] pci_device_probe+0x2c/0x50
Aug  6 01:55:47 lust kernel:  [bus_match+63/112] bus_match+0x3f/0x70
Aug  6 01:55:47 lust kernel:  [driver_attach+92/160] driver_attach+0x5c/0xa0
Aug  6 01:55:47 lust kernel:  [bus_add_driver+147/176] bus_add_driver+0x93/0xb0
Aug  6 01:55:47 lust kernel:  [driver_register+47/64] driver_register+0x2f/0x40
Aug  6 01:55:47 lust kernel:  [pci_register_driver+92/144] pci_register_driver+0x5c/0x90
Aug  6 01:55:47 lust kernel:  [__crc_ethtool_op_get_sg+1632831/3896220] alsa_card_es1938_init+0x13/0x40 [snd_es1938]
Aug  6 01:55:47 lust kernel:  [sys_init_module+256/528] sys_init_module+0x100/0x210
Aug  6 01:55:47 lust kernel:  [sysenter_past_esp+82/113] sysenter_past_esp+0x52/0x71
Aug  6 01:55:47 lust kernel: 
Aug  6 01:55:47 lust kernel: handlers:
Aug  6 01:55:47 lust kernel: [__crc_ethtool_op_get_sg+2643772/3896220] (snd_es1938_interrupt+0x0/0x1a0 [snd_es1938])
Aug  6 01:55:47 lust kernel: Disabling IRQ #5
Aug  6 01:55:47 lust kernel: e100: Intel(R) PRO/100 Network Driver, 3.0.17
Aug  6 01:55:47 lust kernel: e100: Copyright(c) 1999-2004 Intel Corporation
Aug  6 01:55:47 lust kernel: PCI: Found IRQ 11 for device 0000:00:12.0
Aug  6 01:55:47 lust kernel: PCI: Sharing IRQ 11 with 0000:00:07.2
Aug  6 01:55:47 lust kernel: e100: eth0: e100_probe: addr 0xf0100000, irq 11, MAC addr 00:50:8B:C0:A2:E0
Aug  6 01:55:47 lust kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
Aug  6 01:55:47 lust kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Aug  6 01:55:47 lust kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
---------------------------------------------

Finally here is the output of lspci for completeness.
--------------    lspci     -----------------
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
0000:00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
0000:00:11.0 Multimedia audio controller: ESS Technology ES1969 Solo-1 Audiodrive (rev 02)
0000:00:12.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
---------------------------------------------

I'm typing this from my 2.6.6 kernel because as you can see the 2.6.7
would not allow me to send the bug through the internet.

Regards,
Patrick Sodre

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (900, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.6-1-686
Locale: LANG=C, LC_CTYPE=C

Versions of packages kernel-image-2.6.7-1-686 depends on:
ii  coreutils [fileutils]         5.2.1-2    The GNU core utilities
ii  fileutils                     5.2.1-2    The GNU file management utilities 
ii  initrd-tools                  0.1.71     tools to create initrd image for p
ii  module-init-tools             3.1-pre5-3 tools for managing Linux kernel mo

-- no debconf information

--- End Message ---
--- Begin Message --- 
This bug appears to be fixed in newer kernel versions and there has been no
feedback (requested Jan 2005) from the submitter.  Closing now.  If the bug
occurs in a current version of Debian, please resubmit it.

-- 
Nathanael Nerode  <neroden@fastmail.fm>

"It's just a goddamned piece of paper."
-- President Bush, referring to the US Constitution
http://www.capitolhillblue.com/artman/publish/article_7779.shtml

--- End Message ---
Reply to: