linux-2.6_2.6.18-6_powerpc.changes is NEW
linux-2.6_2.6.18-6.diff.gz
to pool/main/l/linux-2.6/linux-2.6_2.6.18-6.diff.gz
linux-2.6_2.6.18-6.dsc
to pool/main/l/linux-2.6/linux-2.6_2.6.18-6.dsc
linux-doc-2.6.18_2.6.18-6_all.deb
to pool/main/l/linux-2.6/linux-doc-2.6.18_2.6.18-6_all.deb
(new) linux-headers-2.6.18-3-all-powerpc_2.6.18-6_powerpc.deb optional devel
All header files for Linux 2.6.18
This package depends against all architecture-specific kernel header files
for Linux kernel version 2.6.18, generally used for building out-of-tree
kernel modules.
(new) linux-headers-2.6.18-3-all_2.6.18-6_powerpc.deb optional devel
All header files for Linux 2.6.18
This package depends against all architecture-specific kernel header files
for Linux kernel version 2.6.18, generally used for building out-of-tree
kernel modules.
(new) linux-headers-2.6.18-3-powerpc-miboot_2.6.18-6_powerpc.deb optional devel
Header files for Linux 2.6.18 on 32-bit PowerPC for miboot floppy
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on 32-bit PowerPC for miboot floppy machines,
generally used for building out-of-tree kernel modules. These files are
going to be installed into /usr/src/linux-headers-2.6.18-3-powerpc-miboot,
and can be used for building modules that load into the kernel provided by
the linux-image-2.6.18-3-powerpc-miboot package.
(new) linux-headers-2.6.18-3-powerpc-smp_2.6.18-6_powerpc.deb optional devel
Header files for Linux 2.6.18 on multiprocessor 32-bit PowerPC
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on multiprocessor 32-bit PowerPC machines, generally
used for building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-3-powerpc-smp, and can be
used for building modules that load into the kernel provided by the
linux-image-2.6.18-3-powerpc-smp package.
(new) linux-headers-2.6.18-3-powerpc64_2.6.18-6_powerpc.deb optional devel
Header files for Linux 2.6.18 on 64-bit PowerPC
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on 64-bit PowerPC machines, generally used for
building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-3-powerpc64, and can be used
for building modules that load into the kernel provided by the
linux-image-2.6.18-3-powerpc64 package.
(new) linux-headers-2.6.18-3-powerpc_2.6.18-6_powerpc.deb optional devel
Header files for Linux 2.6.18 on uniprocessor 32-bit PowerPC
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on uniprocessor 32-bit PowerPC machines, generally
used for building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-3-powerpc, and can be used
for building modules that load into the kernel provided by the
linux-image-2.6.18-3-powerpc package.
(new) linux-headers-2.6.18-3-prep_2.6.18-6_powerpc.deb optional devel
Header files for Linux 2.6.18 on PReP PowerPC
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on PReP PowerPC machines, generally used for building
out-of-tree kernel modules. These files are going to be installed into
/usr/src/linux-headers-2.6.18-3-prep, and can be used for building modules
that load into the kernel provided by the linux-image-2.6.18-3-prep
package.
(new) linux-headers-2.6.18-3-vserver-powerpc64_2.6.18-6_powerpc.deb optional devel
Header files for Linux 2.6.18 on 64-bit PowerPC
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on 64-bit PowerPC machines, generally used for
building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-3-vserver-powerpc64, and can
be used for building modules that load into the kernel provided by the
linux-image-2.6.18-3-vserver-powerpc64 package.
(new) linux-headers-2.6.18-3-vserver-powerpc_2.6.18-6_powerpc.deb optional devel
Header files for Linux 2.6.18 on uniprocessor 32-bit PowerPC
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on uniprocessor 32-bit PowerPC machines, generally
used for building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-3-vserver-powerpc, and can be
used for building modules that load into the kernel provided by the
linux-image-2.6.18-3-vserver-powerpc package.
(new) linux-headers-2.6.18-3-vserver_2.6.18-6_powerpc.deb optional devel
Common header files for Linux 2.6.18
This package provides the (sub)architecture-specific common kernel header
files for Linux kernel version 2.6.18, generally used for building
out-of-tree kernel modules. To obtain a complete set of headers you also
need to install the linux-headers-2.6.18-3-(flavour) package, matching the
flavour of the kernel you intend the build for. To obtain such a set for
the currently running kernel it is sufficient to run a command
.
apt-get install linux-headers-$(uname -r)
.
and it will be unpacked in /usr/src/linux-headers-2.6.18-3-(flavour).
(new) linux-headers-2.6.18-3_2.6.18-6_powerpc.deb optional devel
Common header files for Linux 2.6.18
This package provides the (sub)architecture-specific common kernel header
files for Linux kernel version 2.6.18, generally used for building
out-of-tree kernel modules. To obtain a complete set of headers you also
need to install the linux-headers-2.6.18-3-(flavour) package, matching the
flavour of the kernel you intend the build for. To obtain such a set for
the currently running kernel it is sufficient to run a command
.
apt-get install linux-headers-$(uname -r)
.
and it will be unpacked in /usr/src/linux-headers-2.6.18-3-(flavour).
(new) linux-image-2.6.18-3-powerpc-miboot_2.6.18-6_powerpc.deb optional admin
Linux 2.6.18 image on 32-bit PowerPC for miboot floppy
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on 32-bit PowerPC for miboot floppy machines.
(new) linux-image-2.6.18-3-powerpc-smp_2.6.18-6_powerpc.deb optional admin
Linux 2.6.18 image on multiprocessor 32-bit PowerPC
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on multiprocessor 32-bit PowerPC machines.
(new) linux-image-2.6.18-3-powerpc64_2.6.18-6_powerpc.deb optional admin
Linux 2.6.18 image on 64-bit PowerPC
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on 64-bit PowerPC machines.
(new) linux-image-2.6.18-3-powerpc_2.6.18-6_powerpc.deb optional admin
Linux 2.6.18 image on uniprocessor 32-bit PowerPC
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on uniprocessor 32-bit PowerPC machines.
(new) linux-image-2.6.18-3-prep_2.6.18-6_powerpc.deb optional admin
Linux 2.6.18 image on PReP PowerPC
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on PReP PowerPC machines.
(new) linux-image-2.6.18-3-vserver-powerpc64_2.6.18-6_powerpc.deb optional admin
Linux 2.6.18 image on 64-bit PowerPC
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on 64-bit PowerPC machines.
(new) linux-image-2.6.18-3-vserver-powerpc_2.6.18-6_powerpc.deb optional admin
Linux 2.6.18 image on uniprocessor 32-bit PowerPC
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on uniprocessor 32-bit PowerPC machines.
linux-manual-2.6.18_2.6.18-6_all.deb
to pool/main/l/linux-2.6/linux-manual-2.6.18_2.6.18-6_all.deb
linux-patch-debian-2.6.18_2.6.18-6_all.deb
to pool/main/l/linux-2.6/linux-patch-debian-2.6.18_2.6.18-6_all.deb
linux-source-2.6.18_2.6.18-6_all.deb
to pool/main/l/linux-2.6/linux-source-2.6.18_2.6.18-6_all.deb
(new) linux-support-2.6.18-3_2.6.18-6_all.deb optional devel
Support files for Linux 2.6.18
This package provides support files for the Linux kernel build.
linux-tree-2.6.18_2.6.18-6_all.deb
to pool/main/l/linux-2.6/linux-tree-2.6.18_2.6.18-6_all.deb
Changes: linux-2.6 (2.6.18-6) unstable; urgency=low
.
[ maximilian attems ]
* Enable the new ACT modules globally. They were already set for amd64, hppa
and mips/mipsel - needed by newer iproute2. (closes: #395882, #398172)
* Fix msync() for LSB 3.1 compliance, backport fedora patches from 2.6.19
- mm: tracking shared dirty pages
- mm: balance dirty pages
- mm: optimize the new mprotect() code a bit
- mm: small cleanup of install_page()
- mm: fixup do_wp_page()
- mm: msync() cleanup (closes: #394392)
* [amd64,i386] Enable CONFIG_USB_APPLETOUCH=m (closes: #382298)
* Add stable release 2.6.18.3:
- x86_64: Fix FPU corruption
- e1000: Fix regression: garbled stats and irq allocation during swsusp
- POWERPC: Make alignment exception always check exception table
- usbtouchscreen: use endpoint address from endpoint descriptor
- fix via586 irq routing for pirq 5
- init_reap_node() initialization fix
- CPUFREQ: Make acpi-cpufreq unsticky again.
- SPARC64: Fix futex_atomic_cmpxchg_inatomic implementation.
- SPARC: Fix missed bump of NR_SYSCALLS.
- NET: __alloc_pages() failures reported due to fragmentation
- pci: don't try to remove sysfs files before they are setup.
- fix UFS superblock alignment issues
- NET: Set truesize in pskb_copy
- block: Fix bad data direction in SG_IO (closes: #394690)
- cpqarray: fix iostat
- cciss: fix iostat
- Char: isicom, fix close bug
- TCP: Don't use highmem in tcp hash size calculation.
- S390: user readable uninitialised kernel memory, take 2.
- correct keymapping on Powerbook built-in USB ISO keyboards
- USB: failure in usblp's error path
- Input: psmouse - fix attribute access on 64-bit systems
- Fix sys_move_pages when a NULL node list is passed.
- CIFS: report rename failure when target file is locked by Windows
- CIFS: New POSIX locking code not setting rc properly to zero on successful
- Patch for nvidia divide by zero error for 7600 pci-express card
(maybe fixes 398258)
- ipmi_si_intf.c sets bad class_mask with PCI_DEVICE_CLASS
.
[ Steve Langasek ]
* [alpha] new titan-video patch, for compatibility with TITAN and similar
systems with non-standard VGA hose configs
* [alpha] bugfix for srm_env module from upstream (Jan-Benedict Glaw),
makes the module compatible with the current /proc interface so that
reads no longer return EFAULT. (closes: #353079)
* Bump ABI to 3 for the msync fixes above.
.
[ Martin Michlmayr ]
* arm: Set CONFIG_BINFMT_MISC=m
* arm/ixp4xx: Set CONFIG_ATM=m (and related modules) so CONFIG_USB_ATM has
an effect.
* arm/iop32x: Likewise.
* arm/s3c2410: Unset CONFIG_PM_LEGACY.
* arm/versatile: Fix Versatile PCI config byte accesses
* arm/ixp4xx: Swap the disk 1 and disk 2 LED definitions so they're right.
* mipsel/r5k-cobalt: Unset CONFIG_SCSI_SYM53C8XX_2 because the timeout is
just too long.
* arm/ixp4xx: Enable more V4L USB devices.
.
[ dann frazier ]
* Backport various SCTP changesets from 2.6.19, recommended by Vlad Yasevich
(closes: #397946)
* Add a "Scope of security support" section to README.Debian, recommended
by Moritz Muehlenhoff
.
[ Thiemo Seufer ]
* Enable raid456 for mips/mipsel qemu kernel.
.
[ dann frazier ]
* The scope of the USR-61S2B unusual_dev entry was tightened, but too
strictly. Loosen it to apply to additional devices with a smaller bcd.
(closes: #396375)
.
[ Sven Luther ]
* Added support for TI ez430 development tool ID in ti_usb.
Thanks to Oleg Verych for providing the patch.
.
[ Christian T. Steigies ]
* Added support for Atari EtherNEC, Aranym, video, keyboard, mouse, and serial
by Michael Schmitz
.
[ Bastian Blank ]
* [i386] Reenable AVM isdn card modules. (closes: #386872)
Override entries for your package:
linux-2.6_2.6.18-6.dsc - source devel
linux-doc-2.6.18_2.6.18-6_all.deb - optional doc
linux-manual-2.6.18_2.6.18-6_all.deb - optional doc
linux-patch-debian-2.6.18_2.6.18-6_all.deb - optional devel
linux-source-2.6.18_2.6.18-6_all.deb - optional devel
linux-tree-2.6.18_2.6.18-6_all.deb - optional devel
Announcing to debian-devel-changes@lists.debian.org
Closing bugs: 353079 382298 386872 394392 394690 395882 396375 397946 398172
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
Reply to: