linux-2.6_2.6.18-4_amd64.changes is NEW
linux-2.6_2.6.18-4.diff.gz
to pool/main/l/linux-2.6/linux-2.6_2.6.18-4.diff.gz
linux-2.6_2.6.18-4.dsc
to pool/main/l/linux-2.6/linux-2.6_2.6.18-4.dsc
linux-doc-2.6.18_2.6.18-4_all.deb
to pool/main/l/linux-2.6/linux-doc-2.6.18_2.6.18-4_all.deb
(new) linux-headers-2.6.18-2-all-amd64_2.6.18-4_amd64.deb optional devel
All header files for Linux 2.6.18
This package depends against all architecture-specific kernel header files
for Linux kernel version 2.6.18, generally used for building out-of-tree
kernel modules.
(new) linux-headers-2.6.18-2-all_2.6.18-4_amd64.deb optional devel
All header files for Linux 2.6.18
This package depends against all architecture-specific kernel header files
for Linux kernel version 2.6.18, generally used for building out-of-tree
kernel modules.
(new) linux-headers-2.6.18-2-amd64_2.6.18-4_amd64.deb optional devel
Header files for Linux 2.6.18 on AMD64
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on all 64bit single- and multiprocessor AMD and Intel
machines, generally used for building out-of-tree kernel modules. These
files are going to be installed into
/usr/src/linux-headers-2.6.18-2-amd64, and can be used for building
modules that load into the kernel provided by the
linux-image-2.6.18-2-amd64 package.
(new) linux-headers-2.6.18-2-vserver-amd64_2.6.18-4_amd64.deb optional devel
Header files for Linux 2.6.18 on AMD64
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on all 64bit single- and multiprocessor AMD and Intel
machines, generally used for building out-of-tree kernel modules. These
files are going to be installed into
/usr/src/linux-headers-2.6.18-2-vserver-amd64, and can be used for
building modules that load into the kernel provided by the
linux-image-2.6.18-2-vserver-amd64 package.
(new) linux-headers-2.6.18-2-vserver_2.6.18-4_amd64.deb optional devel
Common header files for Linux 2.6.18
This package provides the (sub)architecture-specific common kernel header
files for Linux kernel version 2.6.18, generally used for building
out-of-tree kernel modules. To obtain a complete set of headers you also
need to install the linux-headers-2.6.18-2-(flavour) package, matching the
flavour of the kernel you intend the build for. To obtain such a set for
the currently running kernel it is sufficient to run a command
.
apt-get install linux-headers-$(uname -r)
.
and it will be unpacked in /usr/src/linux-headers-2.6.18-2-(flavour).
(new) linux-headers-2.6.18-2-xen-amd64_2.6.18-4_amd64.deb optional devel
Header files for Linux 2.6.18 on AMD64
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on all 64bit single- and multiprocessor AMD and Intel
machines, generally used for building out-of-tree kernel modules. These
files are going to be installed into
/usr/src/linux-headers-2.6.18-2-xen-amd64, and can be used for building
modules that load into the kernel provided by the
linux-image-2.6.18-2-xen-amd64 package.
(new) linux-headers-2.6.18-2-xen-vserver-amd64_2.6.18-4_amd64.deb optional devel
Header files for Linux 2.6.18 on AMD64
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on all 64bit single- and multiprocessor AMD and Intel
machines, generally used for building out-of-tree kernel modules. These
files are going to be installed into
/usr/src/linux-headers-2.6.18-2-xen-vserver-amd64, and can be used for
building modules that load into the kernel provided by the
linux-image-2.6.18-2-xen-vserver-amd64 package.
(new) linux-headers-2.6.18-2-xen-vserver_2.6.18-4_amd64.deb optional devel
Common header files for Linux 2.6.18
This package provides the (sub)architecture-specific common kernel header
files for Linux kernel version 2.6.18, generally used for building
out-of-tree kernel modules. To obtain a complete set of headers you also
need to install the linux-headers-2.6.18-2-(flavour) package, matching the
flavour of the kernel you intend the build for. To obtain such a set for
the currently running kernel it is sufficient to run a command
.
apt-get install linux-headers-$(uname -r)
.
and it will be unpacked in /usr/src/linux-headers-2.6.18-2-(flavour).
(new) linux-headers-2.6.18-2-xen_2.6.18-4_amd64.deb optional devel
Common header files for Linux 2.6.18
This package provides the (sub)architecture-specific common kernel header
files for Linux kernel version 2.6.18, generally used for building
out-of-tree kernel modules. To obtain a complete set of headers you also
need to install the linux-headers-2.6.18-2-(flavour) package, matching the
flavour of the kernel you intend the build for. To obtain such a set for
the currently running kernel it is sufficient to run a command
.
apt-get install linux-headers-$(uname -r)
.
and it will be unpacked in /usr/src/linux-headers-2.6.18-2-(flavour).
(new) linux-headers-2.6.18-2_2.6.18-4_amd64.deb optional devel
Common header files for Linux 2.6.18
This package provides the (sub)architecture-specific common kernel header
files for Linux kernel version 2.6.18, generally used for building
out-of-tree kernel modules. To obtain a complete set of headers you also
need to install the linux-headers-2.6.18-2-(flavour) package, matching the
flavour of the kernel you intend the build for. To obtain such a set for
the currently running kernel it is sufficient to run a command
.
apt-get install linux-headers-$(uname -r)
.
and it will be unpacked in /usr/src/linux-headers-2.6.18-2-(flavour).
(new) linux-image-2.6.18-2-amd64_2.6.18-4_amd64.deb optional admin
Linux 2.6.18 image on AMD64
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on all 64bit single- and multiprocessor AMD and Intel
machines.
(new) linux-image-2.6.18-2-vserver-amd64_2.6.18-4_amd64.deb optional admin
Linux 2.6.18 image on AMD64
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on all 64bit single- and multiprocessor AMD and Intel
machines.
(new) linux-image-2.6.18-2-xen-amd64_2.6.18-4_amd64.deb optional admin
Linux 2.6.18 image on AMD64
This package provides the binary image for Linux kernel 2.6.18 on all
64bit single- and multiprocessor AMD and Intel machines.
(new) linux-image-2.6.18-2-xen-vserver-amd64_2.6.18-4_amd64.deb optional admin
Linux 2.6.18 image on AMD64
This package provides the binary image for Linux kernel 2.6.18 on all
64bit single- and multiprocessor AMD and Intel machines.
linux-manual-2.6.18_2.6.18-4_all.deb
to pool/main/l/linux-2.6/linux-manual-2.6.18_2.6.18-4_all.deb
(new) linux-modules-2.6.18-2-xen-amd64_2.6.18-4_amd64.deb optional admin
Linux 2.6.18 modules on AMD64
This package provides pre-built loadable modules for Linux kernel 2.6.18
on all 64bit single- and multiprocessor AMD and Intel machines.
(new) linux-modules-2.6.18-2-xen-vserver-amd64_2.6.18-4_amd64.deb optional admin
Linux 2.6.18 modules on AMD64
This package provides pre-built loadable modules for Linux kernel 2.6.18
on all 64bit single- and multiprocessor AMD and Intel machines.
linux-patch-debian-2.6.18_2.6.18-4_all.deb
to pool/main/l/linux-2.6/linux-patch-debian-2.6.18_2.6.18-4_all.deb
linux-source-2.6.18_2.6.18-4_all.deb
to pool/main/l/linux-2.6/linux-source-2.6.18_2.6.18-4_all.deb
(new) linux-support-2.6.18-2_2.6.18-4_all.deb optional devel
Support files for Linux 2.6.18
This package provides support files for the Linux kernel build.
linux-tree-2.6.18_2.6.18-4_all.deb
to pool/main/l/linux-2.6/linux-tree-2.6.18_2.6.18-4_all.deb
(new) xen-linux-system-2.6.18-2-xen-amd64_2.6.18-4_amd64.deb extra admin
XEN system with Linux 2.6.18 image on AMD64
This package depends on the binary Linux image and the correct hypervisor.
(new) xen-linux-system-2.6.18-2-xen-vserver-amd64_2.6.18-4_amd64.deb extra admin
XEN system with Linux 2.6.18 image on AMD64
This package depends on the binary Linux image and the correct hypervisor.
Changes: linux-2.6 (2.6.18-4) unstable; urgency=low
.
[ Norbert Tretkowski ]
* [alpha] Switched to gcc-4.1.
.
[ Jurij Smakov ]
* [sparc] Remove sparc64-atyfb-xl-gr.patch, it does more harm than
good in 2.6.18.
* [sparc] Add bugfix/sparc/compat-alloc-user-space-alignment.patch
(thanks to David Miller) to make sure that compat_alloc_user_space()
always returns memory aligned on a 8-byte boundary on sparc. This
prevents a number of unaligned memory accesses, like the ones in
sys_msgrcv() and compat_sys_msgrcv(), triggered every 5 seconds whenever
fakeroot is running.
* [sparc] Add bugfix/sparc/bus-id-size.patch (thanks to David Miller)
to ensure that the size of the strings stored in the bus_id field of
struct device never exceeds the amount of memory allocated for them
(20 bytes). It fixes the situations in which storing longer device
names in this field would cause corruption of adjacent memory regions.
(closes: #394697).
* [sparc] Add bugfix/sparc/sunblade1k-boot-fix.patch (thanks to David
Miller) to fix a boottime crash on SunBlade1000.
* [sparc] Add bugfix/sparc/t1k-cpu-lockup.patch (thanks to David Miller)
to prevent soft CPU lockup on T1000 servers, which can be triggered from
userspace, resulting in denial of service.
.
[ Martin Michlmayr ]
* arm/iop32x: Fix the interrupt of the 2nd Ethernet slot on N2100.
* arm/iop32x: Allow USB and serial to co-exist on N2100.
* arm/ixp4xx: Add clocksource for Intel IXP4xx platforms.
* arm: Enable CONFIG_AUDIT=y again.
* arm/ixp4xx: Add the IXP4xx Ethernet driver.
* arm/ixp4xx: Build LED support into the kernel.
* Add a driver for Fintek F75375S/SP and F75373.
* arm/iop32x: Build F75375S/SP support in.
* arm/iop32x: Fix the size of the RedBoot config partition.
.
[ maximilian attems ]
* Add netpoll leak fix.
* Add upstream forcedeth swsusp support.
* r8169: PCI ID for Corega Gigabit network card.
* r8169: the MMIO region of the 8167 stands behin BAR#1.
* r8169: Add upstream fix for infinite loop during hotplug.
* Bump build-dependency on kernel-package to 10.063.
* r8169: pull revert mac address change support.
* bcm43xx: Add full netdev watchout timeout patch. (closes: 392065)
Thanks Sjoerd Simons <sjoerd@spring.luon.net> for the testing.
* Add stable release 2.6.18.2:
- Remove not yet released, revert the included patches.
- Keep aboves bcm43xx fix, it's more complete.
- Watchdog: sc1200wdt - fix missing pnp_unregister_driver()
- fix missing ifdefs in syscall classes hookup for generic targets
- JMB 368 PATA detection
- usbfs: private mutex for open, release, and remove
- sound/pci/au88x0/au88x0.c: ioremap balanced with iounmap
- x86-64: Fix C3 timer test
- Reintroduce NODES_SPAN_OTHER_NODES for powerpc
- ALSA: emu10k1: Fix outl() in snd_emu10k1_resume_regs()
- IB/mthca: Use mmiowb after doorbell ring
- SCSI: DAC960: PCI id table fixup
- ALSA: snd_rtctimer: handle RTC interrupts with a tasklet
- JFS: pageno needs to be long
- SPARC64: Fix central/FHC bus handling on Ex000 systems.
- SPARC64: Fix memory corruption in pci_4u_free_consistent().
- SPARC64: Fix PCI memory space root resource on Hummingbird.
(closes: #392078)
- Fix uninitialised spinlock in via-pmu-backlight code.
- SCSI: aic7xxx: pause sequencer before touching SBLKCTL
- IPoIB: Rejoin all multicast groups after a port event
- ALSA: Dereference after free in snd_hwdep_release()
- rtc-max6902: month conversion fix
- NET: Fix skb_segment() handling of fully linear SKBs
- SCTP: Always linearise packet on input
- SCSI: aic7xxx: avoid checking SBLKCTL register for certain cards
- IPV6: fix lockup via /proc/net/ip6_flowlabel [CVE-2006-5619]
- fix Intel RNG detection
- ISDN: check for userspace copy faults
- ISDN: fix drivers, by handling errors thrown by ->readstat()
- splice: fix pipe_to_file() ->prepare_write() error path
- ALSA: Fix bug in snd-usb-usx2y's usX2Y_pcms_lock_check()
- ALSA: Repair snd-usb-usx2y for usb 2.6.18
- PCI: Remove quirk_via_abnormal_poweroff
- Bluetooth: Check if DLC is still attached to the TTY
- vmscan: Fix temp_priority race
- Use min of two prio settings in calculating distress for reclaim
- __div64_32 for 31 bit. Fixes funny clock speed on hercules emulator.
(closes: 395247)
- DVB: fix dvb_pll_attach for mt352/zl10353 in cx88-dvb, and nxt200x
- fuse: fix hang on SMP
- md: Fix bug where spares don't always get rebuilt properly when they become live.
- md: Fix calculation of ->degraded for multipath and raid10
- knfsd: Fix race that can disable NFS server.
- md: check bio address after mapping through partitions.
- fill_tgid: fix task_struct leak and possible oops
- uml: fix processor selection to exclude unsupported processors and features
- uml: remove warnings added by previous -stable patch
- Fix sfuzz hanging on 2.6.18
- SERIAL: Fix resume handling bug
- SERIAL: Fix oops when removing suspended serial port
- sky2: MSI test race and message
- sky2: pause parameter adjustment
- sky2: turn off PHY IRQ on shutdown
- sky2: accept multicast pause frames
- sky2: GMAC pause frame
- sky2: 88E803X transmit lockup (2.6.18)
- tcp: cubic scaling error
- mm: fix a race condition under SMC + COW
- ALSA: powermac - Fix Oops when conflicting with aoa driver
- ALSA: Fix re-use of va_list
- posix-cpu-timers: prevent signal delivery starvation
- NFS: nfs_lookup - don't hash dentry when optimising away the lookup
- uml: make Uml compile on FC6 kernel headers
- Fix potential interrupts during alternative patching
* Backport atkbd - supress "too many keys" error message.
* [s390] Revert temporarly 2.6.18.1 "S390: user readable uninitialised
kernel memory (CVE-2006-5174)" fix as it causes ftfbs
.
[ Sven Luther ]
* [powerpc] Added exception alignement patch from Benjamin Herrenschmidt.
.
[ Frederik Schüler ]
* Bump ABI to 2.
* Update vserver patch to 2.0.2.2-rc4.
.
[ Thiemo Seufer ]
* Add patches from linux-mips.org's 2.6.18-stable branch:
- bugfix/copy-user-highpage.patch, needed for cache alias handling
on mips/mipsel/hppa.
- bugfix/mips/syscall-wiring.patch, fixes TLS register access, and
n32 rt_sigqueueinfo.
- bugfix/mips/sb1-flush-cache-data-page.patch, missing cache flush
on SB-1.
- bugfix/mips/trylock.patch, fix trylock implementation for R1x000
and R3xxx.
- bugfix/mips/smp-cpu-bringup.patch, correct initialization of
non-contiguous CPU topology.
- bugfix/mips/header-exports.patch, clean up userland exports of
kernel headers.
- bugfix/mips/sb1-interrupt-handler.patch, fix broken interrupt
routing on SB-1.
- bugfix/mips/cache-alias.patch, fixes #387498 for mips/mipsel.
- bugfix/mips/ip22-zilog-console.patch, fix long delays seen with
SGI ip22 serial console.
- bugfix/mips/signal-handling.patch, fixes a signal handling race
condition shown with gdb.
- bugfix/mips/sb1-duart-tts.patch, replaces mips-sb1-duart-tts.patch,
use standard Linux names for SB-1 consoles.
- bugfix/mips/wait-race.patch, correct behaviour of the idle loop.
- bugfix/mips/sgi-ioc3.patch, checksumming fix for IOC3 network
driver.
- features/mips/qemu-kernel.patch, support for the mips/mipsel
machine emulated by Qemu.
- features/mips/backtrace.patch, reimplementation of stack analysis
and backtrace printing, useful for in-kernel debugging.
- bugfix/mips/dec-scsi.patch, replaces mips-dec-scsi.patch, fixes DSP
SCSI driver for DECstations.
- bugfix/mips/dec-serial.patch, replaces mips-dec-serial.patch, fix
serial console handling on DECstations.
Override entries for your package:
linux-2.6_2.6.18-4.dsc - source devel
linux-doc-2.6.18_2.6.18-4_all.deb - optional doc
linux-manual-2.6.18_2.6.18-4_all.deb - optional doc
linux-patch-debian-2.6.18_2.6.18-4_all.deb - optional devel
linux-source-2.6.18_2.6.18-4_all.deb - optional devel
linux-tree-2.6.18_2.6.18-4_all.deb - optional devel
Announcing to debian-devel-changes@lists.debian.org
Closing bugs: 392065 392078 394697 395247
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
Reply to: