Bug#394753: linux-image-2.6.18-1-486: system clock runs at double speed
Package: linux-image-2.6.18-1-486
Version: 2.6.18-2
Severity: important
Hi,
with kernel 2.6.18 the system clock runs as twice as fast as it should
on my AMD k6/400, ASUS P5A board. Kernels <= 2.6.17 work fine. I tried
the following boot parameters known as workarounds for chipset bugs:
notsc no_timer_check
disable_timer_pin_1
noapic acpi=noirq
notsc
but none of them helped. If this is a hardware bug, feel free to change
this bug report into a feature request of working around the hw bug
automatically. The boot log is attached.
Best regards,
- Dietrich
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i586)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-486
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)
Versions of packages linux-image-2.6.18-1-486 depends on:
ii module-init-tools 3.2.2-3 tools for managing Linux kernel mo
ii yaird [linux-initramfs-tool] 0.0.12-18 Yet Another mkInitRD
linux-image-2.6.18-1-486 recommends no packages.
-- debconf information:
linux-image-2.6.18-1-486/preinst/overwriting-modules-2.6.18-1-486: true
linux-image-2.6.18-1-486/postinst/old-system-map-link-2.6.18-1-486: true
linux-image-2.6.18-1-486/postinst/bootloader-error-2.6.18-1-486:
linux-image-2.6.18-1-486/preinst/elilo-initrd-2.6.18-1-486: true
linux-image-2.6.18-1-486/postinst/create-kimage-link-2.6.18-1-486: true
linux-image-2.6.18-1-486/postinst/old-initrd-link-2.6.18-1-486: true
linux-image-2.6.18-1-486/preinst/bootloader-initrd-2.6.18-1-486: true
linux-image-2.6.18-1-486/prerm/would-invalidate-boot-loader-2.6.18-1-486: true
linux-image-2.6.18-1-486/preinst/failed-to-move-modules-2.6.18-1-486:
linux-image-2.6.18-1-486/preinst/abort-overwrite-2.6.18-1-486:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.18-1-486/postinst/depmod-error-initrd-2.6.18-1-486: false
linux-image-2.6.18-1-486/prerm/removing-running-kernel-2.6.18-1-486: true
linux-image-2.6.18-1-486/preinst/initrd-2.6.18-1-486:
linux-image-2.6.18-1-486/preinst/lilo-has-ramdisk:
linux-image-2.6.18-1-486/preinst/abort-install-2.6.18-1-486:
linux-image-2.6.18-1-486/postinst/old-dir-initrd-link-2.6.18-1-486: true
linux-image-2.6.18-1-486/postinst/depmod-error-2.6.18-1-486: false
linux-image-2.6.18-1-486/preinst/already-running-this-2.6.18-1-486:
linux-image-2.6.18-1-486/postinst/bootloader-test-error-2.6.18-1-486:
linux-image-2.6.18-1-486/preinst/lilo-initrd-2.6.18-1-486: true
linux-image-2.6.18-1-486/postinst/kimage-is-a-directory:
18:34:44 kernel: klogd 1.4.1#20, log source = /proc/kmsg started.
18:34:44 kernel: Linux version 2.6.18-1-486 (Debian 2.6.18-2) (waldi@debian.org) (gcc version 4.1.2 20060920 (prerelease) (Debian 4.1.1-14)) #1 Fri Sep 29 15:40:22 UTC 2006
18:34:44 kernel: BIOS-provided physical RAM map:
18:34:44 kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
18:34:44 kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
18:34:44 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
18:34:44 kernel: BIOS-e820: 0000000000100000 - 0000000017ffc000 (usable)
18:34:44 kernel: BIOS-e820: 0000000017ffc000 - 0000000017fff000 (ACPI data)
18:34:44 kernel: BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)
18:34:44 kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
18:34:44 kernel: 383MB LOWMEM available.
18:34:44 kernel: On node 0 totalpages: 98300
18:34:44 kernel: DMA zone: 4096 pages, LIFO batch:0
18:34:44 kernel: Normal zone: 94204 pages, LIFO batch:31
18:34:44 kernel: DMI 2.0 present.
18:34:44 kernel: ACPI: RSDP (v000 ASUS ) @ 0x000f81a0
18:34:44 kernel: ACPI: RSDT (v001 ASUS P5A 0x58582e31 ASUS 0x31303030) @ 0x17ffc000
18:34:44 kernel: ACPI: FADT (v001 ASUS P5A 0x58582e31 ASUS 0x31303030) @ 0x17ffc080
18:34:44 kernel: ACPI: BOOT (v001 ASUS P5A 0x58582e31 ASUS 0x31303030) @ 0x17ffc040
18:34:44 kernel: ACPI: DSDT (v001 ASUS P5A 0x00001000 MSFT 0x01000001) @ 0x00000000
18:34:44 kernel: ACPI: PM-Timer IO Port: 0xec08
18:34:44 kernel: Allocating PCI resources starting at 20000000 (gap: 18000000:e7ff0000)
18:34:44 kernel: Detected 400.954 MHz processor.
18:34:44 kernel: Built 1 zonelists. Total pages: 98300
18:34:44 kernel: Kernel command line: root=/dev/hdb ro
18:34:44 kernel: No local APIC present or hardware disabled
18:34:44 kernel: mapped APIC to ffffd000 (01302000)
18:34:44 kernel: Initializing CPU#0
18:34:44 kernel: PID hash table entries: 2048 (order: 11, 8192 bytes)
18:34:44 kernel: Console: colour VGA+ 80x25
18:34:44 kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
18:34:44 kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
18:34:44 kernel: Memory: 385360k/393200k available (1499k kernel code, 7192k reserved, 599k data, 256k init, 0k highmem)
18:34:44 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
18:34:44 kernel: Calibrating delay using timer specific routine.. 802.41 BogoMIPS (lpj=1604820)
18:34:44 kernel: Security Framework v1.0.0 initialized
18:34:44 kernel: SELinux: Disabled at boot.
18:34:44 kernel: Capability LSM initialized
18:34:44 kernel: Mount-cache hash table entries: 512
18:34:44 kernel: CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000
18:34:44 kernel: CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000
18:34:44 kernel: CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
18:34:44 kernel: CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002 00000000 00000000 00000000
18:34:44 kernel: Compat vDSO mapped to ffffe000.
18:34:44 kernel: CPU: AMD-K6(tm) 3D processor stepping 0c
18:34:44 kernel: Checking 'hlt' instruction... OK.
18:34:44 kernel: ACPI: Core revision 20060707
18:34:44 kernel: ACPI: setting ELCR to 0200 (from 0c20)
18:34:44 kernel: checking if image is initramfs... it is
18:34:44 kernel: Freeing initrd memory: 1098k freed
18:34:44 kernel: NET: Registered protocol family 16
18:34:44 kernel: EISA bus registered
18:34:44 kernel: ACPI: bus type pci registered
18:34:44 kernel: PCI: PCI BIOS revision 2.10 entry at 0xf06c0, last bus=1
18:34:44 kernel: PCI: Using configuration type 1
18:34:44 kernel: Setting up standard PCI resources
18:34:44 kernel: ACPI: Interpreter enabled
18:34:44 kernel: ACPI: Using PIC for interrupt routing
18:34:44 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
18:34:44 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
18:34:44 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 9 10 11 12 14 15)
18:34:44 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 9 10 11 12 14 15)
18:34:44 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 9 10 11 12 14 15)
18:34:44 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
18:34:44 kernel: PCI: Probing PCI hardware (bus 00)
18:34:44 kernel: ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
18:34:44 kernel: PCI quirk: region 5c20-5c3f claimed by ali7101 SMB
18:34:44 kernel: Boot video device is 0000:00:0b.0
18:34:44 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
18:34:44 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
18:34:44 kernel: pnp: PnP ACPI init
18:34:44 kernel: pnp: PnP ACPI: found 13 devices
18:34:44 kernel: PnPBIOS: Disabled by ACPI PNP
18:34:44 kernel: PCI: Using ACPI for IRQ routing
18:34:44 kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
18:34:44 kernel: pnp: 00:02: ioport range 0xec00-0xec3f could not be reserved
18:34:44 kernel: pnp: 00:02: ioport range 0xe800-0xe81f has been reserved
18:34:44 kernel: pnp: 00:02: ioport range 0x40b-0x40b has been reserved
18:34:44 kernel: pnp: 00:02: ioport range 0x480-0x49f has been reserved
18:34:44 kernel: pnp: 00:02: ioport range 0x4d6-0x4d6 has been reserved
18:34:44 kernel: pnp: 00:02: ioport range 0x290-0x297 has been reserved
18:34:44 kernel: PCI: Bridge: 0000:00:01.0
18:34:44 kernel: IO window: disabled.
18:34:44 kernel: MEM window: disabled.
18:34:44 kernel: PREFETCH window: disabled.
18:34:44 kernel: NET: Registered protocol family 2
18:34:44 kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
18:34:44 kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
18:34:44 kernel: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
18:34:44 kernel: TCP: Hash tables configured (established 16384 bind 8192)
18:34:44 kernel: TCP reno registered
18:34:44 kernel: Simple Boot Flag at 0x46 set to 0x1
18:34:44 kernel: audit: initializing netlink socket (disabled)
18:34:44 kernel: audit(1161016444.048:1): initialized
18:34:44 kernel: VFS: Disk quotas dquot_6.5.1
18:34:44 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
18:34:44 kernel: Initializing Cryptographic API
18:34:44 kernel: io scheduler noop registered
18:34:44 kernel: io scheduler anticipatory registered
18:34:44 kernel: io scheduler deadline registered
18:34:44 kernel: io scheduler cfq registered (default)
18:34:44 kernel: Activating ISA DMA hang workarounds.
18:34:44 kernel: isapnp: Scanning for PnP cards...
18:34:44 kernel: isapnp: No Plug & Play device found
18:34:44 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
18:34:44 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
18:34:44 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
18:34:44 kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
18:34:44 kernel: 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
18:34:44 kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
18:34:44 kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
18:34:44 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
18:34:44 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
18:34:44 kernel: mice: PS/2 mouse device common for all mice
18:34:44 kernel: EISA: Probing bus 0 at eisa.0
18:34:44 kernel: Cannot allocate resource for EISA slot 5
18:34:44 kernel: EISA: Detected 0 cards.
18:34:44 kernel: TCP bic registered
18:34:44 kernel: NET: Registered protocol family 1
18:34:44 kernel: NET: Registered protocol family 17
18:34:44 kernel: NET: Registered protocol family 8
18:34:44 kernel: NET: Registered protocol family 20
18:34:44 kernel: Using IPI Shortcut mode
18:34:44 kernel: Time: tsc clocksource has been installed.
18:34:44 kernel: ACPI: (supports S0 S1 S5)
18:34:44 kernel: Freeing unused kernel memory: 256k freed
18:34:44 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
18:34:44 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
18:34:44 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
18:34:44 kernel: ALI15X3: IDE controller at PCI slot 0000:00:0f.0
18:34:44 kernel: ACPI: Unable to derive IRQ for device 0000:00:0f.0
18:34:44 kernel: ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI
18:34:44 kernel: ALI15X3: chipset revision 193
18:34:44 kernel: ALI15X3: not 100%% native mode: will probe irqs later
18:34:44 kernel: ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
18:34:44 kernel: ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:pio
18:34:44 kernel: Probing IDE interface ide0...
18:34:44 kernel: hda: SAMSUNG PLS-31084A, ATA DISK drive
18:34:44 kernel: hdb: SAMSUNG SV1203N, ATA DISK drive
18:34:44 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
18:34:44 kernel: Probing IDE interface ide1...
18:34:44 kernel: hdc: MIDA 40XB, ATAPI CD/DVD-ROM drive
18:34:44 kernel: ide1 at 0x170-0x177,0x376 on irq 15
18:34:44 kernel: hda: max request size: 128KiB
18:34:44 kernel: hda: 2110752 sectors (1080 MB) w/256KiB Cache, CHS=2094/16/63, DMA
18:34:44 kernel: hda: hda1
18:34:44 kernel: hdb: max request size: 128KiB
18:34:44 kernel: hdb: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
18:34:44 kernel: hdb: cache flushes supported
18:34:44 kernel: hdb: unknown partition table
18:34:44 kernel: kjournald starting. Commit interval 5 seconds
18:34:44 kernel: EXT3-fs: mounted filesystem with ordered data mode.
18:34:44 kernel: Real Time Clock Driver v1.12ac
18:34:44 kernel: hdc: ATAPI 40X CD-ROM drive, 120kB Cache, (U)DMA
18:34:44 kernel: Uniform CD-ROM driver Revision: 3.20
18:34:44 kernel: parport: PnPBIOS parport detected.
18:34:44 kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
18:34:44 kernel: Floppy drive(s): fd0 is 1.44M
18:34:44 kernel: FDC 0 is a post-1991 82077
18:34:44 kernel: 8139too Fast Ethernet driver 0.9.27
18:34:44 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
18:34:44 kernel: PCI: setting IRQ 5 as level-triggered
18:34:44 kernel: ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
18:34:44 kernel: eth0: RealTek RTL8139 at 0xd000, 00:a1:b0:00:f2:3d, IRQ 5
18:34:44 kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
18:34:44 kernel: 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
18:34:44 kernel: Linux agpgart interface v0.101 (c) Dave Jones
18:34:44 kernel: input: PC Speaker as /class/input/input1
18:34:44 kernel: usbcore: registered new driver usbfs
18:34:44 kernel: usbcore: registered new driver hub
18:34:44 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
18:34:44 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
18:34:44 kernel: agpgart: Detected ALi M1541 chipset
18:34:44 kernel: agpgart: AGP aperture is 64M @ 0xc8000000
18:34:44 kernel: ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
18:34:44 kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
18:34:44 kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
18:34:44 kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
18:34:44 kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
18:34:44 kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
18:34:44 kernel: ohci_hcd 0000:00:02.0: irq 5, io mem 0xc7800000
18:34:44 kernel: usb usb1: configuration #1 chosen from 1 choice
18:34:44 kernel: hub 1-0:1.0: USB hub found
18:34:44 kernel: hub 1-0:1.0: 2 ports detected
18:34:44 kernel: input: PS2++ Logitech Wheel Mouse as /class/input/input2
18:34:44 kernel: SCSI subsystem initialized
18:34:44 kernel: dc395x: Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08
18:34:44 kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
18:34:44 kernel: PCI: setting IRQ 11 as level-triggered
18:34:44 kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
18:34:44 kernel: dc395x: Used settings: AdapterID=07, Speed=0(20.0MHz), dev_mode=0x37
18:34:44 kernel: dc395x: AdaptMode=0x0f, Tags=4(16), DelayReset=1s
18:34:44 kernel: dc395x: Connectors: ext50 int50 Termination: Auto High
18:34:44 kernel: dc395x: Performing initial SCSI bus reset
18:34:44 kernel: scsi0 : Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08
18:34:44 kernel: dc395x: msgin_set_sync: Increase sync nego period to 124ns
18:34:44 kernel: dc395x: Target 02: Sync: 124ns Offset 15 (08.1 MB/s)
18:34:44 kernel: Vendor: YAMAHA Model: CRW4416S Rev: 1.0g
18:34:44 kernel: Type: CD-ROM ANSI SCSI revision: 02
18:34:44 kernel: Vendor: SCANNER Model: Rev: 2.00
18:34:44 kernel: Type: Scanner ANSI SCSI revision: 01 CCS
18:34:44 kernel: ts: Compaq touchscreen protocol output
18:34:44 kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
18:34:44 kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
18:34:44 kernel: sr 0:0:2:0: Attached scsi generic sg0 type 5
18:34:44 kernel: scsi 0:0:6:0: Attached scsi generic sg1 type 6
18:34:44 kernel: sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
18:34:44 kernel: sr 0:0:2:0: Attached scsi CD-ROM sr0
18:34:44 kernel: EXT3 FS on hdb, internal journal
18:34:44 kernel: ppa: Version 2.07 (for Linux 2.4.x)
18:34:44 kernel: fuse init (API version 7.7)
18:34:44 kernel: device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
18:34:44 kernel: kjournald starting. Commit interval 5 seconds
18:34:44 kernel: EXT3 FS on hda1, internal journal
18:34:44 kernel: EXT3-fs: mounted filesystem with ordered data mode.
18:34:44 kernel: Adding 1048568k swap on /var/spool/swap. Priority:-1 extents:268 across:1409216k
18:34:44 kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
18:34:44 kernel: NET: Registered protocol family 10
18:34:44 kernel: lo: Disabled Privacy Extensions
18:34:44 kernel: IPv6 over IPv4 tunneling driver
18:34:47 kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
18:34:47 kernel: ACPI: Power Button (FF) [PWRF]
18:34:47 kernel: Time: acpi_pm clocksource has been installed.
18:34:53 kernel: eth0: no IPv6 routers present
18:35:33 kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
18:35:34 kernel: NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
18:35:34 kernel: NFSD: starting 90-second grace period
21:58:36 kernel: nfsd: last server has exited
21:58:36 kernel: nfsd: unexporting all filesystems
21:58:37 kernel: Kernel logging (proc) stopped.
21:58:37 kernel: Kernel log daemon terminating.
Reply to: