Your message dated Sun, 24 Sep 2006 11:04:47 -0700 with message-id <E1GRYLP-0007ZK-0X@spohr.debian.org> and subject line Bug#364637: fixed in linux-2.6 2.6.18-1 has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database)
--- Begin Message ---
- To: submit@bugs.debian.org
- Cc: harbaugh@abcc.ncifcrf.gov
- Subject: installation report (try 2)
- From: "Toni L. Harbaugh-Blackford [Contr]" <harbaugh@abcc.ncifcrf.gov>
- Date: Tue, 2 May 2006 08:07:45 -0400
- Message-id: <Pine.SGI.4.58.0605020807060.3446@ncisgi.ncifcrf.gov>
- Reply-to: harbaugh@abcc.ncifcrf.gov
Package: installation-reports Boot method: usb flash drive (two different models attempted) Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/powerpc/iso-cd/debian-testing-powerpc-netinst.iso (from 4/1/06) Date: 5/02/06 07:20 Machine: Xserve G5 cluster node (headless), usb flash drive Processor: Dual PowerPC970 (Apple RackMac3,1 5.1.7f0 BootROM built on 05/06/04 at 15:57:06) Memory: 2GB Partitions: none yet; testing installer bootability Output of lspci and lspci -n: N/A Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: Installer crashes with an oops, 'Unable to handle kernel paging request'. Crash at same place in boot with two different usb sticks, but different tasks and locations listed in the stack trace, which is strange. Console log with Kingston DataTraveler: Apple RackMac3,1 5.1.7f0 BootROM built on 05/06/04 at 15:57:06 Copyright 1994-2004 Apple Computer, Inc. All Rights Reserved. Welcome to Open Firmware, the system time and date is: 10:59:53 05/02/2006 To continue booting, type "mac-boot" and press return. To shut down, type "shut-down" and press return. 0 > dev /ht/pci@4 ls ff9b1b98: /usb@b ff9f1a70: /disk@1 ff9b9bd0: /usb@b,1 ff9c1c08: /usb@b,2 ok 0 > devalias cd /ht/pci@4/usb@b/disk@1 ok 0 > dir cd:,\ - Debian/PowerPC_etch Size/ GMT File/Dir bytes date time TYPE CRTR Name 1/ 1/ 4 0: 0: 0 .disk 1/ 1/ 4 0: 0: 0 dists 1/ 1/ 4 0: 0: 0 doc 1/ 1/ 4 0: 0: 0 etc 1/ 1/ 4 0: 0: 0 *install 51259 4/21/ 6 2:21:19 ???? ???? md5sum.txt 1/ 1/ 4 0: 0: 0 pics 1/ 1/ 4 0: 0: 0 pool 1/ 1/ 4 0: 0: 0 ppc 10293 4/21/ 6 2:20:46 ???? ???? README.html 72722 1/13/ 6 21:52:32 ???? ???? README.mirrors.html 39849 1/13/ 6 21:52:32 ???? ???? README.mirrors.txt 5327 4/21/ 6 2:20:46 ???? ???? README.txt 1/ 1/ 4 0: 0: 0 tools ok 0 > dir cd:,\install \ SOF timeout Size/ GMT File/Dir bytes date time TYPE CRTR Name 781 4/21/ 6 2:20:47 ???? ???? boot.msg 1855 4/21/ 6 2:20:47 tbxi UNIX ofboot.b 2319 4/21/ 6 2:20:47 ???? ???? pegasos 1/ 1/ 4 0: 0: 0 powerpc 1/ 1/ 4 0: 0: 0 powerpc64 149740 3/ 2/ 6 16:11: 8 boot UNIX yaboot 1138 4/21/ 6 2:20:47 conf UNIX yaboot.conf ok 0 > boot cd:,\install\yaboot load-size=248ec adler32=881546ed Loading ELF Config file read, 1138 bytes Welcome to Debian GNU/Linux etch! This is a Debian installation CDROM, built on 20060421. The default option is 'install'. For maximum control, you can use the 'expert' option. If the system fails to boot at all (the typical symptom is a white screen which doesn't go away), use 'install video=ofonly' or 'expert video=ofonly'. The plain options are for the powerpc family of processors (from 601 to G4). The *64 options are for 64bit powerpc processors, which include the IBM Power3, Power4, Power5, ... boxes, as well as the Apple G5 boxes. Press the tab key for a list of options, or type 'help' for help. ************************************ If in doubt, just choose 'install', and if that doesn't work, try 'install video=ofonly'. ************************************ Welcome to yaboot version 1.3.13 Enter "help" to get some basic usage information WARNING: Bootstrap partition type is wrong: "Apple_HFS" type should be: "Apple_Bootstrap" boot: * install expert install64 expert64 boot: expert64 debug Please wait, loading kernel... Elf64 kernel loaded... Loading ramdisk... ramdisk loaded at 01a00000, size: 3522 Kbytes OF stdout device is: /ht@0,f2000000/pci@3/mac-io@7/escc@13000/ch-a@13020 command line: ro ramdisk_size=10240 DEBCONF_PRIORITY=low devfs=mount,dall init=/linuxrc -- debug memory layout at init: memory_limit : 0000000000000000 (16 MB aligned) alloc_bottom : 0000000001d71000 alloc_top : 0000000020000000 alloc_top_hi : 0000000080000000 rmo_top : 0000000020000000 ram_top : 0000000080000000 Looking for displays copying OF device tree ... Building dt strings... Building dt structure... Device tree strings 0x0000000001e72000 -> 0x0000000001e7336e Device tree struct 0x0000000001e74000 -> 0x0000000001e87000 Calling quiesce ... DO-QUIESCE finishedreturning from prom_init Page orders: linear mapping = 24, others = 12 Found initrd at 0xc000000001a00000:0xc000000001d70a95 U3-DART: table not allocated, using direct DMA trying to initialize btext ... boot stdout isn't a display ! Starting Linux PPC64 #2 SMP Tue Feb 21 18:46:53 UTC 2006 ----------------------------------------------------- ppc64_pft_size = 0x0 ppc64_interrupt_controller = 0x1 platform = 0x400 physicalMemorySize = 0x80000000 ppc64_caches.dcache_line_size = 0x80 ppc64_caches.icache_line_size = 0x80 htab_address = 0xc00000007c000000 htab_hash_mask = 0x3ffff ----------------------------------------------------- [boot]0100 MM Init [boot]0100 MM Init Done Linux version 2.6.15-1-powerpc64 (Debian 2.6.15-7) (waldi@debian.org) (gcc version 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 SMP Tue Feb 21 18:46:53 UTC 2006 [boot]0012 Setup Arch Top of RAM: 0x80000000, Total RAM: 0x80000000 Memory hole size: 0MB Found U3-AGP PCI host bridge. Firmware bus number: 240->255 Can't get bus-range for /ht@0,f2000000, assume bus 0 Found U3-HT PCI host bridge. Firmware bus number: 0->239 Can't get bus-range for /ht@0,f2000000 PCI Host 0, io start: 400000; io end: bfffff PCI Host 1, io start: 0; io end: 3fffff Found U3 memory controller & host bridge, revision: 53 Mapped at 0xd000080082002000 Found a K2 mac-io controller, rev: 96, mapped at 0xd000080082043000 PowerMac motherboard: XServe G5 Using native/NAP idle loop via-pmu: Server Mode is enabled PMU driver 2 initialized for Core99, firmware: 0c nvram: Checking bank 0... nvram: gen0=114, gen1=115 nvram: Active bank is: 1 nvram: OF partition at 0x410 nvram: XP partition at 0x1020 nvram: NR partition at 0x1120 On node 0 totalpages: 524288 DMA zone: 524288 pages, LIFO batch:31 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 [boot]0015 Setup Done Built 1 zonelists Kernel command line: ro ramdisk_size=10240 DEBCONF_PRIORITY=low devfs=mount,dall init=/linuxrc -- debug PowerMac using OpenPIC irq controller at 0x80040000 mpic: Setting up MPIC " OpenPIC " version 1.2 at 80040000, max 4 CPUs mpic: ISU size: 120, shift: 7, mask: 7f mpic: Initializing for 120 sources Slave OpenPIC at 0xf8040000 hooked on IRQ 56 mpic: Setting up MPIC " U3-MPIC " version 1.2 at f8040000, max 4 CPUs mpic: ISU size: 124, shift: 7, mask: 7f mpic: Initializing for 124 sources PID hash table entries: 4096 (order: 12, 131072 bytes) time_init: decrementer frequency = 33.333333 MHz time_init: processor frequency = 2000.000000 MHz Console: colour dummy device 80x25 serial8250_console_init: nothing to do on PowerMac Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) freeing bootmem node 0 Memory: 2019928k/2097152k available (3360k kernel code, 77224k reserved, 912k data, 336k bss, 232k init) Calibrating delay loop... 66.56 BogoMIPS (lpj=33280) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 PowerMac SMP probe found 2 cpus Timebase clock is Pulsar chip requesting IPIs ... IPIs requested... Processor 1 found. Brought up 2 CPUs checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 3522k freed NET: Registered protocol family 16 PCI: Probing PCI hardware Can't get ranges for PCI-PCI bridge /ht@0,f2000000/pci@1 mapping IO f0000000 -> d000080000400000, size: 800000 mapping IO f4000000 -> d000080000000000, size: 400000 PCI: Probing PCI hardware done Registering pmac pic with sysfs... nvram_init: Could not find nvram partition for nvram buffered error logging. audit: initializing netlink socket (disabled) audit(1146567771.823:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered vio_register_driver: driver hvc_console registering HVSI: registered 0 devices serial8250_init: nothing to do on PowerMac pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>) ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize MacIO PCI driver attached to K2 chipset PowerMac G5 Thermal control driver 1.2b2 Detected fan controls: 0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN 1: RPM fan, id 2, location: DRIVE BAY 2: PWM fan, id 2, location: SLOT,PCI FAN 3: RPM fan, id 3, location: CPU A INTAKE 4: RPM fan, id 4, location: CPU A EXHAUST 5: RPM fan, id 5, location: CPU B INTAKE 6: RPM fan, id 6, location: CPU B EXHAUST 9: RPM fan, id 1, location: CPU A 1 10: RPM fan, id 2, location: CPU A 2 11: RPM fan, id 3, location: CPU A 3 12: RPM fan, id 4, location: CPU B 1 13: RPM fan, id 5, location: CPU B 2 14: RPM fan, id 6, location: CPU B 3 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI: Enabling device: (0001:03:0d.0), cmd 16 ide0: Found Apple K2 ATA-6 controller, bus ID 3, irq 39 Probing IDE interface ide0... mice: PS/2 mouse device common for all mice Found KeyWest i2c on "u3", 2 channels, stepping: 4 bits Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RAMDISK: Compressed image found at block 0 VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 232k freed Failed to execute /linuxrc. Attempting defaults... Setting up filesystem, please wait ... Unable to handle kernel paging request for data at address 0xc00000007cf47200 Faulting instruction address: 0xc000000000032310 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=32 NUMA POWERMAC Modules linked in: NIP: C000000000032310 LR: C0000000000300B8 CTR: 0000000000000004 REGS: c00000007e2079a0 TRAP: 0300 Not tainted (2.6.15-1-powerpc64) MSR: 9000000000001032 <ME,IR,DR> CR: 28002842 XER: 00000000 DAR: C00000007CF47200, DSISR: 0000000040010000 TASK = c000000001a307f0[271] 'debian-installe' THREAD: c00000007e204000 CPU: 1 GPR00: 000000514FBD3B00 C00000007E207C20 C00000000042FCA0 0000000000F47200 GPR04: 0000000000000197 28A7DE9D8013C5D0 0000000000000000 0000000000000000 GPR08: 000028A7DE9D8000 000000514FBD3B00 0000000000000008 C00000007CF47200 GPR12: 100000000000D032 C00000000036B400 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000002 0000000000000000 00000000FF8E1F89 GPR24: 0000000000000000 0000000000000004 0000000000000000 000000000003FFFF GPR28: 000000028A7DE8E4 28A7DE9D8013C5D0 0000000000000000 0000000FC3DA0597 NIP [C000000000032310] .native_hpte_updatepp+0x68/0x290 LR [C0000000000300B8] .htab_call_hpte_updatepp+0x4/0x18 Call Trace: [C00000007E207C20] [C000000000032420] .native_hpte_updatepp+0x178/0x290 (unreliable) [C00000007E207CC0] [C0000000000300B8] .htab_call_hpte_updatepp+0x4/0x18 [C00000007E207DC0] [C00000000002FD48] .hash_page+0x13c/0x158 [C00000007E207E30] [C000000000004734] .do_hash_page+0x34/0x40 Instruction dump: 7cbd2b78 7d290214 78a04dc2 e9290010 e96b0000 7c094878 7d6b1a14 79283e24 419e0008 61080004 39400008 7c0006ac <7d2058a8> 7d205378 7c0059ad 40a2fff4 End of console log with Corsair voyager: . . . NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RAMDISK: Compressed image found at block 0 VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 232k freed Failed to execute /linuxrc. Attempting defaults... Setting up filesystem, please wait ... Unable to handle kernel paging request for data at address 0xc00000007c7e8880 Faulting instruction address: 0xc000000000032310 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=32 NUMA POWERMAC Modules linked in: NIP: C000000000032310 LR: C0000000000300B8 CTR: 0000000000001FEF REGS: c00000007e2079a0 TRAP: 0300 Not tainted (2.6.15-1-powerpc64) MSR: 9000000000001032 <ME,IR,DR> CR: 28002422 XER: 00000000 DAR: C00000007C7E8880, DSISR: 0000000040010000 TASK = c00000007fc637f0[243] '[' THREAD: c00000007e204000 CPU: 1 GPR00: 000001730D805FBF C00000007E207C20 C00000000042FCA0 00000000007E8880 GPR04: 0000000000000196 B986C02FDFFEC000 0000000000000000 0000000000000001 GPR08: 0000B986C02FDF80 000001730D805FBF 0000000000000008 C00000007C7E8880 GPR12: 100000000200F032 C00000000036B400 00000000FF94D8C0 0000000000000000 GPR16: 00000000F800F750 00000000F7FE5C5C 000000000FF315C4 000000000FF2D874 GPR20: 00000000F800F750 00000000FF94D89C 000000000FF3AC8C 00000000F7FFBB00 GPR24: 0000000000000000 000000000FF2C000 00000000F7FE5AB0 000000000003FFFF GPR28: 0000000B986CFD11 B986C02FDFFEC000 0000000000000000 0000000FF8B20797 NIP [C000000000032310] .native_hpte_updatepp+0x68/0x290 LR [C0000000000300B8] .htab_call_hpte_updatepp+0x4/0x18 Call Trace: [C00000007E207C20] [C00000007E207CD0] 0xc00000007e207cd0 (unreliable) [C00000007E207CC0] [C0000000000300B8] .htab_call_hpte_updatepp+0x4/0x18 [C00000007E207DC0] [C00000000002FD48] .hash_page+0x13c/0x158 [C00000007E207E30] [C000000000004734] .do_hash_page+0x34/0x40 Instruction dump: 7cbd2b78 7d290214 78a04dc2 e9290010 e96b0000 7c094878 7d6b1a14 79283e24 419e0008 61080004 39400008 7c0006ac <7d2058a8> 7d205378 7c0059ad 40a2fff4
--- End Message ---
--- Begin Message ---
- To: 364637-close@bugs.debian.org
- Subject: Bug#364637: fixed in linux-2.6 2.6.18-1
- From: Bastian Blank <waldi@debian.org>
- Date: Sun, 24 Sep 2006 11:04:47 -0700
- Message-id: <E1GRYLP-0007ZK-0X@spohr.debian.org>
Source: linux-2.6 Source-Version: 2.6.18-1 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: linux-2.6_2.6.18-1.diff.gz to pool/main/l/linux-2.6/linux-2.6_2.6.18-1.diff.gz linux-2.6_2.6.18-1.dsc to pool/main/l/linux-2.6/linux-2.6_2.6.18-1.dsc linux-2.6_2.6.18.orig.tar.gz to pool/main/l/linux-2.6/linux-2.6_2.6.18.orig.tar.gz linux-doc-2.6.18_2.6.18-1_all.deb to pool/main/l/linux-2.6/linux-doc-2.6.18_2.6.18-1_all.deb linux-headers-2.6.18-1-all-powerpc_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.18-1-all-powerpc_2.6.18-1_powerpc.deb linux-headers-2.6.18-1-all_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.18-1-all_2.6.18-1_powerpc.deb linux-headers-2.6.18-1-powerpc-miboot_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.18-1-powerpc-miboot_2.6.18-1_powerpc.deb linux-headers-2.6.18-1-powerpc-smp_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.18-1-powerpc-smp_2.6.18-1_powerpc.deb linux-headers-2.6.18-1-powerpc64_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.18-1-powerpc64_2.6.18-1_powerpc.deb linux-headers-2.6.18-1-powerpc_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.18-1-powerpc_2.6.18-1_powerpc.deb linux-headers-2.6.18-1-prep_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.18-1-prep_2.6.18-1_powerpc.deb linux-headers-2.6.18-1-vserver-powerpc64_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.18-1-vserver-powerpc64_2.6.18-1_powerpc.deb linux-headers-2.6.18-1-vserver-powerpc_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.18-1-vserver-powerpc_2.6.18-1_powerpc.deb linux-headers-2.6.18-1-vserver_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.18-1-vserver_2.6.18-1_powerpc.deb linux-headers-2.6.18-1_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.18-1_2.6.18-1_powerpc.deb linux-image-2.6.18-1-powerpc-miboot_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.18-1-powerpc-miboot_2.6.18-1_powerpc.deb linux-image-2.6.18-1-powerpc-smp_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.18-1-powerpc-smp_2.6.18-1_powerpc.deb linux-image-2.6.18-1-powerpc64_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.18-1-powerpc64_2.6.18-1_powerpc.deb linux-image-2.6.18-1-powerpc_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.18-1-powerpc_2.6.18-1_powerpc.deb linux-image-2.6.18-1-prep_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.18-1-prep_2.6.18-1_powerpc.deb linux-image-2.6.18-1-vserver-powerpc64_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.18-1-vserver-powerpc64_2.6.18-1_powerpc.deb linux-image-2.6.18-1-vserver-powerpc_2.6.18-1_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.18-1-vserver-powerpc_2.6.18-1_powerpc.deb linux-manual-2.6.18_2.6.18-1_all.deb to pool/main/l/linux-2.6/linux-manual-2.6.18_2.6.18-1_all.deb linux-patch-debian-2.6.18_2.6.18-1_all.deb to pool/main/l/linux-2.6/linux-patch-debian-2.6.18_2.6.18-1_all.deb linux-source-2.6.18_2.6.18-1_all.deb to pool/main/l/linux-2.6/linux-source-2.6.18_2.6.18-1_all.deb linux-support-2.6.18-1_2.6.18-1_all.deb to pool/main/l/linux-2.6/linux-support-2.6.18-1_2.6.18-1_all.deb linux-tree-2.6.18_2.6.18-1_all.deb to pool/main/l/linux-2.6/linux-tree-2.6.18_2.6.18-1_all.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 364637@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Bastian Blank <waldi@debian.org> (supplier of updated linux-2.6 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmaster@debian.org) -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Format: 1.7 Date: Sun, 24 Sep 2006 15:55:37 +0200 Source: linux-2.6 Binary: linux-headers-2.6.18-1-s390x linux-image-2.6.18-1-parisc64 linux-headers-2.6.18-1-k7 linux-headers-2.6.18-1-parisc linux-headers-2.6.18-1-mac linux-headers-2.6.18-1-rpc linux-headers-2.6.18-1-vserver-amd64 linux-headers-2.6.18-1-486 linux-headers-2.6.18-1-s3c2410 linux-headers-2.6.18-1-r4k-kn04 linux-image-2.6.18-1-sparc64 linux-headers-2.6.18-1-vserver-s390x linux-headers-2.6.18-1-xen-686 linux-image-2.6.18-1-r5k-ip32 linux-headers-2.6.18-1-r4k-ip22 linux-image-2.6.18-1-r3k-kn02 linux-image-2.6.18-1-mac linux-headers-2.6.18-1-alpha-legacy linux-headers-2.6.18-1-all-sparc linux-headers-2.6.18-1-all linux-headers-2.6.18-1-amd64 linux-headers-2.6.18-1-r5k-ip32 linux-headers-2.6.18-1-vserver-k7 linux-headers-2.6.18-1-all-hppa linux-manual-2.6.18 linux-headers-2.6.18-1-parisc64 linux-image-2.6.18-1-s390x linux-image-2.6.18-1-xen-k7 linux-headers-2.6.18-1-vserver linux-image-2.6.18-1-amd64 linux-image-2.6.18-1-powerpc64 linux-headers-2.6.18-1-all-amd64 linux-image-2.6.18-1-itanium linux-image-2.6.18-1-rpc linux-headers-2.6.18-1-all-alpha linux-image-2.6.18-1-s390 linux-image-2.6.18-1-r4k-kn04 linux-image-2.6.18-1-parisc-smp linux-image-2.6.18-1-powerpc-smp linux-headers-2.6.18-1-sb1a-bcm91480b linux-headers-2.6.18-1-all-arm linux-headers-2.6.18-1-all-ia64 xen-linux-system-2.6.18-1-xen-k7 linux-modules-2.6.18-1-xen-686 linux-image-2.6.18-1-686 linux-headers-2.6.18-1-r3k-kn02 linux-image-2.6.18-1-vserver-amd64 xen-linux-system-2.6.18-1-xen-amd64 linux-headers-2.6.18-1-all-powerpc linux-image-2.6.18-1-r5k-cobalt linux-headers-2.6.18-1-iop32x linux-image-2.6.18-1-vserver-powerpc linux-headers-2.6.18-1-s390 linux-headers-2.6.18-1-nslu2 linux-headers-2.6.18-1-all-mipsel linux-headers-2.6.18-1-vserver-alpha linux-headers-2.6.18-1-686 linux-image-2.6.18-1-s390-tape linux-image-2.6.18-1-r4k-ip22 xen-linux-system-2.6.18-1-xen-686 linux-image-2.6.18-1-mckinley linux-headers-2.6.18-1-itanium linux-image-2.6.18-1-vserver-k7 linux-headers-2.6.18-1-686-bigmem linux-image-2.6.18-1-xen-686 linux-headers-2.6.18-1-all-m68k linux-headers-2.6.18-1-powerpc linux-headers-2.6.18-1-vserver-686 linux-image-2.6.18-1-prep linux-headers-2.6.18-1-parisc-smp linux-headers-2.6.18-1-sparc64-smp linux-doc-2.6.18 linux-headers-2.6.18-1-xen linux-image-2.6.18-1-xen-amd64 linux-headers-2.6.18-1-amiga linux-image-2.6.18-1-sb1a-bcm91480b linux-headers-2.6.18-1-all-mips linux-headers-2.6.18-1-sparc64 linux-headers-2.6.18-1-footbridge linux-headers-2.6.18-1-sb1-bcm91250a linux-modules-2.6.18-1-xen-k7 linux-image-2.6.18-1-nslu2 linux-image-2.6.18-1-iop32x linux-image-2.6.18-1-686-bigmem linux-headers-2.6.18-1-mckinley linux-source-2.6.18 linux-headers-2.6.18-1-xen-amd64 linux-headers-2.6.18-1-alpha-smp linux-headers-2.6.18-1-powerpc64 linux-image-2.6.18-1-parisc64-smp linux-headers-2.6.18-1-vserver-powerpc linux-image-2.6.18-1-vserver-686 linux-image-2.6.18-1-sparc64-smp linux-image-2.6.18-1-alpha-generic linux-headers-2.6.18-1-vserver-powerpc64 linux-headers-2.6.18-1-r5k-cobalt linux-headers-2.6.18-1 linux-image-2.6.18-1-powerpc-miboot linux-image-2.6.18-1-footbridge linux-image-2.6.18-1-alpha-smp linux-support-2.6.18-1 linux-image-2.6.18-1-k7 linux-headers-2.6.18-1-alpha-generic linux-image-2.6.18-1-vserver-powerpc64 linux-image-2.6.18-1-sparc32 linux-image-2.6.18-1-ixp4xx linux-headers-2.6.18-1-all-s390 linux-image-2.6.18-1-powerpc linux-headers-2.6.18-1-powerpc-miboot linux-headers-2.6.18-1-ixp4xx linux-image-2.6.18-1-parisc linux-headers-2.6.18-1-all-i386 linux-headers-2.6.18-1-powerpc-smp linux-headers-2.6.18-1-sparc32 linux-patch-debian-2.6.18 linux-headers-2.6.18-1-all-armeb linux-headers-2.6.18-1-prep linux-modules-2.6.18-1-xen-amd64 linux-image-2.6.18-1-amiga linux-tree-2.6.18 linux-headers-2.6.18-1-xen-k7 linux-image-2.6.18-1-vserver-s390x linux-image-2.6.18-1-vserver-alpha linux-image-2.6.18-1-sb1-bcm91250a linux-image-2.6.18-1-s3c2410 linux-image-2.6.18-1-alpha-legacy linux-headers-2.6.18-1-parisc64-smp linux-image-2.6.18-1-486 Architecture: source all powerpc Version: 2.6.18-1 Distribution: unstable Urgency: low Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org> Changed-By: Bastian Blank <waldi@debian.org> Description: linux-doc-2.6.18 - Linux kernel specific documentation for version 2.6.18 linux-headers-2.6.18-1 - Common header files for Linux 2.6.18 linux-headers-2.6.18-1-all - All header files for Linux 2.6.18 linux-headers-2.6.18-1-all-powerpc - All header files for Linux 2.6.18 linux-headers-2.6.18-1-powerpc - Header files for Linux 2.6.18 on uniprocessor 32-bit PowerPC linux-headers-2.6.18-1-powerpc-miboot - Header files for Linux 2.6.18 on 32-bit PowerPC for miboot floppy linux-headers-2.6.18-1-powerpc-smp - Header files for Linux 2.6.18 on multiprocessor 32-bit PowerPC linux-headers-2.6.18-1-powerpc64 - Header files for Linux 2.6.18 on 64-bit PowerPC linux-headers-2.6.18-1-prep - Header files for Linux 2.6.18 on PReP PowerPC linux-headers-2.6.18-1-vserver - Common header files for Linux 2.6.18 linux-headers-2.6.18-1-vserver-powerpc - Header files for Linux 2.6.18 on uniprocessor 32-bit PowerPC linux-headers-2.6.18-1-vserver-powerpc64 - Header files for Linux 2.6.18 on 64-bit PowerPC linux-image-2.6.18-1-powerpc - Linux 2.6.18 image on uniprocessor 32-bit PowerPC linux-image-2.6.18-1-powerpc-miboot - Linux 2.6.18 image on 32-bit PowerPC for miboot floppy linux-image-2.6.18-1-powerpc-smp - Linux 2.6.18 image on multiprocessor 32-bit PowerPC linux-image-2.6.18-1-powerpc64 - Linux 2.6.18 image on 64-bit PowerPC linux-image-2.6.18-1-prep - Linux 2.6.18 image on PReP PowerPC linux-image-2.6.18-1-vserver-powerpc - Linux 2.6.18 image on uniprocessor 32-bit PowerPC linux-image-2.6.18-1-vserver-powerpc64 - Linux 2.6.18 image on 64-bit PowerPC linux-manual-2.6.18 - Linux kernel API manual pages for version 2.6.18 linux-patch-debian-2.6.18 - Debian patches to version 2.6.18 of the Linux kernel linux-source-2.6.18 - Linux kernel source for version 2.6.18 with Debian patches linux-support-2.6.18-1 - Support files for Linux 2.6.18 linux-tree-2.6.18 - Linux kernel source tree for building Debian kernel images Closes: 274808 359025 364637 366620 375035 375194 387178 Changes: linux-2.6 (2.6.18-1) unstable; urgency=low . The unpruned release . [ Martin Michlmayr ] * Bump build-dependency on kernel-package to 10.054. * arm/iop32x: Build ext2/3 as modules. * arm/iop32x: Disable CONFIG_EMBEDDED. * mipsel/r5k-cobalt: Enable ISDN. * arm/footbridge: Enable the CIFS module (closes: #274808). * arm/nslu2: Drop flavour since this machine is supported by arm/ixp4xx. * arm: Make get_unaligned() work with const pointers and GCC 4.1. * mipsel/r5k-cobalt: Enable CONFIG_BONDING as a module. * arm/iop32x: Likewise. * arm/ixp4xx: Likewise. * arm: Disable CONFIG_AUDIT for now since it's broken. . [ Sven Luther ] * [powerpc] Enabled the -prep flavour. (Closes: #359025) * [powerpc] The sisfb framebuffer device is now builtin. * [powerpc] Updated the powerpc serial patch. This fixes the XServe serial port, but at the cost powermac pcmcia serial cards support. Thanks go to Mark Hymers for providing the patch. (Closes: #364637, #375194) * [powerpc] Added patch to fix oldworld/quik booting. Thanks fo to Christian Aichinger for investigating to Benjamin Herrenschmidt for providing the patch. (Closes: #366620, #375035). * [powerpc] Fixes hvc_console caused suspsend-to-disk breakage. Thanks to Andrew Morton for providing the patch. (Closes: #387178) * [powerpc] Disabled mv643xx_eth on powerpc64 flavours, as there never was a Marvell Discovery northbrige for 64bit powerpc cpus. . [ Frederik Schüler ] * Remove obsolete options from amd64 and i386 configs. * Deactivate EVBUG. * Make PARPORT options global. * [i386] Add class definition for 486 flavour. . [ maximilian attems ] * Enable CONFIG_PRINTER=m for all powerpc flavours. * Enable the new alsa CONFIG_SND_AOA framework for powerpc. * Add the merged advansys pci table patch. . [ Bastian Blank ] * hppa: Use gcc-4.1. * Only provide 16 legacy ptys. . [ Norbert Tretkowski ] * [alpha] Updated configs. * [alpha] Disabled CONFIG_AUDIT, broken. * [alpha] Added vserver flavour. Files: 7cfa7a4fc618890bc4a48b0d8dd59ad0 5253 devel optional linux-2.6_2.6.18-1.dsc 052457145da586aec8f2ac78a68fd21d 52955400 devel optional linux-2.6_2.6.18.orig.tar.gz 75b2c092230b49b4b6a05d25fdf4b60e 1180447 devel optional linux-2.6_2.6.18-1.diff.gz dac000c1d9e7be8857b9b8cc3b1874d9 3557392 doc optional linux-doc-2.6.18_2.6.18-1_all.deb 80a23e9b0c4cfe7b380dadfa640ebdc7 1067748 doc optional linux-manual-2.6.18_2.6.18-1_all.deb 1fd98da1dc8eca5cd09d02f361217356 764910 devel optional linux-patch-debian-2.6.18_2.6.18-1_all.deb 58261414d9629540447cfb299a1733fc 41839646 devel optional linux-source-2.6.18_2.6.18-1_all.deb 13d6bd0239beb872c6712e9fd2b72a5d 249852 devel optional linux-support-2.6.18-1_2.6.18-1_all.deb e7aa003e39fb948fde4a872dc13e6e27 35332 devel optional linux-tree-2.6.18_2.6.18-1_all.deb 70567ced3a8c3b4e1ebba55a0740fa45 34992 devel optional linux-headers-2.6.18-1-all_2.6.18-1_powerpc.deb a09a0fe6824d75e74cebf74e0e37ea55 35044 devel optional linux-headers-2.6.18-1-all-powerpc_2.6.18-1_powerpc.deb a29ad8d9338e50f70c04a9adbc5fa8bf 3369112 devel optional linux-headers-2.6.18-1_2.6.18-1_powerpc.deb f1aec94b8043747c29ce78e5413486c7 16891750 admin optional linux-image-2.6.18-1-powerpc_2.6.18-1_powerpc.deb ad12c3e968ce529725ab52483ccf957b 232416 devel optional linux-headers-2.6.18-1-powerpc_2.6.18-1_powerpc.deb 02b3870c2eeb15d5daec5262d89548d9 17224504 admin optional linux-image-2.6.18-1-powerpc-smp_2.6.18-1_powerpc.deb 330858f38b253e1faa0146321b0d8b0c 232056 devel optional linux-headers-2.6.18-1-powerpc-smp_2.6.18-1_powerpc.deb f7057a4a3ae1269197178e1e9a2fa042 15440130 admin optional linux-image-2.6.18-1-powerpc-miboot_2.6.18-1_powerpc.deb b8b1264f625e282cc88e2438debbbea0 210202 devel optional linux-headers-2.6.18-1-powerpc-miboot_2.6.18-1_powerpc.deb 168315f4e82c1e9a874f9a5ce709d916 18540970 admin optional linux-image-2.6.18-1-powerpc64_2.6.18-1_powerpc.deb 2a204cc7db62dc23a6186c2933075982 232596 devel optional linux-headers-2.6.18-1-powerpc64_2.6.18-1_powerpc.deb d043d1d5ecabe7b95811a9e6a90bf653 16667936 admin optional linux-image-2.6.18-1-prep_2.6.18-1_powerpc.deb 7165e14efceed0bd0ad3babfce361645 227736 devel optional linux-headers-2.6.18-1-prep_2.6.18-1_powerpc.deb f260623a22b6513787534878b74f451c 3389894 devel optional linux-headers-2.6.18-1-vserver_2.6.18-1_powerpc.deb f3f48133022205fb66e287738e151811 17261382 admin optional linux-image-2.6.18-1-vserver-powerpc_2.6.18-1_powerpc.deb bc2dbd9c94fca51d798b0c1655df0284 232338 devel optional linux-headers-2.6.18-1-vserver-powerpc_2.6.18-1_powerpc.deb f051bcd26a08ac0262a3318bf2be70c6 18595474 admin optional linux-image-2.6.18-1-vserver-powerpc64_2.6.18-1_powerpc.deb 3f04caeb35e968dac701d5967c18dc7f 233228 devel optional linux-headers-2.6.18-1-vserver-powerpc64_2.6.18-1_powerpc.deb -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) iEYEARECAAYFAkUWp2MACgkQLkAIIn9ODhEo7wCg8nqXl7keXJB2a0RiyiZurW1P wpIAn1BfOyxBwxH9GUuVsRFU7uFwzrg8 =g+cL -----END PGP SIGNATURE-----
--- End Message ---