Bug#384098: linux-image-2.6.17-2-686: tg3 wake on lan does not work
Package: linux-image-2.6.17-2-686
Version: 2.6.17-6
Severity: normal
Wake on lan doesn't work with the tg3 driver. WOL was enabled with the ethtool,
and confirmed as on with the same tool. After shutdown the computer cannot be
woken (works fine when bcm5700 driver is used instead).
This is not a recent regression, this has never worked in any version I've tried
previously.
Richard.
02:01.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5705 Gigabit Ethernet [14e4:1653]
Subsystem: Broadcom Corporation NetXtreme BCM5705 Gigabit Ethernet [14e4:1653]
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 201
Memory at f3020000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
root@richard:~# ethtool eth0
Settings for eth0:
Supported ports: [ MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: g
Wake-on: g
Current message level: 0x000000ff (255)
Link detected: yes
-- System Information:
Debian Release: testing/unstable
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages linux-image-2.6.17-2-686 depends on:
ii module-init-tools 3.2.2-3 tools for managing Linux kernel mo
ii yaird [linux-initramfs-tool] 0.0.12-17 Yet Another mkInitRD
Versions of packages linux-image-2.6.17-2-686 recommends:
ii libc6-i686 2.3.6.ds1-2 GNU C Library: Shared libraries [i
-- debconf information excluded
Reply to: