linux-modules-extra-2.6_2.6.17-1_powerpc.changes is NEW
(new) linux-modules-extra-2.6_2.6.17-1.dsc optional devel
(new) linux-modules-extra-2.6_2.6.17-1.tar.gz optional devel
(new) redhat-cluster-modules-2.6-powerpc-miboot_1.02.00-8+2.6.17-1_powerpc.deb optional admin
Redhat Cluster infrastructure modules for Linux 2.6 on powerpc-miboot-class
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on powerpc-miboot-class machines.
(new) redhat-cluster-modules-2.6-powerpc-smp_1.02.00-8+2.6.17-1_powerpc.deb optional admin
Redhat Cluster infrastructure modules for Linux 2.6 on powerpc-smp-class
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on powerpc-smp-class machines.
(new) redhat-cluster-modules-2.6-powerpc64_1.02.00-8+2.6.17-1_powerpc.deb optional admin
Redhat Cluster infrastructure modules for Linux 2.6 on powerpc64-class
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on powerpc64-class machines.
(new) redhat-cluster-modules-2.6-powerpc_1.02.00-8+2.6.17-1_powerpc.deb optional admin
Redhat Cluster infrastructure modules for Linux 2.6 on powerpc-class
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on powerpc-class machines.
(new) redhat-cluster-modules-2.6-vserver-powerpc64_1.02.00-8+2.6.17-1_powerpc.deb optional admin
Redhat Cluster infrastructure modules for Linux 2.6 on powerpc64-class
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on powerpc64-class machines.
(new) redhat-cluster-modules-2.6-vserver-powerpc_1.02.00-8+2.6.17-1_powerpc.deb optional admin
Redhat Cluster infrastructure modules for Linux 2.6 on powerpc-class
This package depends on the Redhat Cluster infrastructure modules for
latest Linux kernel 2.6 on powerpc-class machines.
(new) redhat-cluster-modules-2.6.17-2-powerpc-miboot_1.02.00-8+2.6.17-1_powerpc.deb optional admin
Redhat Cluster infrastructure modules for Linux 2.6.17 on powerpc-miboot-class
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.17 on powerpc-miboot-class machines.
(new) redhat-cluster-modules-2.6.17-2-powerpc-smp_1.02.00-8+2.6.17-1_powerpc.deb optional admin
Redhat Cluster infrastructure modules for Linux 2.6.17 on powerpc-smp-class
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.17 on powerpc-smp-class machines.
(new) redhat-cluster-modules-2.6.17-2-powerpc64_1.02.00-8+2.6.17-1_powerpc.deb optional admin
Redhat Cluster infrastructure modules for Linux 2.6.17 on powerpc64-class
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.17 on powerpc64-class machines.
(new) redhat-cluster-modules-2.6.17-2-powerpc_1.02.00-8+2.6.17-1_powerpc.deb optional admin
Redhat Cluster infrastructure modules for Linux 2.6.17 on powerpc-class
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.17 on powerpc-class machines.
(new) redhat-cluster-modules-2.6.17-2-vserver-powerpc64_1.02.00-8+2.6.17-1_powerpc.deb optional admin
Redhat Cluster infrastructure modules for Linux 2.6.17 on powerpc64-class
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.17 on powerpc64-class machines.
(new) redhat-cluster-modules-2.6.17-2-vserver-powerpc_1.02.00-8+2.6.17-1_powerpc.deb optional admin
Redhat Cluster infrastructure modules for Linux 2.6.17 on powerpc-class
This package provides the Redhat Cluster infrastructure modules for the
Linux kernel version 2.6.17 on powerpc-class machines.
squashfs-modules-2.6-powerpc-miboot_3.0-7+2.6.17-1_powerpc.deb
to pool/main/l/linux-modules-extra-2.6/squashfs-modules-2.6-powerpc-miboot_3.0-7+2.6.17-1_powerpc.deb
squashfs-modules-2.6-powerpc-smp_3.0-7+2.6.17-1_powerpc.deb
to pool/main/l/linux-modules-extra-2.6/squashfs-modules-2.6-powerpc-smp_3.0-7+2.6.17-1_powerpc.deb
squashfs-modules-2.6-powerpc64_3.0-7+2.6.17-1_powerpc.deb
to pool/main/l/linux-modules-extra-2.6/squashfs-modules-2.6-powerpc64_3.0-7+2.6.17-1_powerpc.deb
squashfs-modules-2.6-powerpc_3.0-7+2.6.17-1_powerpc.deb
to pool/main/l/linux-modules-extra-2.6/squashfs-modules-2.6-powerpc_3.0-7+2.6.17-1_powerpc.deb
(new) squashfs-modules-2.6-vserver-powerpc64_3.0-7+2.6.17-1_powerpc.deb optional admin
Squash filesystem modules for Linux 2.6 on powerpc64-class
This package depends on the Squash filesystem modules for latest Linux
kernel 2.6 on powerpc64-class machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6-vserver-powerpc_3.0-7+2.6.17-1_powerpc.deb optional admin
Squash filesystem modules for Linux 2.6 on powerpc-class
This package depends on the Squash filesystem modules for latest Linux
kernel 2.6 on powerpc-class machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.17-2-powerpc-miboot_3.0-7+2.6.17-1_powerpc.deb optional admin
Squash filesystem modules for Linux 2.6.17 on powerpc-miboot-class
This package provides the Squash filesystem modules for the Linux kernel
version 2.6.17 on powerpc-miboot-class machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.17-2-powerpc-smp_3.0-7+2.6.17-1_powerpc.deb optional admin
Squash filesystem modules for Linux 2.6.17 on powerpc-smp-class
This package provides the Squash filesystem modules for the Linux kernel
version 2.6.17 on powerpc-smp-class machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.17-2-powerpc64_3.0-7+2.6.17-1_powerpc.deb optional admin
Squash filesystem modules for Linux 2.6.17 on powerpc64-class
This package provides the Squash filesystem modules for the Linux kernel
version 2.6.17 on powerpc64-class machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.17-2-powerpc_3.0-7+2.6.17-1_powerpc.deb optional admin
Squash filesystem modules for Linux 2.6.17 on powerpc-class
This package provides the Squash filesystem modules for the Linux kernel
version 2.6.17 on powerpc-class machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.17-2-vserver-powerpc64_3.0-7+2.6.17-1_powerpc.deb optional admin
Squash filesystem modules for Linux 2.6.17 on powerpc64-class
This package provides the Squash filesystem modules for the Linux kernel
version 2.6.17 on powerpc64-class machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) squashfs-modules-2.6.17-2-vserver-powerpc_3.0-7+2.6.17-1_powerpc.deb optional admin
Squash filesystem modules for Linux 2.6.17 on powerpc-class
This package provides the Squash filesystem modules for the Linux kernel
version 2.6.17 on powerpc-class machines.
.
Squashfs is a highly compressed read-only filesystem for Linux. It uses
zlib compression to compress both files, inodes and directories. Inodes
in the system are very small and all blocks are packed to minimise data
overhead. Block sizes greater than 4K are supported up to a maximum of
64K.
.
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
(new) unionfs-modules-2.6-powerpc-miboot_1.3+debian-3+2.6.17-1_powerpc.deb optional admin
Unionfs modules for Linux 2.6 on powerpc-miboot-class
This package depends on the Unionfs modules for latest Linux kernel 2.6 on
powerpc-miboot-class machines.
.
The unionfs driver provides a unification file system for the Linux
kernel. It allows to virtually merge the contents of several directories
and/or stack them, so that apparent file changes in the unionfs end in
file changes in only one of the source directories.
(new) unionfs-modules-2.6-powerpc-smp_1.3+debian-3+2.6.17-1_powerpc.deb optional admin
Unionfs modules for Linux 2.6 on powerpc-smp-class
This package depends on the Unionfs modules for latest Linux kernel 2.6 on
powerpc-smp-class machines.
.
The unionfs driver provides a unification file system for the Linux
kernel. It allows to virtually merge the contents of several directories
and/or stack them, so that apparent file changes in the unionfs end in
file changes in only one of the source directories.
(new) unionfs-modules-2.6-powerpc64_1.3+debian-3+2.6.17-1_powerpc.deb optional admin
Unionfs modules for Linux 2.6 on powerpc64-class
This package depends on the Unionfs modules for latest Linux kernel 2.6 on
powerpc64-class machines.
.
The unionfs driver provides a unification file system for the Linux
kernel. It allows to virtually merge the contents of several directories
and/or stack them, so that apparent file changes in the unionfs end in
file changes in only one of the source directories.
(new) unionfs-modules-2.6-powerpc_1.3+debian-3+2.6.17-1_powerpc.deb optional admin
Unionfs modules for Linux 2.6 on powerpc-class
This package depends on the Unionfs modules for latest Linux kernel 2.6 on
powerpc-class machines.
.
The unionfs driver provides a unification file system for the Linux
kernel. It allows to virtually merge the contents of several directories
and/or stack them, so that apparent file changes in the unionfs end in
file changes in only one of the source directories.
(new) unionfs-modules-2.6.17-2-powerpc-miboot_1.3+debian-3+2.6.17-1_powerpc.deb optional admin
Unionfs modules for Linux 2.6.17 on powerpc-miboot-class
This package provides the Unionfs modules for the Linux kernel version
2.6.17 on powerpc-miboot-class machines.
.
The unionfs driver provides a unification file system for the Linux
kernel. It allows to virtually merge the contents of several directories
and/or stack them, so that apparent file changes in the unionfs end in
file changes in only one of the source directories.
(new) unionfs-modules-2.6.17-2-powerpc-smp_1.3+debian-3+2.6.17-1_powerpc.deb optional admin
Unionfs modules for Linux 2.6.17 on powerpc-smp-class
This package provides the Unionfs modules for the Linux kernel version
2.6.17 on powerpc-smp-class machines.
.
The unionfs driver provides a unification file system for the Linux
kernel. It allows to virtually merge the contents of several directories
and/or stack them, so that apparent file changes in the unionfs end in
file changes in only one of the source directories.
(new) unionfs-modules-2.6.17-2-powerpc64_1.3+debian-3+2.6.17-1_powerpc.deb optional admin
Unionfs modules for Linux 2.6.17 on powerpc64-class
This package provides the Unionfs modules for the Linux kernel version
2.6.17 on powerpc64-class machines.
.
The unionfs driver provides a unification file system for the Linux
kernel. It allows to virtually merge the contents of several directories
and/or stack them, so that apparent file changes in the unionfs end in
file changes in only one of the source directories.
(new) unionfs-modules-2.6.17-2-powerpc_1.3+debian-3+2.6.17-1_powerpc.deb optional admin
Unionfs modules for Linux 2.6.17 on powerpc-class
This package provides the Unionfs modules for the Linux kernel version
2.6.17 on powerpc-class machines.
.
The unionfs driver provides a unification file system for the Linux
kernel. It allows to virtually merge the contents of several directories
and/or stack them, so that apparent file changes in the unionfs end in
file changes in only one of the source directories.
Changes: linux-modules-extra-2.6 (2.6.17-1) unstable; urgency=low
.
* Initial release.
Override entries for your package:
squashfs-modules-2.6-powerpc-miboot_3.0-7+2.6.17-1_powerpc.deb - optional admin
squashfs-modules-2.6-powerpc-smp_3.0-7+2.6.17-1_powerpc.deb - optional admin
squashfs-modules-2.6-powerpc64_3.0-7+2.6.17-1_powerpc.deb - optional admin
squashfs-modules-2.6-powerpc_3.0-7+2.6.17-1_powerpc.deb - optional admin
Announcing to debian-devel-changes@lists.debian.org
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
Reply to: