Bug#376229: linux-image-2.6.17-1-k7: Another BUG invalid opcode
Package: linux-image-2.6.17-1-k7
Version: 2.6.17-2
Followup-For: Bug #376229
I've got more info from my kernel log while booting:
Jul 10 23:03:13 smaug kernel: klogd 1.4.1#18, log source = /proc/kmsg started.
Jul 10 23:03:13 smaug kernel: Linux version 2.6.17-1-k7 (Debian 2.6.17-2) (waldi@debian.org) (gcc version 4.1.2 20060613 (prerelease) (Debian 4.1.1-5)) #1 SMP Thu Jun 29 22:32:23 UTC 2006
Jul 10 23:03:13 smaug kernel: BIOS-provided physical RAM map:
Jul 10 23:03:13 smaug kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jul 10 23:03:13 smaug kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jul 10 23:03:13 smaug kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jul 10 23:03:13 smaug kernel: BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
Jul 10 23:03:13 smaug kernel: BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
Jul 10 23:03:13 smaug kernel: BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
Jul 10 23:03:13 smaug kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Jul 10 23:03:13 smaug kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jul 10 23:03:13 smaug kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Jul 10 23:03:13 smaug kernel: 0MB HIGHMEM available.
Jul 10 23:03:13 smaug kernel: 1023MB LOWMEM available.
Jul 10 23:03:13 smaug kernel: found SMP MP-table at 000f4b80
Jul 10 23:03:13 smaug kernel: On node 0 totalpages: 262128
Jul 10 23:03:13 smaug kernel: DMA zone: 4096 pages, LIFO batch:0
Jul 10 23:03:13 smaug kernel: Normal zone: 258032 pages, LIFO batch:31
Jul 10 23:03:13 smaug kernel: DMI 2.3 present.
Jul 10 23:03:13 smaug kernel: ACPI: RSDP (v000 GBT ) @ 0x000f64f0
Jul 10 23:03:13 smaug kernel: ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
Jul 10 23:03:13 smaug kernel: ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
Jul 10 23:03:13 smaug kernel: ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff6ac0
Jul 10 23:03:13 smaug kernel: ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Jul 10 23:03:13 smaug kernel: ACPI: PM-Timer IO Port: 0x4008
Jul 10 23:03:13 smaug kernel: ACPI: Local APIC address 0xfee00000
Jul 10 23:03:13 smaug kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jul 10 23:03:13 smaug kernel: Processor #0 6:10 APIC version 16
Jul 10 23:03:13 smaug kernel: ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Jul 10 23:03:13 smaug kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jul 10 23:03:13 smaug kernel: IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Jul 10 23:03:13 smaug kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jul 10 23:03:13 smaug kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Jul 10 23:03:13 smaug kernel: ACPI: IRQ0 used by override.
Jul 10 23:03:13 smaug kernel: ACPI: IRQ2 used by override.
Jul 10 23:03:13 smaug kernel: ACPI: IRQ9 used by override.
Jul 10 23:03:13 smaug kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Jul 10 23:03:13 smaug kernel: Using ACPI (MADT) for SMP configuration information
Jul 10 23:03:13 smaug kernel: Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Jul 10 23:03:13 smaug kernel: Built 1 zonelists
Jul 10 23:03:13 smaug kernel: Kernel command line: root=/dev/hda1 ro
Jul 10 23:03:13 smaug kernel: mapped APIC to ffffd000 (fee00000)
Jul 10 23:03:13 smaug kernel: mapped IOAPIC to ffffc000 (fec00000)
Jul 10 23:03:13 smaug kernel: Enabling fast FPU save and restore... done.
Jul 10 23:03:13 smaug kernel: Enabling unmasked SIMD FPU exception support... done.
Jul 10 23:03:13 smaug kernel: Initializing CPU#0
Jul 10 23:03:13 smaug kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Jul 10 23:03:13 smaug kernel: Detected 1919.922 MHz processor.
Jul 10 23:03:13 smaug kernel: Using pmtmr for high-res timesource
Jul 10 23:03:13 smaug kernel: Console: colour VGA+ 80x25
Jul 10 23:03:13 smaug kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jul 10 23:03:13 smaug kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jul 10 23:03:13 smaug kernel: Memory: 1031720k/1048512k available (1489k kernel code, 16104k reserved, 546k data, 168k init, 0k highmem)
Jul 10 23:03:13 smaug kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jul 10 23:03:13 smaug kernel: Calibrating delay using timer specific routine.. 3843.45 BogoMIPS (lpj=7686914)
Jul 10 23:03:13 smaug kernel: Security Framework v1.0.0 initialized
Jul 10 23:03:13 smaug kernel: SELinux: Disabled at boot.
Jul 10 23:03:13 smaug kernel: Capability LSM initialized
Jul 10 23:03:13 smaug kernel: Mount-cache hash table entries: 512
Jul 10 23:03:13 smaug kernel: CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000Jul 10 23:03:13 smaug kernel: CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
Jul 10 23:03:13 smaug kernel: CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
Jul 10 23:03:13 smaug kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jul 10 23:03:13 smaug kernel: CPU: L2 Cache: 512K (64 bytes/line)
Jul 10 23:03:13 smaug kernel: CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Jul 10 23:03:13 smaug kernel: Intel machine check architecture supported.
Jul 10 23:03:13 smaug kernel: Intel machine check reporting enabled on CPU#0.
Jul 10 23:03:13 smaug kernel: Checking 'hlt' instruction... OK.
Jul 10 23:03:13 smaug kernel: SMP alternatives: switching to UP code
Jul 10 23:03:13 smaug kernel: Freeing SMP alternatives: 16k freed
Jul 10 23:03:13 smaug kernel: CPU0: AMD Unknown CPU Type stepping 00
Jul 10 23:03:13 smaug kernel: Total of 1 processors activated (3843.45 BogoMIPS).
Jul 10 23:03:13 smaug kernel: ENABLING IO-APIC IRQs
Jul 10 23:03:13 smaug kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Jul 10 23:03:13 smaug kernel: Brought up 1 CPUs
Jul 10 23:03:13 smaug kernel: migration_cost=0
Jul 10 23:03:13 smaug kernel: checking if image is initramfs... it is
Jul 10 23:03:13 smaug kernel: Freeing initrd memory: 4550k freed
Jul 10 23:03:13 smaug kernel: NET: Registered protocol family 16
Jul 10 23:03:13 smaug kernel: ACPI: bus type pci registered
Jul 10 23:03:13 smaug kernel: PCI: PCI BIOS revision 2.10 entry at 0xf9d30, last bus=1
Jul 10 23:03:13 smaug kernel: Setting up standard PCI resources
Jul 10 23:03:13 smaug kernel: ACPI: Subsystem revision 20060127
Jul 10 23:03:13 smaug kernel: ACPI: Interpreter enabled
Jul 10 23:03:13 smaug kernel: ACPI: Using IOAPIC for interrupt routing
Jul 10 23:03:13 smaug kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jul 10 23:03:13 smaug kernel: PCI: Probing PCI hardware (bus 00)
Jul 10 23:03:13 smaug kernel: ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Jul 10 23:03:13 smaug kernel: PCI quirk: region 4000-407f claimed by vt8235 PM
Jul 10 23:03:13 smaug kernel: PCI quirk: region 5000-500f claimed by vt8235 SMB
Jul 10 23:03:13 smaug kernel: Boot video device is 0000:01:00.0
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Jul 10 23:03:13 smaug kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jul 10 23:03:13 smaug kernel: pnp: PnP ACPI init
Jul 10 23:03:13 smaug kernel: pnp: PnP ACPI: found 12 devices
Jul 10 23:03:13 smaug kernel: PnPBIOS: Disabled by ACPI PNP
Jul 10 23:03:13 smaug kernel: PCI: Using ACPI for IRQ routing
Jul 10 23:03:13 smaug kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jul 10 23:03:13 smaug kernel: PCI: Bridge: 0000:00:01.0
Jul 10 23:03:13 smaug kernel: IO window: disabled.
Jul 10 23:03:13 smaug kernel: MEM window: da000000-dcffffff
Jul 10 23:03:13 smaug kernel: PREFETCH window: d8000000-d9ffffff
Jul 10 23:03:13 smaug kernel: PCI: Setting latency timer of device 0000:00:01.0 to 64
Jul 10 23:03:13 smaug kernel: NET: Registered protocol family 2
Jul 10 23:03:13 smaug kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 10 23:03:13 smaug kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jul 10 23:03:13 smaug kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jul 10 23:03:13 smaug kernel: TCP: Hash tables configured (established 131072 bind 65536)
Jul 10 23:03:13 smaug kernel: TCP reno registered
Jul 10 23:03:13 smaug kernel: audit: initializing netlink socket (disabled)
Jul 10 23:03:13 smaug kernel: audit(1152586953.632:1): initialized
Jul 10 23:03:13 smaug kernel: VFS: Disk quotas dquot_6.5.1
Jul 10 23:03:13 smaug kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jul 10 23:03:13 smaug kernel: Initializing Cryptographic API
Jul 10 23:03:13 smaug kernel: io scheduler noop registered
Jul 10 23:03:13 smaug kernel: io scheduler anticipatory registered (default)
Jul 10 23:03:13 smaug kernel: io scheduler deadline registered
Jul 10 23:03:13 smaug kernel: io scheduler cfq registered
Jul 10 23:03:13 smaug kernel: isapnp: Scanning for PnP cards...
Jul 10 23:03:13 smaug kernel: isapnp: No Plug & Play device found
Jul 10 23:03:13 smaug kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jul 10 23:03:13 smaug kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 10 23:03:13 smaug kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jul 10 23:03:13 smaug kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Jul 10 23:03:13 smaug kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Jul 10 23:03:13 smaug kernel: PNP: PS/2 controller doesn't have AUX irq; using default 12
Jul 10 23:03:13 smaug kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jul 10 23:03:13 smaug kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 10 23:03:13 smaug kernel: TCP bic registered
Jul 10 23:03:13 smaug kernel: NET: Registered protocol family 1
Jul 10 23:03:13 smaug kernel: NET: Registered protocol family 17
Jul 10 23:03:13 smaug kernel: NET: Registered protocol family 8
Jul 10 23:03:13 smaug kernel: NET: Registered protocol family 20
Jul 10 23:03:13 smaug kernel: Using IPI No-Shortcut mode
Jul 10 23:03:13 smaug kernel: ACPI wakeup devices:
Jul 10 23:03:13 smaug kernel: PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 UAR1 LPT1
Jul 10 23:03:13 smaug kernel: ACPI: (supports S0 S1 S4 S5)
Jul 10 23:03:13 smaug kernel: Freeing unused kernel memory: 168k freed
Jul 10 23:03:13 smaug kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Jul 10 23:03:13 smaug kernel: SCSI subsystem initialized
Jul 10 23:03:13 smaug kernel: libata version 1.20 loaded.
Jul 10 23:03:13 smaug kernel: ACPI: CPU0 (power states: C1[C1] C2[C2])
Jul 10 23:03:13 smaug kernel: ACPI: Processor [CPU0] (supports 2 throttling states)
Jul 10 23:03:13 smaug kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jul 10 23:03:13 smaug kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jul 10 23:03:13 smaug kernel: VP_IDE: IDE controller at PCI slot 0000:00:11.1
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
Jul 10 23:03:13 smaug kernel: PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 9
Jul 10 23:03:13 smaug kernel: VP_IDE: chipset revision 6
Jul 10 23:03:13 smaug kernel: VP_IDE: not 100%% native mode: will probe irqs later
Jul 10 23:03:13 smaug kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
Jul 10 23:03:13 smaug kernel: ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:pio
Jul 10 23:03:13 smaug kernel: ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:pio
Jul 10 23:03:13 smaug kernel: Probing IDE interface ide0...
Jul 10 23:03:13 smaug kernel: usbcore: registered new driver usbfs
Jul 10 23:03:13 smaug kernel: usbcore: registered new driver hub
Jul 10 23:03:13 smaug kernel: 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Jul 10 23:03:13 smaug kernel: USB Universal Host Controller Interface driver v3.0
Jul 10 23:03:13 smaug kernel: hda: ST3250823A, ATA DISK drive
Jul 10 23:03:13 smaug kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 10 23:03:13 smaug kernel: Probing IDE interface ide1...
Jul 10 23:03:13 smaug kernel: hdc: LITE-ON LTR-40125S, ATAPI CD/DVD-ROM drive
Jul 10 23:03:13 smaug kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jul 10 23:03:13 smaug kernel: 8139cp: pci dev 0000:00:13.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
Jul 10 23:03:13 smaug kernel: 8139cp: Try the "8139too" driver instead.
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Jul 10 23:03:13 smaug kernel: ehci_hcd 0000:00:10.3: EHCI Host Controller
Jul 10 23:03:13 smaug kernel: ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
Jul 10 23:03:13 smaug kernel: ehci_hcd 0000:00:10.3: irq 177, io mem 0xdd000000
Jul 10 23:03:13 smaug kernel: ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jul 10 23:03:13 smaug kernel: usb usb1: configuration #1 chosen from 1 choice
Jul 10 23:03:13 smaug kernel: hub 1-0:1.0: USB hub found
Jul 10 23:03:13 smaug kernel: hub 1-0:1.0: 6 ports detected
Jul 10 23:03:13 smaug kernel: 8139too Fast Ethernet driver 0.9.27
Jul 10 23:03:13 smaug kernel: hda: max request size: 512KiB
Jul 10 23:03:13 smaug kernel: hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
Jul 10 23:03:13 smaug kernel: hda: cache flushes supported
Jul 10 23:03:13 smaug kernel: hda: hda1 hda2
Jul 10 23:03:13 smaug kernel: hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jul 10 23:03:13 smaug kernel: Uniform CD-ROM driver Revision: 3.20
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Jul 10 23:03:13 smaug kernel: PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 1
Jul 10 23:03:13 smaug kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Jul 10 23:03:13 smaug kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Jul 10 23:03:13 smaug kernel: uhci_hcd 0000:00:10.0: irq 177, io base 0x0000d000
Jul 10 23:03:13 smaug kernel: usb usb2: configuration #1 chosen from 1 choice
Jul 10 23:03:13 smaug kernel: hub 2-0:1.0: USB hub found
Jul 10 23:03:13 smaug kernel: hub 2-0:1.0: 2 ports detected
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Jul 10 23:03:13 smaug kernel: PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 1
Jul 10 23:03:13 smaug kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Jul 10 23:03:13 smaug kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Jul 10 23:03:13 smaug kernel: uhci_hcd 0000:00:10.1: irq 177, io base 0x0000d400
Jul 10 23:03:13 smaug kernel: usb usb3: configuration #1 chosen from 1 choice
Jul 10 23:03:13 smaug kernel: hub 3-0:1.0: USB hub found
Jul 10 23:03:13 smaug kernel: hub 3-0:1.0: 2 ports detected
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Jul 10 23:03:13 smaug kernel: PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 1
Jul 10 23:03:13 smaug kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Jul 10 23:03:13 smaug kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Jul 10 23:03:13 smaug kernel: uhci_hcd 0000:00:10.2: irq 177, io base 0x0000d800
Jul 10 23:03:13 smaug kernel: usb usb4: configuration #1 chosen from 1 choice
Jul 10 23:03:13 smaug kernel: hub 4-0:1.0: USB hub found
Jul 10 23:03:13 smaug kernel: hub 4-0:1.0: 2 ports detected
Jul 10 23:03:13 smaug kernel: ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 185
Jul 10 23:03:13 smaug kernel: eth0: RealTek RTL8139 at 0xe400, 00:20:ed:bc:e8:a8, IRQ 185
Jul 10 23:03:13 smaug kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Jul 10 23:03:13 smaug kernel: Attempting manual resume
Jul 10 23:03:13 smaug kernel: kjournald starting. Commit interval 5 seconds
Jul 10 23:03:13 smaug kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jul 10 23:03:13 smaug kernel: usb 2-1: new full speed USB device using uhci_hcd and address 2
Jul 10 23:03:13 smaug kernel: usb 2-1: configuration #1 chosen from 1 choice
Jul 10 23:03:13 smaug kernel: usb 2-2: new full speed USB device using uhci_hcd and address 3
Jul 10 23:03:13 smaug kernel: usb 2-2: configuration #1 chosen from 1 choice
Jul 10 23:03:13 smaug kernel: hub 2-2:1.0: USB hub found
Jul 10 23:03:13 smaug kernel: hub 2-2:1.0: 4 ports detected
Jul 10 23:03:13 smaug kernel: usb 2-2.2: new low speed USB device using uhci_hcd and address 4
Jul 10 23:03:13 smaug kernel: usb 2-2.2: configuration #1 chosen from 1 choice
Jul 10 23:03:13 smaug kernel: ------------[ cut here ]------------
Jul 10 23:03:13 smaug kernel: kernel BUG at :64137!
Jul 10 23:03:13 smaug kernel: invalid opcode: 0000 [#1]
Jul 10 23:03:13 smaug kernel: SMP
Jul 10 23:03:13 smaug kernel: Modules linked in: ext3 jbd mbcache ide_cd cdrom ide_disk 8139too uhci_hcd ehci_hcd 8139cp mii usbcore via82cxxx generic ide_core thermal processor fan sata_sil libata scsi_mod
Jul 10 23:03:13 smaug kernel: CPU: 0
Jul 10 23:03:13 smaug kernel: EIP: 0060:[<b0125863>] Not tainted VLI
Jul 10 23:03:13 smaug kernel: EFLAGS: 00010002 (2.6.17-1-k7 #1)
Jul 10 23:03:13 smaug kernel: EIP is at specific_send_sig_info+0x22/0x88
Jul 10 23:03:13 smaug kernel: eax: efc10501 ebx: dfc17540 ecx: dfc17540 edx: df9ddefc
Jul 10 23:03:13 smaug kernel: esi: df9ddefc edi: 0000000b ebp: df9ddefc esp: df9dded8
Jul 10 23:03:13 smaug kernel: ds: 007b es: 007b ss: 0068
Jul 10 23:03:13 smaug kernel: Process modprobe (pid: 3236, threadinfo=df9dc000 task=dfc17540)
Jul 10 23:03:13 smaug kernel: Stack: 0000000b dfc17540 00000286 b0125ab1 df9e3774 00030001 efc1dc7c 00200008
Jul 10 23:03:13 smaug kernel: b01149da 0000000b 00000000 00030001 00200008 ffffffff efe7f760 00000000
Jul 10 23:03:13 smaug kernel: 00000000 00000000 00000000 dfc17540 00000000 00000000 00000000 dfc17540
Jul 10 23:03:13 smaug kernel: Call Trace:
Jul 10 23:03:13 smaug kernel: <b0125ab1> force_sig_info+0x5b/0x76 <b01149da> force_sig_info_fault+0x24/0x28
Jul 10 23:03:13 smaug kernel: <b012c08f> autoremove_wake_function+0x0/0x2d <b0115026> do_page_fault+0x51d/0x526
Jul 10 23:03:13 smaug kernel: <b0114b09> do_page_fault+0x0/0x526 <b01036f7> error_code+0x4f/0x54
Jul 10 23:03:13 smaug kernel: Code: 5b 0f 95 c2 e9 c3 ff ff ff 57 89 c7 56 89 d6 53 89 cb 9c 58 f6 c4 02 74 02 0f 0b 8b 83 50 04 00 00 8a 80 04 05 00 00 84 c0 7e 02 <0f> 0b 89 fa 89 d8 e8 bb ec ff ff 85 c0 75 4f 83 ff 1f 7f 10 8d
Jul 10 23:03:13 smaug kernel: EIP: [<b0125863>] specific_send_sig_info+0x22/0x88 SS:ESP 0068:df9dded8
Jul 10 23:03:13 smaug kernel: <6>usbcore: registered new driver hiddev
Jul 10 23:03:13 smaug kernel: input: Kensington Kensington USB/PS2 Wheel Mouse as /class/input/input1
Jul 10 23:03:13 smaug kernel: input: USB HID v1.10 Mouse [Kensington Kensington USB/PS2 Wheel Mouse] on usb-0000:00:10.0-2.2
Jul 10 23:03:13 smaug kernel: usbcore: registered new driver usbhid
Jul 10 23:03:13 smaug kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jul 10 23:03:13 smaug kernel: parport: PnPBIOS parport detected.
Jul 10 23:03:13 smaug kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Jul 10 23:03:13 smaug kernel: 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 10 23:03:13 smaug kernel: 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jul 10 23:03:13 smaug kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0
pid 0x8604
Jul 10 23:03:13 smaug kernel: usbcore: registered new driver usblp
Jul 10 23:03:13 smaug kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Jul 10 23:03:13 smaug kernel: irda_init()
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-k7
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages linux-image-2.6.17-1-k7 depends on:
ii initramfs-tools [linux-initra 0.60 tools for generating an initramfs
ii module-init-tools 3.2.2-3 tools for managing Linux kernel mo
ii yaird [linux-initramfs-tool] 0.0.12-15 Yet Another mkInitRD
Versions of packages linux-image-2.6.17-1-k7 recommends:
ii libc6-i686 2.3.6-15 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.17-1-k7/postinst/bootloader-error-2.6.17-1-k7:
linux-image-2.6.17-1-k7/prerm/removing-running-kernel-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/postinst/kimage-is-a-directory:
linux-image-2.6.17-1-k7/preinst/bootloader-initrd-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/postinst/old-dir-initrd-link-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/preinst/abort-overwrite-2.6.17-1-k7:
linux-image-2.6.17-1-k7/preinst/initrd-2.6.17-1-k7:
linux-image-2.6.17-1-k7/preinst/failed-to-move-modules-2.6.17-1-k7:
linux-image-2.6.17-1-k7/postinst/depmod-error-initrd-2.6.17-1-k7: false
linux-image-2.6.17-1-k7/postinst/old-initrd-link-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/postinst/create-kimage-link-2.6.17-1-k7: true
* linux-image-2.6.17-1-k7/preinst/already-running-this-2.6.17-1-k7:
linux-image-2.6.17-1-k7/preinst/lilo-has-ramdisk:
linux-image-2.6.17-1-k7/preinst/elilo-initrd-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/preinst/overwriting-modules-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/postinst/old-system-map-link-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/preinst/abort-install-2.6.17-1-k7:
linux-image-2.6.17-1-k7/prerm/would-invalidate-boot-loader-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/postinst/bootloader-test-error-2.6.17-1-k7:
linux-image-2.6.17-1-k7/preinst/lilo-initrd-2.6.17-1-k7: true
linux-image-2.6.17-1-k7/postinst/depmod-error-2.6.17-1-k7: false
Reply to: