Bug#377062: Oops (NULL pointer dereference) on linux-image-2.6.17-1-amd64-k8
Package: linux-image-2.6.17-1-amd64-k8
Version: 2.6.17-2
Severity: normal
Ksymoops output below:
Unable to handle kernel NULL pointer dereference at 0000000000000080 RIP:
<ffffffff8021464b>{__page_set_anon_rmap+0}
Oops: 0000 [1]
CPU 0
Pid: 21650, comm: abiword Not tainted 2.6.17-1-amd64-k8 #1
RIP: 0010:[<ffffffff8021464b>] <ffffffff8021464b>{__page_set_anon_rmap+0}
Using defaults from ksymoops -t elf64-x86-64 -a i386:x86-64
RSP: 0000:ffff810027ad9df0 EFLAGS: 00010297
RAX: 0000000000000004 RBX: 800000001b4f0067 RCX: ffff810000000000
RDX: 0000000003e20008 RSI: 0000000000000000 RDI: ffff8100015f9480
RBP: ffff8100015f9480 R08: 0000000000000000 R09: 0000000000007b64
R10: 0000000000000000 R11: 0000000000000001 R12: ffff810009117ad8
R13: ffff81002371b100 R14: 0000000003e20008 R15: ffff81003f2e1b80
FS: 00002b4f53603100(0000) GS:ffffffff804cc000(0000) knlGS:00000000f72b09d0
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000080 CR3: 000000000e7f6000 CR4: 00000000000006e0
ffff81003b2ca0f8 0000000000000000 0000000300000007 0000000400000001
0000000800000001 0000000c00000003
Call Trace: <ffffffff80208298>{__handle_mm_fault+562}
<ffffffff8020a0c4>{do_page_fault+1082} <ffffffff802247fe>{do_brk+452}
<ffffffff803a5328>{unix_ioctl+173} <ffffffff8035e056>{sock_ioctl+449}
<ffffffff80252611>{error_exit+0}
Code: 48 8b 86 80 00 00 00 48 85 c0 75 0a 0f 0b 68 fa 0d 3d 80 c2
>>RIP; ffffffff8021464b <__page_set_anon_rmap+0/3f> <=====
>>RBX; 800000001b4f0067 <phys_startup_64+800000001b2eff67/ffffffff7fffff00>
>>RCX; ffff810000000000 <phys_startup_64+ffff80ffffdfff00/ffffffff7fffff00>
>>RDX; 0000000003e20008 <phys_startup_64+3c1ff08/ffffffff7fffff00>
>>RDI; ffff8100015f9480 <phys_startup_64+ffff8100013f9380/ffffffff7fffff00>
>>RBP; ffff8100015f9480 <phys_startup_64+ffff8100013f9380/ffffffff7fffff00>
>>R12; ffff810009117ad8 <phys_startup_64+ffff810008f179d8/ffffffff7fffff00>
>>R13; ffff81002371b100 <phys_startup_64+ffff81002351b000/ffffffff7fffff00>
>>R14; 0000000003e20008 <phys_startup_64+3c1ff08/ffffffff7fffff00>
>>R15; ffff81003f2e1b80 <phys_startup_64+ffff81003f0e1a80/ffffffff7fffff00>
Trace; ffffffff80208298 <__handle_mm_fault+232/843>
Trace; ffffffff8020a0c4 <do_page_fault+43a/7b5>
Trace; ffffffff803a5328 <unix_ioctl+ad/b4>
Trace; ffffffff80252611 <error_exit+0/84>
Code; ffffffff8021464b <__page_set_anon_rmap+0/3f>
0000000000000000 <_RIP>:
Code; ffffffff8021464b <__page_set_anon_rmap+0/3f> <=====
0: 48 8b 86 80 00 00 00 mov 0x80(%rsi),%rax <=====
Code; ffffffff80214652 <__page_set_anon_rmap+7/3f>
7: 48 85 c0 test %rax,%rax
Code; ffffffff80214655 <__page_set_anon_rmap+a/3f>
a: 75 0a jne 16 <_RIP+0x16>
Code; ffffffff80214657 <__page_set_anon_rmap+c/3f>
c: 0f 0b ud2a
Code; ffffffff80214659 <__page_set_anon_rmap+e/3f>
e: 68 fa 0d 3d 80 pushq $0xffffffff803d0dfa
Code; ffffffff8021465e <__page_set_anon_rmap+13/3f>
13: c2 00 00 retq $0x0
CR2: 0000000000000080
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 31
model name : AMD Athlon(tm) 64 Processor 3000+
stepping : 0
cpu MHz : 1809.279
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow lahf_lm
bogomips : 3620.78
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp
# lsmod
Module Size Used by
nls_iso8859_1 5696 1
isofs 37452 1
ipv6 271840 17
ipip 11944 0
tunnel4 4168 1 ipip
dm_mod 62256 0
ide_generic 1600 0 [permanent]
snd_intel8x0 36648 3
snd_ac97_codec 111512 1 snd_intel8x0
snd_ac97_bus 3072 1 snd_ac97_codec
snd_pcm_oss 44960 0
snd_mixer_oss 18880 1 snd_pcm_oss
snd_mpu401 9704 0
snd_mpu401_uart 8960 1 snd_mpu401
analog 11488 0
snd_rawmidi 28192 1 snd_mpu401_uart
snd_seq_device 9872 1 snd_rawmidi
ns558 5760 0
snd_pcm 96460 4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 25416 2 snd_pcm
psmouse 43344 0
snd 63720 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer
evdev 11712 0
gameport 17168 3 analog,ns558
i2c_nforce2 8128 0
soundcore 11616 1 snd
snd_page_alloc 11024 2 snd_intel8x0,snd_pcm
serio_raw 7940 0
pcspkr 3456 0
parport_pc 38184 0
parport 41868 1 parport_pc
i2c_core 24856 1 i2c_nforce2
floppy 66504 0
ext3 139536 1
jbd 58600 1 ext3
mbcache 10056 1 ext3
ide_cd 42592 1
cdrom 37480 1 ide_cd
ide_disk 17472 3
sata_nv 11204 0
libata 75800 1 sata_nv
scsi_mod 155632 1 libata
amd74xx 15344 0 [permanent]
generic 5764 0 [permanent]
ohci_hcd 20932 0
ehci_hcd 32712 0
ide_core 147616 5 ide_generic,ide_cd,ide_disk,amd74xx,generic
forcedeth 31116 0
thermal 16464 0
processor 26580 1 thermal
fan 5640 0
Regards,
Vitaliy
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing'), (300, 'unstable'), (200, 'dapper')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-1-amd64-k8
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6.17-1-amd64-k8 depends on:
ii e2fsprogs 1.39-1 ext2 file system utilities and lib
ii initramfs-tools [linux-initra 0.66 tools for generating an initramfs
ii module-init-tools 3.2.2-3 tools for managing Linux kernel mo
linux-image-2.6.17-1-amd64-k8 recommends no packages.
-- debconf information:
linux-image-2.6.17-1-amd64-k8/preinst/elilo-initrd-2.6.17-1-amd64-k8: true
linux-image-2.6.17-1-amd64-k8/postinst/create-kimage-link-2.6.17-1-amd64-k8: true
linux-image-2.6.17-1-amd64-k8/prerm/would-invalidate-boot-loader-2.6.17-1-amd64-k8: true
linux-image-2.6.17-1-amd64-k8/preinst/abort-install-2.6.17-1-amd64-k8:
linux-image-2.6.17-1-amd64-k8/preinst/bootloader-initrd-2.6.17-1-amd64-k8: true
linux-image-2.6.17-1-amd64-k8/postinst/old-system-map-link-2.6.17-1-amd64-k8: true
linux-image-2.6.17-1-amd64-k8/preinst/failed-to-move-modules-2.6.17-1-amd64-k8:
linux-image-2.6.17-1-amd64-k8/postinst/old-dir-initrd-link-2.6.17-1-amd64-k8: true
linux-image-2.6.17-1-amd64-k8/postinst/depmod-error-2.6.17-1-amd64-k8: false
linux-image-2.6.17-1-amd64-k8/postinst/bootloader-error-2.6.17-1-amd64-k8:
linux-image-2.6.17-1-amd64-k8/preinst/abort-overwrite-2.6.17-1-amd64-k8:
linux-image-2.6.17-1-amd64-k8/preinst/overwriting-modules-2.6.17-1-amd64-k8: true
linux-image-2.6.17-1-amd64-k8/preinst/lilo-initrd-2.6.17-1-amd64-k8: true
linux-image-2.6.17-1-amd64-k8/postinst/bootloader-test-error-2.6.17-1-amd64-k8:
linux-image-2.6.17-1-amd64-k8/preinst/lilo-has-ramdisk:
linux-image-2.6.17-1-amd64-k8/postinst/old-initrd-link-2.6.17-1-amd64-k8: true
linux-image-2.6.17-1-amd64-k8/postinst/depmod-error-initrd-2.6.17-1-amd64-k8: false
linux-image-2.6.17-1-amd64-k8/preinst/already-running-this-2.6.17-1-amd64-k8:
linux-image-2.6.17-1-amd64-k8/postinst/kimage-is-a-directory:
linux-image-2.6.17-1-amd64-k8/prerm/removing-running-kernel-2.6.17-1-amd64-k8: true
linux-image-2.6.17-1-amd64-k8/preinst/initrd-2.6.17-1-amd64-k8:
Bootdata ok (command line is root=/dev/hda3 ro console=tty0 )
Linux version 2.6.17-1-amd64-k8 (Debian 2.6.17-2) (waldi@debian.org) (gcc version 4.1.2 20060613 (prerelease) (Debian 4.1.1-5)) #1 Thu Jun 29 22:46:10 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7560
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff30c0
ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000003fff9880
ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff9980
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff97c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
On node 0 totalpages: 257420
DMA zone: 2915 pages, LIFO batch:0
DMA32 zone: 254505 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Checking aperture...
CPU 0: aperture @ 428000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Built 1 zonelists
Kernel command line: root=/dev/hda3 ro console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 1809.279 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 1022832k/1048512k available (1722k kernel code, 24972k reserved, 783k data, 156k init)
Calibrating delay using timer specific routine.. 3620.78 BogoMIPS (lpj=7241569)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Using local APIC timer interrupts.
result 12564446
Detected 12.564 MHz APIC timer.
testing NMI watchdog ... OK.
checking if image is initramfs... it is
Freeing initrd memory: 4922k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: No mmconfig possible on device 0:18
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A08
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0401
pnp: ACPI device : hid PNP0F13
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNPB006
pnp: ACPI device : hid PNPB02F
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: PnP ACPI: found 16 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
PCI-DMA: Disabling IOMMU.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
pnp: 00:01: ioport range 0x4400-0x447f has been reserved
pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:01: ioport range 0x4800-0x487f has been reserved
pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
pnp: match found with the PnP device '00:02' and the driver 'system'
pnp: match found with the PnP device '00:0e' and the driver 'system'
pnp: match found with the PnP device '00:0f' and the driver 'system'
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: c8000000-cfffffff
PREFETCH window: c0000000-c7ffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1152044253.832:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:08' and the driver 'serial'
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
isa bounce pool size: 16 pages
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
usbmon: debugfs is not available
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:0b' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:0a' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI wakeup devices:
HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 PS2M PS2K
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 156k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (40 C)
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
GSI 16 sharing vector 0xD9 and IRQ 16
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
GSI 17 sharing vector 0xE1 and IRQ 17
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 225, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
GSI 18 sharing vector 0xE9 and IRQ 18
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 233, io mem 0xd0004000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
SCSI subsystem initialized
libata version 1.20 loaded.
sata_nv 0000:00:07.0: version 0.8
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
GSI 19 sharing vector 0x32 and IRQ 19
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 50
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 50
ata1: SATA link down (SStatus 0)
scsi0 : sata_nv
ata2: SATA link down (SStatus 0)
scsi1 : sata_nv
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 217
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 217
ata3: SATA link down (SStatus 0)
scsi2 : sata_nv
ata4: SATA link down (SStatus 0)
scsi3 : sata_nv
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: SAMSUNG SP1203N, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: _NEC DV-5800C, ATAPI CD/DVD-ROM drive
hdd: BENQ DVD DD DW1620, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:09' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
pnp: the driver 'ns558' has been registered
pnp: match found with the PnP device '00:0d' and the driver 'ns558'
gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 913kHz
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:04.0 to 64
intel8x0_measure_ac97_clock: measured 54624 usecs
intel8x0: clocking to 46960
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
pnp: the driver 'mpu401' has been registered
pnp: match found with the PnP device '00:0c' and the driver 'mpu401'
Adding 987988k swap on /dev/hda2. Priority:-1 extents:1 across:987988k
EXT3 FS on hda3, internal journal
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
IPv4 over IPv4 tunneling driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 64
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
Unable to handle kernel NULL pointer dereference at 0000000000000080 RIP:
<ffffffff8021464b>{__page_set_anon_rmap+0}
PGD 31de3067 PUD 3b2ca067 PMD 0
Oops: 0000 [1]
CPU 0
Modules linked in: nls_iso8859_1 isofs ipv6 ipip tunnel4 dm_mod ide_generic snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_mpu401 snd_mpu401_uart analog snd_rawmidi snd_seq_device ns558 snd_pcm snd_timer psmouse snd evdev gameport i2c_nforce2 soundcore snd_page_alloc serio_raw pcspkr parport_pc parport i2c_core floppy ext3 jbd mbcache ide_cd cdrom ide_disk sata_nv libata scsi_mod amd74xx generic ohci_hcd ehci_hcd ide_core forcedeth thermal processor fan
Pid: 21650, comm: abiword Not tainted 2.6.17-1-amd64-k8 #1
RIP: 0010:[<ffffffff8021464b>] <ffffffff8021464b>{__page_set_anon_rmap+0}
RSP: 0000:ffff810027ad9df0 EFLAGS: 00010297
RAX: 0000000000000004 RBX: 800000001b4f0067 RCX: ffff810000000000
RDX: 0000000003e20008 RSI: 0000000000000000 RDI: ffff8100015f9480
RBP: ffff8100015f9480 R08: 0000000000000000 R09: 0000000000007b64
R10: 0000000000000000 R11: 0000000000000001 R12: ffff810009117ad8
R13: ffff81002371b100 R14: 0000000003e20008 R15: ffff81003f2e1b80
FS: 00002b4f53603100(0000) GS:ffffffff804cc000(0000) knlGS:00000000f72b09d0
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000080 CR3: 000000000e7f6000 CR4: 00000000000006e0
Process abiword (pid: 21650, threadinfo ffff810027ad8000, task ffff810015597450)
Stack: ffffffff80208298 0000000000000cc9 0000000103e3e000 0000000000000100
ffff81003b2ca0f8 0000000000000000 0000000300000007 0000000400000001
0000000800000001 0000000c00000003
Call Trace: <ffffffff80208298>{__handle_mm_fault+562}
<ffffffff8020a0c4>{do_page_fault+1082} <ffffffff802247fe>{do_brk+452}
<ffffffff803a5328>{unix_ioctl+173} <ffffffff8035e056>{sock_ioctl+449}
<ffffffff80252611>{error_exit+0}
Code: 48 8b 86 80 00 00 00 48 85 c0 75 0a 0f 0b 68 fa 0d 3d 80 c2
RIP <ffffffff8021464b>{__page_set_anon_rmap+0} RSP <ffff810027ad9df0>
CR2: 0000000000000080
Reply to: