[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#374325: marked as done (linux-image-2.6.16-2-686: prism2 pc-card not workng)



Your message dated Mon, 3 Jul 2006 01:00:18 +0200
with message-id <20060702230018.GA5121@nighthawk.chemicalconnection.dyndns.org>
and subject line linux-image-2.6.16-2-686: prism2 pc-card not working
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---
Package: linux-image-2.6.16-2-686
Version: 2.6.16-14
Severity: normal

Hi,

I've got an ALLNET 0192 pc-card:

PRODID_1="PCMCIA"
PRODID_2="11M WLAN Card v2.5"
PRODID_3="ISL37300P"
PRODID_4="RevA"
MANFID=0274,1612

This card is about three years old, and used to work with the
linux-wlan-ng drivers back in the days (and also with hostap when I
tried intermittedly).  It is working fine on Ubuntu breezy (2.6.12)
using the orinoco_cs driver:

orinoco_cs              8936  1
orinoco                40748  1 orinoco_cs
hermes                  7328  2 orinoco_cs,orinoco
pcmcia                 27176  5 orinoco_cs
pcmcia_core            50788  4 orinoco_cs,pcmcia,yenta_socket,rsrc_nonstatic

On current unstable, both the hostap_cs and orinoco_cs drivers are
getting loaded, and they don't use pcmcia_core:

hostap_cs              53588  0
hostap                 99140  1 hostap_cs
orinoco_cs             16420  0
orinoco                34452  1 orinoco_cs
hermes                  7136  2 orinoco_cs,orinoco
firmware_class          9472  1 pcmcia
pcmcia                 34844  2 hostap_cs,orinoco_cs
pcmcia_core            37232  3 pcmcia,yenta_socket,rsrc_nonstatic

in syslog:

Jun 18 17:22:58 nighthawk kernel: pccard: PCMCIA card inserted into slot 1
Jun 18 17:22:58 nighthawk kernel: pcmcia: registering new device pcmcia1.0
Jun 18 17:22:58 nighthawk kernel: orinoco 0.15rc3 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
Jun 18 17:22:58 nighthawk kernel: orinoco_cs 0.15rc3 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
Jun 18 17:22:58 nighthawk kernel: eth1: Hardware identity 800c:0000:0001:0000
Jun 18 17:22:58 nighthawk kernel: eth1: Station identity  001f:0005:0001:0003
Jun 18 17:22:58 nighthawk kernel: eth1: Firmware determined as Intersil 1.3.5
Jun 18 17:22:58 nighthawk kernel: eth1: Ad-hoc demo mode supported
Jun 18 17:22:58 nighthawk kernel: eth1: IEEE standard IBSS ad-hoc mode supported
Jun 18 17:22:58 nighthawk kernel: eth1: WEP supported, 104-bit key
Jun 18 17:22:58 nighthawk kernel: eth1: MAC address 00:02:DD:34:B7:04
Jun 18 17:22:58 nighthawk kernel: eth1: Station name "Prism  I"
Jun 18 17:22:58 nighthawk kernel: eth1: ready
Jun 18 17:22:58 nighthawk kernel: eth1: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
Jun 18 17:22:59 nighthawk kernel: ieee80211_crypt: registered algorithm 'NULL'
Jun 18 17:22:59 nighthawk kernel: hostap_cs: 0.4.4-kernel (Jouni Malinen <jkmaline@cc.hut.fi>)
Jun 18 17:22:59 nighthawk kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready

dhcp client is then called, but no offers recieved.

However, iwconfig shows reasonable (to me) output:

eth1      IEEE 802.11b  ESSID:"Chemical Connections"  Nickname:"Prism I"
          Mode:Managed  Frequency:2.427 GHz  Access Point: 00:0F:66:D9:98:DB
          Bit Rate:2 Mb/s   Sensitivity:1/3
          Retry min limit:8   RTS thr:off   Fragment thr:off
          Encryption key:XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX   Security mode:open
          Power Management:off
          Link Quality=92/92  Signal level=5/153  Noise level=107/153
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

On ifdown I get:

Error for wireless request "Set Mode" (8B06) :
    SET failed on device eth1 ; Operation not supported.

If I add blacklist hostap{,_cs} to /etc/modprobe.d/blacklist, nothing
really changes except the hostap-specific lines in syslog go away, I
still don't get an IP.

Another thing I found in kern.log:

Jun 18 16:44:58 nighthawk kernel: eth1: Tx timeout! ALLOCFID=0123, TXCOMPLFID=0122, EVSTAT=800b

Any idea what else I should try?


thanks,

Michael

-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-686
Locale: LANG=POSIX, LC_CTYPE=de_DE.ISO-8859-15@euro (charmap=locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
ANSI_X3.4-1968)

Versions of packages linux-image-2.6.16-2-686 depends on:
ii  initramfs-tools [linux-initra 0.60       tools for generating an initramfs
ii  module-init-tools             3.2.2-2    tools for managing Linux kernel mo

Versions of packages linux-image-2.6.16-2-686 recommends:
pn  libc6-i686                    <none>     (no description available)

-- debconf-show failed


--- End Message ---
--- Begin Message ---
The 2.6.17 kernel in makes my WLAN work again.  However, still both
orinoco and hostap modules are loaded:

nighthawk~$ sudo lsmod | grep _cs
orinoco_cs             16068  1
orinoco                36180  1 orinoco_cs
hermes                  7360  2 orinoco_cs,orinoco
pcmcia                 34012  1 orinoco_cs
pcmcia_core            37300  4 orinoco_cs,pcmcia,yenta_socket,rsrc_nonstatic


Anyway, closing.

Michael

--- End Message ---

Reply to: