--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.12-1-686: irq11 makes eth0 problems
- From: Philippe BOURCIER <buffalo.phil@free.fr>
- Date: Fri, 05 Aug 2005 14:11:40 +0200
- Message-id: <E1E1137-000127-94@ile.bourcier.hd.free.fr>
Package: linux-image-2.6.12-1-686
Version: 2.6.12-1
Severity: important
hi all,
I reported similar problem with 2.6.11 (see:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=303550 ).
first of all, reportbug complained:
Getting status for linux-image-2.6.12-1-686...
Verifying package integrity...
There may be a problem with your installation of linux-image-2.6.12-1-686;
the following files appear to be missing or changed:
debsums: checksum mismatch linux-image-2.6.12-1-686 file /lib/modules/2.6.12-1-686/modules.pcimap
debsums: checksum mismatch linux-image-2.6.12-1-686 file /lib/modules/2.6.12-1-686/modules.dep
debsums: checksum mismatch linux-image-2.6.12-1-686 file /lib/modules/2.6.12-1-686/modules.ieee1394map
debsums: checksum mismatch linux-image-2.6.12-1-686 file /lib/modules/2.6.12-1-686/modules.usbmap
debsums: checksum mismatch linux-image-2.6.12-1-686 file /lib/modules/2.6.12-1-686/modules.isapnpmap
debsums: checksum mismatch linux-image-2.6.12-1-686 file /lib/modules/2.6.12-1-686/modules.alias
debsums: checksum mismatch linux-image-2.6.12-1-686 file /lib/modules/2.6.12-1-686/modules.symbols
Do you still want to file a report [y|N|q|?]? y
now, the problem:
dmesg:
:07:17 UTC 2005
BIOS-provided physical RAM map:
BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
BIOS-e801: 0000000000100000 - 0000000008000000 (usable)
0MB HIGHMEM available.
128MB LOWMEM available.
On node 0 totalpages: 32768
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 28672 pages, LIFO batch:15
HighMem zone: 0 pages, LIFO batch:1
DMI not present.
Allocating PCI resources starting at 08000000 (gap: 08000000:f8000000)
Built 1 zonelists
Kernel command line: root=/dev/hda2 video=vesafb:ywrap,mtrr vga=791 noapic acpi=off ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01101000)
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 300.805 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 121528k/131072k available (1728k kernel code, 8928k reserved, 721k data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 591.87 BogoMIPS (lpj=295936)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 4820k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xeb080, last bus=0
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00ff020
PnPBIOS: PnP BIOS version 1.0, entry 0xec000:0x3d18, dseg 0xec000
PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
pnp: 00:01: ioport range 0xcf8-0xcff could not be reserved
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x3f0-0x3f1 has been reserved
pnp: 00:01: ioport range 0x3f3-0x3f3 has been reserved
pnp: 00:01: ioport range 0x3f7-0x3f7 has been reserved
pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 8
NET: Registered protocol family 20
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4820KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
VFS: Mounted root (cramfs filesystem) readonly.
input: AT Translated Set 2 keyboard on isa0060/serio0
Freeing unused kernel memory: 180k freed
Capability LSM initialized
vesafb: framebuffer at 0xc0000000, mapped to 0xc8880000, using 3072k, total 4096k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:7648
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Console: switching to colour frame buffer device 128x48
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.11 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: IBM-DBCA-206480, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA CD-ROM XM-1802B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 12685680 sectors (6495 MB) w/420KiB Cache, CHS=13424/15/63, UDMA(33)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 249440k swap on /dev/hda1. Priority:-1 extents:1
EXT3 FS on hda2, internal journal
sb: Init: Starting Probe...
sb: Probing legacy card with io=220, irq=5, dma=3, dma16=5
SB 3.01 detected OK (220)
ESS chip ES1879 detected
sb: Turning on MPU
sb: Init: Done
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: Intel Corporation 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x0000f300
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.3: new low speed USB device using uhci_hcd and address 3
usb 1-1.4: new full speed USB device using uhci_hcd and address 4
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:07.2-1.3
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 0000:00:03.0
Yenta: CardBus bridge found at 0000:00:03.0 [0000:0000]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:03.0, mfunc 0xcba97543, devctl 0x62
Yenta: ISA IRQ mask 0x0698, PCI irq 11
Socket status: 30000010
PCI: Found IRQ 11 for device 0000:00:03.1
Yenta: CardBus bridge found at 0000:00:03.1 [0000:0000]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:03.1, mfunc 0xcba97543, devctl 0x62
Yenta: ISA IRQ mask 0x0698, PCI irq 11
Socket status: 30000010
Real Time Clock Driver v1.12
input: PC Speaker
Floppy drive(s): fd0 is 1.44M
floppy0: Floppy io-port 0x03f2 in use
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
input: PS/2 Logitech TouchPad 3 on isa0060/serio1
irda_init()
NET: Registered protocol family 23
gameport: NS558 PnP Gameport is pnp00:14/gameport0, io 0x201, speed 677kHz
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (1024 buckets, 8192 max) - 248 bytes per conntrack
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
cs: IO port probe 0x100-0x4ff: excluding 0x300-0x307 0x388-0x38f
cs: IO port probe 0x100-0x4ff: excluding 0x300-0x307 0x388-0x38f
cs: IO port probe 0x800-0x8ff: excluding 0x800-0x807
cs: IO port probe 0x800-0x8ff: excluding 0x800-0x807
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
aha152x: resetting bus...
aha152x0: vital data: rev=1, io=0x340 (0x340/0x340), irq=3, scsiid=7, reconnect=enabled, parity=enabled, synchronous=enabled, delay=100, extended translation=disabled
aha152x0: trying software interrupt, ok.
scsi0 : Adaptec 152x SCSI driver; $Revision: 2.7 $
(scsi0:0:0) Synchronous Data Transfer Request period = 200 ns, offset = 8
Vendor: IBM Model: DNES-309170 Rev: SA30
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:1:0) Synchronous Data Transfer Request period = 200 ns, offset = 8
Vendor: IBM Model: DNES-309170 Rev: SA30
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sdb: 17916240 512-byte hdwr sectors (9173 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 17916240 512-byte hdwr sectors (9173 MB)
SCSI device sdb: drive cache: write back
/dev/scsi/host0/bus0/target1/lun0: p1
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
(scsi0:2:0) Synchronous Data Transfer Request period = 200 ns, offset = 8
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.10
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:3:0) Synchronous Data Transfer Request period = 200 ns, offset = 8
Vendor: YAMAHA Model: CRW8424S Rev: 1.0d
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0
Attached scsi generic sg2 at scsi0, channel 0, id 2, lun 0, type 5
Attached scsi generic sg3 at scsi0, channel 0, id 3, lun 0, type 5
sr0: scsi3-mmc drive: 0x/0x caddy
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa00fffff
eth0: 3Com 3c589, io 0x310, irq 9, hw_addr 00:00:86:52:4B:CB
8K FIFO split 5:3 Rx:Tx, auto xcvr
ttyS2 at I/O 0x3e8 (irq = 11) is a 16550A
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03391c0(lo)
IPv6 over IPv4 tunneling driver
eth0: flipped to 10baseT
eth0: no IPv6 routers present
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
irq 11: nobody cared!
[<c01388fa>] __report_bad_irq+0x2a/0xa0
[<c013836d>] handle_IRQ_event+0x3d/0x70
[<c0138a12>] note_interrupt+0x82/0xa0
[<c0138490>] __do_IRQ+0xf0/0x100
[<c0105729>] do_IRQ+0x19/0x30
[<c0103ada>] common_interrupt+0x1a/0x20
[<c011f2ae>] __do_softirq+0x2e/0xa0
[<c011f346>] do_softirq+0x26/0x30
[<c010572e>] do_IRQ+0x1e/0x30
[<c0103ada>] common_interrupt+0x1a/0x20
handlers:
[<c8cddea0>] (usb_hcd_irq+0x0/0x80 [usbcore])
[<c8d00990>] (yenta_interrupt+0x0/0x40 [yenta_socket])
[<c8d00990>] (yenta_interrupt+0x0/0x40 [yenta_socket])
Disabling IRQ #11
eth0: interrupt(s) dropped!
some infos :
lshw:
ile.bourcier.hd.free.fr
description: Computer
width: 32 bits
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 1
size: 128MB
*-cpu
product: Pentium II (Deschutes)
vendor: Intel Corp.
physical id: 2
bus info: cpu@0
version: 6.5.2
size: 300MHz
width: 32 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr
*-cache:0
description: L1 cache
physical id: 0
size: 32KB
*-cache:1
description: L2 cache
physical id: 1
size: 512KB
*-pci
description: Host bridge
product: 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled)
vendor: Intel Corp.
physical id: 0
bus info: pci@00:00.0
version: 02
width: 32 bits
clock: 33MHz
*-display
description: VGA compatible controller
product: ViRGE/MX+MV
vendor: S3 Inc.
physical id: 2
bus info: pci@00:02.0
logical name: /dev/fb0
version: 03
size: 64MB
width: 32 bits
clock: 33MHz
capabilities: vga bus_master cap_list fb
configuration: depth=16 frequency=75.69Hz mode=1024x768 visual=truecolor xres=1024 yres=768
resources: iomemory:c0000000-c3ffffff
*-pcmcia:0
description: CardBus bridge
product: PCI1250
vendor: Texas Instruments
physical id: 3
bus info: pci@00:03.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus
resources: iomemory:8000000-8000fff irq:11
*-pccard UNCLAIMED
description: APA-1460 SCSI Host Adapter
vendor: Adaptec, Inc.
physical id: 0
version: Version 0.01
slot: Socket 0
resources: irq:3
*-pcmcia:1
description: CardBus bridge
product: PCI1250
vendor: Texas Instruments
physical id: 3.1
bus info: pci@00:03.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus
resources: iomemory:8001000-8001fff irq:11
*-pccard UNCLAIMED
description: Megahertz 3CXEM556
product: LAN + 56k Modem
vendor: 3Com
physical id: 0
slot: Socket 1
resources: irq:11 irq:11
*-isa UNCLAIMED
description: ISA bridge
product: 82371AB/EB/MB PIIX4 ISA
vendor: Intel Corp.
physical id: 7
bus info: pci@00:07.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
*-ide
description: IDE interface
product: 82371AB/EB/MB PIIX4 IDE
vendor: Intel Corp.
physical id: 7.1
bus info: pci@00:07.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=PIIX_IDE
resources: ioport:3000-300f
*-ide:0
description: IDE Channel 0
physical id: 0
bus info: ide@0
logical name: ide0
clock: 33MHz
*-disk
description: ATA Disk
product: IBM-DBCA-206480
vendor: IBM
physical id: 0
bus info: ide@0.0
logical name: /dev/hda
version: BC4OA87F
serial: HR0HRN20036
size: 6194MB
capacity: 6194MB
capabilities: ata dma lba iordy smart security pm apm
configuration: apm=off mode=udma2 smart=on
*-ide:1
description: IDE Channel 1
physical id: 1
bus info: ide@1
logical name: ide1
clock: 33MHz
*-cdrom
description: IDE CD-ROM
product: TOSHIBA CD-ROM XM-1802B
vendor: Toshiba
physical id: 0
bus info: ide@1.0
logical name: /dev/hdc
version: 1119
capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy audio
*-usb
description: USB Controller
product: 82371AB/EB/MB PIIX4 USB
vendor: Intel Corp.
physical id: 7.2
bus info: pci@00:07.2
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd
resources: ioport:f300-f31f irq:11
*-usbhost
product: Intel Corporation 82371AB/EB/MB PIIX4 USB
vendor: Linux 2.6.12-1-686 uhci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb
description: USB hub
product: USB2.0 Hub Controller
vendor: NEC Corporation
physical id: 1
bus info: usb@1:1
version: 1.00
capabilities: usb-2.00
configuration: driver=hub maxpower=100mA slots=4 speed=12.0MB/s
*-usb:0
description: Mouse
product: USB-PS/2 Optical Mouse
vendor: Logitech
physical id: 3
bus info: usb@1:1.3
version: 20.00
capabilities: usb-2.00
configuration: driver=usbhid maxpower=98mA speed=1.5MB/s
*-usb:1 UNCLAIMED
description: Generic USB device
product: CanoScan
vendor: Canon
physical id: 4
bus info: usb@1:1.4
version: 1.00
capabilities: usb-1.00
configuration: maxpower=500mA speed=12.0MB/s
*-bridge
description: Bridge
product: 82371AB/EB/MB PIIX4 ACPI
vendor: Intel Corp.
physical id: 7.3
bus info: pci@00:07.3
version: 01
width: 32 bits
clock: 33MHz
capabilities: bridge
configuration: driver=piix4_smbus
resources: irq:9
*-scsi
physical id: 3
logical name: scsi0
capabilities: scsi-host
configuration: driver=aha152x
*-disk:0
description: SCSI Disk
product: DNES-309170
vendor: IBM
physical id: 0.0.0
bus info: scsi@0.0:0.0
logical name: /dev/sda
version: SA30
size: 8748MB
capacity: 8964MB
capabilities: 7200rpm
configuration: ansiversion=3
*-disk:1
description: SCSI Disk
product: DNES-309170
vendor: IBM
physical id: 0.1.0
bus info: scsi@0.0:1.0
logical name: /dev/sdb
version: SA30
size: 8748MB
capacity: 8964MB
capabilities: 7200rpm
configuration: ansiversion=3
*-cdrom:0
description: SCSI CD-ROM
product: CD-ROM PX-40TS
vendor: PLEXTOR
physical id: 0.2.0
bus info: scsi@0.0:2.0
logical name: /dev/cdrom1
logical name: /dev/scd0
logical name: /dev/sr0
version: 1.10
capabilities: removable audio
configuration: ansiversion=2
*-cdrom:1
description: CD-R/CD-RW writer
product: CRW8424S
vendor: YAMAHA
physical id: 0.3.0
bus info: scsi@0.0:3.0
logical name: /dev/cdrom2
logical name: /dev/scd1
logical name: /dev/sr1
version: 1.0d
capabilities: removable audio cd-r cd-rw
configuration: ansiversion=2
*-network
description: Ethernet interface
physical id: 1
logical name: eth0
serial: 00:00:86:52:4b:cb
capabilities: ethernet physical
configuration: broadcast=yes driver=3c589_cs driverversion=1.162-ac ip=192.168.0.2 multicast=yes
lspci -vv:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at <unassigned> (32-bit, prefetchable)
0000:00:02.0 VGA compatible controller: S3 Inc. ViRGE/MX+MV (rev 03) (prog-if 00 [VGA])
Subsystem: S3 Inc. ViRGE/MX+MV
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 0
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at 000c0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:03.0 CardBus bridge: Texas Instruments PCI1250 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 08000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: 08400000-087ff000 (prefetchable)
Memory window 1: 08800000-08bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:00:03.1 CardBus bridge: Texas Instruments PCI1250 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 08001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
Memory window 0: 08c00000-08fff000 (prefetchable)
Memory window 1: 09000000-093ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- PostWrite+
16-bit legacy interface ports at 0001
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at 3000 [size=16]
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 240
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at f300 [size=32]
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
cat /proc/interrupts:
CPU0
0: 316220 XT-PIC timer
1: 283 XT-PIC i8042
2: 0 XT-PIC cascade
3: 353 XT-PIC aha152x
5: 1 XT-PIC soundblaster
7: 4 XT-PIC parport0
8: 1 XT-PIC rtc
9: 5 XT-PIC 1.0
11: 200000 XT-PIC uhci_hcd:usb1, yenta, yenta
12: 100 XT-PIC i8042
14: 7319 XT-PIC ide0
15: 1298 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
hexdump /proc/bus/pci/00/03.0:
0000000 104c ac16 0007 0210 0002 0607 a808 0082
0000010 0000 0800 00a0 0200 0100 b004 0000 0840
0000020 f000 087f 0000 0880 f000 08bf 4000 0000
0000030 40fc 0000 4400 0000 44fc 0000 010b 05c0
0000040 0000 0000 0001 0000 0000 0000 0000 0000
0000050 0000 0000 0000 0000 0000 0000 0000 0000
*
0000080 f061 0844 0080 0000 4149 0901 7543 cba9
0000090 83c0 6162 0000 0000 0000 0000 0000 0000
00000a0 0001 7e21 0000 0080 0000 0000 0000 0000
00000b0 0000 0000 0000 0000 0000 0000 0000 0000
*
0000100
hexdump /proc/bus/pci/00/03.1:
0000000 104c ac16 0007 0210 0002 0607 a808 0082
0000010 1000 0800 00a0 0200 0500 b008 0000 08c0
0000020 f000 08ff 0000 0900 f000 093f 4800 0000
0000030 48fc 0000 4c00 0000 4cfc 0000 020b 0540
0000040 0000 0000 0001 0000 0000 0000 0000 0000
0000050 0000 0000 0000 0000 0000 0000 0000 0000
*
0000080 f061 0844 0080 0000 4149 0901 7543 cba9
0000090 83c0 6162 0000 0000 0000 0000 0000 0000
00000a0 0001 7e21 0000 0080 0000 0000 0000 0000
00000b0 0000 0000 0000 0000 0000 0000 0000 0000
*
0000100
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.4.27-2-686
Locale: LANG=C, LC_CTYPE=fr_FR.UTF-8@euro (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8)
-- no debconf information
--- End Message ---