--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: 2.6.15-6 breaks on Thinkpad R52 (SATA issues?)
- From: paul cannon <pik@debian.org>
- Date: Tue, 14 Feb 2006 14:47:40 -0700
- Message-id: <20060214214146.6815.26678.reportbug@eris>
Package: linux-image-2.6.15-1-686
Version: 2.6.15-6
Severity: important
After upgrading the linux-image-2.6.15-1-686 package from 2.6.15-4 to
2.6.15-6, this IBM/Lenovo Thinkpad R52 (laptop) would no longer boot
that kernel. It failed to find the device to mount for the root
partition.
I am fairly sure that SATA issues have something to do with this, having
fought with them before to get this system working, but I don't know
exactly what they might be. I wish I had more time to debug this, but I
really don't.
More details follow, in case they are useful:
- Only one hard disk, and it's SATA. CD-ROM drive hasn't been working-
I think because ATAPI is still disabled in libata.
- Bootloader is grub. Root fs is ext3.
- After being dropped into the busybox shell on boot failure, I tried
modprobing libata, scsi_mod, and sd_mod to mount the fs manually. No
device node appeared in /dev. I tried mknod-ing /dev/sda and /dev/sda2
manually. Still couldn't mount. I rmmod-ed the scsi modules, rmmod-ed
ata_piix, and reloaded the scsi modules, as I remembered something like
that being necessary sometime in the past. Still no cookie.
- Of course, all this had to happen right after I got comfortable with
2.6.15 and (foolishly) removed an older kernel version, leaving me with
nothing to boot. I had to boot Knoppix, chroot, and downgrade the
package to the 2.6.15-4 version. That made everything happy again.
- dmesg output:
----------------------8<-------------------------
and line: root=/dev/sda2 ro ramdisk_size=100000 lang=us apm=power-off nomce vga=791
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1729.458 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1030824k/1047424k available (1425k kernel code, 15844k reserved, 530k data, 144k init, 129920k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3461.41 BogoMIPS (lpj=1730706)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking if image is initramfs... it is
Freeing initrd memory: 4428k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8d7, last bus=7
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050902
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28)
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: 3000-3fff
MEM window: a8100000-a81fffff
PREFETCH window: c0000000-c7ffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: a8200000-a82fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: 4000-4fff
MEM window: a8300000-a83fffff
PREFETCH window: c8000000-c80fffff
PCI: Bus 5, cardbus bridge: 0000:04:00.0
IO window: 00005000-000050ff
IO window: 00005400-000054ff
PREFETCH window: d0000000-d1ffffff
MEM window: aa000000-abffffff
PCI: Bridge: 0000:00:1e.0
IO window: 5000-8fff
MEM window: a8400000-b7ffffff
PREFETCH window: d0000000-d7ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
audit(1139925215.987:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 65472k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:5b55
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: Mode is VGA compatible
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: Device 00:09 activated.
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 225
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI wakeup devices:
LID SLPB UART EXP0 EXP1 EXP2 EXP3 PCI1 USB0 USB1 USB3 USB7 AC9M
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 144k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (74 C)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001800
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 233, io base 0x00001820
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 50, io base 0x00001840
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 58, io base 0x00001860
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
SCSI subsystem initialized
tg3.c:v3.47 (Dec 28, 2005)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:0a:e4:c1:73:9e
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000]
libata version 1.20 loaded.
ahci 0000:00:1f.2: version 1.2
ahci: probe of 0000:00:1f.2 failed with error -12
ata_piix 0000:00:1f.2: version 1.05
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 58, io mem 0xa8000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18C0 irq 14
ata1: dev 0 cfg 49:0f00 82:746b 83:5be8 84:4003 85:f469 86:1848 87:4003 88:203f
ata1: dev 0 ATA-6, max UDMA/100, 117210240 sectors: LBA
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA Model: IC25N060ATMR04-0 Rev: MO3O
Type: Direct-Access ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18C8 irq 15
ata2: dev 0 cfg 49:0f00 82:4218 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2(0): applying bridge limits
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
ata2(0): WARNING: ATAPI is disabled, device ignored.
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
input: PC Speaker as /class/input/input1
Real Time Clock Driver v1.12
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
hw_random: RNG not detected
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
irda_init()
NET: Registered protocol family 23
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1e.2 to 64
mice: PS/2 mouse device common for all mice
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.7
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8
ipw2200: Copyright(c) 2003-2005 Intel Corporation
intel8x0_measure_ac97_clock: measured 50521 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1e.3 to 64
MC'97 1 converters and GPIO not ready (0xff00)
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Yenta: CardBus bridge found at 0000:04:00.0 [1014:0532]
Yenta: ISA IRQ mask 0x0438, PCI irq 169
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff
cs: IO port probe 0x5000-0x8fff: clean.
pcmcia: parent PCI bridge Memory window: 0xa8400000 - 0xb7ffffff
pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff
ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 66
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x370-0x377 0x3f0-0x3ff 0x4d0-0x4d7
cs: IO port probe 0xa00-0xaff: clean.
Adding 2065776k swap on /dev/sda3. Priority:-1 extents:1 across:2065776k
EXT3 FS on sda2, internal journal
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input3
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
Generic RTC Driver v1.07
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
ibm_acpi: http://ibm-acpi.sf.net/
ibm_acpi: dock device not present
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
NTFS driver 2.1.25 [Flags: R/W MODULE].
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
lp0: using parport0 (interrupt-driven).
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[drm] Initialized radeon 1.19.0 20050911 on minor 0:
mtrr: 0xc0000000,0x8000000 overlaps existing 0xc0000000,0x4000000
[drm] Loading R300 Microcode
----------------------8<-------------------------
- lspci -v output:
----------------------8<-------------------------
0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
Subsystem: IBM: Unknown device 0575
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] #09 [2109]
0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a8100000-a81fffff
Prefetchable memory behind bridge: c0000000-c7ffffff
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [a0] #10 [0141]
0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: a8200000-a82fffff
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
0000:00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: a8300000-a83fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000c8000000
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 0565
Flags: bus master, medium devsel, latency 0, IRQ 169
I/O ports at 1800 [size=32]
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 0565
Flags: bus master, medium devsel, latency 0, IRQ 233
I/O ports at 1820 [size=32]
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 0565
Flags: bus master, medium devsel, latency 0, IRQ 50
I/O ports at 1840 [size=32]
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM: Unknown device 0565
Flags: bus master, medium devsel, latency 0, IRQ 58
I/O ports at 1860 [size=32]
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: IBM: Unknown device 0566
Flags: bus master, medium devsel, latency 0, IRQ 58
Memory at a8000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=07, sec-latency=64
I/O behind bridge: 00005000-00008fff
Memory behind bridge: a8400000-b7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d7f00000
Capabilities: [50] #0d [0000]
0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
Subsystem: IBM: Unknown device 0567
Flags: bus master, medium devsel, latency 0, IRQ 185
I/O ports at 1c00 [size=256]
I/O ports at 1880 [size=64]
Memory at a8000800 (32-bit, non-prefetchable) [size=512]
Memory at a8000400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
0000:00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: IBM: Unknown device 0576
Flags: bus master, medium devsel, latency 0, IRQ 225
I/O ports at 2400 [size=256]
I/O ports at 2000 [size=128]
Capabilities: [50] Power Management version 2
0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
Subsystem: IBM: Unknown device 0568
Flags: bus master, medium devsel, latency 0
0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03) (prog-if 80 [Master])
Subsystem: IBM: Unknown device 056a
Flags: bus master, 66MHz, medium devsel, latency 0
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 18c0 [size=16]
Capabilities: [70] Power Management version 2
0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
Subsystem: IBM: Unknown device 056b
Flags: medium devsel, IRQ 11
I/O ports at 18e0 [size=32]
0000:01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Radeon Mobility M300] (prog-if 00 [VGA])
Subsystem: IBM: Unknown device 056e
Flags: bus master, fast devsel, latency 0, IRQ 169
Memory at c0000000 (32-bit, prefetchable) [size=128M]
I/O ports at 3000 [size=256]
Memory at a8100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at a8120000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #10 [0001]
Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
Subsystem: IBM: Unknown device 0577
Flags: bus master, fast devsel, latency 0, IRQ 169
Memory at a8200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
Capabilities: [d0] #10 [0001]
0000:04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
Subsystem: IBM: Unknown device 0532
Flags: bus master, medium devsel, latency 168, IRQ 169
Memory at a8400000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=04, secondary=05, subordinate=08, sec-latency=176
Memory window 0: d0000000-d1fff000 (prefetchable)
Memory window 1: aa000000-abfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
16-bit legacy interface ports at 0001
0000:04:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
Subsystem: Intel Corporation: Unknown device 2711
Flags: bus master, medium devsel, latency 64, IRQ 66
Memory at a8401000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
----------------------8<-------------------------
- output of lsmod (under the working 2.6.15-4):
----------------------8<-------------------------
Module Size Used by
radeon 96960 1
drm 64532 2 radeon
binfmt_misc 10600 1
lp 10532 0
cpufreq_powersave 1632 1
speedstep_centrino 7060 1
freq_table 4164 1 speedstep_centrino
ipv6 221664 18
autofs4 16804 0
ntfs 187984 0
video 16004 0
ibm_acpi 25856 0
container 4352 0
button 6448 0
battery 9412 0
ac 4676 0
sbp2 20996 0
ohci1394 30164 0
ieee1394 88152 2 sbp2,ohci1394
usb_storage 64864 0
ohci_hcd 17764 0
dm_mod 51160 0
pcmcia 35708 0
ipw2200 96236 0
joydev 8864 0
psmouse 32356 0
ieee80211 29064 1 ipw2200
ieee80211_crypt 5344 1 ieee80211
evdev 8800 0
serio_raw 6468 0
firmware_class 9696 2 pcmcia,ipw2200
yenta_socket 24972 1
rsrc_nonstatic 11968 1 yenta_socket
pcmcia_core 37872 3 pcmcia,yenta_socket,rsrc_nonstatic
mousedev 10496 1
irtty_sir 7584 0
snd_intel8x0m 15788 0
snd_pcm_oss 45536 0
snd_mixer_oss 16448 1 snd_pcm_oss
snd_intel8x0 29596 2
i2c_i801 7916 0
sir_dev 16972 1 irtty_sir
snd_ac97_codec 82464 2 snd_intel8x0m,snd_intel8x0
snd_ac97_bus 2048 1 snd_ac97_codec
irda 162300 2 irtty_sir,sir_dev
intel_agp 20796 1
agpgart 31400 2 drm,intel_agp
i2c_core 19280 1 i2c_i801
floppy 54628 0
rtc 11316 0
snd_pcm 77576 5 snd_intel8x0m,snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 21316 1 snd_pcm
snd 48420 10 snd_intel8x0m,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 8928 1 snd
snd_page_alloc 9928 3 snd_intel8x0m,snd_intel8x0,snd_pcm
pcspkr 1668 0
parport_pc 32036 1
parport 31624 2 lp,parport_pc
crc_ccitt 1952 1 irda
ext3 117768 1
mbcache 8484 1 ext3
ide_generic 1120 0 [permanent]
sd_mod 17072 3
ata_piix 8964 2
ahci 11844 0
libata 51020 2 ata_piix,ahci
scsi_mod 125768 5 sbp2,usb_storage,sd_mod,ahci,libata
ehci_hcd 28904 0
tg3 89540 0
generic 4260 0 [permanent]
ide_core 112800 3 usb_storage,ide_generic,generic
uhci_hcd 28016 0
usbcore 113284 5 usb_storage,ohci_hcd,ehci_hcd,uhci_hcd
thermal 13416 0
processor 22912 2 speedstep_centrino,thermal
fan 4580 0
jbd 48404 1 ext3
----------------------8<-------------------------
- What else might help?
--
paul
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15-1-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages linux-image-2.6.15-1-686 depends on:
ii initramfs-tools [linux-initra 0.51 tools for generating an initramfs
ii module-init-tools 3.2.2-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.15-1-686 recommends:
ii libc6-i686 2.3.5-13 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.15-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.15-1-686/preinst/overwriting-modules-2.6.15-1-686: true
linux-image-2.6.15-1-686/postinst/depmod-error-initrd-2.6.15-1-686: false
linux-image-2.6.15-1-686/postinst/bootloader-error-2.6.15-1-686:
linux-image-2.6.15-1-686/postinst/bootloader-test-error-2.6.15-1-686:
linux-image-2.6.15-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.15-1-686/preinst/failed-to-move-modules-2.6.15-1-686:
linux-image-2.6.15-1-686/postinst/old-system-map-link-2.6.15-1-686: true
linux-image-2.6.15-1-686/preinst/abort-install-2.6.15-1-686:
linux-image-2.6.15-1-686/preinst/abort-overwrite-2.6.15-1-686:
linux-image-2.6.15-1-686/preinst/bootloader-initrd-2.6.15-1-686: true
linux-image-2.6.15-1-686/prerm/would-invalidate-boot-loader-2.6.15-1-686: true
* linux-image-2.6.15-1-686/preinst/lilo-initrd-2.6.15-1-686: false
linux-image-2.6.15-1-686/postinst/old-initrd-link-2.6.15-1-686: true
linux-image-2.6.15-1-686/postinst/old-dir-initrd-link-2.6.15-1-686: true
* linux-image-2.6.15-1-686/preinst/already-running-this-2.6.15-1-686:
linux-image-2.6.15-1-686/preinst/initrd-2.6.15-1-686:
linux-image-2.6.15-1-686/postinst/depmod-error-2.6.15-1-686: false
linux-image-2.6.15-1-686/postinst/create-kimage-link-2.6.15-1-686: true
linux-image-2.6.15-1-686/prerm/removing-running-kernel-2.6.15-1-686: true
linux-image-2.6.15-1-686/preinst/elilo-initrd-2.6.15-1-686: true
--- End Message ---