Bug#321409: hda: dma_timer_expiry: dma status == 0x21
Markus Raab wrote:
> I have openend the bug again.
Thanks.
> If you are sure the Bug is IDE-Kernel related please use the latest unstable
> kernel (best wait for 2.6.15).
>
> Then give us more information, in detail give:
> lscpi
> lspci -n
> dmesg
> lsmod
>
> And maybe interrupts. The hda: dma messages unfortunately don't help, because
> they are just hardware-error messages passed through the ide subsystem.
OK, I've attached the requested information. I still have 2.6.14-2,
though, I can resubmit when .15 arrives.
Best regards,
Henrik
Linux version 2.6.14-2-686-smp (Debian 2.6.14-7) (maks@sternwelten.at) (gcc version 4.0.3 20051201 (prerelease) (Debian 4.0.2-5)) #1 SMP Wed Dec 28 18:47:53 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000004feaa000 (usable)
BIOS-e820: 000000004feaa000 - 0000000050000000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
382MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 327338
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 97962 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 DELL ) @ 0x000fdf00
ACPI: RSDT (v001 DELL CPi R 0x27d4070e ASL 0x00000061) @ 0x4fef0000
ACPI: FADT (v001 DELL CPi R 0x27d4070e ASL 0x00000061) @ 0x4fef0400
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 60000000 (gap: 50000000:aec10000)
Built 1 zonelists
Kernel command line: root=/dev/hda3 ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01a42000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1399.266 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1292776k/1309352k available (1960k kernel code, 15416k reserved, 541k data, 212k init, 391848k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2799.09 BogoMIPS (lpj=1399548)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0800)
CPU0: Intel(R) Pentium(R) M processor 1400MHz stepping 05
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
checking if image is initramfs... it is
softlockup thread 0 started up.
Freeing initrd memory: 1068k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:00:02.0
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x800-0x805 could not be reserved
pnp: 00:01: ioport range 0x808-0x80f could not be reserved
pnp: 00:02: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:02: ioport range 0x806-0x807 has been reserved
pnp: 00:02: ioport range 0x810-0x85f could not be reserved
pnp: 00:02: ioport range 0x860-0x87f has been reserved
pnp: 00:02: ioport range 0x880-0x8bf has been reserved
pnp: 00:02: ioport range 0x8c0-0x8df has been reserved
pnp: 00:07: ioport range 0x900-0x97f has been reserved
pnp: 00:0c: ioport range 0x7b0-0x7bb has been reserved
pnp: 00:0c: ioport range 0x7c0-0x7df has been reserved
pnp: 00:0c: ioport range 0xbb0-0xbbb has been reserved
pnp: 00:0c: ioport range 0xbc0-0xbdf has been reserved
pnp: 00:0c: ioport range 0xfb0-0xfbb has been reserved
pnp: 00:0c: ioport range 0xfc0-0xfdf has been reserved
pnp: 00:0c: ioport range 0x13b0-0x13bb has been reserved
pnp: 00:0c: ioport range 0x13c0-0x13df has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 2, cardbus bridge: 0000:01:01.0
IO window: 0000e000-0000e0ff
IO window: 0000e400-0000e4ff
PREFETCH window: 60000000-61ffffff
MEM window: 64000000-65ffffff
PCI: Bridge: 0000:00:1e.0
IO window: e000-efff
MEM window: fc000000-fdffffff
PREFETCH window: 60000000-61ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:01:01.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
audit: initializing netlink socket (disabled)
audit(1136278014.878:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard on isa0060/serio0
Freeing unused kernel memory: 212k freed
mice: PS/2 mouse device common for all mice
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: IC25N030ATMR04-0, ATA DISK drive
input: PS/2 Mouse on isa0060/serio1
input: AlpsPS/2 ALPS GlidePoint on isa0060/serio1
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: max request size: 1024KiB
hda: 58605120 sectors (30005 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 498000k swap on /dev/hda4. Priority:-1 extents:1 across:498000k
EXT3 FS on hda3, internal journal
i8k: unable to get SMM BIOS version
Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xfaeffc00
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50473 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:01:01.0 [1028:0153]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000007
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
cs: IO port probe 0xe000-0xefff: clean.
pcmcia: parent PCI bridge Memory window: 0xfc000000 - 0xfdffffff
pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x61ffffff
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0xfcffd000, irq 11, MAC addr 00:0D:56:DE:06:9F
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Detected 892K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
hw_random: cannot enable RNG, aborting
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1f.6 to 64
Real Time Clock Driver v1.12
input: PC Speaker
ts: Compaq touchscreen protocol output
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x300-0x307 0x370-0x377
cs: IO port probe 0x800-0x8ff: excluding 0x8e0-0x8e7
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [AC] (on-line)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
ACPI: Sleep Button (CM) [SBTN]
ACPI: Thermal Zone [THM] (33 C)
lp: driver loaded but no devices found
irda_init()
NET: Registered protocol family 23
NET: Registered protocol family 10
Disabled Privacy Extensions on device c033d9e0(lo)
IPv6 over IPv4 tunneling driver
ndiswrapper version 1.7 loaded (preempt=no,smp=yes)
ndiswrapper: driver bcmwl5 (Broadcom,06/13/2003, 3.20.23.0) loaded
ACPI: PCI Interrupt 0000:01:03.0[A] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
ndiswrapper: using irq 7
wlan0: vendor: ''
wlan0: ndiswrapper ethernet device 00:90:4b:65:1c:e2 using driver bcmwl5, 14E4:4320.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
wlan0: no IPv6 routers present
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized i915 1.1.0 20040405 on minor 0:
[drm] Initialized i915 1.1.0 20040405 on minor 1:
mtrr: base(0xf0020000) is not aligned on a size(0x41a000) boundary
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
CPU0
0: 11740098 XT-PIC timer
1: 26077 XT-PIC i8042
2: 0 XT-PIC cascade
7: 633694 XT-PIC Intel 82801DB-ICH4, Intel 82801DB-ICH4 Modem, ndiswrapper
8: 1 XT-PIC rtc
9: 7 XT-PIC acpi
11: 30 XT-PIC ehci_hcd:usb1, yenta, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, i915@pci:0000:00:02.0
12: 346456 XT-PIC i8042
14: 56526 XT-PIC ide0
NMI: 0
LOC: 0
ERR: 0
MIS: 0
Module Size Used by
nfs 238952 0
lockd 67208 1 nfs
nfs_acl 3968 1 nfs
sunrpc 153052 3 nfs,lockd,nfs_acl
i915 20800 2
drm 76404 3 i915
ndiswrapper 185684 0
binfmt_misc 12936 1
ipv6 280032 13
irtty_sir 9216 0
sir_dev 20220 1 irtty_sir
irda 210364 2 irtty_sir,sir_dev
crc_ccitt 2208 1 irda
parport_pc 37924 0
lp 12164 0
parport 38696 2 parport_pc,lp
thermal 13672 0
fan 4804 0
button 6672 0
processor 23656 1 thermal
ac 4900 0
battery 9636 0
pcmcia 41532 2
firmware_class 10816 1 pcmcia
joydev 10144 0
tsdev 7744 0
pcspkr 3876 0
rtc 13976 0
snd_intel8x0m 19332 0
pci_hotplug 29564 0
hci_usb 16848 0
bluetooth 52900 1 hci_usb
uhci_hcd 34992 0
intel_agp 24412 1
agpgart 36364 3 drm,intel_agp
e100 38272 0
mii 5792 1 e100
yenta_socket 28556 2
rsrc_nonstatic 14464 1 yenta_socket
pcmcia_core 44244 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_intel8x0 36128 5
snd_ac97_codec 99228 2 snd_intel8x0m,snd_intel8x0
snd_ac97_bus 2368 1 snd_ac97_codec
snd_pcm_oss 56192 0
snd_mixer_oss 20160 1 snd_pcm_oss
snd_pcm 96452 5 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 26532 2 snd_pcm
snd 58884 15 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10400 1 snd
snd_page_alloc 11208 3 snd_intel8x0m,snd_intel8x0,snd_pcm
ehci_hcd 37256 0
usbcore 131136 5 ndiswrapper,hci_usb,uhci_hcd,ehci_hcd
ide_cd 44196 0
cdrom 41376 1 ide_cd
i8k 7128 0
ext3 146824 1
jbd 62292 1 ext3
mbcache 10244 1 ext3
ide_disk 19264 3
ide_generic 1344 0 [permanent]
generic 4580 0 [permanent]
piix 11012 0 [permanent]
ide_core 134736 5 ide_cd,ide_disk,ide_generic,generic,piix
evdev 9824 1
mousedev 12132 0
psmouse 40196 0
0000:00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
0000:00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
0000:00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
0000:00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
0000:01:01.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller
0000:01:03.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 02)
0000:01:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 81)
0000:00:00.0 0600: 8086:3580 (rev 02)
0000:00:00.1 0880: 8086:3584 (rev 02)
0000:00:00.3 0880: 8086:3585 (rev 02)
0000:00:02.0 0300: 8086:3582 (rev 02)
0000:00:02.1 0380: 8086:3582 (rev 02)
0000:00:1d.0 0c03: 8086:24c2 (rev 01)
0000:00:1d.1 0c03: 8086:24c4 (rev 01)
0000:00:1d.2 0c03: 8086:24c7 (rev 01)
0000:00:1d.7 0c03: 8086:24cd (rev 01)
0000:00:1e.0 0604: 8086:2448 (rev 81)
0000:00:1f.0 0601: 8086:24cc (rev 01)
0000:00:1f.1 0101: 8086:24ca (rev 01)
0000:00:1f.5 0401: 8086:24c5 (rev 01)
0000:00:1f.6 0703: 8086:24c6 (rev 01)
0000:01:01.0 0607: 1217:6972
0000:01:03.0 0280: 14e4:4320 (rev 02)
0000:01:08.0 0200: 8086:103d (rev 81)
Linux henrik 2.6.14-2-686-smp #1 SMP Wed Dec 28 18:47:53 UTC 2005 i686 GNU/Linux
Reply to: