Bug#294652: ok with kernel2.6.10
it s seems to be in order with the kernel 2.6.10
the fan start well :-)
but there are some strange errors :
pciehp: acpi_pciehprm:\_SB_.C03A evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.C03A evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
hw_random hardware driver 1.0.0 loaded
pciehp: acpi_pciehprm:\_SB_.C03A evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.C03A evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
Vincent
Linux version 2.6.10-1-686 (dilinger@toaster.hq.voxel.net) (gcc version 3.3.5 (Debian 1:3.3.5-6)) #1 Tue Jan 18 04:34:19 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
BIOS-e820: 000000001ffd0000 - 000000001fff0c00 (reserved)
BIOS-e820: 000000001fff0c00 - 000000001fffc000 (ACPI NVS)
BIOS-e820: 000000001fffc000 - 0000000020000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131024
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126928 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 COMPAQ ) @ 0x000f6990
ACPI: RSDT (v001 COMPAQ CPQ00B7 0x12080220 CPQ 0x00000001) @ 0x1fff0c84
ACPI: FADT (v002 COMPAQ CPQ00B7 0x00000002 CPQ 0x00000001) @ 0x1fff0c00
ACPI: SSDT (v001 COMPAQ CPQGysr 0x00001001 MSFT 0x0100000e) @ 0x1fff699f
ACPI: DSDT (v001 COMPAQ EVON610C 0x00010000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Built 1 zonelists
Kernel command line: root=/dev/hda2 ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01405000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1196.240 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 511108k/524096k available (1682k kernel code, 12416k reserved, 704k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2359.29 BogoMIPS (lpj=1179648)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000
CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00000400 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c00)
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 4704k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf03a2, last bus=4
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [C03A] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.C03A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C03A.C03B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C03A.C04D._PRT]
ACPI: Power Resource [C148] (on)
ACPI: Power Resource [C15C] (on)
ACPI: Power Resource [C160] (on)
ACPI: Power Resource [C163] (on)
ACPI: Power Resource [C16C] (on)
ACPI: PCI Interrupt Link [C0B5] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0B6] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0B7] (IRQs 5 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C0B8] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0B9] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [C0BA] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [C0BB] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [C0BC] (IRQs) *0, disabled.
ACPI: Power Resource [C1D7] (off)
ACPI: Power Resource [C1D8] (off)
ACPI: Power Resource [C1D9] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: 00:0c: ioport range 0x140-0x14f has been reserved
pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0d: ioport range 0x1000-0x107f could not be reserved
pnp: 00:0d: ioport range 0x1100-0x113f has been reserved
pnp: 00:0d: ioport range 0x1200-0x121f has been reserved
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI wakeup devices:
C04D C09F C0A5 C0A8 C184 C185 C187 C188
ACPI: (supports S0 S3 S4 S4bios S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4704KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 172k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [C0B7] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x4440-0x4447, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x4448-0x444f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HTS548040M9AT00, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 78140160 sectors (40007 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 >
Probing IDE interface ide1...
hdc: Compaq CRN-8245B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide2: I/O resource 0x3EE-0x3EE not free.
ide2: ports already in use, skipping probe
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
Adding 1028120k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda2, internal journal
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
Capability LSM initialized
Linux agpgart interface v0.100 (c) Dave Jones
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI Interrupt Link [C0B8] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:06.0 [0e11:00b7]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x01001002, devctl 0x64
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
ACPI: PCI interrupt 0000:02:06.1[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:06.1 [0e11:00b7]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.1, mfunc 0x01001002, devctl 0x64
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000010
e100: Intel(R) PRO/100 Network Driver, 3.2.3-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI Interrupt Link [C0B9] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 10 (level, low) -> IRQ 10
e100: eth0: e100_probe: addr 0x40100000, irq 10, MAC addr 00:02:A5:C0:03:FA
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:02:0e.0: NEC Corporation USB
ohci_hcd 0000:02:0e.0: irq 10, pci mem 0x40180000
ohci_hcd 0000:02:0e.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:02:0e.1[B] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:02:0e.1: NEC Corporation USB (#2)
ohci_hcd 0000:02:0e.1: irq 10, pci mem 0x40200000
ohci_hcd 0000:02:0e.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:02:0e.2[C] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:02:0e.2: NEC Corporation USB 2.0
ehci_hcd 0000:02:0e.2: irq 10, pci mem 0x40300000
ehci_hcd 0000:02:0e.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:02:0e.2: USB 2.0 initialized, EHCI 0.95, driver 26 Oct 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
inserting floppy driver for 2.6.10-1-686
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
irda_init()
NET: Registered protocol family 23
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
input: PC Speaker
Real Time Clock Driver v1.12
synaptics reset failed
synaptics reset failed
synaptics reset failed
Unable to query Synaptics hardware.
input: PS/2 Synaptics TouchPad on isa0060/serio4
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
agpgart: Detected an Intel i845 Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 256M @ 0x60000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.C03A evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.C03A evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
hw_random hardware driver 1.0.0 loaded
pciehp: acpi_pciehprm:\_SB_.C03A evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.C03A evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ACPI: PCI Interrupt Link [C0B6] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49081 usecs
intel8x0: clocking to 48000
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
ACPI: Battery Slot [C184] (battery present)
ACPI: Battery Slot [C185] (battery absent)
ACPI: AC Adapter [C186] (off-line)
ACPI: Processor [C000] (supports C1 C2 C3)
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C187]
ACPI: Lid Switch [C188]
ACPI: Fan [C1DA] (off)
ACPI: Fan [C1DB] (off)
ACPI: Fan [C1DC] (off)
ACPI: Thermal Zone [TZ1] (67 C)
ACPI: Thermal Zone [C1D6] (45 C)
lp0: using parport0 (interrupt-driven).
hdc: drive_cmd: status=0x01 { Error }
hdc: drive_cmd: error=0x04Aborted Command
cs: IO port probe 0x0100-0x04ff: excluding 0x100-0x107
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
airo: Probing for PCI adapters
airo: Finished probing for PCI adapters
NET: Registered protocol family 10
Disabled Privacy Extensions on device c032abe0(lo)
IPv6 over IPv4 tunneling driver
airo: cmd= 111
airo: status= 7f11
airo: Rsp0= 2
airo: Rsp1= 0
airo: Rsp2= 0
airo: Doing fast bap_reads
airo: MAC enabled eth1 0:b:fd:5d:fd:5f
eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io 0x0180-0x01bf
Setting key 0
NET: Registered protocol family 17
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.6
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
ACPI: PCI Interrupt Link [C0B5] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
eth1: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
Reply to: