Bug#344791: Problem with pcmcia fixed disk
Package: linux-image-2.6.14-2-686
Version: 2.6.14-6
When I insert a pcmcia fixed ide disk, I get the following messages in
/var/log/syslog. I have also compiled a 2.6.14.3 and get the same
problem. All is working well with 2.6.12 debian kernel, and
2.4.17 recompiled.
The pcmcia system was tested with different combination of pcmcia-cs,
pcmciautils, hotplug, udev giving the same phenomena.
The pcmcia system is working for a wifi card.
Dec 25 22:40:06 localhost kernel: hdc: probing with STATUS(0x50) instead of ALTSTATUS(0xaa)
Dec 25 22:40:06 localhost kernel: hdc: IBM-DJSA-220, ATA DISK drive
Dec 25 22:40:06 localhost kernel: hdd: probing with STATUS(0x50) instead of ALTSTATUS(0xaa)
Dec 25 22:40:07 localhost kernel: hdd: probing with STATUS(0x51) instead of ALTSTATUS(0xaa)
Dec 25 22:40:07 localhost kernel: ide1 at 0xa1f0-0xa1f7,0xa3f6 on irq 3
Dec 25 22:40:07 localhost kernel: hdc: max request size: 128KiB
Dec 25 22:40:37 localhost kernel: hdc: irq timeout: status=0x50 { DriveReady SeekComplete }
Dec 25 22:40:37 localhost kernel: ide: failed opcode was: 0xf8
Dec 25 22:40:37 localhost kernel: hdc: Host Protected Area detected.
Dec 25 22:40:37 localhost kernel: ^Icurrent capacity is 39070080 sectors (20003
MB)
Dec 25 22:40:37 localhost kernel: ^Inative capacity is 138411840 sectors (70866 MB)
Dec 25 22:41:07 localhost kernel: hdc: irq timeout: status=0x50 { DriveReady SeekComplete }
Dec 25 22:41:07 localhost kernel: ide: failed opcode was: 0xf9 25 22:41:07 localhost kernel: hdc: Host Protected Area disabled.
Dec 25 22:41:07 localhost kernel: hdc: 134217729 sectors (68719 MB) w/1874KiB Cache, CHS=65535/16/63
Dec 25 22:41:07 localhost kernel: hdc: cache flushes not supported
Dec 25 22:41:17 localhost kernel: hdc:hdc: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
Dec 25 22:41:17 localhost kernel: ide: failed opcode was: unknown
Dec 25 22:41:17 localhost kernel: hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
.....
Dec 25 22:41:17 localhost kernel: ide: failed opcode was: unknown
Dec 25 22:41:17 localhost kernel: hdc: drive not ready for command
Dec 25 22:41:17 localhost kernel: ide1: reset: master: error (0x00?)
Dec 25 22:41:17 localhost kernel: end_request: I/O error, dev hdc,
sector 0
Dec 25 22:41:17 localhost kernel: Buffer I/O error on device hdc,
logical block
0
Dec 25 22:41:17 localhost kernel: end_request: I/O error, dev hdc,
sector 1
Dec 25 22:41:17 localhost kernel: Buffer I/O error on device hdc,
logical block
1
Dec 25 22:41:17 localhost kernel: end_request: I/O error, dev hdc,
sector 2
Dec 25 22:41:17 localhost kernel: Buffer I/O error on device hdc,
logical block
2
.....
Dec 25 22:41:17 localhost kernel: unable to read partition table
Dec 25 22:41:17 localhost kernel: ide-cs: hdc: Vcc = 5.0, Vpp = 12.0
I'm using a debian testing and libc6 2.3.5-8
Thanks.
Reply to: