Bug#341378: kernel 2.6.12 and 2.6.14 crash on boot loading usb drivers on a sis chipset

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: Bug#341378: kernel 2.6.12 and 2.6.14 crash on boot loading usb drivers on a sis chipset
From: giorgiove <studiolazzarini@email.it>
Date: Wed, 30 Nov 2005 11:05:26 +0100
Message-id: <FBCMFE02B01rSosrwlM00007e28@fbcmfe02b01.fbc.local>
Reply-to: giorgiove <studiolazzarini@email.it>, 341378@bugs.debian.org
Package: kernel
Severity: critical
Justification: breaks the whole system



-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.14-2-686
Locale: LANG=it_IT@euro, LC_CTYPE=it_IT@euro (charmap=ISO-8859-15)
 With new udev (I reported to udev maintainer but it says it's a kernel problem) the kernel doesn't' boot anymore making a mess of usb tree as described in the log file I attached below. the only way is to deinnstall udev and use old hotplug


Nov 30 10:51:26 localhost kernel: VFS: Mounted root (cramfs filesystem) readonly.
Nov 30 10:51:26 localhost kernel: Freeing unused kernel memory: 180k freed
Nov 30 10:51:26 localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Nov 30 10:51:26 localhost kernel: Capability LSM initialized
Nov 30 10:51:26 localhost kernel: NET: Registered protocol family 1
Nov 30 10:51:26 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 30 10:51:26 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 30 10:51:26 localhost kernel: SIS5513: IDE controller at PCI slot 0000:00:02.5
Nov 30 10:51:26 localhost kernel: PCI: Found IRQ 11 for device 0000:00:02.5
Nov 30 10:51:26 localhost kernel: SIS5513: chipset revision 0
Nov 30 10:51:26 localhost kernel: SIS5513: not 100%% native mode: will probe irqs later
Nov 30 10:51:26 localhost kernel: SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
Nov 30 10:51:26 localhost kernel:     ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:pio
Nov 30 10:51:26 localhost kernel:     ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:DMA, hdd:pio
Nov 30 10:51:26 localhost kernel: Probing IDE interface ide0...
Nov 30 10:51:26 localhost kernel: hda: Maxtor 6Y080L0, ATA DISK drive
Nov 30 10:51:26 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 30 10:51:26 localhost kernel: Probing IDE interface ide1...
Nov 30 10:51:26 localhost kernel: hdc: CD-224E, ATAPI CD/DVD-ROM drive
Nov 30 10:51:26 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 30 10:51:26 localhost kernel: Probing IDE interface ide2...
Nov 30 10:51:26 localhost kernel: Probing IDE interface ide3...
Nov 30 10:51:26 localhost kernel: Probing IDE interface ide4...
Nov 30 10:51:26 localhost kernel: Probing IDE interface ide5...
Nov 30 10:51:26 localhost kernel: hda: max request size: 128KiB
Nov 30 10:51:26 localhost kernel: hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
Nov 30 10:51:26 localhost kernel: hda: cache flushes supported
Nov 30 10:51:26 localhost kernel:  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 > p4
Nov 30 10:51:26 localhost kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Nov 30 10:51:26 localhost kernel: EXT3-fs: write access will be enabled during recovery.
Nov 30 10:51:26 localhost kernel: kjournald starting.  Commit interval 5 seconds
Nov 30 10:51:26 localhost kernel: EXT3-fs: recovery complete.
Nov 30 10:51:26 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 30 10:51:26 localhost kernel: hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Nov 30 10:51:26 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Nov 30 10:51:26 localhost kernel: input: PC Speaker
Nov 30 10:51:26 localhost kernel: Real Time Clock Driver v1.12
Nov 30 10:51:26 localhost kernel: parport: PnPBIOS parport detected.
Nov 30 10:51:26 localhost kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
Nov 30 10:51:26 localhost kernel: Floppy drive(s): fd0 is 1.44M
Nov 30 10:51:26 localhost kernel: mice: PS/2 mouse device common for all mice
Nov 30 10:51:26 localhost kernel: FDC 0 is a post-1991 82077
Nov 30 10:51:26 localhost kernel: Linux agpgart interface v0.101 (c) Dave Jones
Nov 30 10:51:26 localhost kernel: agpgart: Detected SiS 650 chipset
Nov 30 10:51:26 localhost kernel: agpgart: AGP aperture is 64M @ 0xe8000000
Nov 30 10:51:26 localhost kernel: usbcore: registered new driver usbfs
Nov 30 10:51:26 localhost kernel: usbcore: registered new driver hub
Nov 30 10:51:26 localhost kernel: i2c-sis96x version 1.0.0
Nov 30 10:51:26 localhost kernel: sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
Nov 30 10:51:26 localhost kernel: PCI: setting IRQ 11 as level-triggered
Nov 30 10:51:26 localhost kernel: PCI: Assigned IRQ 11 for device 0000:00:03.3
Nov 30 10:51:26 localhost kernel: ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
Nov 30 10:51:26 localhost kernel: ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
Nov 30 10:51:26 localhost kernel: ehci_hcd 0000:00:03.3: irq 11, io mem 0xec004000
Nov 30 10:51:26 localhost kernel: PCI: cache line size of 128 is not supported by device 0000:00:03.3
Nov 30 10:51:27 localhost kernel: ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Nov 30 10:51:27 localhost kernel: hub 1-0:1.0: USB hub found
Nov 30 10:51:27 localhost kernel: hub 1-0:1.0: 6 ports detected
Nov 30 10:51:27 localhost kernel: PCI: Found IRQ 5 for device 0000:00:02.7
Nov 30 10:51:27 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:02.6
Nov 30 10:51:27 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:0b.0
Nov 30 10:51:27 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:0c.0
Nov 30 10:51:27 localhost kernel: ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Nov 30 10:51:27 localhost kernel: ieee1394: Initialized config rom entry `ip1394'
Nov 30 10:51:27 localhost kernel: 8139too Fast Ethernet driver 0.9.27
Nov 30 10:51:27 localhost kernel: Linux Kernel Card Services
Nov 30 10:51:27 localhost kernel:   options:  [pci] [cardbus] [pm]
Nov 30 10:51:27 localhost kernel: intel8x0_measure_ac97_clock: measured 49326 usecs
Nov 30 10:51:27 localhost kernel: intel8x0: clocking to 48000
Nov 30 10:51:27 localhost kernel: PCI: Found IRQ 4 for device 0000:00:03.0
Nov 30 10:51:27 localhost kernel: ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
Nov 30 10:51:27 localhost kernel: ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
Nov 30 10:51:27 localhost kernel: ohci_hcd 0000:00:03.0: irq 11, io mem 0xec001000
Nov 30 10:51:27 localhost kernel: hub 2-0:1.0: USB hub found
Nov 30 10:51:27 localhost kernel: hub 2-0:1.0: 2 ports detected
Nov 30 10:51:27 localhost kernel: PCI: Found IRQ 13 for device 0000:00:03.1
Nov 30 10:51:27 localhost kernel: ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
Nov 30 10:51:27 localhost kernel: ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
Nov 30 10:51:27 localhost kernel: ohci_hcd 0000:00:03.1: irq 3, io mem 0xec002000
Nov 30 10:51:27 localhost kernel: hub 3-0:1.0: USB hub found
Nov 30 10:51:27 localhost kernel: hub 3-0:1.0: 2 ports detected
Nov 30 10:51:27 localhost kernel: PCI: setting IRQ 9 as level-triggered
Nov 30 10:51:27 localhost kernel: PCI: Assigned IRQ 9 for device 0000:00:03.2
Nov 30 10:51:27 localhost kernel: ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
Nov 30 10:51:27 localhost kernel: ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
Nov 30 10:51:27 localhost kernel: ohci_hcd 0000:00:03.2: irq 9, io mem 0xec003000
Nov 30 10:51:27 localhost kernel: hub 4-0:1.0: USB hub found
Nov 30 10:51:27 localhost kernel: hub 4-0:1.0: 2 ports detected
Nov 30 10:51:27 localhost kernel: PCI: Found IRQ 5 for device 0000:00:02.6
Nov 30 10:51:27 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:02.7
Nov 30 10:51:27 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:0b.0
Nov 30 10:51:27 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:0c.0
Nov 30 10:51:27 localhost kernel: ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
Nov 30 10:51:27 localhost kernel: PCI: Found IRQ 3 for device 0000:00:02.3
Nov 30 10:51:27 localhost kernel: PCI: Sharing IRQ 3 with 0000:00:02.1
Nov 30 10:51:27 localhost kernel: ohci1394: fw-host0: Unexpected PCI resource length of 1000!
Nov 30 10:51:27 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[3]  MMIO=[ec000000-ec0007ff]  Max Packet=[2048]
Nov 30 10:51:27 localhost kernel: PCI: Found IRQ 5 for device 0000:00:0b.0
Nov 30 10:51:27 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:02.6
Nov 30 10:51:27 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:02.7
Nov 30 10:51:27 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:0c.0
Nov 30 10:51:27 localhost kernel: eth0: RealTek RTL8139 at 0x8c00, 00:90:f5:05:be:9f, IRQ 5
Nov 30 10:51:27 localhost kernel: eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Nov 30 10:51:27 localhost kernel: PCI: Enabling device 0000:00:0c.0 (0000 -> 0002)
Nov 30 10:51:27 localhost kernel: PCI: Found IRQ 5 for device 0000:00:0c.0
Nov 30 10:51:27 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:02.6
Nov 30 10:51:27 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:02.7
Nov 30 10:51:27 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:0b.0
Nov 30 10:51:27 localhost kernel: Yenta: CardBus bridge found at 0000:00:0c.0 [1558:0287]
Nov 30 10:51:27 localhost kernel: Yenta: Enabling burst memory read transactions
Nov 30 10:51:27 localhost kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
Nov 30 10:51:27 localhost kernel: Yenta: Routing CardBus interrupts to PCI
Nov 30 10:51:27 localhost kernel: Yenta TI: socket 0000:00:0c.0, mfunc 0x00921c22, devctl 0x64
Nov 30 10:51:27 localhost kernel: irq 11: nobody cared!
Nov 30 10:51:27 localhost kernel:  [__report_bad_irq+42/160] __report_bad_irq+0x2a/0xa0
Nov 30 10:51:27 localhost kernel:  [handle_IRQ_event+61/112] handle_IRQ_event+0x3d/0x70
Nov 30 10:51:27 localhost kernel:  [note_interrupt+130/160] note_interrupt+0x82/0xa0
Nov 30 10:51:27 localhost kernel:  [__do_IRQ+240/256] __do_IRQ+0xf0/0x100
Nov 30 10:51:27 localhost kernel:  [do_IRQ+25/48] do_IRQ+0x19/0x30
Nov 30 10:51:27 localhost kernel:  [common_interrupt+26/32] common_interrupt+0x1a/0x20
Nov 30 10:51:27 localhost kernel:  [__do_softirq+46/160] __do_softirq+0x2e/0xa0
Nov 30 10:51:27 localhost kernel:  [do_softirq+38/48] do_softirq+0x26/0x30
Nov 30 10:51:27 localhost kernel:  [do_IRQ+30/48] do_IRQ+0x1e/0x30
Nov 30 10:51:27 localhost kernel:  [common_interrupt+26/32] common_interrupt+0x1a/0x20
Nov 30 10:51:27 localhost kernel:  [sched_clock+82/144] sched_clock+0x52/0x90
Nov 30 10:51:27 localhost kernel:  [schedule+97/1456] schedule+0x61/0x5b0
Nov 30 10:51:27 localhost kernel:  [schedule_timeout+93/208] schedule_timeout+0x5d/0xd0
Nov 30 10:51:27 localhost kernel:  [schedule_timeout+93/208] schedule_timeout+0x5d/0xd0
Nov 30 10:51:27 localhost kernel:  [process_timeout+0/16] process_timeout+0x0/0x10
Nov 30 10:51:27 localhost kernel:  [msleep+47/64] msleep+0x2f/0x40
Nov 30 10:51:27 localhost kernel:  [pg0+476931721/1069827072] yenta_probe_cb_irq+0xd9/0x130 [yenta_socket]
Nov 30 10:51:27 localhost kernel:  [pg0+476931440/1069827072] yenta_probe_handler+0x0/0x40 [yenta_socket]
Nov 30 10:51:27 localhost kernel:  [pg0+476927321/1069827072] ti12xx_irqroute_func0+0x99/0x370 [yenta_socket]
Nov 30 10:51:27 localhost kernel:  [pg0+476929388/1069827072] ti12xx_override+0xfc/0x1b0 [yenta_socket]
Nov 30 10:51:27 localhost kernel:  [pg0+476932868/1069827072] yenta_probe+0x254/0x270 [yenta_socket]
Nov 30 10:51:27 localhost kernel:  [pci_device_probe_static+69/80] pci_device_probe_static+0x45/0x50
Nov 30 10:51:27 localhost kernel:  [__pci_device_probe+59/96] __pci_device_probe+0x3b/0x60
Nov 30 10:51:27 localhost kernel:  [pci_device_probe+44/80] pci_device_probe+0x2c/0x50
Nov 30 10:51:27 localhost kernel:  [driver_probe_device+47/128] driver_probe_device+0x2f/0x80
Nov 30 10:51:27 localhost kernel:  [driver_attach+89/144] driver_attach+0x59/0x90
Nov 30 10:51:27 localhost kernel:  [bus_add_driver+153/224] bus_add_driver+0x99/0xe0
Nov 30 10:51:27 localhost kernel:  [pci_device_shutdown+0/48] pci_device_shutdown+0x0/0x30
Nov 30 10:51:27 localhost kernel:  [pci_register_driver+93/128] pci_register_driver+0x5d/0x80
Nov 30 10:51:27 localhost kernel:  [pg0+476635151/1069827072] yenta_socket_init+0xf/0x11 [yenta_socket]
Nov 30 10:51:27 localhost kernel:  [sys_init_module+214/448] sys_init_module+0xd6/0x1c0
Nov 30 10:51:27 localhost kernel:  [syscall_call+7/11] syscall_call+0x7/0xb
Nov 30 10:51:27 localhost kernel: handlers:
Nov 30 10:51:27 localhost kernel: [pg0+476192416/1069827072] (usb_hcd_irq+0x0/0x80 [usbcore])
Nov 30 10:51:27 localhost kernel: [pg0+476192416/1069827072] (usb_hcd_irq+0x0/0x80 [usbcore])
Nov 30 10:51:27 localhost kernel: Disabling IRQ #11
Nov 30 10:51:27 localhost kernel: Yenta TI: socket 0000:00:0c.0 probing PCI interrupt failed, trying to fix
Nov 30 10:51:27 localhost kernel: 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Nov 30 10:51:27 localhost kernel: Yenta TI: socket 0000:00:0c.0 no PCI interrupts. Fish. Please report.
Nov 30 10:51:27 localhost kernel: Yenta: ISA IRQ mask 0x0410, PCI irq 0
Nov 30 10:51:27 localhost kernel: Socket status: 30000006
Nov 30 10:51:27 localhost kernel: PCI: Enabling device 0000:00:0c.1 (0000 -> 0002)
Nov 30 10:51:27 localhost kernel: PCI: IRQ 0 for device 0000:00:0c.1 doesn't match PIRQ mask - try pci=usepirqmask
Nov 30 10:51:27 localhost kernel: PCI: setting IRQ 10 as level-triggered
Nov 30 10:51:27 localhost kernel: PCI: Assigned IRQ 10 for device 0000:00:0c.1
Nov 30 10:51:27 localhost kernel: Yenta: CardBus bridge found at 0000:00:0c.1 [1558:0287]
Nov 30 10:51:27 localhost kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
Nov 30 10:51:27 localhost kernel: Yenta: Routing CardBus interrupts to PCI
Nov 30 10:51:27 localhost kernel: Yenta TI: socket 0000:00:0c.1, mfunc 0x00921c22, devctl 0x64
Nov 30 10:51:27 localhost kernel: irq 3: nobody cared!
Nov 30 10:51:27 localhost kernel:  [__report_bad_irq+42/160] __report_bad_irq+0x2a/0xa0
Nov 30 10:51:27 localhost kernel:  [handle_IRQ_event+61/112] handle_IRQ_event+0x3d/0x70
Nov 30 10:51:27 localhost kernel:  [note_interrupt+130/160] note_interrupt+0x82/0xa0
Nov 30 10:51:27 localhost kernel:  [__do_IRQ+240/256] __do_IRQ+0xf0/0x100
Nov 30 10:51:27 localhost kernel:  [do_IRQ+25/48] do_IRQ+0x19/0x30
Nov 30 10:51:27 localhost kernel:  [common_interrupt+26/32] common_interrupt+0x1a/0x20
Nov 30 10:51:27 localhost kernel:  [handle_IRQ_event+24/112] handle_IRQ_event+0x18/0x70
Nov 30 10:51:27 localhost kernel:  [__do_IRQ+166/256] __do_IRQ+0xa6/0x100
Nov 30 10:51:27 localhost kernel:  [do_IRQ+25/48] do_IRQ+0x19/0x30
Nov 30 10:51:27 localhost kernel:  [common_interrupt+26/32] common_interrupt+0x1a/0x20
Nov 30 10:51:27 localhost kernel:  [__do_softirq+46/160] __do_softirq+0x2e/0xa0
Nov 30 10:51:27 localhost kernel:  [do_softirq+38/48] do_softirq+0x26/0x30
Nov 30 10:51:27 localhost kernel:  [do_IRQ+30/48] do_IRQ+0x1e/0x30
Nov 30 10:51:27 localhost kernel:  [common_interrupt+26/32] common_interrupt+0x1a/0x20
Nov 30 10:51:27 localhost kernel:  [__mod_timer+115/144] __mod_timer+0x73/0x90
Nov 30 10:51:27 localhost kernel:  [schedule_timeout+88/208] schedule_timeout+0x58/0xd0
Nov 30 10:51:27 localhost kernel:  [process_timeout+0/16] process_timeout+0x0/0x10
Nov 30 10:51:27 localhost kernel:  [msleep+47/64] msleep+0x2f/0x40
Nov 30 10:51:27 localhost kernel:  [pg0+476931721/1069827072] yenta_probe_cb_irq+0xd9/0x130 [yenta_socket]
Nov 30 10:51:27 localhost kernel:  [pg0+476931440/1069827072] yenta_probe_handler+0x0/0x40 [yenta_socket]
Nov 30 10:51:27 localhost kernel:  [pg0+476928601/1069827072] ti12xx_irqroute_func1+0xc9/0x2e0 [yenta_socket]
Nov 30 10:51:27 localhost kernel:  [pg0+476929416/1069827072] ti12xx_override+0x118/0x1b0 [yenta_socket]
Nov 30 10:51:27 localhost kernel:  [pg0+476932868/1069827072] yenta_probe+0x254/0x270 [yenta_socket]
Nov 30 10:51:27 localhost kernel:  [pci_device_probe_static+69/80] pci_device_probe_static+0x45/0x50
Nov 30 10:51:27 localhost kernel:  [__pci_device_probe+59/96] __pci_device_probe+0x3b/0x60
Nov 30 10:51:27 localhost kernel:  [pci_device_probe+44/80] pci_device_probe+0x2c/0x50
Nov 30 10:51:27 localhost kernel:  [driver_probe_device+47/128] driver_probe_device+0x2f/0x80
Nov 30 10:51:27 localhost kernel:  [driver_attach+89/144] driver_attach+0x59/0x90
Nov 30 10:51:27 localhost kernel:  [bus_add_driver+153/224] bus_add_driver+0x99/0xe0
Nov 30 10:51:27 localhost kernel:  [pci_device_shutdown+0/48] pci_device_shutdown+0x0/0x30
Nov 30 10:51:27 localhost kernel:  [pci_register_driver+93/128] pci_register_driver+0x5d/0x80
Nov 30 10:51:27 localhost kernel:  [pg0+476635151/1069827072] yenta_socket_init+0xf/0x11 [yenta_socket]
Nov 30 10:51:27 localhost kernel:  [sys_init_module+214/448] sys_init_module+0xd6/0x1c0
Nov 30 10:51:27 localhost kernel:  [syscall_call+7/11] syscall_call+0x7/0xb
Nov 30 10:51:27 localhost kernel: handlers:
Nov 30 10:51:27 localhost kernel: [pg0+476192416/1069827072] (usb_hcd_irq+0x0/0x80 [usbcore])
Nov 30 10:51:27 localhost kernel: [pg0+476687008/1069827072] (ohci_irq_handler+0x0/0x890 [ohci1394])
Nov 30 10:51:27 localhost kernel: Disabling IRQ #3
Nov 30 10:51:27 localhost kernel: Yenta TI: socket 0000:00:0c.1 probing PCI interrupt failed, trying to fix
Nov 30 10:51:27 localhost kernel: Yenta TI: socket 0000:00:0c.1 no PCI interrupts. Fish. Please report.
Nov 30 10:51:27 localhost kernel: Yenta: ISA IRQ mask 0x0010, PCI irq 0
Nov 30 10:51:27 localhost kernel: Socket status: 30000006
Nov 30 10:51:27 localhost kernel: Adding 610460k swap on /dev/hda4.  Priority:-1 extents:1
Nov 30 10:51:27 localhost kernel: EXT3 FS on hda2, internal journal
Nov 30 10:51:27 localhost kernel: kjournald starting.  Commit interval 5 seconds
Nov 30 10:51:27 localhost kernel: EXT3 FS on hda5, internal journal
Reply to:
Follow-Ups:
- Bug#341378: kernel 2.6.12 and 2.6.14 crash on boot loading usb drivers on a sis chipset
  - From: Maximilian Attems <maks@sternwelten.at>
Prev by Date: Re: 2.4.27-12 for Sid
Next by Date: Re: Bug#341035: kernel-source-2.6.8: [PATCH] CH Products USB yoke and pedals recognized but frozen by SET_IDLE
Previous by thread: Bug#319789: marked as done (kernel-image-2.6.11-1-k7: Does not detect builtin MPU of via82C686)
Next by thread: Bug#341378: kernel 2.6.12 and 2.6.14 crash on boot loading usb drivers on a sis chipset
Index(es):
- Date
- Thread