[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#256374: Is this Hardware or Software or both?

I think the original intent of this Debian Bug report was lost, on with the pcmcia distraction, even after the posting dated "Thu, 01 Jul 2004 10:29:06 -0300".
With only one distribution exception (which later fails for a different reason), most of the 2.6 kernel distributions do NOT install on a Compaq Presario 1220 including "Debian GNU/Linux testing "Etch"".
As with the comments from "Thu, 1 Jul 2004 10:08:23 -0400", I believe the problem is the duplicate use of IRQ 14 for both ide0 and ide1: 


Nov 19 20:46:40 kernel: Cyrix 5520: IDE controller at PCI slot 0000:00:12.0
Nov 19 20:46:40 kernel:     ide0: BM-DMA at 0x5000-0x5007, BIOS settings: hda:pio, hdb:DMA
Nov 19 20:46:40 kernel:     ide1: BM-DMA at 0x5008-0x500f, BIOS settings: hdc:pio, hdd:DMA
Nov 19 20:46:40 kernel: Probing IDE interface ide0...
Nov 19 20:46:41 kernel: hda: HITACHI_DK226A-21U, ATA DISK drive
Nov 19 20:46:41 kernel: PIO clocking = 4	
Nov 19 20:46:41 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 19 20:46:41 kernel: Probing IDE interface ide1...
Nov 19 20:46:42 kernel: hdc: CD-ROM CDR_U200, ATAPI CD/DVD-ROM drive
Nov 19 20:46:42 kernel: PIO clocking = 4
Nov 19 20:46:42 kernel: hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
Nov 19 20:46:42 kernel: hdc: set_drive_speed_status: error=0x04 { AbortedCommand }
Nov 19 20:46:42 kernel: ide1 at 0x170-0x177,0x376 on irq 14
Nov 19 20:46:45 debconf: --> PROGRESS STEP 29
Nov 19 20:46:45 debconf: <-- 0 OK
Nov 19 20:46:45 hw-detect: Detected module 'ide-cd' for 'Linux ATAPI CD-ROM'
Nov 19 20:46:45 debconf: --> SUBST hw-detect/load_progress_step CARDNAME Linux ATAPI CD-ROM
Nov 19 20:46:45 debconf: Adding [CARDNAME] -> [Linux ATAPI CD-ROM]
Nov 19 20:46:45 debconf: <-- 0
Nov 19 20:46:45 debconf: --> SUBST hw-detect/load_progress_step MODULE ide-cd
Nov 19 20:46:45 debconf: Adding [MODULE] -> [ide-cd]
Nov 19 20:46:45 debconf: <-- 0
Nov 19 20:46:46 debconf: --> PROGRESS INFO hw-detect/load_progress_step
Nov 19 20:46:46 debconf: <-- 0 OK
Nov 19 20:46:46 hw-detect: Trying to load module 'ide-cd'
Nov 19 20:46:46 hw-detect: Using /lib/modules/2.6.12-1-386/kernel/drivers/ide/ide-core.ko
Nov 19 20:46:46 hw-detect: insmod: Nov 19 20:46:46 hw-detect: cannot insert `/lib/modules/2.6.12-1-386/kernel/drivers/ide/ide-core.ko': File exists (-1) 
Nov 19 20:46:46 hw-detect: : File exists
Nov 19 20:46:46 hw-detect: Using /lib/modules/2.6.12-1-386/kernel/drivers/cdrom/cdrom.ko
Nov 19 20:46:56 init: ^MStarting pid 1073, console /dev/vc/2: '/bin/sh'
Nov 19 20:47:46 kernel: ide-cd: cmd 0x5a timed out
Nov 19 20:47:46 kernel: hdc: lost interrupt
Nov 19 20:47:51 kernel: ide-cd: cmd 0x5a timed out
Nov 19 20:47:51 kernel: hdc: lost interrupt
Nov 19 20:48:51 kernel: ide-cd: cmd 0x5a timed out
Nov 19 20:48:51 kernel: hdc: lost interrupt
Nov 19 20:48:51 kernel: hdc: ATAPI 16X CD-ROM drive, 128kB Cache
Nov 19 20:48:51 kernel: Uniform CD-ROM driver Revision: 3.20
Nov 19 20:49:51 kernel: hdc: lost interrupt
Nov 19 20:50:51 kernel: hdc: lost interrupt
I hope this is the correct way to bring attention to the widespread 2.6 kernel rollout problem for the Compaq Presario 1220. 

Sincerely,
Kelly Quiros
Reply to: