Bug#337812: linux-2.6: DVD drive not recognized on IBM ThinkPad T43p
Package: linux-2.6
Severity: wishlist
The T43p uses a PATA DVD drive on a SATA-PATA bridge on a SATA port of the chipset (ICH6M).
This setup is supposedly usable with 2.6.14, provided libata is loaded with the atapi_enabled=1 module option.
Here is more information about the system:
sp8472@Maik-2013:~$ lspci
0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
0000:00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc M24 1T [FireGL M24 GL] (rev 80)
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
0000:04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
0000:04:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
Note: Full dmesg is at the end, important stuff for now
sp8472@Maik-2013:~$ dmesg | egrep -i '^ata|scsi'
SCSI subsystem initialized
ata_piix version 1.04
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18C0 irq 14
ata1: dev 0 cfg 49:0f00 82:746b 83:5be8 84:4003 85:f46b 86:1848 87:4003 88:203f
ata1: dev 0 ATA, max UDMA/100, 117210240 sectors:
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Type: Direct-Access ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18C8 irq 15
ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2(0): applying bridge limits
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
SCSI device sda: drive cache: write back
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
sp8472@Maik-2013:~$ ll -d /dev/{s*,c*,d*}
crw------- 1 root root 5, 1 2005-11-06 17:26 /dev/console
lrwxrwxrwx 1 root root 11 2005-11-06 17:26 /dev/core -> /proc/kcore
drwxr-xr-x 5 root root 0 2005-11-06 17:26 /dev/disk
drwxr-xr-x 2 root root 0 2005-11-06 17:26 /dev/dri
crw-rw---- 1 root audio 14, 3 2005-11-06 17:26 /dev/dsp
brw-rw---- 1 root disk 8, 0 2005-11-06 17:26 /dev/sda
brw-rw---- 1 root disk 8, 1 2005-11-06 17:26 /dev/sda1
brw-rw---- 1 root disk 8, 2 2005-11-06 17:26 /dev/sda2
drwxrwxrwt 2 root root 40 2005-11-06 17:26 /dev/shm
drwxr-xr-x 2 root root 0 2005-11-06 17:26 /dev/snd
lrwxrwxrwx 1 root root 24 2005-11-06 17:26 /dev/sndstat -> /proc/asound/oss/sndstat
lrwxrwxrwx 1 root root 15 2005-11-06 17:26 /dev/stderr -> /proc/self/fd/2
lrwxrwxrwx 1 root root 15 2005-11-06 17:26 /dev/stdin -> /proc/self/fd/0
lrwxrwxrwx 1 root root 15 2005-11-06 17:26 /dev/stdout -> /proc/self/fd/1
sp8472@Maik-2013:~$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HTS726060M9AT00 Rev: MH4O
Type: Direct-Access ANSI SCSI revision: 05
sp8472@Maik-2013:/sys/class/scsi_device$ ll
total 0
drwxr-xr-x 2 root root 0 2005-11-06 17:26 0:0:0:0
sp8472@Maik-2013:/etc/mkinitramfs$ egrep -v '^#|^$' initramfs.conf
MODULES=dep
RESUME=/dev/sda2
BOOT=local
DEVICE=eth0
NFSROOT=auto
sp8472@Maik-2013:/etc/mkinitramfs$ egrep -v '^#|^$' modules
libata atapi_enabled=1
ahci
sd_mod
scsi_mod
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (990, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.14-1-686
Locale: LANG=de_DE.UTF-8@euro, LC_CTYPE=de_DE.UTF-8@euro (charmap=UTF-8)
This is everything dmesg outputs. Note that something is missing at the beginning. dmesg buffer is probably too small for this system.
"pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: 3000-3fff
MEM window: a8100000-a81fffff
PREFETCH window: c0000000-c7ffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: a8200000-a82fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: 4000-4fff
MEM window: a8300000-a83fffff
PREFETCH window: c8000000-c80fffff
PCI: Bus 5, cardbus bridge: 0000:04:00.0
IO window: 00005000-000050ff
IO window: 00005400-000054ff
PREFETCH window: d0000000-d1ffffff
MEM window: aa000000-abffffff
PCI: Bridge: 0000:00:1e.0
IO window: 5000-8fff
MEM window: a8400000-b7ffffff
PREFETCH window: d0000000-d7ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
audit(1131294377.960:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: Device 00:08 activated.
ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 225
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI wakeup devices:
LID SLPB UART EXP0 EXP1 EXP2 EXP3 PCI1 USB0 USB1 USB3 USB7 AC9M
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 180k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 1
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
tg3.c:v3.42 (Oct 3, 2005)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:11:25:49:58:2e
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000]
uhci_hcd: Unknown symbol usb_hcd_pci_suspend
uhci_hcd: Unknown symbol usb_hcd_resume_root_hub
uhci_hcd: Unknown symbol usb_hcd_pci_probe
uhci_hcd: Unknown symbol usb_check_bandwidth
uhci_hcd: Unknown symbol usb_disabled
uhci_hcd: Unknown symbol usb_release_bandwidth
uhci_hcd: Unknown symbol usb_claim_bandwidth
uhci_hcd: Unknown symbol usb_hcd_pci_resume
uhci_hcd: Unknown symbol usb_hcd_giveback_urb
uhci_hcd: Unknown symbol usb_hcd_poll_rh_status
uhci_hcd: Unknown symbol usb_hcd_pci_remove
uhci_hcd: Unknown symbol usb_hcd_pci_suspend
uhci_hcd: Unknown symbol usb_hcd_resume_root_hub
uhci_hcd: Unknown symbol usb_hcd_pci_probe
uhci_hcd: Unknown symbol usb_check_bandwidth
uhci_hcd: Unknown symbol usb_disabled
uhci_hcd: Unknown symbol usb_release_bandwidth
uhci_hcd: Unknown symbol usb_claim_bandwidth
uhci_hcd: Unknown symbol usb_hcd_pci_resume
uhci_hcd: Unknown symbol usb_hcd_giveback_urb
uhci_hcd: Unknown symbol usb_hcd_poll_rh_status
uhci_hcd: Unknown symbol usb_hcd_pci_remove
ehci_hcd: Unknown symbol usb_hcd_pci_suspend
ehci_hcd: Unknown symbol usb_free_urb
ehci_hcd: Unknown symbol usb_hub_tt_clear_buffer
ehci_hcd: Unknown symbol usb_hcd_pci_probe
ehci_hcd: Unknown symbol usb_disabled
ehci_hcd: Unknown symbol usb_unlock_device
ehci_hcd: Unknown symbol usb_put_dev
ehci_hcd: Unknown symbol usb_get_dev
ehci_hcd: Unknown symbol usb_lock_device
ehci_hcd: Unknown symbol usb_calc_bus_time
ehci_hcd: Unknown symbol usb_hcd_pci_resume
ehci_hcd: Unknown symbol usb_get_urb
ehci_hcd: Unknown symbol usb_hcd_giveback_urb
ehci_hcd: Unknown symbol usb_set_device_state
ehci_hcd: Unknown symbol usb_hcd_pci_remove
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001800
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hw_random: RNG not detected
hsfengine: module license 'see LICENSE file distributed with driver' taints kernel.
SCSI subsystem initialized
libata version 1.12 loaded.
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 233, io base 0x00001820
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
wlan: 0.8.6.0 (EXPERIMENTAL)
ath_rate_onoe: 1.0
ath_pci: 0.9.6.0 (EXPERIMENTAL)
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 50, io base 0x00001840
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 58, io base 0x00001860
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
ahci version 1.01
ahci: probe of 0000:00:1f.2 failed with error -12
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 225
NVM_WriteFile: cannot open /etc/hsfmodem/nvm/dynamic/0-PCI-8086:266d-1014:0574/PCI_DEVICE_ID (errno=-2)
NVM_WriteFile: cannot open /etc/hsfmodem/nvm/dynamic/0-PCI-8086:266d-1014:0574/PCI_VENDOR_ID (errno=-2)
NVM_WriteFile: cannot open /etc/hsfmodem/nvm/dynamic/0-PCI-8086:266d-1014:0574/HARDWARE_ID (errno=-2)
NVM_WriteFile: cannot open /etc/hsfmodem/nvm/dynamic/0-PCI-8086:266d-1014:0574/LICENSE_STATUS (errno=-2)
NVM_WriteFile: cannot open /etc/hsfmodem/nvm/dynamic/0-PCI-8086:266d-1014:0574/PREVIOUS_COUNTRY_CODE (errno=-2)
NVM_WriteFile: cannot open /etc/hsfmodem/nvm/dynamic/0-PCI-8086:266d-1014:0574/COUNTRY_CODE (errno=-2)
PCI: Setting latency timer of device 0000:00:1e.3 to 64
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
ttySHSF0 at I/O 0x2400 (irq = 225) is a Conexant HSF softmodem (PCI-8086:266d-1014:0574)
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Yenta: CardBus bridge found at 0000:04:00.0 [1014:056c]
ata_piix version 1.04
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18C0 irq 14
Yenta: ISA IRQ mask 0x04b8, PCI irq 169
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff
cs: IO port probe 0x5000-0x8fff: clean.
pcmcia: parent PCI bridge Memory window: 0xa8400000 - 0xb7ffffff
pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff
ata1: dev 0 cfg 49:0f00 82:746b 83:5be8 84:4003 85:f46b 86:1848 87:4003 88:203f
ata1: dev 0 ATA, max UDMA/100, 117210240 sectors:
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA Model: HTS726060M9AT00 Rev: MH4O
Type: Direct-Access ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18C8 irq 15
usb 1-1.1: new full speed USB device using uhci_hcd and address 3
usb 1-1.3: new low speed USB device using uhci_hcd and address 4
ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2(0): applying bridge limits
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 66
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Build date: Nov 1 2005
Debugging version (IEEE80211)
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: H/W encryption support: WEP AES AES_CCM TKIP
ath0: mac 5.9 phy 4.3 radio 3.6
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
Debugging version (ATH)
ath0: Atheros 5212: mem=0xa8400000, irq=66
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
usbcore: registered new driver hiddev
usbcore: registered new driver yealink
drivers/usb/input/yealink.c: Yealink phone driver:yld-20050816
input: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hu] on usb-0000:00:1d.0-1.1
input: USB HID v1.10 Device [Lite-On Technology USB Productivity Option Keyboard( has the hu] on usb-0000:00:1d.0-1.1
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.3
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (61 C)
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
XFS mounting filesystem sda1
Ending clean XFS mount for filesystem: sda1
mice: PS/2 mouse device common for all mice
pnp: Device 00:09 activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
hw_random: RNG not detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 58, io mem 0xa8000000
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1e.2 to 64
usb 1-1: USB disconnect, address 2
usb 1-1.1: USB disconnect, address 3
usb 1-1.3: USB disconnect, address 4
usb 1-1: new full speed USB device using uhci_hcd and address 5
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
usb 1-1.1: new full speed USB device using uhci_hcd and address 6
intel8x0_measure_ac97_clock: measured 50512 usecs
intel8x0: clocking to 48000
input: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hu] on usb-0000:00:1d.0-1.1
input: USB HID v1.10 Device [Lite-On Technology USB Productivity Option Keyboard( has the hu] on usb-0000:00:1d.0-1.1
usb 1-1.3: new low speed USB device using uhci_hcd and address 7
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.3
Adding 2939884k swap on /dev/sda2. Priority:-1 extents:1 across:2939884k
ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
ibm_acpi: http://ibm-acpi.sf.net/
ibm_acpi: dock device not present
hdaps: IBM ThinkPad T43 detected.
hdaps: initial latch check good (0x03).
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint on synaptics-pt/serio0
hdaps: device successfully initialized.
hdaps: driver successfully loaded.
acpi-cpufreq: CPU0 - ACPI performance management activated.
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03148a0(lo)
IPv6 over IPv4 tunneling driver
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
[fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[fglrx] module loaded - fglrx 8.18.6 [Oct 11 2005] on minor 0
NET: Registered protocol family 17
[fglrx] free PCIe = 54804480
[fglrx] max PCIe = 54804480
[fglrx] free LFB = 108908544
[fglrx] max LFB = 108908544
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total PCIe = 16384
eth0: no IPv6 routers present
ACPI: PCI interrupt for device 0000:04:02.0 disabled
ath_pci: driver unloaded
ath_rate_onoe: unloaded
wlan: driver unloaded
ath_hal: driver unloaded
Reply to: