Bug#331261: linux-image-2.6.12-1-amd64-k8: Oops when mounting DVD; unsup command in ide-scsi
Package: linux-image-2.6.12-1-amd64-k8
Version: 2.6.12-10
Severity: grave
Justification: renders package unusable
*** Please type your report below this line ***
When I try to mount a DVD (mount /media/cdrom1) under this kernel, I
get an oops in ide-scsi. The problem does not exist under the
2.6.11-9-amd64-k8 kernel. The system fails to shutdown properly after
this oops as well; it does the broadcast message from root but then
hangs; I can still shutdown with Alt+SysRq+SUB. Note that I have no
particular intent or desire for ide-scsi to grab my optical drives in the
first place; a suitable workaround for me would be to somehow disable
ide-scsi. Dmesg output when I atempt to mount the DVD after logging
in follows.
Bootdata ok (command line is root=/dev/sda1 ro hda=cdrom hdc=cdrom )
Linux version 2.6.12-1-amd64-k8 (buildd@athlon) (gcc version 4.0.2
(Debian 4.0.1-9)) #1 Wed Sep 28 02:31:26 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7750
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x000000003fff3040
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x000000003fff30c0
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x000000003fff7dc0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @
0x0000000000000000
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 258032 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
Checking aperture...
CPU 0: aperture @ f0000000 size 128 MB
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro hda=cdrom hdc=cdrom
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 2411.013 MHz processor.
time.c: Using PIT/TSC based timekeeping.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1025360k/1048512k available (1789k kernel code, 22576k
reserved, 999k data, 148k init)
Calibrating delay loop... 4767.74 BogoMIPS (lpj=2383872)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3400+ stepping 00
Using local APIC timer interrupts.
Detected 12.557 MHz APIC timer.
testing NMI watchdog ... OK.
checking if image is initramfs...it isn't (bad gzip magic numbers);
looks like an initrd
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: Power Resource [ISAV] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: AGP aperture is 128M @ 0xf0000000
PCI-DMA: Disabling IOMMU.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:00' and the driver 'system'
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
pnp: 00:00: ioport range 0x4400-0x447f has been reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:00: ioport range 0x4800-0x487f has been reserved
pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: match found with the PnP device '00:02' and the driver 'system'
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1128257975.185:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Linux agpgart interface v0.101 (c) Dave Jones
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:0b' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:0a' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:08' and the driver 'serial'
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
ACPI: (supports S0 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 1660KiB [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.11 loaded.
sata_nv version 0.6
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 23 (level,
high) -> IRQ 23
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xF500 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xF508 irq 23
ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3469 86:3c01 87:4003 88:203f
ata1: dev 0 ATA, max UDMA/100, 488397168 sectors: lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device removed
ata1: dev 0 configured for UDMA/100
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
Vendor: ATA Model: WDC WD2500JD-00K Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
Probing IDE interface ide0...
hda: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
hdc: TSST CDW/DVD TS-H492A, ATAPI CD/DVD-ROM drive
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-scsi is deprecated for cd burning! Use ide-cd and give
dev=/dev/hdX as device
scsi2 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TSSTcorp Model: CD/DVDW TS-H552B Rev: TS02
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 5
scsi3 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TSSTcorp Model: CDW/DVD TS-H492A Rev: TB03
Type: CD-ROM ANSI SCSI revision: 02
sr1: scsi3-mmc drive: 10x/10x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi3, channel 0, id 0, lun 0
Attached scsi generic sg2 at scsi3, channel 0, id 0, lun 0, type 5
Adding 1461872k swap on /dev/sda5. Priority:-1 extents:1
Generic RTC Driver v1.07
NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
NFORCE3-250: chipset revision 162
NFORCE3-250: not 100% native mode: will probe irqs later
NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
NFORCE3-250: port 0x01f0 already claimed by ide0
NFORCE3-250: port 0x0170 already claimed by ide1
NFORCE3-250: neither IDE port enabled (BIOS)
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level,
low) -> IRQ 16
NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-7174 Tue
Mar 22 06:45:40 PST 2005
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
ts: Compaq touchscreen protocol output
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4)
powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x2 (1500 mV)
powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x6 (1400 mV)
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa (1300 mV)
powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe (1200 mV)
powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
cpu_init done, current fid 0x10, vid 0x2
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
ReiserFS: sda7: journal params: device sda7, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda7: checking transaction log (sda7)
ReiserFS: sda7: Using r5 hash to sort names
ReiserFS: sda6: found reiserfs format "3.6" with standard journal
ReiserFS: sda6: using ordered data mode
ReiserFS: sda6: journal params: device sda6, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda6: checking transaction log (sda6)
ReiserFS: sda6: Using r5 hash to sort names
loop: loaded (max 8 devices)
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level,
low) -> IRQ 19
PCI: Via IRQ fixup for 0000:02:0b.0, from 11 to 3
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]
MMIO=[feafe000-feafe7ff] Max Packet=[2048]
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level,
low) -> IRQ 16
eth0: RealTek RTL8139 at 0xffffc20000584000, 00:11:95:1e:18:41, IRQ 16
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level,
high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: nVidia Corporation CK8S USB Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 22, io mem 0xfebff000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level,
high) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: nVidia Corporation CK8S USB Controller (#2)
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.1: irq 21, io mem 0xfebfe000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level,
high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: nVidia Corporation nForce3 EHCI USB 2.0 Controller
ehci_hcd 0000:00:02.2: debug port 1
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.2: irq 20, io mem 0xfebfd000
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d0000d0fc2f]
eth1394: $Rev: 1247 $ Ben Collins <bcollins@debian.org>
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 23 (level,
high) -> IRQ 23
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49709 usecs
intel8x0: clocking to 46785
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:09' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff80386fc0(lo)
IPv6 over IPv4 tunneling driver
lp0: using parport0 (interrupt-driven).
Found system call table at 0xffffffff8040f140 (scan: close+ioctl)
Found 32-bit system call table at 0xffffffff80315080 (exported)
Starting AFS cache scan...found 462 non-empty cache files (18%).
eth0: no IPv6 routers present
ide-scsi: unsup command: dev hda: flags = REQ_CMD REQ_STARTED
sector 64, nr/cnr 2/2
bio ffff81003a6f3080, biotail ffff81003a6f3080, buffer
ffff8100395bf000, data 0000000000000000, len 0
end_request: I/O error, dev hda, sector 64
isofs_fill_super: bread failed, dev=hda, iso_blknum=16, block=32
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff801d5fb2>{strlen+2}
PGD 39541067 PUD 39479067 PMD 0
Oops: 0000 [1]
CPU 0
Modules linked in: isofs openafs lp md5 ipv6 parport_pc parport floppy
pcspkr shpchp pci_hotplug snd_intel8x0 snd_ac97_codec snd_pcm_oss
snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc eth1394
ehci_hcd ohci_hcd 8139too mii ohci1394 ext2 mbcache loop
cpufreq_userspace powernow_k8 freq_table processor w83627hf tsdev
evdev eeprom i2c_sensor i2c_isa i2c_nforce2 i2c_core nvidia sbp2
ieee1394 psmouse ide_disk ide_cd amd74xx genrtc ide_generic reiserfs
ide_scsi ide_core sr_mod cdrom sd_mod sata_nv libata sg scsi_mod unix
fbcon tileblit font bitblit vesafb cfbcopyarea cfbimgblt cfbfillrect
softcursor
Pid: 4561, comm: mount Tainted: P 2.6.12-1-amd64-k8
RIP: 0010:[<ffffffff801d5fb2>] <ffffffff801d5fb2>{strlen+2}
RSP: 0018:ffff810039be5c30 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000d0
RDX: 0000000000000000 RSI: 00000000000000d0 RDI: 0000000000000000
RBP: 00000000000000d0 R08: ffff81003ecda500 R09: 000000000000000d
R10: 000000000000000e R11: ffffffff801e5c00 R12: ffff81003e73d4a8
R13: ffff81003e73d4a8 R14: 00000000000000d0 R15: ffff8100395bc000
FS: 00002aaaab00c6d0(0000) GS:ffffffff8040f940(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000039511000 CR4: 00000000000006e0
Process mount (pid: 4561, threadinfo ffff810039be4000, task ffff81003a36a0f0)
Stack: ffffffff801d398f 00000000fffffff4 00000000000000d0 0000000000000005
0000000000000000 0000000000000000 ffffffff801d4256 ffffffff887ec960
ffff81003ee1c080 ffffffff887ec960
Call Trace:<ffffffff801d398f>{kobject_get_path+31}
<ffffffff801d4256>{do_kobject_uevent+54}
<ffffffff80177215>{kill_block_super+37}
<ffffffff801776eb>{deactivate_super+59}
<ffffffff80177f52>{get_sb_bdev+306}
<ffffffff887e6320>{:isofs:isofs_fill_super+0}
<ffffffff801777d9>{do_kern_mount+185} <ffffffff8018d1b9>{do_mount+1545}
<ffffffff80161f2b>{do_no_page+1083}
<ffffffff80157a70>{buffered_rmqueue+448}
<ffffffff8011efd3>{do_page_fault+1171}
<ffffffff80157bcc>{__alloc_pages+188}
<ffffffff8015812e>{__get_free_pages+30} <ffffffff8018d306>{sys_mount+150}
<ffffffff8010e67a>{system_call+126}
Code: 80 3f 00 74 14 48 89 f8 66 66 90 66 66 90 48 ff c0 80 38 00
RIP <ffffffff801d5fb2>{strlen+2} RSP <ffff810039be5c30>
CR2: 0000000000000000
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (1050, 'testing'), (50, 'unstable')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.11-9-amd64-k8
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Versions of packages linux-image-2.6.12-1-amd64-k8 depends on:
ii coreutils [fileutils] 5.2.1-2.1 The GNU core utilities
ii e2fsprogs 1.38-2 ext2 file system utilities and lib
ii initrd-tools 0.1.82 tools to create initrd image for p
ii module-init-tools 3.2-pre8-1 tools for managing Linux kernel mo
linux-image-2.6.12-1-amd64-k8 recommends no packages.
-- no debconf information
Reply to: