Bug#322878: kernel-image-2.6.11-1-k7: Firewire sbp2 errors reported ... looks distrurbing
Package: kernel-image-2.6.11-1-k7
Version: 2.6.11-7
Severity: normal
Hi.
I'm using backuppc to backup my systems on an external Hard disk (160 Gb LaCie d2 Hard Drive Extreme with Triple Interface) connected through Firewire.
I've noticed corruption in the data in the past, so I started over and was monitoring ieee1394 messages in the log this time (after having repartitioned, reformatted and tested for bad blocks).
I've found these error messages :
Aug 13 09:34:19 shuttle kernel: ieee1394: sbp2: sbp2util_node_write_no_wait failed
Aug 13 09:34:19 shuttle last message repeated 8 times
Aug 13 09:34:48 shuttle kernel: ieee1394: sbp2: aborting sbp2 command
Aug 13 09:34:48 shuttle kernel: Write (10) 2a 00 0d 6c 0c bf 00 00 08 00
Aug 13 09:34:48 shuttle kernel: ieee1394: sbp2: aborting sbp2 command
Aug 13 09:34:48 shuttle kernel: Write (10) 2a 00 0d 6c 0c ef 00 00 08 00
Aug 13 09:34:48 shuttle kernel: ieee1394: sbp2: aborting sbp2 command
Aug 13 09:34:48 shuttle kernel: Write (10) 2a 00 0d 6c 0d 37 00 00 08 00
Aug 13 09:34:48 shuttle kernel: ieee1394: sbp2: aborting sbp2 command
Aug 13 09:34:48 shuttle kernel: Write (10) 2a 00 0d 6c 0d 57 00 00 08 00
Aug 13 09:34:48 shuttle kernel: ieee1394: sbp2: aborting sbp2 command
Aug 13 09:34:48 shuttle kernel: Write (10) 2a 00 0d 6c 0d 7f 00 00 08 00
Aug 13 09:34:48 shuttle kernel: ieee1394: sbp2: aborting sbp2 command
Aug 13 09:34:48 shuttle kernel: Write (10) 2a 00 0d 6c 0e 0f 00 00 08 00
Aug 13 09:34:48 shuttle kernel: ieee1394: sbp2: aborting sbp2 command
Aug 13 09:34:48 shuttle kernel: Write (10) 2a 00 0d 6c 0e 5f 00 00 08 00
Aug 13 09:34:48 shuttle kernel: ieee1394: sbp2: aborting sbp2 command
Aug 13 09:34:48 shuttle kernel: Write (10) 2a 00 0d 6c 0f 4f 00 00 08 00
Actually don't know if this is the same issue as in bug #312320 since I haven't experienced any freeze so far... but could be.
Also, I haven't been able to check if there is any data corrupted yet (backup still on-going)... but anyway, I feel these messages aren't normal.
My controller gives the following in lspci :
0000:00:0c.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at ec101000 (32-bit, non-prefetchable) [size=2K]
I/O ports at d400 [size=128]
Capabilities: [50] Power Management version 2
Best regards,
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.11-1-k7
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages kernel-image-2.6.11-1-k7 depends on:
ii coreutils [fileutils] 5.2.1-2 The GNU core utilities
ii fileutils 5.2.1-2 The GNU file management utilities
ii initrd-tools 0.1.81.1 tools to create initrd image for p
ii module-init-tools 3.2-pre1-2 tools for managing Linux kernel mo
kernel-image-2.6.11-1-k7 recommends no packages.
-- no debconf information
Reply to: