Bug#322729: i82365 driver trouble?
Package: linux-image-2.6.12-1-386
Version: 2.6.12-2
Hi,
I just installed linux-image-2.6.12-1-386 on a test system, and I get
these messages during boot:
Linux Kernel Card Services
options: [pci] [cardbus] [apm]
Intel ISA PCIC probe: not found
Device 'i82365.0' does not have a release() function, it is broken and
must be fixed.
Badness in device_release at drivers/base/core.c:83
[<c0195185>] kobject_cleanup+0x3f/0x64
[<c01951aa>] kobject_release+0x0/0xa
[<c01958f0>] kref_put+0x48/0x54
[<c01951ca>] kobject_put+0x16/0x19
[<c01951aa>] kobject_release+0x0/0xa
[<d0966d4f>] init_i82365+0x6f/0x164 [i82365]
[<c0127f3f>] sys_init_module+0xb8/0x176
[<c0102e9d>] syscall_call+0x7/0xb
* Using yenta_socket instead of i82365
cardmgr[3051]: no sockets found!
failed!
Loading the saved-state of the serial devices...
So far the system still seems to be running stably, but I thought you
would want to know about this. I'll attach the output of "lspci -vvv";
let me know if you need anything else.
Thanks
-- graham
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 5597 [SiS5582] (rev 10)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 255
0000:00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:01.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 14
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at 4000 [size=16]
0000:00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 10) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=4K]
0000:00:09.0 VGA compatible controller: Chips and Technologies F65555 HiQVPro (rev c6) (prog-if 00 [VGA])
Subsystem: Chips and Technologies F65555 HiQVPro
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
0000:00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at e2001000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Reply to: