Re: Bug#316393: setserial does not set closing_wait correctly on kernel 2.6.8
reassign 316393 kernel-source-2.6.8
thanks
Hi Dr. Oliver Muth
On Sat, Jul 02, 2005 at 08:27:35PM +0200, Dr. Oliver Muth wrote:
> Hi Ola,
>
> I compiled the kernel myself from Debian kernel-source-2.6.8-16. So I
> guess this is the package it belongs to.
Ok, I see.
> Sorry for bothering you with it.
No problem. Reassigning to that version now.
Regards,
// Ola
> Best regards
>
> Oliver
>
> Am Samstag, den 02.07.2005, 16:27 +0200 schrieb Ola Lundqvist:
> > Hello
> >
> > Looks like a kernel bug to me. To what package should I redirect
> > this bug?
> >
> > Regards,
> >
> > // Ola
> >
> > On Thu, Jun 30, 2005 at 07:54:06AM +0200, Dr. Oliver Muth wrote:
> > > Package: setserial
> > > Version: 2.17-41
> > > Severity: normal
> > >
> > > Hi!
> > >
> > > Maybe this is not a bug in setserial but in the 2.6.8 kernel:
> > > setserial reports high values for close_delay and closing_wait.
> > > When I try to change close_delay to 3000 with setserial, the is 30000,
> > > with 300 I get 3000.
> > >
> > > This is what I get from setserial with kernel 2.6.8:
> > > /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
> > > Baud_base: 115200, close_delay: 5000, divisor: 0
> > > closing_wait: 37856
> > > Flags: spd_normal skip_test
> > > With kernel 2.4.25 I got close_delay=50 and
> > > closing_wait=3000.
> > >
> > > Best regards
> > >
> > > Oliver
> > >
> > > -- System Information:
> > > Debian Release: 3.1
> > > APT prefers testing
> > > APT policy: (500, 'testing')
> > > Architecture: i386 (i686)
> > > Kernel: Linux 2.6.8
> > > Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)
> > >
> > > Versions of packages setserial depends on:
> > > ii debconf 1.4.30.13 Debian configuration management sy
> > > ii libc6 2.3.2.ds1-22 GNU C Library: Shared libraries an
> > >
> > > -- debconf information:
> > > setserial/rc-boot-file-removed:
> > > setserial/rc-boot-file-renamed:
> > > setserial/update-modules-failed:
> > > setserial/autosave: true
> > > * setserial/autosave-types: autosave once
> > >
> > >
> >
> --
> Dr. Oliver Muth <oliver@athlon-9.bjoernsjoe>
>
>
--
--- Ola Lundqvist systemkonsult --- M Sc in IT Engineering ----
/ ola@opalsys.net Annebergsslingan 37 \
| opal@debian.org 654 65 KARLSTAD |
| http://www.opal.dhs.org Mobile: +46 (0)70-332 1551 |
\ gpg/f.p.: 7090 A92B 18FE 7994 0C36 4FE4 18A1 B1CF 0FE5 3DD9 /
---------------------------------------------------------------
Reply to: