Bug#309551: 2.6.x kernel won't boot on an Itanium machine
Package: kernel-image-2.6.11-1-mckinley
Version: 2.6.11-1
I have a Dell PowerEdge 3250, that won't boot any of the 2.6 kernels I
throw at it (not even from the install CD). In the best instance
(pasted below), it will attempt to mount root on VFS, then pause and
reboot. So far, any 2.4 kernel that I try will boot just fine, it is
currently running 2.4.27-2. I'm not a linux guy, but I can follow
directions :).
Kernels that fail: 2.6.11-1-mckinley, 2.6.10-1-mckinley,
2.6.8-3-mckinley, self-built 2.6.10 and
self-built 2.6.8.
Kernels that work: 2.4.27-2-mckinley
(kernels are official debian builds, unless otherwise noted)
/etc/elilo.conf:
...
image=/boot/vmlinuz-2.6.11-1-mckinley
label=Linux-2.6.11
root=/dev/sda2
read-only
append="console=ttyS1,9600,8n1 debug initcall_debug"
initrd=/boot/initrd.img-2.6.11-1-mckinley
...
Loading.: Debian GNU/Linux
Starting: Debian GNU/Linux
ELILO
ELILO boot: Linux-2.6.11
Uncompressing Linux... done
Loading initrd \EFI\debian\boot\initrd.img-2.6.11-1-mckinley...done
Linux version 2.6.11-1-mckinley (dannf@biglpk) (gcc version 3.3.5
(Debian 1:3.3.5-12)) #1 Sat Mar 26 21:49:57 MST 2005 EFI v1.10 by
INTEL: SALsystab=0x3fe4c8c0 ACPI=0x3ffa2000 ACPI 2.0=0x3ffa1000
INTEL: MPS=0x3ffa0000 SMBIOS=0xf0000 booting generic kernel on
platform dig ACPI: RSDP (v002 INTEL ) @
0x000000003ffa1000 ACPI: XSDT (v001 INTEL SR870BH2 0x01072002 MSFT
0x00010013) @ 0x000000003ffa1090 ACPI: FADT (v003 INTEL SR870BH2
0x01072002 MSFT 0x00010013) @ 0x000000003ffa1138 ACPI: MADT (v001
INTEL SR870BH2 0x01072002 MSFT 0x00010013) @ 0x000000003ffa1230 ACPI:
DSDT (v001 Intel SR870BH2 0x00000000 MSFT 0x0100000d) @
0x0000000000000000 efi.trim_top: ignoring 4KB of memory at 0x0 due to
granule hole at 0x0 efi.trim_top: ignoring 24KB of memory at 0x1000 due
to granule hole at 0x0 efi.trim_top: ignoring 8KB of memory at 0x7000
due to granule hole at 0x0 efi.trim_top: ignoring 484KB of memory at
0x9000 due to granule hole at 0x0 efi.trim_top: ignoring 4KB of memory
at 0x84000 due to granule hole at 0x0 efi.trim_top: ignoring 108KB of
memory at 0x85000 due to granule hole at 0x0 efi.trim_bottom: ignoring
15360KB of memory at 0x100000 due to granule hole at 0x0 Initial
ramdisk at: 0xe00000003c21e000 (6995968 bytes) SAL 3.1: Intel
Corp SR870BH2 version 3.0
SAL Platform features: BusLock IRQ_Redirection iosapic_system_init:
Disabling PC-AT compatible 8259 interrupts ACPI: Local APIC address
c0000000fee00000 ACPI: [APIC:0x07] ignored 1 entries of 2 found
PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0xc018) vector
30 register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-
level 1 CPUs available, 1 CPUs total MCA related initialization done
Virtual mem_map starts at 0xa0007fffffc80000
On node 0 totalpages: 63284
DMA zone: 63284 pages, LIFO batch:4
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/boot/
vmlinuz-2.6.11-1-mckinley root=/dev/sda2 console=ttyS1,9600,8n1 debug
initcall_debug ro PID hash table entries: 2048 (order: 11, 65536 bytes)
CPU 0: base freq=199.457MHz, ITC ratio=10/2, ITC freq=997.285MHz
Console: colour VGA+ 80x25 Placing software IO TLB between 0x13d4000 -
Console: 0x1bd4000
Memory: 1000000k/1012544k available (4024k code, 25664k reserved,
2096k data, 336k init) McKinley Errata 9 workaround not needed;
disabling it Calibrating delay loop... 1494.72 BogoMIPS (lpj=729088)
Security Framework v1.0.0 initialized
Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 5, 524288 bytes)
Mount-cache hash table entries: 1024 (order: 0, 16384 bytes)
checking if image is initramfs...it isn't (bad gzip magic numbers);
looks like an initrd Freeing initrd memory: 6816kB freed
Calling initcall 0xa0000001004a8680: init_elf32_binfmt+0x0/0x40()
Calling initcall 0xa0000001004aa940: helper_init+0x0/0xa0()
Calling initcall 0xa0000001004ab0b0: pm_init+0x0/0x80()
Calling initcall 0xa0000001004ab380: ksysfs_init+0x0/0x80()
Calling initcall 0xa0000001004abb70: filelock_init+0x0/0x80()
Calling initcall 0xa0000001004ad0c0: init_script_binfmt+0x0/0x40()
Calling initcall 0xa0000001004ad130: init_elf_binfmt+0x0/0x40()
Calling initcall 0xa0000001004aa190: netlink_proto_init+0x0/0x3c0()
NET: Registered protocol family 16
Calling initcall 0xa0000001004a7a30: kobject_uevent_init+0x0/0xa0()
Calling initcall 0xa0000001004a8df0: pcibus_class_init+0x0/0x40()
Calling initcall 0xa0000001004a80a0: pci_driver_init+0x0/0x40()
Calling initcall 0xa0000001004ab070: tty_class_init+0x0/0x80()
Calling initcall 0xa00000010049dc80: register_node_type+0x0/0x40()
Calling initcall 0xa0000001004ad2c0: pm_sysrq_init+0x0/0x60()
Calling initcall 0xa0000001004aa630: init_bio+0x0/0x160()
Calling initcall 0xa00000010049ddf0: fbmem_init+0x0/0x140()
Calling initcall 0xa0000001004aa000: acpi_init+0x0/0x100()
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
Calling initcall 0xa0000001004aa0b0: acpi_pci_root_init+0x0/0x40()
Calling initcall 0xa0000001004aa1e0: acpi_pci_link_init+0x0/0xa0()
Calling initcall 0xa0000001004aa300: acpi_power_init+0x0/0x100()
Calling initcall 0xa0000001004aa390: acpi_system_init+0x0/0x1a0()
Calling initcall 0xa0000001004ad210: acpi_event_init+0x0/0x80()
Calling initcall 0xa0000001004aa6c0: acpi_scan_init+0x0/0xe0()
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.H2PB._PRT]
ACPI: PCI Root Bridge [PCI1] (00:02)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.P2PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.P2PB._PRT]
ACPI: PCI Root Bridge [PCI2] (00:05)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.P2PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.P2PB._PRT]
ACPI: Device [CSFF] status [00000008]: functional but not present;
setting present ACPI: PCI Root Bridge [CSFF] (00:ff)
Calling initcall 0xa0000001004ad620: misc_init+0x0/0x140()
Calling initcall 0xa0000001004ab960: genhd_device_init+0x0/0xa0()
Calling initcall 0xa0000001004a7230: input_init+0x0/0x240()
Calling initcall 0xa0000001004a9e90: pci_acpi_init+0x0/0x240()
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
Calling initcall 0xa0000001004ad460: sba_init+0x0/0xe0()
Calling initcall 0xa0000001004abb10: sn_pci_init+0x0/0x200()
Calling initcall 0xa0000001004a7d90: net_dev_init+0x0/0x340()
Calling initcall 0xa0000001004a9e10: pktsched_init+0x0/0x1c0()
Calling initcall 0xa0000001004a9e70: tc_filter_init+0x0/0x80()
Calling initcall 0xa0000001004a6e90: init_pipe_fs+0x0/0xc0()
Calling initcall 0xa0000001004aa730: acpi_motherboard_init+0x0/0x80()
Calling initcall 0xa0000001004ac100: chr_dev_init+0x0/0x160()
Calling initcall 0xa00000010049f6f0: pfm_init+0x0/0x680()
perfmon: version 2.0 IRQ 238
perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
Calling initcall 0xa0000001004a8990: salinfo_init+0x0/0x400()
Calling initcall 0xa0000001004a8e40: create_gate_table+0x0/0x3a0()
Calling initcall 0xa0000001004a90e0: ia64_mca_late_init+0x0/0x220()
Calling initcall 0xa0000001004a6950: topology_init+0x0/0x200()
Calling initcall 0xa0000001004a9510: pfm_default_smpl_init_module
+0x0/0xe0() perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Calling initcall 0xa0000001004a85a0: ia32_init+0x0/0x120()
Calling initcall 0xa0000001004a86c0: check_elf32_binfmt+0x0/0xc0()
Calling initcall 0xa0000001004a9740: create_proc_profile+0x0/0xe0()
Calling initcall 0xa0000001004a96b0: ioresources_init+0x0/0xc0()
Calling initcall 0xa0000001004ab9c0: uid_cache_init+0x0/0x100()
Calling initcall 0xa0000001004aa460: param_sysfs_init+0x0/0x60()
Calling initcall 0xa0000001004aa830: init_posix_timers+0x0/0x1c0()
Calling initcall 0xa0000001004aac60: init+0x0/0xc0()
Calling initcall 0xa00000010049eee0: kallsyms_init+0x0/0x80()
Calling initcall 0xa0000001004ab2f0: ikconfig_init+0x0/0x80()
Calling initcall 0xa0000001004abe00: init_per_zone_pages_min+0x0/0xc0()
Calling initcall 0xa0000001004a9d60: pdflush_init+0x0/0x60()
Calling initcall 0xa0000001004a9ee0: cpucache_init+0x0/0x40()
Calling initcall 0xa0000001004aa260: kswapd_init+0x0/0x100()
Calling initcall 0xa0000001004ad180: gate_vma_init+0x0/0x80()
Calling initcall 0xa0000001004aac10: procswaps_init+0x0/0x80()
Calling initcall 0xa0000001004abdf0: init_tmpfs+0x0/0x180()
Calling initcall 0xa0000001004ab7b0: fasync_init+0x0/0x80()
Calling initcall 0xa0000001004ac300: aio_setup+0x0/0xe0()
Calling initcall 0xa0000001004acec0: eventpoll_init+0x0/0x1e0()
Calling initcall 0xa0000001004acf50: init_sys32_ioctl+0x0/0x120()
Calling initcall 0xa0000001004ad2a0: dquot_init+0x0/0x260()
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
Calling initcall 0xa0000001004ad5a0: dnotify_init+0x0/0x80()
Calling initcall 0xa0000001004a5b70: init_devpts_fs+0x0/0xc0()
Calling initcall 0xa0000001004a5c40: init_cramfs_fs+0x0/0x60()
Calling initcall 0xa0000001004a5cd0: init_ramfs_fs+0x0/0x40()
Calling initcall 0xa0000001004a5fe0: init_devfs_fs+0x0/0x240()
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Calling initcall 0xa0000001004aa370: ipc_init+0x0/0x60()
Calling initcall 0xa0000001004aa7b0: init_mqueue_fs+0x0/0x1a0()
Calling initcall 0xa0000001004a6040: key_proc_init+0x0/0xa0()
Calling initcall 0xa0000001004a6450: init_crypto+0x0/0x60()
Initializing Cryptographic API
Calling initcall 0xa0000001004a9020: pci_init+0x0/0x80()
Calling initcall 0xa0000001004a7a20: pci_sysfs_init+0x0/0xa0()
Calling initcall 0xa0000001004a85b0: pci_proc_init+0x0/0x140()
Calling initcall 0xa0000001004a0a40: asiliantfb_init+0x0/0xa0()
Calling initcall 0xa0000001004aa1d0: irqrouter_init_sysfs+0x0/0x60()
Calling initcall 0xa0000001004adf40: rand_initialize+0x0/0x220()
Calling initcall 0xa0000001004ab080: tty_init+0x0/0x480()
Calling initcall 0xa0000001004ab2b0: pty_init+0x0/0x60()
Calling initcall 0xa0000001004a2300: scdrv_init+0x0/0x660()
Calling initcall 0xa0000001004abdc0: efi_rtc_init+0x0/0x140()
EFI Time Services Driver v0.4
Calling initcall 0xa0000001004abfe0: serio_init+0x0/0x100()
Calling initcall 0xa0000001004a4470: i8042_init+0x0/0x3a0()
Calling initcall 0xa0000001004ac9f0: serial8250_init+0x0/0x180()
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled Calling initcall 0xa0000001004acaa0: acpi_serial_init+0x0/0x40()
acpi_serial_port: zero-length IO port range?
ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
acpi_serial_port: zero-length IO port range?
ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
Calling initcall 0xa0000001004acc90: serial8250_pci_init+0x0/0x40()
Calling initcall 0xa0000001004acfb0: sn_sal_module_init+0x0/0x200()
Calling initcall 0xa00000010049f970: elevator_global_init+0x0/0x20()
Calling initcall 0xa0000001004a60d0: noop_init+0x0/0x40()
io scheduler noop registered
Calling initcall 0xa0000001004ac390: as_init+0x0/0xe0()
io scheduler anticipatory registered
Calling initcall 0xa0000001004a69b0: deadline_init+0x0/0xe0()
io scheduler deadline registered
Calling initcall 0xa0000001004ad050: cfq_init+0x0/0xc0()
io scheduler cfq registered
Calling initcall 0xa0000001004a6f50: rd_init+0x0/0x3c0()
RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
Calling initcall 0xa0000001004a6fc0: net_olddevs_init+0x0/0xe0()
Calling initcall 0xa0000001004a72f0: mousedev_init+0x0/0x1e0()
mice: PS/2 mouse device common for all mice
Calling initcall 0xa0000001004a50b0: atkbd_init+0x0/0x40()
Calling initcall 0xa0000001004a97e0: init_soundcore+0x0/0xe0()
Calling initcall 0xa0000001004a79d0: sn_salinfo_init+0x0/0x40()
Calling initcall 0xa0000001004a01f0: prominfo_init+0x0/0x2e0()
Calling initcall 0xa0000001004ab7d0: flow_cache_init+0x0/0x160()
Calling initcall 0xa0000001004a9580: llc_init+0x0/0x100()
Calling initcall 0xa0000001004a6b80: snap_init+0x0/0x80()
Calling initcall 0xa0000001004a6e10: rif_init+0x0/0x120()
Calling initcall 0xa0000001004ac060: inet_init+0x0/0x420()
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP established hash table entries: 131072 (order: 6, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 5, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
Calling initcall 0xa0000001004ad4c0: af_unix_init+0x0/0x100()
NET: Registered protocol family 1
Calling initcall 0xa0000001004ad750: packet_init+0x0/0xb0()
NET: Registered protocol family 17
Calling initcall 0xa0000001004a7260: acpi_poweroff_init+0x0/0x80()
Calling initcall 0xa0000001004aaa80: seqgen_init+0x0/0x40()
Calling initcall 0xa0000001004ac920: serial8250_late_console_init
+0x0/0x60() Calling initcall 0xa0000001004acd60:
early_uart_console_switch+0x0/0x160() Calling initcall
0xa0000001004aa9b0: net_random_reseed+0x0/0x60() RAMDISK: cramfs
0xa0000001004aa9b0: filesystem found at block 0
RAMDISK: Loading 6832KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
(pause and bounce)
Reply to: