[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#301486: marked as done (kernel-image-2.6.8-2-generic: Aiee, killing interrupt handler!)



Your message dated Tue, 12 Apr 2005 02:02:15 -0400
with message-id <E1DLETX-0005DD-00@newraff.debian.org>
and subject line Bug#301486: fixed in kernel-image-2.6.8-alpha 2.6.8-9
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--------------------------------------
Received: (at submit) by bugs.debian.org; 26 Mar 2005 10:09:26 +0000
>From florian@hars.de Sat Mar 26 02:09:26 2005
Return-path: <florian@hars.de>
Received: from mail-in-06.arcor-online.net [151.189.21.46] 
	by spohr.debian.org with esmtp (Exim 3.35 1 (Debian))
	id 1DF8EP-0004Zs-00; Sat, 26 Mar 2005 02:09:26 -0800
Received: from alpha.local (dialin-145-254-045-106.arcor-ip.net [145.254.45.106])
	by mail-in-06.arcor-online.net (Postfix) with ESMTP id 4925D111A3D
	for <submit@bugs.debian.org>; Sat, 26 Mar 2005 11:08:56 +0100 (CET)
Received: from hars by alpha.local with local (Exim 4.44)
	id 1DF7yl-0000JY-Sa
	for submit@bugs.debian.org; Sat, 26 Mar 2005 10:53:15 +0100
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
From: Florian Hars <florian@hars.de>
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: kernel-image-2.6.8-2-generic: Aiee, killing interrupt handler!
X-Mailer: reportbug 3.8
Date: Sat, 26 Mar 2005 10:53:15 +0100
Message-Id: <E1DF7yl-0000JY-Sa@alpha.local>
Delivered-To: submit@bugs.debian.org
X-Spam-Checker-Version: SpamAssassin 2.60-bugs.debian.org_2005_01_02 
	(1.212-2003-09-23-exp) on spohr.debian.org
X-Spam-Status: No, hits=-8.0 required=4.0 tests=BAYES_00,HAS_PACKAGE 
	autolearn=no version=2.60-bugs.debian.org_2005_01_02
X-Spam-Level: 

Package: kernel-image-2.6.8-2-generic
Version: 2.6.8-7
Severity: important


I think the following boot log contains all information. 2.4.27-2 doesn't
load the ohci driver, but instead later loads the uhci one (which doesn't 
work with the one USB stick I have at hand now. but that is something else).
That SCSI error message looks intimidating, too.

Linux version 2.6.8-2-generic (tretkowski@bastille) (gcc version 3.3.5 (Debian 1:3.3.5-6)) #1 Tue Jan 25 21:48:47 UTC 2005
Booting GENERIC on Miata using machine vector Miata from SRM
Major Options: LEGACY_START 
Command line: ro  root=/dev/hda3 console=ttyS0
memcluster 0, usage 1, start        0, end      236
memcluster 1, usage 0, start      236, end    32767
memcluster 2, usage 1, start    32767, end    32768
freeing pages 236:384
freeing pages 814:32767
reserving pages 814:815
Initial ramdisk at: 0xfffffc000f920000 (6021120 bytes)
pci: cia revision 1 (pyxis)
Built 1 zonelists
Kernel command line: ro  root=/dev/hda3 console=ttyS0
PID hash table entries: 1024 (order 10: 16384 bytes)
HWRPB cycle frequency bogus.  Estimated 499842521 Hz
Using epoch = 2000
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 5, 262144 bytes)
Memory: 247968k/262136k available (1899k kernel code, 11992k reserved, 544k data, 280k init)
Calibrating delay loop... 992.88 BogoMIPS
Security Scaffold v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 8192 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 5880k freed
NET: Registered protocol family 16
EISA bus registered
pci: passed tb register update test
pci: passed sg loopback i/o read test
pci: passed pte write cache snoop test
pci: failed valid tag invalid pte reload test (mcheck; workaround available)
pci: passed pci machine check test
pci: tbia workaround enabled
pci: enabling save/restore of SRM state
PCI: Bus 1, bridge: 0000:00:14.0
  IO window: 8000-8fff
  MEM window: 09000000-090fffff
  PREFETCH window: 09100000-091fffff
SMC37c669 Super I/O Controller found @ 0x370
Linux Plug and Play Support v0.97 (c) Adam Belay
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 36 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Raw Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 5880 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 280k freed
initrd-tools: 0.1.77
NET: Registered protocol family 1
SCSI subsystem initialized
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CY82C693: IDE controller at PCI slot 0000:00:07.1
CY82C693: chipset revision 0
CY82C693: not 100% native mode: will probe irqs later
CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)
    ide0: BM-DMA at 0x9080-0x9087, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x9088-0x908f, BIOS settings: hdc:DMA, hdd:pio
hda: IC35L040AVVA07-0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=65535/16/63, (U)DMA
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 p5 p6 p7
hdc: CD-ROM F565E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
INIT: version 2.86 booting
Mounting a tmpfs over /dev...done.
Creating initial device nodes...done.
Setting parameters of disc: (none).
Activating swap.
Adding 761696k swap on /dev/hda5.  Priority:-1 extents:1
Checking root file system...
fsck 1.35 (28-Feb-2004)
/: clean, 108655/645120 files, 5EXT3 FS on hda3, 55797/1289062 blinternal journal
ocks
System time was Sat Mar 26 09:36:53 UTC 2005.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Sat Mar 26 09:36:55 UTC 2005.
Cleaning up ifupdown...done.
Calculating module dependencies... done.
Loading modules...
    ide-cd
hdc: ATAPI 32X CD-ROM drive, 128kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
    ide-detect
FATAL: Module ide_detect not found.
    ide-disk
All modules loaded.
Checking all file systems...
fsck 1.35 (28-Feb-2004)
/boot: clean, 27/39120 files, 20787/78125 blocks
/home: clean, 10675/3866624 files, 238153/7722933 blocks
/tmp: clean, 13/195456 files, 32795/390625 blocks
/var: clean, 6980/366528 files, 50737/732422 blocks
Setting kernel variables ...
... done.
Mounting local filesystems...
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/hda2 on /boot type ext2 (rw)
/dev/hda7 on /home type ext3 (rw)
/dev/hda6 on /tmp type ext3 (rw)
/dev/hda4 on /var type ext3 (rw)
Cleaning /tmp /var/run /var/lock.
Detecting hardware: de4x5 qlogicisp
de4x5 disabled in configuration.
Loading qlogicisp module.
ERROR: SCSI host `isp1020' has no error handling
ERROR: This is not a safe way to run your SCSI host
ERROR: The error handling must be added to this driver
fffffc000fb2bdf8 fffffffc00385db0 fffffffc0026a390 fffffffc00386968 
       fffffffc00386968 fffffc000febb800 fffffffc00386968 0000000000000000 
       fffffc0000000000 fffffc000fb2be40 fffffc000fb2be40 fffffc000febb800 
       fffffffc00370047 fffffffc00386968 fffffffc0037a08c fffffffc00386968 
       fffffc000059e800 0000000000000000 fffffffc0026204c fffffffc00386968 
       fffffc000059e800 fffffffc00386a48 fffffc000059e800 fffffc000059c778 
Trace:
[<fffffc000034ddcc>] sys_init_module+0x1cc/0x3d0
[<fffffc0000315244>] entSys+0xa4/0xc0

qlogicisp : new isp1020 revision ID (5)
scsi0 : QLogic ISP1020 SCSI on PCI bus 01 device 20 irq 27 I/O base 0x8000
Running 0dns-down to make sure resolv.conf is ok...done.
Setting up networking...done.
Starting hotplug subsystem:
   pci     
Linux Tulip driver version 1.1.13 (May 11, 2002)
tulip0:  EEPROM default media type Autosense.
tulip0:  Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
tulip0:  Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
tulip0:  Index #2 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block.
tulip0:  Index #3 - Media AUI (#2) described by a 21142 Serial PHY (2) block.
tulip0:  Index #4 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip0:  MII transceiver #5 config 0000 status 7849 advertising 01e1.
eth0: Digital DS21143 Tulip rev 48 at 0x9000, 08:00:2B:86:37:5A, IRQ 24.
     tulip: loaded successfully
     cy82c693: already loaded
     cy82c693: already loaded
     cy82c693: already loaded
     cy82c693: already loaded
usbcore: registered new driver usbfs
usbcore: registered new driver hub
     ohci-hcd: loaded successfully
     ignoring pci display device on 00:0b.0
qla1280: QLA1040 found on PCI bus 1, dev 4
Unable to handle kernel paging request at virtual address 00000000000001c8
swapper(0): Oops 1
pc = [<fffffffc0037ad08>]  ra = [<fffffffc0037ad08>]  ps = 0007    Not tainted
v0 = 0000000000040000  t0 = 0000000000040000  t1 = fffffffc0037ae58
t2 = 0000000000000004  t3 = fffffc0000d3e000  t4 = fffffc0000623c5c
t5 = fffffc000f6a0948  t6 = 00000000fffc25cc  t7 = fffffc0000590000
s0 = fffffc0000d3e1c0  s1 = 0000000000000000  s2 = 0000000000000000
s3 = fffffc000f61c000  s4 = fffffc000f61c2d8  s5 = 000000000000a5a5
s6 = fffffc0000623570
a0 = 0000000000400100  a1 = 0000000000010000  a2 = fffffc0000593d70
a3 = fffffc0000593d70  a4 = fffffc0000d882d8  a5 = 0000000000000000
t8 = 000000000000001f  t9 = 00000000d8df02b1  t10= 0000000000000000
t11= 000000000000000a  pv = fffffc00003220e0  at = fffffc000fbe7bc8
gp = fffffffc0037ef46  sp = fffffc0000593c90
Trace:
[<fffffc000031a164>] handle_IRQ_event+0x74/0xf0
[<fffffc000031ab50>] handle_irq+0xe0/0x1c0
[<fffffc0000327a10>] miata_srm_device_interrupt+0x30/0x50
[<fffffc000031b1f4>] do_entInt+0xf4/0x140
[<fffffc0000315260>] ret_from_sys_call+0x0/0x10
[<fffffc00004e9ea0>] schedule+0x330/0x4d0
[<fffffc000032c830>] finish_task_switch+0x0/0xe0
[<fffffc000032c874>] finish_task_switch+0x44/0xe0
[<fffffc00004e9ea0>] schedule+0x330/0x4d0
[<fffffc0000316e78>] cpu_idle+0x38/0x80
[<fffffc0000316e30>] default_idle+0x0/0x10
[<fffffc0000310234>] rest_init+0x34/0x50
[<fffffc000031001c>] __start+0x1c/0x20

Code: c3ffffc3  2ffe0000  47ff041f  2ffe0000  47e90410  d3400044 <b00a01c8> c3ffffb6 
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
 

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: alpha
Kernel: Linux 2.4.27-2-generic
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)

Versions of packages kernel-image-2.6.8-2-generic depends on:
ii  coreutils [fileutils]         5.2.1-2    The GNU core utilities
ii  initrd-tools                  0.1.77     tools to create initrd image for p
ii  module-init-tools             3.2-pre1-2 tools for managing Linux kernel mo

-- no debconf information

---------------------------------------
Received: (at 301486-close) by bugs.debian.org; 12 Apr 2005 06:09:43 +0000
>From katie@ftp-master.debian.org Mon Apr 11 23:09:43 2005
Return-path: <katie@ftp-master.debian.org>
Received: from newraff.debian.org [208.185.25.31] (mail)
	by spohr.debian.org with esmtp (Exim 3.35 1 (Debian))
	id 1DLEal-0003BM-00; Mon, 11 Apr 2005 23:09:43 -0700
Received: from katie by newraff.debian.org with local (Exim 3.35 1 (Debian))
	id 1DLETX-0005DD-00; Tue, 12 Apr 2005 02:02:15 -0400
From: Norbert Tretkowski <nobse@debian.org>
To: 301486-close@bugs.debian.org
X-Katie: $Revision: 1.55 $
Subject: Bug#301486: fixed in kernel-image-2.6.8-alpha 2.6.8-9
Message-Id: <E1DLETX-0005DD-00@newraff.debian.org>
Sender: Archive Administrator <katie@ftp-master.debian.org>
Date: Tue, 12 Apr 2005 02:02:15 -0400
Delivered-To: 301486-close@bugs.debian.org
X-Spam-Checker-Version: SpamAssassin 2.60-bugs.debian.org_2005_01_02 
	(1.212-2003-09-23-exp) on spohr.debian.org
X-Spam-Status: No, hits=-6.0 required=4.0 tests=BAYES_00,HAS_BUG_NUMBER 
	autolearn=no version=2.60-bugs.debian.org_2005_01_02
X-Spam-Level: 

Source: kernel-image-2.6.8-alpha
Source-Version: 2.6.8-9

We believe that the bug you reported is fixed in the latest version of
kernel-image-2.6.8-alpha, which is due to be installed in the Debian FTP archive:

kernel-headers-2.6.8-2-generic_2.6.8-9_alpha.deb
  to pool/main/k/kernel-image-2.6.8-alpha/kernel-headers-2.6.8-2-generic_2.6.8-9_alpha.deb
kernel-headers-2.6.8-2-smp_2.6.8-9_alpha.deb
  to pool/main/k/kernel-image-2.6.8-alpha/kernel-headers-2.6.8-2-smp_2.6.8-9_alpha.deb
kernel-headers-2.6.8-2_2.6.8-9_alpha.deb
  to pool/main/k/kernel-image-2.6.8-alpha/kernel-headers-2.6.8-2_2.6.8-9_alpha.deb
kernel-image-2.6.8-2-generic_2.6.8-9_alpha.deb
  to pool/main/k/kernel-image-2.6.8-alpha/kernel-image-2.6.8-2-generic_2.6.8-9_alpha.deb
kernel-image-2.6.8-2-smp_2.6.8-9_alpha.deb
  to pool/main/k/kernel-image-2.6.8-alpha/kernel-image-2.6.8-2-smp_2.6.8-9_alpha.deb
kernel-image-2.6.8-alpha_2.6.8-9.dsc
  to pool/main/k/kernel-image-2.6.8-alpha/kernel-image-2.6.8-alpha_2.6.8-9.dsc
kernel-image-2.6.8-alpha_2.6.8-9.tar.gz
  to pool/main/k/kernel-image-2.6.8-alpha/kernel-image-2.6.8-alpha_2.6.8-9.tar.gz



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 301486@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Norbert Tretkowski <nobse@debian.org> (supplier of updated kernel-image-2.6.8-alpha package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.7
Date: Sun, 10 Apr 2005 19:39:45 +0200
Source: kernel-image-2.6.8-alpha
Binary: kernel-image-2.6.8-2-smp kernel-image-2.6.8-2-generic kernel-headers-2.6.8-2-generic kernel-headers-2.6.8-2-smp kernel-headers-2.6.8-2
Architecture: source alpha
Version: 2.6.8-9
Distribution: unstable
Urgency: high
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Norbert Tretkowski <nobse@debian.org>
Description: 
 kernel-headers-2.6.8-2 - Header files related to Linux kernel version 2.6.8
 kernel-headers-2.6.8-2-generic - Linux kernel headers 2.6.8 on Alpha
 kernel-headers-2.6.8-2-smp - Linux kernel headers 2.6.8 on Alpha SMP
 kernel-image-2.6.8-2-generic - Linux kernel image for version 2.6.8 on Alpha.
 kernel-image-2.6.8-2-smp - Linux kernel image for version 2.6.8 on Alpha SMP.
Closes: 301486
Changes: 
 kernel-image-2.6.8-alpha (2.6.8-9) unstable; urgency=high
 .
   * Depend on initrd-tools >= 0.1.78. (closes: #301486)
   * Disabled CONFIG_SCSI_QLOGIC_ISP, we now have CONFIG_SCSI_QLOGIC_1280_1040.
Files: 
 fa351db88372e8db1df5efdb820ee79d 792 devel optional kernel-image-2.6.8-alpha_2.6.8-9.dsc
 8bbf79c3e01bd775fdfeaf225375782e 37380 devel optional kernel-image-2.6.8-alpha_2.6.8-9.tar.gz
 254ac0f99261834297ad4fb90370598c 2757840 devel optional kernel-headers-2.6.8-2_2.6.8-9_alpha.deb
 c6e3de36b51fac8a174cba2fa73fc53c 225526 devel optional kernel-headers-2.6.8-2-smp_2.6.8-9_alpha.deb
 12bd8113ff8ef4008f108e1cae3e5eec 20072440 base optional kernel-image-2.6.8-2-smp_2.6.8-9_alpha.deb
 84b02868857c8b27e47318bb9b0bc123 230738 devel optional kernel-headers-2.6.8-2-generic_2.6.8-9_alpha.deb
 9ff24661e56df0e4e45af70283148606 20216656 base optional kernel-image-2.6.8-2-generic_2.6.8-9_alpha.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)

iD8DBQFCW2Hrr/RnCw96jQERAo00AJ9DCaFhv3AiI4k9JzXtUuChmdUQhgCeMyk1
tCVhF3ArgRQ8EjtmQX2yDc0=
=4AnH
-----END PGP SIGNATURE-----



Reply to: